Middle Atlantic RK-GD8 Instructions

Instruction Sheet

RK-GDXX

Glass Door

THANK YOU

Thank you for purchasing the RK-GDXX Glass Door. Please read these instructions thoroughly
before installing this product.

PRODUCT FEATURES

- Locking door provides security

- Smoked, tempered glass provides a clean look

I-00189 Rev D

HARDWARE/ITEMS SUPPLIED

QTY

2

2

2

2

2

2

1

1

DESCRIPTION

Self-Adhesive Hinge Plate

Hinge

Pivot Bushing (.347” O.D.)

Pivot Bushing (.313 O.D.)

5/8" Pan Head Wood Screw

Stop Pin

Locking Bracket

Magnet

TOOLS REQUIRED

# 2 Phillips Head Screwdriver or Power Driver with Bit

Door

(QTY -1)

BEFORE BEGINNING INSTALLATION

1) Move the rackrail to the recessed set of enclosure mounting holes using existing wood screws.

RACKRAIL

WOOD

SCREW

NOTE: When moving front rackrail to setback position, mount rail to recessed pilot holes on opposite
end of side panel. This hides the original mounting holes from view.

Page 2

INSTALLATION

1) Determine desired hinge side and install
pivot bushings in top and bottom of rack.

(FIGURE A)

NOTE: Two bushing sizes are provided.

Use appropriate size bushing for your rack.

2) Remove adhesive backing and install both
hinge plates on inside of glass door. (FIGURE B)

HINGE

PLATES (2)

PLATE

HINGE

PIVOT

BUSHING

(TOP)

HINGE

PIVOT

BUSHING

(BOTTOM)

FIGURE A

TOP HINGE

BOTTOM

HINGE

FLUSH
EDGE

PIVOT

BUSHING

(BOTTOM)

SCREWS (2)

FIGURE B

FIGURE C

3) Slide bottom hinge against door and adjust so that hinge is flush with edge of door.

(FIGURE C, FIGURE D)

4) Tighten (2) screws to secure bottom hinge to hinge plate. (FIGURE C)

NOTE: Do not over tighten.

5) Pivot door into bottom pivot bushing. (FIGURE C)

LOCKING

BRACKET

6) Insert upper hinge into top pivot bushing and hold hinge in place with hand.

(FIGURE A)

7) Slide door into top hinge and adjust position of door, so that
hinge is flush with edge of door. (FIGURE D)

8) Tighten (2) screws to secure upper hinge to hinge plate.

NOTE: Do not over tighten.

WOOD SCREWS

9) If neccessary, adjust hinges to balance door opening gaps.

(2) PAN HEAD

10) Attach locking bracket opposite hinge side with (2) wood
screws provided. Install magnet as shown. (FIGURE E)

FIGURE D

MAGNET

FIGURE E

Page 3

INSTALLATION (CONTINUED)

11) Install the top and bottom stop pins opposite hinge side as shown. (FIGURE F)

NOTE: Pivot bushings and stop pins designed to fit snug. Tap in with handle of screwdriver if

necessary.

STOP PIN

FIGURE F

WARRANTY

Middle Atlantic Products (the "Company") warrants the RK-GDXX Glass Door to be free from defects in material or workmanship under

normal use and conditions for a period of (1) year from date of shipment by the Company.

The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty
shall be limited, at the Company's option, to either (a) return of and refund of the price paid for, or (b) repair or replacement at the
Company's factory of the products purchased, or any part or parts thereof, which the Company has determined to be defective after
inspection thereof at the Company's factory.

This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by parties other than the Company, or
any modification or alteration of the products. In addition, this warranty does not cover damage due to improper handling, assembly,
installation or maintenance.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF
THE USE OF THE PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY) HEREUNDER, IF ANY, SHALL IN NO
EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS PAID TO THE COMPANY.

Corporate Headquarters

Corporate Voice 973-839-1011 - Fax [phone] / International Voice [phone] - Fax [phone]
middleatlantic.com - [e-mail]

Middle Atlantic Canada

Voice 613-836-2501 - Fax [phone] / middleatlantic.ca - [e-mail]

Factory Distribution

USA: NJ - CA - IL Canada: ON - BC

At Middle Atlantic Products we are always listening. Your comments are welcome.

Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.