Page 1
use vertical
channels or
angles to
lace cable
bundles from
top to bottom
Installation Instructions
Lever L ock™ Series
use horizontal channels
in the top of the rack
to manage cables
between bays
install horizontal lacer
bars, angles, and
channels between
vertical Lever Lock
accessories, for strain
relief and cable
management
™
use vertical plates to
mount small devices
install horizontal
Lever Lock
angles, and channels
on any location on
rackrail brackets to
provide offset
cable management
™
lacer bars,
BGR Series Enclosure Options
Lever Lock™ TOOL FREE INTERNAL MANAGEMENT SYSTEM
PATENT PENDING
I-00508 Rev C
Page 2
Lever Lock ™ OPERATION EXAMPLE S
- Shown here is an example of Lever Lock™ operation
(horizontal installation shown).
- Included with the Lever Lock™ accessory are plastic securing
rivets. See page 3 for rivet installation.
- When using Din Rail, the clip must go to the outside if the rack.
- Face the flanges to the outside of the rack for the most usable
surface (plate and channel).
VERTICAL INSTALLATION
1) Insert the Lever Lock™ accessory into the mating slots in the top rackrail brackets. Ensure the lock
mechanism is installed in the bottom rackrail bracket for proper securement.
2) Fully insert into the top rackrail slots, and then push down into the corresponding slots in the lower
rackrail bracket to lock the accessory into place. The Lever Lock™ will click into place when
engaged.
Page 2
Page 3
HORIZONTAL INSTALLATION
1) Insert the Lever Lock™ accessory into the mating slots in the side rackrail brackets or vertical
Lever Lock ™.
NOTE: All horizontal Lever Lock™ accessories can be installed using any vertical Lever Lock™
accessory.
2) Fully insert into the opposite side rackrail slots, and then push into place to lock the accessory. The
Lever Lock™ will ‘click’ into place when engaged.
SECURING RIVET INSTALLATION
- Install plastic securing rivet into the inner holes as shown. This
rivet can be used for seismic installations and for transporting
a populated Lever Lock™ accessory.
Page 3
Page 4
- BGR Series Lever Lock™ usage table
USAGE TABLES
Compatible Lever Lock™ Accessories
Gangable
Part #
Stand-Alone
Part #
Vertical
Angle*
Vertical
Channel*
Horizontal
Round*
Horizontal
Channel*
Horizontal
Angle*
Horizontal 2"
Off-Set Angle
Horizontal 4”
Off-Set Angle
Vertical
Din Rail
Vertical 10"
Deep Plate
(7 pieces
BGR-1927 BGR-19SA-27 LL-VA17 LL-VC17 LL-HR21 LL-HC21 LL-HA21 LL-H2A21 LL-H4A21 LL-VDIN17 LL-VP1710
– BGR-19SA27MDK-xx LL-VA17 LL-VC17 LL-HR21 LL-HC21 LL-HA21 LL-H2A21 LL-H4A21 LL-VDIN17 LL-VP1710
BGR-2527 BGR-25SA-27 LL-VA21 LL-VC21 LL-HR21 LL-HC21 LL-HA21 LL-H2A21 LL-H4A21 LL-VDIN21 LL-VP2110 –
– BGR-25SA27MDK-xx LL-VA21 LL-VC21 LL-HR21 LL-HC21 LL-HA21 LL-H2A21 LL-H4A21 LL-VDIN21 LL-VP2110 –
BGR-2532 BGR-25SA-32 LL-VA21 LL-VC21 LL-HR21 LL-HC21 LL-HA21 LL-H2A21 LL-H4A21 LL-VDIN21 LL-VP2110 LL-MP21
– BGR-25SA32MDK-xx LL-VA21 LL-VC21 LL-HR21 LL-HC21 LL-HA21 LL-H2A21 LL-H4A21 LL-VDIN21 LL-VP2110 LL-MP21
BGR-3827 BGR-38SA-27 LL-VA21 LL-VC21 LL-HR21 LL-HC21 LL-HA21 LL-H2A21 LL-H4A21 LL-VDIN21 LL-VP2110 LL-MP21
BGR-3832 BGR-38SA-32 LL-VA21 LL-VC21 LL-HR21 LL-HC21 LL-HA21 LL-H2A21 LL-H4A21 LL-VDIN21 LL-VP2110 LL-MP21
BGR-4127 BGR-41SA-27 LL-VA17 LL-VC17 LL-HR21 LL-HC21 LL-HA21 LL-H2A21 LL-H4A21 LL-VDIN17 LL-VP1710 LL-MP21
BGR-4132 BGR-41SA-32 LL-VA17 LL-VC17 LL-HR21 LL-HC21 LL-HA21 LL-H2A21 LL-H4A21 LL-VDIN17 LL-VP1710 –
BGR-4138 – LL-VA17 LL-VC17 LL-HR21 LL-HC21 LL-HA21 LL-H2A21 LL-H4A21 LL-VDIN17 LL-VP1710 –
BGR-4527 BGR-45SA-27 LL-VA21 LL-VC21 LL-HR21 LL-HC21 LL-HA21 LL-H2A21 LL-H4A21 LL-VDIN21 LL-VP2110 –
BGR-4532 BGR-45SA-32 LL-VA21 LL-VC21 LL-HR21 LL-HC21 LL-HA21 LL-H2A21 LL-H4A21 LL-VDIN21 LL-VP2110 LL-MP21
BGR-4538 – LL-VA21 LL-VC21 LL-HR21 LL-HC21 LL-HA21 LL-H2A21 LL-H4A21 LL-VDIN21 LL-VP2110 LL-MP21
*Available in 4 packs. Please suffix part number with -4. **Multi packs include (2) LL-VC21, (4) LL-HA21, and (1) LL-VP2110
- DTRK Series Lever Lock™ usage table
Multi
Packs
total**)
Part #
DTRK Lever Lock™ Options
Lever Lock
™
Height
DTRK-718 –
DTRK-1018 LL-VA21 and LL-VC21
DTRK-1218 LL-VA21 and LL-VC21
DTRK-1418 LL-VA21 and LL-VC21
DTRK-1818 LL-VA21 and LL-VC21
NOTE: Requires LL-DTRK Lever Lock™ Kit
WARRANTY
Middle Atlantic Products, Inc. (the "Company") warrants the Lever Lock™ accessory to be free from defects in material or workmanship under normal use and conditions for the
lifetime of the product.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty shall be limited, at the Company's
option, to either (a) return of and refund of the price paid for, or (b) repair or replacement at the Company's factory of the products purchased, or any part or parts thereof,
which the Company has determined to be defective after inspection thereof at the Company's factory. This warranty does not cover damage due to acts of God,accident,
misuse, abuse or negligence by parties other than the Company, or any modification or alteration of the products. In addition, this warranty does not cover damage due to
improper handling, assembly, installation or maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR
ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF THE PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY) HEREUNDER, IF ANY, SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE OF THE PRODUCTS PAID TO THE COMPANY.
Corporate Headquarters
Corporate Voice 973-839-1011 - Fax 973-839-1976 / International Voice +1 973-839-8821 - Fax +1 973-839-4982
middleatlantic.com - info@middleatlantic.com
Middle Atlantic Canada
Voice 613-836-2501 - Fax 613-836-2690 / middleatlantic.ca - customerservicecanada@middleatlantic.ca
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Page 4
Loading...