Middle Atlantic LACE-37-OWP Users Manual

Instruction Sheet

LACE-OWP / LACE-OP

Vertical lacer Strips

UP

POSITION AS SHOWN

FOR INSTALLATION

LACE-OWP

THANK YOU
Thank you for purchasing the Vertical Lacer Strips. Please read these instructions

thoroughly before installing this product.

PRODUCT FEATURES

- Unique slot pattern includes tie posts for sliding
on pre-assembled cable bundles

LACE-OP

- Mounting holes accept Cage Nuts as well as PD Slim and PDT Series
vertical power strips

- Accepts cable ties and hook and loop straps up to 3/4” wide

I-00229 Rev B

PARTS

A) MOUNTING SCREW QTY C) LACER STRIP QTY

24

6

B) RECTANGLE NUT QTY

24

INSTALLATION

1) Mount Lacer Strip to Rackrail Brackets as shown using Mounting Screw and Rectangle Nut.
Strip can be mounted to Fixed Hole, or Adjustable Slot for ease of movement.
(Fixed Hole mounting shown - FIGURE A)

- 37, 40 and 44 space Lacer Strips use four mounting points

- 23 space Lacer Strips use two or three mounting points, R4 Series Rack side shown (FIGURE B)
NOTE: Certain series racks have only Fixed Hole or Adjustable Slot mounting

- 13 space Lacer Strips use two mounting points (FIGURE A)

Fixed Hole

Mounting Screw

FIGURE A

Rectangle Nut

Adjustable Slot

FIGURE B

Page 2