Page 1
UNIVERSAL FRONT DOOR
TOOLS REQUIRED
Hex Key (Provided)
#2 Phillips Driver
HINGE INSTALLATION
1) Determine door swing in order to
know what side to install hinges.
(FIGURE A)
NOTE: If two sets of mounting holes
are present, use the lower holes.
3) Install male hinge to the enclosure.
(FIGURE C)
NOTE: Hinge post ships with washer
preinstalled. If the washer has
come off during shipping, it
must be reinstalled.
FIGURE A
FIGURE C
2) Knock out cover plate (if installed)
and discard. (FIGURE B)
4) Install screws using a #2
Phillips driver. Install
decorative cap.
(FIGURE D)
FIGURE B
FIGURE D
5) Install female hinge to the door
using provided hex key.
(FIGURE E)
HOLE
FACING
DOWN
TOP OF DOOR
FIGURE E
6) Install the door.
(FIGURE F)
FIGURE F
I-00033 Rev L
Loading...