Middle Atlantic DWR-10-17 User Manual

96-045 / rev 11 / 11-13-06 / DWR Series Sectional Wall Rack

The DWR Series 19” wall mount rack is ideal when installing larger
systems in both secured and non-secured areas. Broadest range of
sizes available, with outstanding cable lacing features

96-045/ rev 11 / 11-13-06

• Available in 17”, 22” and 26” overall depths with 15”, 20” and 24” of useable depth

• Tool-Free Quick-Mount

TM

system allows for easy, one-person mounting of the center

section to the backpan on the jobsite

• Optional zero clearance latch allows side-by-side or corner mounting

• 16-gauge steel construction with 1/8” thick laser-cut corner braces

• Adjustable front rackrail, rear rackrail optional

• Center section hinges for left or right opening

• Cutouts for low-voltage Decora

®

devices in front and rear of center section, top and bottom

• Easily removable laser knockouts accommodate conduit, UHF/VHF antennas, Wiremold

®

4000 series reaceways, Middle Atlantic Products universal connector panels, electrical pull-box
and as many as four 4-1/2" fans

• Finished in a durable black or granite gray textured powder coat

• UL Listed in the US and Canada

Features

Architects’ and Engineers’ Specifications

DWR Series

Wall Mount Rack

EIA compliant 19” wall mount rack shall be Middle Atlantic Products model #
DWR-__-__ (refer to chart). Overall dimensions shall be 23.4" W x__" H x __" D
(refer to chart). Weight capacity shall be __ lbs. (refer to chart). Tool-Free
Quick-Mount

TM

system shall enable one-person installation. Useable depth shall
be __ (refer to chart) and shall extend into the backpan 3.5”. Center section and
backpan shall be 16-gauge steel, finished in a black or granite gray textured
powdercoat (black finish is standard, suffix part # with GY to indicate a granite gray
finish) . Rackrail shall be constructed of 11-gauge steel with tapped 10-32 mounting
holes in universal EIA spacing with black e-coat finish and marked rackspaces. Rack
shall be constructed to swing open for component cabling access, center section shall
pivot for either left or right opening. Backpan shall include raised mounting embosses
to mount power products and other accessories. Rack shall have 3/4”, 1”, 1-1/2”, 2”
and 3” electrical knockouts, four Decora

®

cutouts, and BNC knockouts for UHF/VHF
antennas knockouts top and bottom. Backpan shall have a 12-1/2” x 12-1/2” cutout
for electrical pull-box. Fan knockouts on top and bottom shall allow for installation of
up to four 4-1/2" fans. Rack shall include 2” and 4” knockouts for Wiremold

®

4000
series raceways and knockouts for Middle Atlantic Products universal connector panels.
Top, bottom and sides shall feature vertical vent pattern. Rack shall be UL Listed in the
US and Canada. Rack shall be warrantied to be free from defects in materials or
workmanship under normal use and conditions for the lifetime of the rack.

Engineered Mounting Solutions

electronic version available at middleatlantic.com

middleatlantic.com

Middle Atlantic Products, Inc.

DWR-24-22

OPTIONS

• Front doors shall be reinforced 16-gauge steel, model # FD-XX (solid), VFD-XX (vented,
22% open area), LVFD-XX (vented, 68% open area), PFD-XX (plexi), (XX= # of
rackspaces of DWR rack)

• Keyless Latch replaces keylock, fits front & rear doors, shall be models # LATCH

• Rear rail kit 11-gauge, 10-32 threaded, sold in pairs, hardware
included, shall be model # DWR-RRXX

• Vent Blockers used to promote active thermal management, shall be model #
VBK-D17 (fits DWR-XX-17), VBK-SD22 (fits DWR-XX-22),
VBK-E20 (fits DWR-XX-26)

• Zero clearance latch shall allow side-by-side or corner mounting, shall be model
# DWRSR-ZL

PATENT PENDING

US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: [phone] • middleatlantic.com

Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: [phone] • middleatlantic.ca

Important information regarding
useable depths!

SSEEEE PPAAGGEE 33

EIA/TIA Compliant

Backpan

Center Section

DWR Series basic dimensions

Middle Atlantic Products, Inc.

2x 2.25

[57]

SIDE VIEW

shown with

DWR rear
rackrail kit

DWR-RRXX

2x 1/4-20 x

1 grounding

/ bonding

stud in

center

section

2x 2.58 [66]
grounding /
bonding
stud

.625 [16] minimum

front rail setback

useable depth

15.0 [381] / 20.0 [508] /

24.0 [610]

23.40 [594]

4x cutout for Decora style

switch or devices

(2 front, 2 rear)

4x UHF / VHF

antenna KO 5/8”

2x UCP single

module KO

4x 2.88 [73]

2x 2.06 [52]

5.06 [129]

16.06
[408]

A

2.25 [57]

2.0 electrical KO
(see table for quantity)

1.80 [46]

16.06
[408]

A

5.06 [129]

2x 2.06 [52]
Wiremold 4000 series

raceway (see table
for quantity)

11.5 [292] / 16.5

[419] / 20.5 [521]

17.3 [439] / 22.3

[567] / 26.3 [668]

16.0

[406]

5.36
[136]

.406

[10]

12.50 sq.
knockout

mounting emboss for

power and other

accessories

FRONT VIEW

(CENTER SECTION)

SIDE VIEW FRONT VIEW

(BACK PAN)

US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: [phone] • middleatlantic.com

Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: [phone] • middleatlantic.ca

All dimensions in inches unless otherwise noted [All bracketed dimensions are in millimeters]

NOTES:

17”, 22” and 26” deep models
are represented in this drawing
(DWR-XX-17) / (DWR-XX-22) /
(DWR-XX-26)

overall depth

17.3 [439] / 22.3 [567] /

26.3 [668]

B

5.87
[149]

2X 1/4 - 20 X 1 Grounding /
bonding stud in back pan

2.69
[136]

Overall

height