Mid-Continent Instrument MD41-1844 Installation Manual And Operating Instructions

Installation Manual and Operating Instructions

MD41-1844

Annunciation Control Unit

for Lithium-ion Battery Systems

MD41-1844 28 VDC Horizontal Mount

Mid-Continent Instruments and Avionics

Mid-Continent Instrument Co., Inc.
dba Mid-Continent Instruments and Avionics
9400 E. 34th Street N.
Wichita, KS 67226 USA Manual Number 9018268
PH [phone] FX [phone] Revision A, May 18, 2015

®

FOREWORD

This manual provides information intended for use by persons who, in accordance with current
regulatory requirements, are qualified to install this equipment. If further information is required,
please contact:

Mid-Continent Instruments and Avionics

Attn: Customer Service Dept.

9400 E. 34th Street N.

Wichita, KS 67226 USA

PH [phone]
FX [phone]

www.mcico.com

We welcome your comments concerning this manual. Although every effort has been made to
keep it free of errors, some may occur. When reporting a specific problem, please describe it
briefly and include the manual part number, the paragraph/figure/table reference and the page
number. Send your comments to:

Mid-Continent Instruments and Avionics

Attn: Technical Publications

9400 E. 34th Street N.

Wichita, KS 67226 USA

PH [phone]
FX [phone]

[e-mail]

All products produced by Mid-Continent Instrument Co., Inc., including those identified as Mid­Continent Instruments and Avionics or True Blue Power

®

, are designed and manufactured in

Wichita, KS, USA.

 Copyright 2015

Mid-Continent Instruments and Avionics

Manual Number 9018268 2 Rev. A May 18, 2015

REVISION HISTORY

Rev. Date Detail

A 5/18/15 Production release.

Manual Number 9018268 3 Rev. A May 18, 2015

TABLE OF CONTENTS

SECTION 1 GENERAL DESCRIPTION 5

1.1 INTRODUCTION 5

1.2 TECHNICAL SPECIFICATIONS 5

1.2.1 Model 5

1.2.2 Physical Attributes 5

1.2.3 Performance 5

SECTION 2 PRE-INSTALLATION CONSIDERATIONS 6

2.1 COOLING 6

2.2 EQUIPMENT LOCATION 6

2.3 ROUTING OF CABLES 6

2.4 LIMITATIONS 6

2.5 TECHNICAL SPECIFICATIONS 6

SECTION 3 INSTALLATION PROCEDURE 7

3.1 GENERAL INFORMATION 7

3.2 UNPACKING AND INSPECTING 7

3.2.1 Included Parts 7

3.2.2 Available Parts 7

3.3 CABLE HARNESS 7

3.3.1 Lighting Controls 8

3.3.2 Power And Signals 8

3.3.3 Harness Verification 8

3.4 MOUNTING 9

SECTION 4 OPERATION 10

4.1 FRONT PANEL CONTROLS AND ANNUNCIATIONS 10

4.1.1 Controls 10

4.1.2 Annunciations 10

4.1.3 Additional Information 11

SECTION 5 CONFORMANCE 11

5.1 CONTINUED AIRWORTHINESS STATEMENT 11

APPENDIX 1 12
NUMBER LIST OF TABLES AND FIGURES

Table 1 Model 5
Table 1 Physical Attributes 5
Table 3 Performance 5
Figure 1 25 Pin D-Sub Rear View Connector Pinout 7
Table 4 25 Pin D-Sub Connector Pinout 7
Figure 2 Wiring Diagram 8
Figure 3 Outline Drawing 9
Figure 4 Front Panel 10

Manual Number 9018268 4 Rev. A May 18, 2015