Mid-Continent Instrument MD41-1510, MD41-1512, MD41-1514, MD41-1511, MD41-1513 Installation Manual And Operating Instructions
...
INSTALLATION MANUAL AND
OPERATING INSTRUCTIONS
MD41-151X Series
GPS Annunciation Control Unit
For Garmin GTN 6XX/7XX Systems
MD41-1510 28vdc Horizontal Mount
MD41-1512 14vdc Horizontal Mount
MD41-1514 28vdc Horizontal Mount, 5vdc lighting
MD41-1511 28vdc Vertical Mount
MD41-1513 14vdc Vertical Mount
MD41-1515 28vdc Vertical Mount, 5vdc lighting
REV. A February 21, 2011 MANUAL NUMBER 9017211
MID-CONTINENT INSTRUMENT CO., INC.
9400 E. 34
th
Street N., Wichita, KS 67226 USA
phone 316-630-0101 • fax 316-630-0723 • web www.mcico.com
REVISION DETAIL
Date Detail
Rev.
A 02/21/11 Initial release.
REV. A February 21, 2011 3 Manual Number 9017211
TABLE OF CONTENTS
SECTION 1 GENERAL DESCRIPTION
1.1 INTRODUCTION
1.2 TECHNICAL SPECIFICATIONS
1.2.1 MODELS
1.2.2 PHYSICAL ATTRIBUTES
1.2.3 PERFORMANCE
SECTION 2 INSTALLATION CONSIDERATIONS
2.1 COOLING
2.2 EQUIPMENT LOCATION
2.3 ROUTING OF CABLES
2.4 LIMITATIONS
SECTION 3 INSTALLATION PROCEDURE
3.1 GENERAL INFORMATION
3.2 UNPACKING AND INSPECTING
3.3 CABLE HARNESS
3.3.1 LIGHTING CONTROLS
3.3.2 SIGNALS AND POWER
3.3.3 HARNESS VERIFICATION
3.4 MOUNTING
SECTION 4 OPERATION
4.1 FRONT PANEL CONTROLS AND ANNUNCIATIONS
4.1.1 CONTROLS
4.1.2 ANNUCIATIONS
SECTION 5 CONFORMANCE
5.1 OPERATING INSTRUCTIONS
5.2 CONTINUED AIRWORTHINESS STATEMENT
5.3 ENVIRONMENTAL QUALIFICATION STATEMENT
NUMBER LIST OF TABLES AND FIGURES
1.1 MODELS TABLE
1.2 PHYSICAL ATTRIBUTES TABLE
1.3 PERFORMANCE TABLE
3.3 CONNECTOR PINOUT FIGURE
3.3 SCHEMATIC PIONOUT TABLE
3.4 OUTLINE DRAWING
3.5 WIRING DIAGRAM
4.1 FRONT PANEL FIGURE
REV. A February 21, 2011 4 Manual Number 9017211
SECTION 1 GENERAL DESCRIPTION
1.1 INTRODUCTION
The MD41-151X series products are compact, self-contained Annunciation and Control Units (ACUs). The
fully integrated control unit provides annunciation and mode selection for Global Positioning System
(GPS) / Satellite-Based Augmentation System (SBAS) navigators. This series of the MD41 product family
is specifically designed to work with the Garmin GTN 6XX/7XX
derivatives with equivalent functionality. It combines the necessary functions and annunciations required
to interface with an approved system and provide regulatory compliance with GPS/SBAS minimum
performance specifications.
Highlighted features include long-life LEDs used for all lighting, internally backlit selection switches, deadfront inactive annunciations, and the installation option for manual or automatic dimming. An external
annunciation dimming adjustment is provided for balancing low-level light conditions.
1.2 TECHNICAL SPECIFICATIONS
1.2.1 MODELS
Unit Configurations
MD41-1510 MD41-1512 MD41-1514
Orientation Horizontal Horizontal Horizontal
Power Input 28VDC 14VDC 28VDC
Lighting Input 28VDC 14VDC 5VDC
MD41-1511 MD41-1513 MD41-1515
Orientation Vertical Vertical Vertical
Power Input 28VDC 14VDC 28VDC
Lighting Input 28VDC 14VDC 5VDC
1.2.2 PHYSICAL ATTRIBUTES
Characteristics:
Weight: 0.26 pounds
Dimensions:
(not including connector or mate)
Mating Connector: Positronic RD25F10JVL0 or equivalent (MCI P/N 7014517)
Instrument Panel Mounting: Rear mount
1.2.3 PERFORMANCE
Specifications:
Qualification: FAA TSO-C129
Environmental Qualification: RTCA DO-160D Environmental Category
Power Requirement: 0.20 A max
series WAAS navigator systems and
Table 1.1
3.2 inches long
3.25 inches wide
0.8 inches high
Table 1.2
F2CAB(SM/UG)XXXXXXZBABA(TT)M[A3C3]XXA*
* Sections 16, 20, 21, and 22 comply with DO-160C, Section 8
(UG) complies with DO-160F
REV. A February 21, 2011 5 Manual Number 9017211
Loading...