Midco J121-DS User Manual

Incinomite

Spark Ignited Gas Burners

Incinomite Burner

Incinomite

Spark Ignited Gas Burners

Midco®Incinomite - the incinerator industry's #1 choice!

Long flame - automatic self cooling system - spark ignited

To design a package power gas burner for industrial and commercial
incineration requires knowledge—knowledge gained by experience,
over 40 years worth. The Midco Incinomite models with their rugged
and foolproof designs, have become the incinerator industry standard.

Model J83-DS features direct spark ignition. The self contained
electronic system produces instantaneous spark ignition. Continuous
monitoring by the solid state system verifies flame or the burner
automatically locks out. The ignition trial period is a positive and
meaningful safety feature. With the direct spark model, we have
eliminated forever the problem of pilot outage.

Where codes or insurance specifications require spark ignition
piloted burners, the J81A-3 and J121A-3 are the burners of choice.
The J81A-3 and J121A-3 Incinomites feature a spark ignited
intermittent proven ignitor (pilot) with 100% safety shut-off and
up to 1200 MBH input capacity.

Among other outstanding Incinomite standard features is the long
luminous flame, the quiet permanently lubricated motor-driven
high output blower, and the automatic self-cooling system that
inhibits burner damage from heat back-up. For flexible installation,
the standard mounting flange is easily changed for either horizontal
or 10˚ down firing. The louvres in the blower housing permit
adjustment of air volume to provide desired flame characteristics
for varying conditions. Incinomite’s exclusive design features all
flame safeguard components and associated wiring outside the
blast tube and blower housing, away from heat, for a longer life and
reduced maintenance costs. The blast tube contains only electrodes
that provide ignition and flame detection—there is nothing to
clog...no wires to burn. Each Incinomite burner is shipped fully
assembled and every unit is fire-tested before leaving the plant.
Compact design makes the Incinomite easier to install and service.

Featuring standard design, the Incinomite burners are also available
with custom options to suit your specific applications. The on-off
switch is shipped as standard. Burners are shipped as natural gas
models, with kits available for field conversion to propane gas. And
for special applications such as insurance specification or local
codes, Midco will tailor the Incinomite to fit those requirements.

Common
80 Series
120 Series

* Add 1-1/2" for optional

10° downfire mounting

** Add 1/2" for optional

10° downfire mounting
All dimensions shown
are in inches