Midas Venice User Manual
MONO P.C.B. (2channels shown)
Internal Modifications
3
The console is designed to satisfy almost all
applications. The internal modifications are offered to
provide alternative routings for very special
applications. All modifications can be carried out from
the bottom side of the P.C.B..
4
Warning: The modifications involve cutting of traces
and resoldering of specially designed pads and should
only carried out by competent electronic technician.
MIDAS accepts no responsibility for any damages or
injuries. In case of damages by modifications, MIDAS
may declare warranty privileges void.
To open the unit, the following steps are necessary:
1. Remove all cords including the mains cord.
2. Remove the sidewings and the armrest.
3. Remove the screws that attach the top panel.
4. Open the top panel carefully. Now you have acces
5
to the bottom side of the P.C.B..
STEREO P.C.B. (2channels shown)
1
2
Mon and aux sends post-eq :
1
1. Cut here.
2. Solder here.
2
6
Fx sends pre-eq:
3. Cut here.
1
4. Solder here.
Direct outs pre-fader:
2
5. Cut here.
6. Solder here.
CUT
4
SOLDER
3
Loading...