MicW Audio H825 User Manual

www.micwaudio.com

Headworn microphones

User’s Manual

INTRODUCTION

We have been producing high quality
microphones for test, measurement
and studio recording for over 10 years.
Our unique knowledge of diaphragm
technology has enabled us to oer you a
range of extremely high quality products
for a variety of audio applications.

The H-Series is MicW’s new professional
headworn range. With its micro-miniature

OPERATIONAL SAFETY

H-Series microphones use pre-polarized
capsules that are tested both at high
temperatures and in very humid
conditions for over 24 hours prior to
factory release. The microphones are
very resistant to temperature and
humidity. They can be safely operated
in temperatures ranging from -17℃ to
+60℃ and in up to 95% humidity.

DIRECTIONAL CHARACTERISTICS

The H825 is an omnidirectional
microphone.

FREQUENCY RESPONSE

Typical frequency responses are shown in
the following charts

.

MICROPHONE INSTALLATION

✽

Mic placement

POWER SUPPLY

The H-Series has been designed with
a Microdot connector. MicW also
provides several breakout adaptors
(see Microphone Installation) for a wide
range of wireless systems or XLR input
applications.

APPLICATIONS

The omnidirectional H825 is designed for
applications such as broadcast narration,
live & stage performances, other high
quality speech requirements that require
a head-worn microphone with superior
noise rejection and a smooth, natural­sounding frequency response.

With optional adapters, the microphone
can be used with virtually any
manufacturer's wireless beltpack system.

capsule and well designed single-ear
mount, it delivers a great intengibility,
regardless of the position of the capsule
relative to the sound source.

• On Air Presentation • Stage and Theater • TV show

H825 Polar Pattern

Typical Frequency Response of H825 at 5cm

from the source

1kHz

0

345

195 165

330

210

315

225

300

240

285

255

270 90

75

105

60

120

45

135

30

150

15

180

10db

20

10

0

-10

-20

-30
20 200 2000 20000

H825

5 Windscreen ­Yellow (WS018)

H825 Microphone
with Microdot
Connector

10 Sticky Tape

(TP011)

User Manual

✽

Connector installation

• LC131AK Microdot to TA3F for connection to
an AKG transmitter.

• LC241SH Microdot to 3-PIN XLR for connection

to a SHURE transmitter.

• LC341AT Microdot to 4pin Hirose for
connection to an Audio-Technica transmitter.

• LC031SE Microdot to mini jack with thread for
connection to a Sennheiser transmitter.

• LC032SE Microdot to Lemo, for connection to

a Sennheiser transmitter.

• LC441MW Microdot to mobile device for
connection to iPhone, iPad and other smart
devices.

WARRANTY POLICY

MicW Audio warrants that its products
will be free from defects in material and
workmanship for two (2) years from
the date of purchase by the Original
Purchaser.

OPTIONAL ACCESSORIES

SPECIFICATIONS WHAT'S IN THE KIT

The H825 Kit contains
the following items:

CE MARKING

MicW H825 microphones
conform to the relevant
CE mark directives
approved by the
European commission

MicW microphones

Product features and specications are subject to change without notice

a member of BSWA Technology Ltd.

Unit 1003, North Ring Center No.18 Yumin Road,

Xicheng District, Beijing 100029, China

Phone: [phone]

Fax: [phone]

Email: [e-mail]

Web: www.micwaudio.com

LC341AT

Microdot to 4-pin Hirose
(Audio-Technica)

LC031SE

Microdot to mini jack with
thread (Sennheiser)

LC241SH

Microdot to TA4F
Switchcraft (Shure)

LC131AK

Microdot to TA3F
Switchcraft (AKG)

PI50

Microdot to XLR adaptor
– provides 48V phantom
power

LC441MW

Microdot to iPhone or
other mobile device

LC032SE

Microdot to 3-pin Lemo
(Sennheiser)

Type
Capsule diameter
Principe of operation
Polar Pattern
Sensitivity(±3dB)
Frequency Response
Max. SPL(<0.1% THD)
Equ. noise level
Power
Operating Temperature
Cable Length
Connector

Condenser

4.0mm
Pressure
Omni

5.6mV/Pa
20Hz~20kHz
126dB
31dB(A)

0.8-5V DC

-17℃~+60

℃

1.6m
Microdot*

Microphone H825

1 Croc Clip

(CL028)

www.micwaudio.com

Headworn microphones

User’s Manual

H825

• 1 Connector to choose

- Microdot to Sennheiser Minijack
(LC031SE) or

- Microdot to AKG (LC131AK) or

- Microdot to Shure (LC241SH) or

- Microdot to S ennh 3-pin Lemo (LC032SE) or

- Microdot to iPhone 3.5mm Jack (LC441MW)