MICUNA ALEXA Assembly Instructions Manual

Manufactured by:

MICUNA S.L.
Prolongación Albufera,
S/N 46430 Sollana
(Valencia) SPAIN

Assembly of this product is best undertaken by two people

Retain for future reference

Read carefully before assembly and use of this product

Please remove all packaging materials before use.

Assembly Instructions

A L E X A

I M P O R T A N T

D

E

B

C

FI

A

B

D

Imported by:

Cute Co Pty Ltd
11A /16 Aquatic Drive,
Frenchs Forest
NSW 2086, AUSTRALIA
Ph: [phone]
www.cuteco.com.au

Failure to follow these warnings and the
assembly instructions could result in serious
injury or death.

Read all the instructions before assembling the
cot. Retain these instructions for future use.

Never use plastic shipping bags or other plastic
lm as mattress covers as these may cause
suocation.

Infants can suocate in gaps between the cot
side if the matters is smaller than the
recommended size.

Infants may suocate on soft bedding. Never
add a pillow or comforter. Never place
additional paddings under an infant.

Strings may cause strangulation! DO NOT place
items with strings around a child’s neck such as
hood strings or pacier cords.

DO NOT suspend any strings over the cot or
attach strings to toys. To help prevent
strangulation tighten all fasteners. A child can
trap parts of the body or clothing on loose
fasteners.

DO NOT place the cot near a window where
cords from blinds or drapes may strangle a
child.

DO NOT hang anything nearby where there is a
potential danger of the item falling into the
cot.

DO NOT place the cot too close to heaters or
power points.

KEEP ANY MEDICATION, SMALL TOYS OR
SMALL ITEMS SUCH AS MONEY OUT OF
REACH FROM ANY POSITION IN THE COT.

DO NOT USE THE COT IF ANY PARTS ARE
MISSING, DAMAGED OR BROKEN.

Contact Cute Co Pty Ltd for replacement parts
and instructional literature if needed. DO NOT
substitute parts.

Check the cot for damaged hardware, loose
joints, bolts or fasteners as well as missing
parts or sharp edges before and after assembly
and frequently during use.

To ensure safety, regularly check all connecting
bolts and fasteners making sure they are tight.

TO PREVENT FALLS, THE MATTRESS BASE OF
THIS COT SHOULD BE ADJUSTED TO THE
LOWEST POSITION BEFORE THE CHILD CAN
SIT UP.

W A R N I N G

1

This cot has been manufactured for use with a
mattress which measures 570mm wide by
1170mm long and 100mm in thickness. The
width and length are specied because it is
important that the gaps between the mattress
and the sides and ends of the cot will not
exceed 40mm when the mattress is pushed to
one side or end, and 20mm when the mattress
is centred in the cot. The thickness of the
mattress has been specied to ensure that the
depth of the cot is greater than 500mm with
the mattress base in the lower position to
minimize the risk of a child climbing or falling
out of the cot.

If renishing, use a non toxic nish specied for
children’s products.

Use a non toxic, non abrasive cleaner. Mix a
solution of water with a small amount of a mild
detergent. Apply to cot surface with a damp
cloth.

It is important that the humidity levels in the
room are controlled from extremes of high or
low humidity. The cot should not be placed
directly next to air conditioning outlets,
replaces, radiators, space heaters, humidiers
or dehumidiers. Exposure to extreme
variations of temperature and humidity can
damage wood products such as this one.

Keep the cot out of direct sunlight. UV rays may
fade colors and in some cases darken naturally
over time and exposure to direct sunlight will
hasten this natural process along with some
wood darkening; this is not considered to be a
quality defect.

If you need to put your cot in storage for any
period of time do not store it in a damp or hot
environment. Allow air ow around furniture
and do not stack anything onto it.

RECOMMENDED MATTRESS SIZE

CARE AND MAINTENANCE

Once you receive your micuna product, if you
need any assistance, spare parts or have any
feedback regarding our goods, please contact
Cute Co by email at [e-mail]. You
can also visit our website at
www.cuteco.com.au for latest product
information.

AFTER SALES SERVICE

Our products come with guarantees that
cannot be excluded under the Australian
Consumer Law. You are entitled to a
replacement or refund for a major failure and
for compensation for any other reasonably
foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced
if the products fail to be of acceptable quality
and the failure does not amount to a major
failure. The guarantee described below is in
addition to the guarantee provided by law.

The manufacturer will replace any missing
parts or defective item within 2 years from the
date of purchase subject to the conditions
below.

This guarantee does not cover any damaged or
defective parts that result from installation and
assembly, normal wear and tear, abuse,
negligence, improper use, maintenance,
storage or alteration to the nishing, design or
hardware of the cot.

This guarantee only covers new units with
original packaging and ownership and it is not
transferable. It is limited to the original
purchaser specied in the original sales order
at the original delivery address.

It does not cover any used, secondhand or
demo models.

For claims please email us at
[e-mail] or visit the store where the
product was purchased. Please keep your
receipt so we can process your guarantee
request.

2 YEAR LIMITED GUARANTEE

2