Microvision HS2141 Users Manual

Microvision, Inc.
19910 North Creek Parkway P.O. Box 3008 Bothell, Washington 98011
October 3, 2003
Instruction manual for OEM Integration, including FCC ID labeling
Name: Bluetooth Module HS2141-A FCC-ID: Q4YHS2141
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This is intended to instruct the OEM integrator on you to specify the FCC ID of the Bluetooth module HS2141-A on the end product.
Based on the Public Notice from FCC, a label on the must be placed on the end product which indicates that it contains the Bluetooth module.
The label must use wording such as " similar wording that expresses the same meaning may be used.
Contains FCC ID: Q4YHS2141
Contains FCC ID: Q4YHS2141" or similar. Any
Loading...