Microtune MT0760UD2P, MT0760UD1P User Manual

Microtune, Inc.

Bluetooth USB Dongle

User Manual

MT0760-UD1P •••• MT0760-UD2P

MT0760-UDW1P •••• MT0760-UDW2P

Host Requirements

The Microtune OneChip Solution for W indows software supports the following operating systems:

•= Windows 98SE

•= Windows ME

•= Windows 2000

•= Windows XP

If using other host-based software, please consult the related documentation.

Package Contents

The Microtune MT0760-UDW1P USB Dongle Bundle should contain the following items:

•= MT0760-UD1P USB Dongle

•= MT-OSW CD

The Microtune MT0760-UDW2P USB Dongle Bundle should contain the following items:

•= MT0760-UD2P USB Dongle

•= MT-OSW CD

Instructions

Installation

Plug the USB dongle in prior to installing the Bluetooth host software.

•= For MT0760-UDW1P or MT0760-UDW2P, install software from included MT-OSW CD

Usage

Plug MT0760-UD1P or MT0760-UD2P USB Dongle into an available USB port on the computer

When connected, the green LED will light

Windows will recognize new hardware

Run host-based Bluetooth software to enable use with a Bluetooth device

Technical Support

If you experience problems, please contact:

Microtune, Inc.

Wireless Connectivity Business Unit

6440 Lusk Blvd. Suite D-205

San Diego, CA 92121 USA

Phone: [phone]

Fax: [phone]

Microtune Bluetooth USB Dongle User Manual

W

s

d

e

MT0760-UD1P •••• MT0760-UD2P

MT0760-UDW1P •••• MT0760-UDW2P

Regulatory Information

This product complies with the regulations of the following organizations:

•= FCC

•= European Union (EU) and EFTA

•= Bluetooth SIG

This equipment is Bluetooth 1.1 qualified according to specification.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Statement according FCC part 15.21
Modifications not expressly approved by Microtune, Inc. could void the user's authority to operate the equipment.

Statement according FCC part 15.105
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Exposure to Radio Frequency Radiation
The radiated output power of this internal wireless radio is far below the FCC radio frequency exposure limits. Nevertheless, the wireless radio shall be used in such a manner that the radio is 20 cm or further from the
human body.
The internal wireless radio operates within guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Microtune, Inc. therefore believes the
internal wireless radio is safe for use by consumers. The level of energy emitted is far less than the electromagnetic energy emitted by wireless devices such as mobile phones. However, the use of wireless radios may
be restricted in some situations or environments, such as aboard airplanes. If you are unsure of restrictions, you are encouraged to ask for authorization before turning on the wireless radio.

MT0760-UD Hardware Specifications

BLUETOOTH WIRELESS CONNECTION SPECIFICATION

Radio class Class 2 (1.5 dBm) Class 1 (20 dBm)

Range, 0.1% BER (> 500kbps) > 10m (30 ft) > 60m (200 ft)

Power consumption (DM5) 50 mA 120 mA

Frequency range 2.400 to 2.4835 GHz

Data throughput 1 Mbps (723 kBps effective rate)

ACL data

Power management Sniff, park, and hold

Encryption 128 bit

Antenna Horizontal plane (1.7 dBi)

USB CONNECTION SPECIFICATIONS

USB type USB version 1.1 slave
USB data input 12 Mbps

USB power input 5V required from host
USB connector type Standard USB male type A

DONGLE GENERAL SPECIFICATIONS

Dongle temperature range -20° to +50° C

Dongle firmware LM, LC, HCI
Certification and regulatory USB1.1, BT1.1, FCC, CE

MT0760-UD2 MT0760-UD1

DM1/DH1, DM3/DH3, DM5/DH5, AUX1

MT-OSW Software Specifications

BLUETOOTH HOST SOFTWARE

Host stacks HCI, L2CAP, RFCOMM, SDP,

Application profiles GAP, SDAP

Operating system
support

OBEX

SPP client and server
DUN client and server
LAN client and server
FAX client
GEOP, OPP, FTP, SYNC
HSP

Windows 98
Windows 2000
Windows ME
Windows XP

World Headquarters • Microtune, Inc., 2201 Tenth Street, Plano, TX 75074 USA • Tel: [phone], Fax: [phone], E-mail: [e-mail],

eb site: www.microtune.com

Wireless Headquarters • Microtune, Inc. Wireless Connectivity Business Unit, 6440 Lusk Blvd. Suite D-205, San Diego, CA 92121 USA • Tel: 858-558-

6088, Fax: [phone]

Europe • Microtune GmbH and Co. KG, Marie Curie Strasse 1, 85055 Ingolstadt / Germany • Tel: [phone], Fax: [phone]

Japan • Microtune (Japan) Ltd., Kawasho Building 4F, 3-10 Nihonbashi Kodemmacho, Chuo-ku, Tokyo 103-0001• Tel: [phone], Fax: [phone]

Taiwan • Microtune (Taiwan) Ltd., 18F-7, No.77, Sec.1, Hsin Tai Wu Rd., Hsi-Chih, Taipei Hsien, Taiwan, R.O.C. • Tel: [phone], Fax: +886-2-

2698-8647

For a detailed list of current sales representatives, visit our Web site at www.microtune.com.

The information in this document is believed to be accurate and reliable. Microtune assumes no responsibility for any consequences arising from the use of this information, nor from any infringement of patents or the rights of third parties which may result from its use. No li cense i
grant ed by implication or otherwise un der any patent or oth er rights of Mic rotune. The in formation in thi s publication replaces and super sedes all information previous ly supplied, and is subject t o change without notice. The cus tomer is responsible for assur ing that proper design an
operating safeguards are observed to minimize inherent and procedural hazards. Microtune assumes no responsibility for applications assistance or customer product design.

The devices described in this document are not authorized for use in medical, life-support equipment, or any other application involving a p otential risk of se vere property or environmental d amage, persona l injury, or death without prior ex press written ap proval of Microtun e. Any such us
is understood to be entirely at the user’s risk.

Microtun e, MicroTuner, Mi croModule, and the M icrotune logo are tr ademarks of Microtun e, Inc. All other trademarks belon g to their respective companies.

Microtune’s products are protected by one or more of the following U.S. patents: 5,625,325; 5,648,744; 5,717,730; 5,737,035; 5,739,730; 5,805,988; 5,847,612; 6, 100,761; 6,104,242; 6,144,402; 6,163,684; 6,169,569; 6,177,964; 6,218,899 and additional patents pending or filed.

Entire contents Copyright © 2001 Microtune, Inc.

Products not to be used in life support or safety applications.