Microtek GNC I SM6000 0205 User Manual

Unpack Contents

Install Software

Unlock Scanner

Installing your Microtek ScanMaker 6000

Connect Scanner

Scanning Basics

1. Place the scan material

A. To scan photos, place the photo to be

scanned on the scanner bed. The top end of the original should be positioned towards the front of the scanner, with the surface to be scanned facing down.

Unlocked Locked

A. Remove the yellow “Step 3” sticker from your scanner. B. With the scanner power off, turn the scanner on its side to see the

locking screw at the bottom.

NOTE: For the automatic cropping feature to work correctly during the preview scan of your photo, make sure the scanner lid is completely flat and closed over the scan bed.

3. Select preferences

C. Using a coin, turn the locking screw clockwise until the arrow mark

points to the position as indicated in the graphic above, with the icon on the lock showing as “unlocked”.

Microtek International, Inc. I49-003906 A

ScanMaker 6000 scanner

Software CD

Power adapter

NOTE: To lock the scanner (for shipping and other reasons), turn the locking screw

counterclockwise until the arrow mark points to the “Locked” position. Do not turn the scanner upside down and attempt to lock the scanner this way.

B. To scan film, use the LightLid 35. See

“Using the LightLid 35” (back section) for more details.

Use the following buttons to change the settings according to your preferences.

Original – Defines the category of the media (scan material). Scan Type – Selects the output image type (color, gray, or B&W). Purpose – Sets the image resolution to match your target application.

NOTE: Click the Scale Output, Adjust, and Reset buttons if you need to make

further adjustments.

For details on how to use the Advanced Control Panel, refer to the ScanMaker 6000 Supplement PDF document in the Microtek CD-ROM.

LightLid 35

Important: Do not remove

the yellow stickers from your scanner until you are told to do so. You must install software before connecting your scanner.

Always close any open programs and turn off Anti-virus utilities before installing software.

Hi-Speed USB cable

To the power adapter

A. Remove the yellow “Step 4” sticker from your scanner. B. Connect the power adapter to the back of the scanner. C. Plug the power adapter into a power source.

Windows XPMac OS X

4. Scan your material

A. Click the Scan to button from the ScanWizard 5 Control Panel.

2. Launch ScanWizard 5

To launch ScanWizard 5 as a stand-alone program, double-click the ScanWizard 5 icon on your desktop. The Standard Control Panel will appear, and the scanner will automatically perform a “fast preview” of your image, based on settings specified under the Original, Scan Type, and Purpose categories (buttons).

B. When the Save As dialog box appears, specify the folder location, a file

name, and the format for the output image, then click Save. The image is scanned and saved to the specified location.

Send image to application after saving:

If this option is checked, the scanned image is saved first, then automatically delivered to an image-editing software, an e-mail editor, or a web browser as indicated in the destination box.

PC:

A. Place the Microtek CD-ROM into the CD-ROM drive. B. Follow the on-screen instructions to install the driver and software.

NOTE: If the Microtek Software Installer screen does not come up automatically,

double-click the following in succession: “My Computer”; the CD-ROM icon; then cdsetup.exe to start the installer program.

MAC:

A. Place the Microtek CD-ROM into the CD-ROM drive. Install the Adobe

software first, and then install the rest of the software components.

B. Restart your computer.

NOTE: After rebooting your Macintosh, the Microtek software will attempt to

locate your scanner on the system. Since this is your first install and you have not yet connected the scanner, simply ignore the message that appears and proceed to the next step.

To the Hi-Speed USB cable

D. Connect one end of the cable to your computer. E. Connect the other end of the cable to the scanner. F. Press the power button at the front panel of

your scanner, and wait for the light to stop blinking and stay on steady.

The system will detect your scanner automatically.

Power button

Scanner Buttons

The ScanMaker 6000 is equipped with seven scanner buttons, providing quick access to the most frequently used functions. These buttons are Cancel/Setup, Scan, Copy,

E-mail, OCR, Scan-to-Web, and Custom.

• Cancel/Setup: Cancels the scanning job when the scanner is scanning. Launches the

Microtek Scanner Configuration (MSC) utility when the scanner is not scanning.

• Scan: Captures images that can be saved as files or sent to an image-editing application.

• Copy: Scans the image and sends it to your printer.

• E-mail: Scans the image and delivers it directly to your e-mail editor.

• OCR: Scans a text document, converts, and saves it in text file format. Files may be

immediately edited if configured in the MSC utility.

• Scan-to-Web: Scans an image and sends the output to a website. Your default browser will

open and display the captured image.

• Custom: Customizes this button to perform your preferred function, such as Power Saving,

Scan, Fax, or Launch Application.

Cancel/

Setup

Scan

Copy OCR Scan-to-

E-mail

Web

Custom

NOTE: If your computer has both Hi-Speed USB (USB 2.0) and USB 1.1 ports, connect the cable to the Hi-Speed USB port. Use the USB 1.1 port only if your computer does not have Hi-Speed USB.

TURN OVER TO CONTINUE

Using the LightLid 35

Using ColoRescue

Do You Need Assistance?

Connecting the LightLid 35

1. Remove the scanner lid.

2. Ensure that the scanner is

powered off; then plug the connector of the LightLid into the scanner’s 15-pin accessory port.

Using the LightLid 35

A. To load 35mm filmstrips:

1. Turn the LightLid 35 over. Load the filmstrip into the recessed area of

the LightLid 35, making sure that one side of the filmstrip is tucked under the mylar sheets, with the film’s shiny base facing up.

Mylar sheets

Restoring Color in Photos

ColoRescue™ is an automatic color recovery system that restores faded color in both photos and film to their original luster.

To use ColoRescue:

1. Raise the scanner lid, and place the photo to be scanned on the scanner

bed.

2. Launch ScanWizard 5. When the Standard Control Panel appears, click

the Switch icon on the upper right corner to switch to the Advanced Control Panel.

Click Switch icon

3. In the ScanWizard Settings window, check the “Automatic Color

Restoration” check box. The next time you scan faded photos or film, ColoRescue will restore the faded colors to their original brilliance.

Manuals

If you have additional questions and need further instruction or information, we provide PDF manuals for:

1. Using your ScanMaker 6000 (Supplementary information)

2. Using the ScanWizard 5 scanning software

3. Using the bundled third-party software

To access the PDF manuals: Insert the scanner’s software CD-ROM into your computer’s CD-ROM drive. Next, locate and click the Manuals option when the software installer window appears on your screen. Finally, select and click the title of the manual you wish to view.

Missing Items

If your package is missing items, please call the number below.

Customer Service Department 310-687-5940

Visit www.support.microtek.com/bronze/ for Customer Service hours.

Free 24/7 Online Technical Assistance

Go to the Microtek support site at www.support.microtek.com for:

• KnowledgeBase - Type in a question or browse through articles

for faqs, troubleshooting tips, how-to guides and more. The Microtek KnowledgeBase gives you answers at your fingertips, 24 hours a day.

2. Place the LightLid 35 with the loaded film on the scan bed, as

indicated in the graphic below.

Horizontal

B. To load 35mm slides:

1. Turn the LightLid 35 over. Load the slide into the recessed area at the

center of the LightLid 35, with the slide facing up.

2. Place the LightLid 35 with the loaded film on the scan bed, as

indicated in the graphic below.

Horizontal

For more details on the use of the LightLid 35 as well as information on how to scan film, refer to the ScanMaker 6000 Supplement PDF document in the Microtek CD-ROM.

Vertical

Grip prong for securing slide

Vertical

Problems?

The LED on the button panel indicates the status of the scanner.

Ready to scan.

Flashing

Warming up or scanning.

Off

May indicate a possible hardware problem. Call Microtek Technical Support.

First, make sure that you have followed installation steps 1 through 4. If your problem is listed here, try the suggested solution.

1. No light comes on when the scanner is turned on.

Make sure your scanner is connected to your computer and plugged into a power source.

2. Add/Remove Hardware Wizard appears on your screen.

Click the “Cancel” button and close the Control Panel. Disconnect the USB cable from the back of your computer, and refer to the installation instructions in this guide or the ScanMaker 6000 Supplement PDF document in the Microtek CD-ROM.

LED

Select Automatic

Color Restoration

3. When trying to scan, an error message appears on your screen that reads, “Can’t Find Scanners”.

Make sure your scanner is unlocked (see Step 3). Make sure your scanner is connected to your computer and plugged in to a

power source (see Step 4). Uninstall and reinstall the ScanWizard 5 software.

4. After clicking “Scan,” a blank screen appears.

Make sure your scanner is unlocked (see Step 3). Uninstall and reinstall the ScanWizard 5 software.

5. Having trouble scanning negatives or slides?

Make sure the LightLid 35 is properly installed, with its connector securely connected to the scanner’s 15-pin accessory port.

From the ScanWizard 5 Standard Control Panel, go to the Original button category, then proceed to the Film subcategory and make sure you select either the Positive or Negative option.

Uninstall and reinstall the ScanWizard 5 software.

• Downloads - Access manuals or the latest drivers and updates

for your product.

Personal Email Assistance

Also free of charge, Microtek’s technical support team will answer your personal email questions within 2 business days after you’ve filled out the easy online form at www.support.microtek.com/emailsupport/

Personal Telephone Assistance

Microtek basic installation telephone support is available free of charge for 90 days from your purchase. Toll or long-distance charges may apply.

Personal Telephone Assistance 310-687-5911 PC

310-687-5912 Mac

Visit www.support.microtek.com/bronze/ for Telephone Assistance hours.

Before you call, please install your scanner and software by following the included instructions, and have the information below ready:

1) Date of purchase

2) Product serial number (on the bottom)

3) Model name & number (ScanMaker 6000)

4) Version of operating system installed on your computer (Windows 98SE, 2000, XP, Mac OS 9.2, 10.x etc.)

5) Type of hardware: • Brand of computer • CPU type (Pentium III, 4, iMac, Power Mac, G4, G5, etc.)

6) Exact wording of any error message that may have appeared on the screen

7) What happened and what you were doing when the problem occurred

Note: Advanced troubleshooting is available for a consulting fee. For a detailed

listing of your Technical Support options, go to: www.support.microtek.com/bronze/

Third-Party Software Assistance

For technical support or any questions you have on third-party software which may be included with your package, please use the manufacturer websites listed below.

Manufacturer Website

ABBYY® Software House www.abbyyusa.com Adobe® Systems, Inc. www.adobe.com ScanSoft Simple Star, Inc. www.simplestar.com Ulead® www.ulead.com

Use only power supplies (AC/DC adapters) listed below:

Voltage Manufacturer Model No. 100V to 120V 1. DVE DSA-0151A-12

200V to 240V 1. DVE DSA-0151A-12

Note: Please make sure that the electrical outlet to where the scanner will be connected is nearby and readily accessible.

Copyright © 2005 Microtek Lab, Inc. The following are trademarks or registered trademarks of their respective companies: Microtek, ScanMaker, ScanWizard of Microtek Lab, Inc. All other trademarks or registered trademarks are the property of their respective holders. Specifications, software and hardware bundles are subject to change without notice. Not responsible for typographical errors. 020105

2. GAREAR GAD-SLU-121A3

3. HARD HDAD15W101-123

2. GAREAR GAD-SHE-121A3

3. HARD HDAD15W101-124

www.scansoft.com

Energy Star Notice

As an ENERGY STAR Partner, Microtek International, Inc. has determined that this scanner meets the ENERGY STAR guidelines for energy efficiency.

www.microtekusa.com