Microtec SA-15, SA-24, SA-20 User Manual
Swing Away Heat Press Machine Manual
Model NO.: SA-15/20/24
CONTENTS
I. Assembly Drawing -----------------------------------------------------------------------------------2
II. Technical Parameters ------------------------------------------------------------------------------2
III. Operation Process -------------------------------------------------------------------------------3-4
IV. Maintenance ------------------------------------------------------------------------------------------5
V. Trouble Shooting For Transfer Print Quality------------------------------------------------5
VI. Circuit Diagram -------------------------------------------------------------------------------------6
VII. Explosion View ----------------------------------------------------------------------------------7-8
-1-
I. Assembly Drawing
4. P4
1
ƻ
Power Switch
5
ƻ
Swing Handle
2
ƻ
Temperature Controller
6
ƻ
Fuse
3
ƻ
Power Cord
7
ƻ
Pressure Adjuster
II. Technical Parameters
1. Model No.: SA-15/20/24
2. Machine Dimension: 630*325*390mm/ 630*325*520mm/630*325*620mm
3. Heat Platen Size: 15 x 20’’,16''x20'',20”x24”(38 x 38,40x50,40x60cm)
4. Printable Articles Max Size: 380*380*10mm
5. Voltage: 220V/1Phase; 110V/1Phase
6. Power: 220V/1.8KW; 110V/1.2KW
7. Recommend Setting: 30~280s; 180~200°C
Time Range: 0~480s
Maximum Temp: 225 C°
8. Packing Size: 73*48*48cm/ 75*60*50cm/ 74*69*49cm
9. Gross Weight: 40.95kg/ 50.3kg/ 52.55kg
4
ƻ
Time Controller
-2-
III. Operation Process
p
e
crease Ti
me
1. Set temperature required
Time Temp
Reduce Tem
Increase Temp
The meter on the left side is timer,
and the one on the right hand is the
temperature controller.
2. Set time required
Reduce Time
Increase Time
Then set the time by pressing ‘’ˉ‘’
or “+” button.
Power on, the display shows
Centigrade.
When rising to the set temperature,
close down the heat platen. Then
the time controller starts to
countdown.
Then set the moderate temperatue
by pressing ‘’ˉ‘’ or “+” button.
Once the time is up, the buzzer will
send out sound. Then open and
swing away the heat platen.
-3-
Loading...