microSYST migan MPB AD, migan AD User Manual

migan MPB AD

Large Format Numeric LED Display with A-D Converter

User Manual

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach

 [phone],  [phone], [e-mail], www.microsyst.de

migan MPB AD

Large Format Numeric LED Display with A-D Converter

Table of Contents

1 GENERAL 3

2 SYSTEM OVERVIEW 3

3 TECHNICAL DATA 4

3.1 Device Configuration 5

3.2 Notes for the start-up 6

3.3 Device Configuration 6

4 CONNECTOR PIN ASSIGNMENTS 7

5 APPENDIX 8

5.1 Declaration of Conformity 8

5.2 Maintenance and Care 9

5.3 Warranty / Liability 10

5.4 Versions Overview 11

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
 [phone],  [phone], [e-mail], www.microsyst.de

Page 2

migan MPB AD

Large Format Numeric LED Display with A-D Converter

1 General

The large display numeric LED can be used universally for displaying pro­duction data, or as an information board.

The modular design allows for cost-effective models of various size, and with
different character heights and numbers of digits.

Thus integration into existing equipment or systems is easy and simple.

2 System Overview

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
 [phone],  [phone], [e-mail], www.microsyst.de

Page 3

migan MPB AD

migan for indoor use

migan for outdoor use

Display type

7 segment LED

7 segment single LED,
pixel size: 5.2 x 3.8 mm (oval)

Angle of radiation

n/a

110°/50° (horizontal/vertical)

Character height

60 / 100 / 150 / 200 / 250 mm

100 / 200 / 300 mm

Digits

1 to 100 digits

Lines

1 to 4

Channels

1 to maximum 4

Input range

-10 to 10 VDC, -20 to 20 mA

Input impedance

Voltage input: 1 MΩ, current input: 100 Ω

Display

0 to ±19999 or customer specific

Display range and
decimal point

adjustable via software
Display colour

standard: red; optional: green

Light intensity

n/a

red > 3100 cd/m², green > 3720 cd/m²

Brightness control

adjustable via software

automatically

Operating voltage

230 VAC / 50 Hz, 110 VAC / 60 Hz or 24 VDC ±20%

View

single sided to four sided

Interface

standard USB for configuration

Labelling

upon request

Housing

industrial version, powder coated aluminum

Housing colour

RAL 7016 (anthracite)

Mounting

articulated arm, angle bracket, hanging with chain or mounting frame

Protection

IP54 or IP65

IP65 for outdoor use

Operating temp.

0...+50 °C

standard: -20...+50 °C,
optional with heating: -25 to +50 °C

Storage temperature

-25...+70 °C

Large Format Numeric LED Display with A-D Converter

3 Technical Data

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
 [phone],  [phone], [e-mail], www.microsyst.de

Page 4

migan MPB AD

Large Format Numeric LED Display with A-D Converter

3.1 Device Configuration

Itemnumber :_________________________

Type:

for inside use for outside use

Character height:

60 mm 100 mm 150 mm 200 mm 250 mm 300 mm

Number of lines: ________ Number of digits per line: ________
Display colour:

red green yellow white blue

View:

single sided double sided ____ sided

Operating voltage:

230 V / 50 Hz 110 V / 60 Hz 24 V DC

Protection:

IP54 IP65 IP _____

Housing dimensions: _________x_________x_________mm

Housing Material:

Aluminum profile Stainless steel Sheet metal

Display range and dimension:

Line 1: _____________ - _____________ ________
Line 2: _____________ - _____________ ________
Line 3: _____________ - _____________ ________
Line 4: _____________ - _____________ ________

Input range:

Line 1: 4 to 20 mA 0 to 10 VDC _____________
Line 2: 4 to 20 mA 0 to 10 VDC _____________
Line 3: 4 to 20 mA 0 to 10 VDC _____________
Line 4: 4 to 20 mA 0 to 10 VDC _____________

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
 [phone],  [phone], [e-mail], www.microsyst.de

Page 5

migan MPB AD

Large Format Numeric LED Display with A-D Converter

3.2 Notes for the start-up

 When putting on the power supply, the following sequence has to be ob-

served:

o Connect the power supply cable to the display.
o Connect the power supply cable to the power supply.

 Directly after connecting the A-D inputs, the display shows the corresponding

values.

 When disconnecting the power supply, the following sequence has to be ob-

served:

o Disconnect the power supply cable from the power supply.
o Disconnect the power supply cable from the display.

3.3 Device Configuration

The device is already configured at the time of delivery. However, if you want
to do some changes, you can use the tool “MKS”.

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
 [phone],  [phone], [e-mail], www.microsyst.de

Page 6

migan MPB AD

Pin

Assignment

1

L1 2 N

(PE)

PE

Pin

Assignment

1

GND

2

+24 VDC

3

PE

Pin

Assignment

1

Channel 1 +

2

Channel 2 +

3

Channel 3 +

4

Channel 4 +

5 6

Channel 1 -

7

Channel 2 -

8

Channel 3 -

9

Channel 4 -

Large Format Numeric LED Display with A-D Converter

4 Connector Pin Assignments

A-D inputs (9-Pole Sub-D Plug Connector)

If using only one voltage input, channel 1 is used!
If using only one current input, channel 3 is used!

Power Connector 230 VAC

Power Connector 24 VDC (optional)

Page 7

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
 [phone],  [phone], [e-mail], www.microsyst.de

migan MPB AD

Das bezeichnete Produkt stimmt mit der
folgenden Europäischen Richtlinie überein:

We herewith confirm that the above mentioned
product meets the requirements of the following
standard:

Die Übereinstimmung des bezeichneten Produk­tes mit den Vorschriften der angewandten Richt­linie(n) wird nachgewiesen durch die Einhaltung
folgender Normen / Vorschriften:

The conformity of the product described above with
the provisions of the applied Directive(s) is demon­strated by compliance with the following standards /
regulations:

Richtlinien / Directives

Europäische Norm / Standard

EMV Richtlinie

EMC Directive

2014/30/EU

EN61000-6-2:2005

EN61000-6-4:2007 +A1:2011

Niederspannungs­Richtlinie

Low Voltage Directive

2014/35/EU

EN60950-1:2006 +A11:2009 +A1:2010 +A12:2011
+A2:2013

RoHS Richtlinie

RoHS Directive

2011/65/EU

EN50581:2012

Large Format Numeric LED Display with A-D Converter

5 Appendix

5.1 Declaration of Conformity

EU-Konformitätserklärung

EU Declaration of Conformity

Produktbezeichnung: migan

Product name:

Typenreihe: migan AD

Type code:

Hersteller: microSYST Systemelectronic GmbH

Manufacturer: Am Gewerbepark 11
92670 Windischeschenbach

Windischeschenbach, 16.11.2017

Manuel Raß

Geschäftsführer / General Manager

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
 [phone],  [phone], [e-mail], www.microsyst.de

Page 8

migan MPB AD

Large Format Numeric LED Display with A-D Converter

5.2 Maintenance and Care

Please observe the following instructions:

 Make sure that the housing can be opened for adjustment and mainte-

nance even after the display has been installed. Allow for adequate
clearance at the back, front and top of the display unit in order to follow
for sufficient ventilation (if vent slots are included).

 Display quality is impaired by direct illumination with bright light sources

and/or direct sunlight.

 The display must be switched off before cleaning.
 Protect the display from excessive humidity, extreme vibration, direct

sunlight and extreme temperatures. Non-observance may lead to mal­functioning or destruction of the device. Under certain circumstances
electrical shock, fire and explosion may occur as well. Information con­cerning allowable ambient conditions, including recommended tempera­ture ranges, can be found in the chapter entitled „Technical Data“.

 The display may not be placed into service if the device and/or the pow-

er cable are known to be damaged.

 Do not attempt to repair the device yourself. The guarantee is rendered

null and void if the device is tampered with by unauthorised persons.

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
 [phone],  [phone], [e-mail], www.microsyst.de

Page 9

migan MPB AD

Large Format Numeric LED Display with A-D Converter

5.3 Warranty / Liability

For the product, liability is assumed for defects, which existed at the delivery
date according to our General Terms and Conditions.

Technically changes as well as errors are excepted. A claim for delivery of a
new product does not exist. The buyer has to check the received product
immediately and indicate evident defects at the latest 24 hours after detec­tion. Non-observance of notification requirements is equated with ac­ceptance of the defect. Not immediately visible defects have to be indicated
immediately after their perception too.

Generally, defects and their symptoms must be described as accurately as
possible in order to allow for reproducibility and elimination. The buyer must
provide for access to the relevant device and all required and/or useful in­formation at no charge and must make all of the required data and machine
time available free of charge.

The guarantee does not cover defects, which result from non-observance of
the prescribed conditions of use, or from improper handling.

If the device has been placed at the disposal of the buyer for test purposes
and has been purchased subsequent to such testing, both parties agree that

the product is to be considered “used” and that it has been purchased “as

is”. No guarantee claims may be made in such cases.

The General Terms and Conditions of microSYST Systemelectronic GmbH
in current version apply as well.

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
 [phone],  [phone], [e-mail], www.microsyst.de

Page 10

migan MPB AD

Version

Date

Remark, Description

1.00

1.10

1.20

1.30

1.40

2.00

2.10

2013-05-13
2013-10-17

2014-02-06
2015-07-17
2016-04-27

16.11.16

13.11.17

Document created, based on X-M32-BXXX8X-001:
new display modules
Logo
migan 2 -> migan, input resistance
Chapter “Device Configuration” changed
Declaration of conformity

migan2  migan MPB
Change of address and title MPB

Large Format Numeric LED Display with A-D Converter

5.4 Versions Overview

Certified per DIN EN ISO 9001.

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
 [phone],  [phone], [e-mail], www.microsyst.de

Page 11