Micro Star Co CB54GMS6819 User Manual

Wireless 11g CardBus Card CB54G User’s Guide
>>> 1.3
Specifications
Form Factor CardBus
Operation voltage 3.3 V
Standard IEEE 802.11g/IEEE 802.11b
Frequency Range 2.4GHz to 2.4835GHz
Data Rate and IEEE 802.11b(Auto-Fallback): Modulation Types - CCK @ 5.5 and 11 Mbps
- DQPSK @ 2Mbps
- DBPSK @ 1 Mbps IEEE 802.11g(Auto-Fallback):
- OFDM @ 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Operating Channels - CCK: 14 channels
- OFDM: 13 channels
Media Access Protocol Direct Sequence Spread
Spectrum (DSSS) with ACK; Half-Duplex
Security / Encryption 64-/128-bit WEP
Range Up to 240m
Antenna Internal diversity with
chip antennas
Operating system Microsoft® Windows® 98SE/
ME/2000/XP
4
Wireless 11g CardBus Card CB54G User’s Guide
Environmental Operating Temperature:
0 ~ 55OC Operating Humidity: 0 ~ 95%, non-condensing
EMI Compliance FCC, CE, BSMI, DGT
Dimensions (WxDxH) 115 X 54 X 7mm
Weight 38.5g
5
Wireless 11g CardBus Card CB54G User’s Guide
>>> 1.4
System Requirements
Before installing the CB54G, your PC should meet the following:
Notebook PC with PC Card slot, or desktop PC with PC Card slot module.
Windows® 98SE/ME/2000/XP operating system.
Minimum 5M bytes free disk space for installing the driver and utilities.
CD-ROM drive, double speed or higher.
>>> 1.5 Package Contents
Unpack the package and check all the items carefully. If any item contained is damaged or missing, please contact your local dealer as soon as possible. Also, keep the box and packing materials in case you need to ship the unit in the future. The package should contain the following items:
One Wireless 11g CardBus Card.
One Quick Installation Guide.
One CD title including drivers, utilities, users manual and quick guide.
6
Product View>>> 1.6
Power LED - Solid BLUE, indicating that the CB54G is power on.
Link LED - BLUE, indicating the networking status by:
ON - CB54G is connected. Flash - CB54G is searching for
available Access Point or receiving/transmitting data over the wireless network.
Wireless 11g CardBus Card CB54G User’s Guide
Golden Finger
7
Wireless 11g CardBus Card CB54G User’s Guide
Hardware Installation
The following diagrams provide you a basic installation for the CB54G, including how to install and remove the CardBus adapter.
>>> 2.1
Connecting the CB54G
Locate the PC card slot on your notebook computer. If there is the dummy card in the slot, remove it first; then, insert the CB54G into the slot (usually with its label facing up) and push it until it is firmly seated.
PC card slot
DO NOT hold the CB54G on the
golden finger when installing it; otherwise, it may cause interference or damage.
Connect the CB54G
8
Wireless 11g CardBus Card CB54G User’s Guide
>>> 2.2
Eject Button
Removing the CB54G
Press the Eject Button to make it stretch out. Push the Eject Button and the CB54G will slide out slightly. Then, pull it out of the slot.
Before removing the CB54G, you should stop the device in Windows operating system.
Remove the CB54G
9
Loading...