All trademarks are the properties of their respective owners.
Release History
Version Revision Note Date
1.0 First Released 03, 2009
CHAPTER 2
Introductions
2-2
Introductions
Congratulations on becoming a user of this notebook, the finely designed notebook. This
brand-new exquisite notebook will give you a delightful and professional experience in using
notebook. We are proud to tell our users that this notebook is thoroughly tested and certified by
our reputation for unsurpassed dependability and customer satisfaction
.
Manual Map
This User’s Manual provides instructions and illustrations on how to operate this notebook. It is
recommended to read this manual carefully before using this notebook.
Chapter 1, Preface
this notebook. It is recommended to read these information or caution when using this notebook
for the first time.
Chapter 2, Introductions
recommended to check out that if you have all the accessories included when you open the packing
box. If any of these accessories is damaged or missing, please contact the vendor where you
purchased this notebook. Also, this chapter provides the specification of this notebook, and
introduces the function buttons, quick launch buttons, connectors, LEDs and externals of this
notebook.
Chapter 3, Getting Started
and hard disk drive. Beside, the steps of installing and uninstalling the battery; and the procedures
of connecting the various external devices, communication devices, and so on, are also provided to
help users getting familiar with this notebook.
, gives users the basic safety information and caution that is interrelated to using
, includes the descriptions of all the accessories of this notebook. It is
, gives the basic operation instructions on using keyboard, touchpad,
2-3
Introductions
Chapter 4, BIOS Setup, provides information on BIOS Setup program and allows you to configure
the system for optimum use.
Unpacking
First, unpack the shipping carton and check all items carefully. If any item contained is damaged or
missing, please contact your local dealer immediately. Also, keep the box and packing materials in
case you need to ship the unit in the future. The package should contain the following items:
These accessories listed
above may change without
notice.
Notebook
Quick Start Manual
High-capacity Li-ion battery AC adapter and power cord
Carry bag (optional)
All-in-one application disk, containing the full version of user’s manual,
drivers, utilities, and optional recovery function, etc..
2-4
Introductions
Specification
Physical Characteristic
Dimension 330 (W) x 224 (D) x 20~6 (H) mm
(minimum height is 6mm)
Weight 1.4 kg (with 4 cell battery)
CPU
Processor Type Intel® Micro FCBGA
Support Processor Intel® Penryn SFF ULV processor/ Intel
(optional)
L2 Cache Based on the CPU type
FSB Speed 533 / 667 MHz or 800/ 1066 MHz
Special Notification The actual processor preinstalled in the notebook depends on
the model you purchased. Please contact the local dealer for
detailed information.
Core Chips
North Bridge+ South Bridge Intel ® Poulsbo (single chip) / Intel ® GS45 + Intel ®
ICH9M-SFF Enhanced
®
AtomTM processor
2-5
Introductions
Memory
Technology DDR2 800MHz
Memory DDR2 SO-DIMM X 1 slot
Maximum 2GB /4GB (optional)
Power
AC Adapter 40W, 20V (optional)
Battery Type 4 cells
8 cells (optional)
RTC Battery Yes
Special Notification The actual battery pack that comes with the package may vary
without notice.
Storage (Items listed here may vary without notice)
HDD form factor 2.5”, 9.5 mm High, SATA
SSD (solid-state disk) 32GB (optional)
External Optical Device USB External ODD (optional)
Special Notification The actual HDD and SSD preinstalled in the notebook depends
on the model you purchased.
2-6
Introductions
I/O Port
Monitor (VGA) 15 pin D-Sub x 1
USB USB 2.0 x 2 / x 3 (optional)
HDMI x 1 (optional)
Mic-in x 1(support Headphone-out function)
Headphone-out x 1
Internal Microphone x 1
RJ45 x 1
Card Reader x 1 (SD/ SDHC/ MMC) (optional)
The supported memory cards may vary without notice.
Communication Port(Items listed here may vary without notice)
LAN 10/100 Ethernet (optional)
10/100/1000 Ethernet (optional)
Wireless LAN Support
Bluetooth Support (optional)
3.5G Support (optional)
Display
LCD Type 13.4" WXGA (Glare type)
Brightness Brightness controlled by K/B hot-keys
2-7
Introductions
Video (optional)
Graphics Intel® Graphics Media Accelerator 4500MHD (optional)
Intel ® Poulsbo (optional)
VRAM Share with the memory
LCD Resolution 1366 x 768
CRT Output Supported
Dual View Function LCD or CRT will be auto detected when connected.
WebCam
CMOS 1.3 Mega Pixel
Audio
Sound Controller Realtek® ALC 888-VC2-GR
Internal Speaker 2 speakers with housing
Sound Volume Adjust by K/B hot-key & SW
Software & BIOS
USB Flash Boot Yes, USB floppy boot up DOS only
BIOS Fast Boot Support --- Yes
Others
Compliance WHQL
2-8
Introductions
Upgrade and Warranty
Please be noticed that the memory, hard disk drive, optical storage drive, and battery
pack preinstalled in the product users purchased may be replaceable and upgradable
by user’s request.
However, please always contact the authorized dealer or service center for the
upgrade service due to any attempt to replace the components of the product may
cause the warranty void.
The figures show here are
for reference onl y.
2-9
Introductions
Product Overview
This section provides the description of basic aspects of the notebook. It will help you to know
more about the appearance of this notebook before using it. Please be aware that the notebook
shown in this section may vary from the actual one that users purchased.
Top-open View
The figure of top-open view and description shown below will lead you to browse the main operating
area of your notebook.
5
1
2
3
1. WebCam
2. Power Button / Power LED
3. Keyboard
4. Touchpad
5. Internal Microphone
4
2-10
Introductions
1. Webcam/ Webcam LED
This built-in Webcam can be used for picture taking, video recoding or conferencing, and
any other interactive applications.
Webcam LED indicator, next to the webcam, grows white when webcam function is
activated; LED goes out when this function is turned off.
2. Power Button / Power LED
Power Button
Press the power button to turn the notebook power ON and OFF.
Power LED:
Glowing white when the notebook power is turned on.
3. Keyboard
The built-in keyboard provides all the functions of a full-sized keyboard.
Quick Launch [Fn] Buttons
Use the [Fn] buttons on the keyboard to activate the specific applications or tools.
With the help of these quick launch buttons, users will be able to do work more efficiently.
Press and hold the Fn button, and then press the F6 button to turn
the Webcam function on. Press again to turn it off.
+
Webca m
Read the icon on behalf of the Webcam function appearing on the
display to learn the Webcam function status.
2-11
Introductions
+
ECO Engine
(Power Saving)
+
Wireless
LAN(WiFi)
+
Bluetooth
(optional)
Press and hold the Fn button, and then press the F5 button to turn
the ECO Engine function on.
Refer to the Power Management section in chapter 3 of this
manual for the detailed information of this ECO Engine, Power
Saving Function.
Press and hold the Fn button, and then press the F8 button to turn
the Wireless LAN (WiFi) function on. Press
again to turn it off.
Read the icon on behalf of the function of Wireless LAN (WiFi)
appearing on the display to learn the function
status.
The actual activate function will be controlled by the Intel PROSet
software
Press and hold the Fn button, and then press the F9 button to turn
the Bluetooth function on. Press again to turn it off.
Read the icon on behalf of the function of Bluetooth appearing on
the display to learn the function status.
2-12
Introductions
Press and hold the Fn button, and then press the F10 button to turn
the 3G function on. Press again to turn it off.
Read the icon on behalf of the function of 3G appearing on the
+
3G
(optional)
display to learn the function status.
If the model you purchased is without 3G function, there is no
function when you Press and hold the Fn button, and then press
the F10 button repeatedly.
Press and hold the Fn button, and then press the F4 button to turn
the windows search function on. Press again to turn it off.
+
P1
Read the icon on behalf of the P1 function appearing on the display
to learn the function status.
4. Touchpad
This is a pointing device of the notebook.
5. Internal Microphone
There is built-in microphone and its function is the same with microphone.
2-13
Introductions
Front Side View
1. Status LED
Bluetooth:
Bluetooth
(optional)
Glowing white when Bluetooth function is activated.
Power On/ Off/ Suspend:
Glowing white when the system is activated.
Blinking white when the system is in suspend mode.
LED goes out when the system is turned off.
Battery:
Glowing white when the battery is being charged.
Glowing amber when the battery is in low battery status.
Blinking amber if the battery fails and it is recommended to replace a
1
1. Status LED
2-14
Introductions
Wirele ss LAN
and 3G/
Wireless LAN
new battery. Consult the local dealer for purchasing an equivalent
type of battery recommended by the manufacturer.
Battery LED goes out when it is fully charged or when the AC adapter
is disconnected.
Wireless LAN and 3G/ Wireless LAN :
Glowing white when wireless LAN function is
enabled.
Glowing yellow green when 3G function is enabled.
LED goes out when all functions are disabled.
Note: For flight safety consideration, make sure this LED goes out when
you are in flight.
Scroll Lock: Glowing white when the Scroll Lock function is activated.
Caps Lock: Glowing white when the Caps Lock function is activated.
Num Lock: Glowing white when the Num Lock function is activated.
Hard Disk:
Blinking white when the system is accessing the hard disk drive device.
2-15
Introductions
Left Side View
3
2
1
4
1. USB Port/ HDMI Connector (optional)
USB Port
The USB 2.0 port allows you to connect USB-interface peripheral devices, such as the mouse,
keyboard, modem, portable hard disk module, printer and more.
HDMI Connector
HDMI (High Definition Multimedia Interface Support) is a new interface standard for PCs,
displays and consumer electronics devices that supports standard, enhanced and
high-definition video, plus multi-channel digital audio on a single cable.
2. RJ-45 Connector
The Ethernet connector is used to connect a LAN cable for network connection.
1. USB Port/
HDMI Connector
2. RJ-45 Connector
3. VGA Port
4. Card Reader
2-16
Introductions
3. VGA Port
The 15-pin-D-sub VGA port allows you to connect an external monitor or other standard
VGA-compatible device (such as a projector) for a great view of the computer display.
4. Card Reader
The built-in card reader may support various types of memory card, such as MMC (Multi-Media
Card), or SD (Secure Digital), SDHC (SD High Capacity) cards. Contact the local dealer for
further and correct information and be noted that the supported memory cards may vary
without notice.
2-17
Introductions
Right Side View
1
1. USB Port
The USB 2.0 port allows you to connect USB-interface peripheral devices, such as the mouse,
keyboard, modem, portable hard disk module, printer and more.
3
2
1. USB Port
2. Audio Port Connectors
3. Power Connector
2-18
Introductions
2. Audio Port Connectors
Make high quality sound blaster with stereo system and Hi-Fi function supported.
Mic-in: Used for an external microphone.
Line In: Used for an external audio device.
Headphone-out: A connector for speakers or headphones.
Headphone-out: A connector for speakers or
headphones.
3. Power Connector
To connect the AC adapter and supply power for the notebook.
2-19
Introductions
Rear Side View
1
1. Battery Pack
1. Battery Pack
This notebook will be powered by the battery pack when the AC adapter is disconnected.
2-20
Introductions
Bottom Side View
1
2
3
5
1. Battery Lock/ Unlock Button
4
2. Battery Pack
3. Battery Release Button
4. SIM Card Slot
5. Ventilator
5
1. Battery Lock/ Unlock Button
Battery cannot be moved when the button is positioned on lock status. Once the button is slid to
unlock position, the battery is removable.
2. Battery Pack
This notebook will be powered by the battery pack when the AC adapter is disconnected.
2-21
Introductions
3. Battery Release Button
It is a bounce-back device as a preparation for releasing the battery pack. Slide it with one hand
and pull the battery pack carefully with the other.
4. SIM card slot (optional)
The notebook provides a SIM Card slot in the battery bay. Insert your SIM card into the SIM
card slot properly to activate the internet connecting function.
5. Ventilator
The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation.
CHAPTER 3
Getting Started
3-2
Getting Started
Power Management
ECO Engine -- Power Saving Function
ECO Engine, the outstanding and unique power saving function, provides 5 different power saving
modes – Gaming mode, Movie mode, Presentation mode, Office mode, and Turbo Battery
mode, to extend the battery running time while performing different tasks with this notebook.
Press and hold the Fn button, and then press the F5 button repeatedly to switch among these 5
different modes or to turn this ECO Engine off recurrently.
To learn which power saving mode is activated presently, read the icon on behalf of each mode
appearing on the display when selected.
Gaming Mode
Select this mode while performing game applications.
Movie Mode
Select this mode while playing multimedia applications
3-3
Getting Started
Presentation Mode
Select this mode while performing presentation applications.
Office Mode
Select this mode while dealing with office documentation tasks.
Tur bo Ba tt ery Mo de
Select this mode to maximize the battery running time.
ECO Off
Selected to disable ECO Engine.
3-4
Getting Started
AC Adapter
Please be noted that it is strongly recommended to connect the AC adapter and use the AC power
while using this notebook for the first time. When the AC adapter is connected, the battery is being
charged immediately.
Note that the AC adapter included in the package is approved for your notebook; using other
adapter model may damage either the notebook or other devices attached to it.
Connecting the AC Power
1. Unpack the package to find the AC adapter and power cord.
2. Attach the power cord to the connector of the AC adapter.
3. Plug the DC end of the adapter to the notebook, and the male end of the power cord to the
electrical outlet.
Disconnecting the AC Power
When you disconnect the AC adapter, you should:
1. Unplug the power cord from the electrical outlet first.
2. Unplug the connector from the notebook.
3. Disconnect the power cord and the connector of AC adapter.
4. When unplugging the power cord, always hold the connector part of the cord. Never pull the
cord directly!
3-5
Getting Started
3-6
Getting Started
Battery Pack
This notebook is equipped with a high-capacity Li-ion battery pack. The rechargeable Li-ion battery
pack is an internal power source of the notebook.
Be aware of that this battery pack may be damaged if users try to disassemble the battery pack on
their own.
Also, note that the limited warranty to the battery pack may also lose its efficacy when this battery
pack is disassembled not by an authorized machinist.
Please follow your local laws and regulations to recycle the unused battery pack.
Be noted that the figures show here are for reference only.
3-7
Getting Started
Releasing the Battery Pack
It is always recommended to have another battery in reserve for enough power supply. Please
contact your local dealer to buy a battery pack that is compliant to your notebook. To remove the
battery pack, following the steps below:
1. Make sure the notebook is turned off, and
the AC power is disconnected.
2. Press the lock/unlock button to the unlocked
position.
3. Locate the battery release button on the
bottom side.
4. Push and hold the release button to the
battery releasing direction as shown on
the bottom side.
5. Carefully slide out the battery pack a bit to
the location with “open” mark.
6. Take the battery pack out of the battery tray.
5
2
4
3
6
3-8
Getting Started
Replacing the Battery Pack
To insert the battery pack, following the steps below:
1. Align the front edge of the battery
pack to the location with “open”
mark shown aside the battery tray
2. Place the battery pack into the
battery tray vertically with correct
orientation.
3. Fasten the battery pack by
pressing it forward to the “Lock”
position
4. Press the lock/unlock button to
the Lock position to make sure
the battery pack is securely
fastened.
1
2
3
4
3-9
Getting Started
Using the Battery Pack
Battery Safety Tips
Replacing or handling the battery incorrectly may present a risk of fire or explosion, which could
cause serious injury.
Only replace the main battery pack with the same or equivalent type of battery.
Do not disassemble, short-circuit or incinerate batteries or store them to temperatures above
+60° C (+140° F).
Do not temper with batteries. Keep away from the reach of children.
Do not use rusty or damaged batteries.
Dispose of batteries according to local regulations. Check with your local solid waste
officials for details about recycling options or for proper disposal in your area.
Conserving Battery Power
Efficient battery power is critical to maintain a normal operation. If the battery power is not
managed well, the saved data and customized settings may be lost.
To optimize battery life and avoid a sudden power loss, read the tips below:
Suspend system operation if the system will be idle for a while or shorten the suspend timer’s
time period.
Turn off the system if you won’t be using it for a period of time.
Disable unnecessary settings or remove idle peripherals.
Connect an AC adapter to the system whenever possible.
3-10
Getting Started
Charging the Battery Pack
The battery pack can be recharged while it is installed in the notebook. Please pay attention to the
following tips before recharging the battery:
If a charged battery pack is not available, save your work and close all running programs and
shut down the system or Save-to-Disk.
Plug in an external AC/DC power source.
You can use the system, suspend system operation or shut down and turn off the system
without interrupting the charging process.
The battery pack uses Lithium-ion battery cells that have no “memory effect.” It is
unnecessary to discharge the battery before recharging. However, to optimize the life of
battery, we suggest that consuming the battery power completely once a month is necessary.
If you do not use the notebook for a long time, it is suggested to remove the battery pack from
your notebook. This may be helpful to extend your battery life.
The actual charging time will be determined by the applications in use.
3-11
Getting Started
Basic Operations
If you are a beginner to the notebook, please read the following instructions to assure your own
safety, and make yourself comfortable during the operations.
Safety and Comfort Tips
The notebook is a portable platform that allows you to work anywhere. However, choosing a good
workspace is important if you have to work with your notebook for a long period of time.
Your work area should have enough illumination.
Choose the proper desk and chair and adjust their height to fit your posture when operating.
When sitting on the chair, adjust the chair’s back (if available) to support your back
comfortably.
Place you feet flat and naturally on the floor, so that your knees and elbows have the proper
position (about 90-degree) when operating.
Put your hands on the desk naturally to support your wrists.
Adjust the angle/position of the LCD panel to have an optimal view.
Avoid using your notebook in the space where may cause you discomfort (such as on the
bed).
The notebook is an electrical device, please treat it with great care to avoid personal injury
3-12
Getting Started
1. Keep your hands and feet with
optimal comfort.
2. Adjust the angle and position of
LCD panel.
3. Adjust the desk’s height.
4. Sit straight and keep a good
posture.
5. Adjust the chair’s height.
2
3
1
1
4
5
Having a Good Work Habit
Have a good work habit is important if you have to work with your notebook for long periods of time;
otherwise, it may cause discomfort or injury to you. Please keep the following tips in mind when
operating.
Change your posture frequently.
Stretch and exercise you body regularly.
Remember to take a break after working for a period of time.
3-13
k
The keyboard shown here
may vary from the actual
one, depending on which
county users purchase the
.
noteboo
Getting Started
Knowing the Keyboard
This notebook provides a full-functioned keyboard. This keyboard can be divided into four
categories: Typ ew riter keys, Cursor keys, Numeric keys and Function keys.
Typewriter keys
Numeric keys
Cursor keys /
Function keys
3-14
Getting Started
Typewriter Keys
In addition to providing the major function of the keyboard, these typewrite keys also provide several
keys for special purposes, such as [Ctrl,] [Alt,] and [Esc] key.
When the lock keys are pressed, the corresponding LEDs will light up to indicate their status:
Num Lock: Press and hold the [Fn] key and press this key to toggle the Num Lock on and off.
When this function is activated, you can use the numeric keys that are embedded in the
typewriter keys.
Caps Lock: Press this key to toggle the Caps Lock on and off. When this function is activated,
the letters you type are kept in uppercase.
Scroll Lock: Press and hold the [Fn] key and press this key to toggle the Scroll Lock on and off.
This function is defined by individual programs, and is usually used under DOS.
Numeric Keys
Find the numeric keys among the keyboard, and activate the Num Lock function to use these
numeric keys to enter numbers and calculations.
3-15
Getting Started
Cursor Keys
The four cursor (arrow) keys and [Home], [PgUp], [PgDn], [End] keys are used to control the cursor
movement.
Move the cursor left for one
space.
Move the cursor right for one
space.
Move the cursor up for one line.
Move the cursor down for one
line.
The Backspace key, [Ins] and [Del] keys at upper right corner are use for editing purpose.
This key is used to switch
the typing mode between
“insert” and “overtype”
modes.
Press this key to delete one character to the left of the cursor and move the
following text left for one space.
Move to the previous page.
Move to the next page.
Move to the beginning of the line
(or document).
Move to the end of the line (or
document).
Press this key to delete one
character to the right of the
cursor and move the following
text left for one space.
3-16
Getting Started
Function Keys
Windows Keys
You can find the Windows Logo key (
keyboard, which are used to perform Windows-specific functions, such as opening the Start
menu and launching the shortcut menu. For more information of the two keys, please refer to
your Windows manual or online help.
[Fn] Key
Switch the display output mode
between the LCD, external
+
monitor and both.
) and one Application Logo key ( ) on the
Decrease the built-in speaker’s
volume.
+
Enable or disable the touchpad
+
function.
Decrease the LCD brightness.
+
Increase the LCD brightness.
+
Increase the built-in speaker’s
volume.
+
Disable the computer’s audio
function.
+
Force the computer into suspend
mode (depending on the system
+
configuration).
3-17
Getting Started
Knowing the Touchpad
The touchpad integrated in your notebook is a pointing device that is compatible with standard
mouse, allowing you to control the notebook by pointing the location of the cursor on the screen and
making selection with its two buttons.
1. Cursor Movement Area
This pressure-sensitive area of the touchpad,
allows you to place your finger on and control
the cursor on the screen by moving one of
your finger.
2. Right / Left Buttons
Acts as the mouse’s right/ left button.
1
2
2
3-18
Getting Started
Using the Touchpad
Read the following description to learn how to use the touchpad:
Configuring the Touchpad
You can customize the pointing device to meet your personal needs. For example, if you are a
left-handed user, you may want to swap the functions of the two buttons. In addition, you can
change the size, shape, moving speed and other advanced features of the cursor on the screen.
To configure the touchpad, you can use the standard Microsoft or IBM PS/2 driver in your
Windows operating system. The Mouse Properties in Control Panel allows you to change
the configuration.
Positioning and Moving
Place your finger on the touchpad (usually using the forefinger), and the rectangular pad will act
as a miniature duplicate of your display. When you move your fingertip across the pad, the
cursor on the screen will move simultaneously to the same direction. When your finger
reaches the edge of the pad, lift your finger and place it on a proper location of the touchpad to
continue the movement.
Point and Click
When you have moved and placed the cursor over an icon, a menu item or a command that you
want to execute, simply tap slightly on the touchpad or press the left button to select. This
procedure, called as point and click is the basics of operating your notebook. Unlike the
traditional pointing device such as the mouse, the whole touchpad can act as a left button, so
3-19
Getting Started
that your each tap on the touchpad is equivalent to pressing the left button. Tapping twice
more rapidly on the touchpad is to execute a double-click.
Drag and Drop
You can move files or objects in your notebook by using drag-and-drop. To do so, place the
cursor on the desired item and slightly tap twice on the touchpad, and then keep your fingertip in
contact with the touchpad on the second tap. Now, you can drag the selected item to the
desired location by moving your finger on the touchpad, and then lift your finger from the
touchpad to drop the item into place. Alternately, you can press and hold the left button when
you select an item, and then move your finger to the desired location; finally, release the left
button to finish the drag-and-drop operation.
1. Move the cursor by sliding your
fingertip.
2. Put your wrist on the desk
comfortably.
1
2
3-20
Getting Started
About Hard Disk Drive
Your notebook is equipped with a 2.5-inch hard disk drive. The hard disk drive is a storage device
with much higher speed and larger capacity than other storage devices, such as the floppy disk drive
and optical storage device. Therefore, it is usually used to install the operating system and
software applications.
To avoid unexpected data loss in your system, please backup your critical files regularly.
Do not turn off the notebook when the hard disk In-use LED is on.
Do not remove or install the hard disk drive when the notebook is turned on. The replacement of
hard disk drive should be done by an authorized retailer or service representative.
3-21
y
The devices shown in the
reference figures here ma
be different from the devices
users have.
Getting Started
Connecting the External Devices
The I/O (input/output) ports on the notebook allow you to connect peripheral devices. All devices
listed here are for reference only.
Using the External Optical Storage Device
An optional external optical storage device may come with the package of the notebook. The
actual external optical storage device may vary depending on the model you purchased.
3-22
Getting Started
DVD Combo Drive: This device allows you to read DVD and CD, and record CD format.
DVD Dual Drive: In addition to read DVD and CD, this device allows you to record CD format
and both the –R/RW and +R/RW DVD formats.
Super Multi: Works as a multi-functional DVD Dual Drive and a DVD RAM Drive.
Blu-ray: It is a high-capacity optical disc that holds the high-definition video (HD) on a
single-sided disk. Blu-ray supports the more advanced H.264 and VC-1 video encoding
algorithms (codecs) as well as MPEG-2, which is used for DVD. It also supports the highest
HDTV resolution.
3-23
Getting Started
Connecting the Peripheral Devices
Connecting the USB devices
This notebook provides USB ports for connecting various USB devices, such as mouse, keyboard,
digital camera, webcam, printer, and external optical storage device, ete.. To connect these
devices, install the drivers for each device first if necessary, and then connect the device to the
notebook. This notebook is capable to auto detect the USB devices installed, and if there is no
detection of the devices, please manually enable the USB devices by going to Start Menu / Control
Panel / Add Hardware to add the new device.
3-24
Getting Started
Connecting the External Display Devices
This notebook provides a VGA port for connecting a larger display with higher resolution. The
15-pin-D-sub VGA port allows users to connect an external monitor or other standard
VGA-compatible device (such as a projector) for a great view of the notebook display.
3-25
Getting Started
This notebook provides a HDMI port (optional) for connecting a larger display with higher resolution.
HDMI (High Definition Multimedia Interface Support) is a new interface standard for PCs, displays
and consumer electronics devices that supports standard, enhanced and high-definition video, plus
multi-channel digital audio on a single cable.
Once the display is connected to the notebook, power on the notebook and the external display
should respond by default. If not, you can switch the display mode by pressing [Fn]+[F2].
Alternately, you can change the display mode by configuring the settings in Display Properties of
Windows operating system.
3-26
Getting Started
Connecting the Communication Devices
Using the LAN
The RJ-45 connector of the notebook allows you to connect the LAN (local area network) devices,
such as a hub, switch and gateway, to build a network connection.
For more instructions or detailed steps on connecting to the LAN, please ask your MIS staff or
network manager for help.
3-27
Getting Started
Safely Remove Hardware
When any peripheral device is connected to the notebook, the Safely Remove Hardware icon will
appear on the taskbar. Double-click the icon to bring up the Safely Remove Hardware dialog box.
You can see all connected peripheral devices here. If you want to remove any of the devices,
move the cursor to the device and click Stop. The diagram shown below is for reference only.
Safely Remove Hardware
Select the device you want to unplug or eject, and then click Stop.
When Windows notifies you that it is safe to do so unplug the
device from your computer.
Hardware Devices:
USB Mass Storage Device
Stop a Hardware device
Confirm devices to be stopped. Choose OK To continue.
Windows will attempt to stop the following devices. After the
devices are stopped they may be removed safely.
USB Mass Storage Device
3
4
OKCancel
1
PropertiesStop
2
Close
CHAPTER 4
BIOS Setup
4-2
BIOS Setup
About BIOS Setup
When to Use BIOS Setup?
You may need to run the BIOS Setup when:
An error message appears on the screen during the system booting up and is requested to
run SETUP.
You want to change the default settings for customized features.
You want to reload the default BIOS settings.
How to Run BIOS Setup?
To run the BIOS Setup Utility, turn on the notebook and press the [Del] key during the POST
procedure.
If the message disappears before you respond and you still wish to enter Setup, either restart the
system by turning it OFF and ON, or simultaneously pressing [Ctrl]+[Alt]+[Delete] keys to restart.
Be noted that the screen snaps and setting options in this chapter are for your references only.
The actual setting screens and options on your Notebook may be different because of BIOS update.
4-3
BIOS Setup
Control Keys
You can use only the keyboard to control the cursor in the BIOS Setup Utility.
Press left arrow to select one
menu title.
Press up arrow to select one item
under the menu title.
Press right arrow to select one
menu title.
Press down arrow to select one
item under the menu title.
+
Increase the setting value or make changes.
Decrease the setting value or make changes.
1) Open the selected item to change setting options.
2) Bring up a sub-menu when available.
In some items, press this key to change setting field.
Bring up help screen providing the information of control keys.
1) Exit the BIOS Setup Utility.
2) Return to the previous screen in a sub-menu.
4-4
BIOS Setup
BIOS Setup Menu
Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. Select the tags to
enter the other menus.
Main Menu
Show system overview information about BIOS version, CPU features, memory
size and setting of system time and date.
Advanced Menu
Adjust the advanced settings, such as power consumption, USB/ PCI devices,
of the notebook in order to achieve a better performance.
Security Menu
Install or clear the password settings for supervisor and user.
Boot Menu
Set up boot type and boot sequence.
Exit Menu
Save or discard the changes before leaving the BIOS Setup Menu.
4-5
BIOS Setup
Main Menu
System Date
This item allows you to set the system date. The date format is
[day:month:date:year].
Day
Month (Month)
Date (Date)
Yea r (Ye ar)
System Time
This item allows you to set the system time. The system clock will go on
no matter you shut down the PC or get into sleep mode. The time format
is [hour:minute:second].
SSD/ SATA HDD (optional)
This item displays the types of Hard Disk Drives that installed in the
notebook. Press [Enter] to bring up a window showing the detailed
information of the device, including the device name, vendor, etc..
Day of the week, from Sun to Sat, which is
determined by BIOS (read-only).
The month from 01 (January) to 12 (December).
The date from 01 to 31.
The year can be adjusted by users.
4-6
BIOS Setup
Serial ATA (optional)
The item displays the types of the SATA devices installed in the notebook.
Press [Enter] to bring up a window showing the detailed information of the
device, including the device name, vendor, LBA mode, PIO mode and
more.
System Information
This item provides the information about the firmware, processor, and
system memory.
4-7
BIOS Setup
Advanced Menu
Intel(R) SpeedStep(tm) tech.
This item allows you to enable or disable Intel SpeedStep technology.
When set to Disabled, the system always operates in a conserve power
mode (the processor works at FSB400-600MHz or FSB533-800MHz). If
you want optimize the processor, set this item to Enabled, so that the
processor’s speed will be controlled by the use of your operating system
and applications. Setting options: Enabled, and Disabled.
PCI Latency Timer
This item controls how long each PCI device can hold the bus before
another takes over. When set to higher values, every PCI device can
conduct transactions for a longer time and thus improve the effective PCI
bandwidth. For better PCI performance, you should set the item to higher