Hereby, NOKIA CORPORATION declares that this RM-421 product is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://
www.nokia.com/phones/declaration_of_conformity/.
Nokia, Nokia Connecting People, Nseries, N95, N-Gage, Visual Radio, and Nokia Care are trademarks or registered trademarks of Nokia Corporation.
Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their
respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia
is prohibited.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which
has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in
connection with MPEG-4 video provid ed by a licensed video provider. No license is granted or shall be implied for any other use. Additional inf ormation,
including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.
.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this
document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY
LOSS OF DATA OR INCOME O R ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DO CUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION
TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT T O REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME
WITHOUT PRIOR NOTICE.
The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related
to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility
for end-user support, functionality of the applications, or the information in the applications or these materials. Nokia does not provide any warranty
for the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO
THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIAT ES MAKE ANY REPRESENTATIONS
OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for
details, and availability of language options.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion
contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment).The FCC or Industry
Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service
facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or
modifications not expressly approved by Nokia could void the user's authority to operate this equipment.
/Issue 1
Contents
For your safety ..........................................10
Contents
About your device.........................................................11
Read these simple guidelines. Not following them
may be dangerous or illegal. Read the complete user
guide for further information.
For your safety
10
SWITCH ON SAFELY
Do not switch the device on when wireless
phone use is prohibited or when it may
cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands
free to operate the vehicle while driving.
Your first consideration while driving should
be road safety.
INTERFERENCE
All wireless devices may be susceptible to
interference, which could affect
performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off
near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can
cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Do not use the device at a refueling point. Do
not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the
device where blasting is in progress.
USE SENSIBLY
Use only in the positions as explained in the
product documentation. Do not touch the
antenna areas unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or
repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and
batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it
dry.
BACK-UP COPIES
Remember to make back-up copies or keep
a written record of all important information
stored in your device.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read
its user guide for detailed safety
instructions. Do not connect incompatible
products.
EMERGENCY CALLS
Ensure the phone function of the device is
switched on and in service. Press the end key
as many times as needed to clear the display
and return to the standby mode. Enter the
emergency number, then press the call key.
Give your location. Do not end the call until
given permission to do so.
About your device
The wireless device described in this guide is approved
for use on the (E)GSM 850, 900, 1800, 1900 MHz, and
WCDMA (HSDPA) 850 and 1900 MHz networks. Contact
your service provider for more information about
networks.
When using the features in this device, obey all laws
and respect local customs, privacy and legitimate
rights of others, including copyrights.
Not all networks support all features offered in this
device. For instance, video calls, video sharing, pushto-talk, and instant messaging are not compatible with
the networks in the United States of America.
Copyright protections may prevent some images,
music (including ringing tones), and other content
from being copied, modified, transferred, or
forwarded.
Your device supports internet connections and other
methods of connectivity. Like computers, your device
may be exposed to viruses, malicious messages and
applications, and other harmful content. Exercise
caution and open messages, accept connectivity
requests, download content, and accept installations
only from trustworthy sources. To increase the security
of your devices, consider installing, using, and
regularly updating antivirus software, firewall, and
other related software on your device and any
connected computer.
Warning: To use any features in this device,
other than the alarm clock, the device must be
switched on. Do not switch the device on when
wireless device use may cause interference or danger.
The office applications support common features of
Microsoft Word, PowerPoint, and Excel (Microsoft Office
2000, XP, and 2003). Not all file formats can be viewed
or modified.
For your safety
11
During extended operation, such as an active video
sharing session or high-speed data connection, the
device may feel warm. In most cases, this condition is
normal. If you suspect the device is not working
properly, take it to the nearest authorized service
facility.
Your device may have preinstalled bookmarks and links
for third-party internet sites. You may also access other
For your safety
third-party sites through your device. Third-party sites
are not affiliated with Nokia, and Nokia does not
endorse or assume liability for them. If you choose to
access such sites, you should take precautions for
security or content.
The images in this guide may differ from your device
display.
Network services
To use the phone you must have service from a wireless
service provider. Many of the features require special
network features. These features are not available on
all networks; other networks may require that you
make specific arrangements with your service provider
before you can use the network services. Your service
provider can give you instructions and explain what
charges will apply. Some networks may have
limitations that affect how you can use network
services. For instance, some networks may not support
12
all language-dependent characters and services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If
so, these features will not appear on your device menu.
Your device may also have a special configuration such
as changes in menu names, menu order, and icons.
Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL)
that run on TCP/IP protocols. Some features of this
device, such as MMS, browsing, and e-mail require
network support for these technologies.
Enhancements, batteries,
and chargers
Always switch the device off and disconnect the
charger before removing the battery.
Check the model number of any charger before use
with this device. This device is intended for use when
supplied with power from the DC-4, AC-4, or AC-5
charger and from an AC-1, ACP-8, ACP-9, ACP-12, or
LCH-12 charger when used with the CA-44 charger
adapter.
The battery intended for use with this device is BL-6F.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please
check with your dealer. When you disconnect the
power cord of any enhancement, grasp and pull the
plug, not the cord.
For your safety
13
Get connected
Get connected
14
Nokia N95 8GB supports the following connectivity
methods:
● 2G and 3G networks
● Bluetooth connectivity — to transfer files and
connect to compatible enhancements.
"Bluetooth connectivity", p. 36.
● Nokia AV connector (3.5 mm) — to connect to
compatible headsets, headphones, TVs , or home
stereo sets.
● Data cable — to connect to compatible devices,
such as printers and PCs.
● Wireless LAN (WLAN) — to connect to the internet
and WLAN enabled devices.
LAN", p. 33.
● Infrared — to transfer and synchronise data
between compatible devices.
Infrared", p. 39.
● GPS — to connect to GPS satellites to measure
your location.
See "TV-out mode", p. 77.
See "USB", p. 40.
See "Wireless
See "
See "Positioning (GPS)", p. 85.
See
Useful information
Model number: N95-4
Hereinafter referred to as Nokia N95 8GB.
For local services and warranty information, please
refer to the separate booklet.
Help
Your device has context-sensitive help. When an
application is open, select Options > Help to
access help for the current view.
When you are reading the instructions, to switch
between help and the applica tion that is open in the
background, press and hold
To open help from the main menu, select Tools >
Utilities > Help. Select the desired application to
view its help topics.
.
Get started
See the get started guide for keys and parts
information, instructions for setting up the device
and for other essential information.
Additional applications
There are various applications provided by Nokia
and different third-party software developers that
help you do more with your device. These
applications are explained in the guides that are
available on the product support pages of the Nokia
website.
Software updates
Nokia may produce software updates that may offer
new features, enhanced functions, or improved
performance. You may be able to request these
updates through the Nokia Software Updater PC
application. To update the device software, you
need the Nokia Software Updater application and a
compatible PC with Microsoft Windows 2000, XP, or
Vista operating system, broadband internet access,
and a compatible data cable to connect your device
to the PC.
To get more information and to download the Nokia
Software Updater application, visit
www.nokiausa.com/softwareupdate in the United
Useful information
15
States or www.latinoamerica.nokia.com/nsu in
Latin America.
Tip: To check the software version in your
device, enter *#0000# in the standby mode.
Settings
Your device normally has MMS, GPRS, streaming, and
mobile internet settings automatically configured
Useful information
in the device, based upon your network service
provider information. You may have settings from
your service providers already installed in your
device, or you may receive or request the settings
from the network service providers as a special
message.
You can change the general settings in your device,
such as language, standby mode, display, and
keypad lock settings.
settings", p. 141.
See "General
Access codes
If you forget any of the access codes, contact your
service provider.
● Personal identification number (PIN) code — This
code protects your SIM card against
16
unauthorised use. The PIN code (4 to 8 digits) is
usually supplied with the SIM card. After three
consecutive incorrect PIN code entries, the code
is blocked, and you need the PUK code to unblock
it.
● UPIN code — This code may be supplied with the
USIM card. The USIM card is an enhanced version
of the SIM card and is supported by UMTS mobile
phones.
● PIN2 code — This code (4 to 8 digits) is supplied
with some SIM cards, and is required to access
some functions in your device.
● Lock code (also known as security code) — This
code (5 digits) can be used to lock the device to
avoid unauthorised use. The factory setting for
the lock code is 12345. To avoid unauthorised
use of your device, change the lock code. Keep
the new code secret and in a safe place separate
from your device. Try entering the code only
once, if you forget the code. If the code you
entered is not correct, contact a Nokia Care point
or your service provider for further instructions.
● Personal unblocking key (PUK) code and PUK2
code — These codes (8 digits) are required to
change a blocked PIN code or PIN2 code,
respectively. If the codes are not supplied with
the SIM card, contact the operator whose SIM
card is in your device.
● UPUK code — This code (8 digits) is required to
change a blocked UPIN code. If the code is not
supplied with the USIM card, co ntact the operator
whose USIM card is in your device.
Prolong battery life
Many features in your device increase the demand
on battery power and reduce the battery life time.
To save battery power, note the following:
● Features that use Bluetooth technology, or
allowing such features to run in the background
while using other features, increase the demand
on battery power. To prolong the operating time
of your device, turn the Bluetooth technology off
when you do not need it.
● Features that use wireless LAN (WLAN), or
allowing such features to run in the background
while using other features, increase the demand
on battery power. WLAN on your Nokia device
switches off when you are not trying to connect,
not connected to another access point, or not
scanning for available networks. To further
reduce battery consumption, you can specify that
your device does not scan, or scans less often, for
available networks in the background. WLAN
switches off in between background scans.
"Wireless LAN", p. 33. When Scan for
networks is set to Never, the WLAN availability
icon is not shown in the standby mode. However,
you can still manually scan for available WLAN
networks and connect to WLAN networks as
usual.
See
● If you have set Packet data connection to
When available in connection settings, and
there is no packet data coverage (GPRS), the
device periodically tries to establish a packet
data connection, which causes increased
demand on battery power. To prolong the
operating time of your device, select Packet
data connection > When needed.
● The Maps application downloads new map
information when you scroll to new areas on the
map, which increases the demand on battery
power. You can prevent the device from
automatically downloading new maps.
"Maps", p. 87.
● If the signal strength of the cellular network
varies much in your area, your device must scan
for the available network repeatedly. This
increases the demand on battery power.
If the network mode is set to dual mode in the
network settings, the device searches for the
UMTS network. If it is not available, the device
uses the available GSM network. To only use the
GSM network, press
Settings > Phone > Network > Network
mode > GSM.
● The backlight of the display increases the
demand on battery power. To change the timeout after which the backlight is switched off,
press
, and select Tools > Settings >
, and select Tools >
See
Useful information
17
General > Personalization > Display >
Light time-out. To adjust the light sensor that
observes the lighting conditions and adjusts the
brightness of the display, in the display settings,
select Light sensor.
● Leaving applications running in the background
increases the demand on battery power. To close
the applications you do not use, press and hold
, scroll to an application in the list, and press
C.
Useful information
Pressing C does not close Music player. To close
Music player, select it from the list and Options >
Exit.
Free memory
Many features of the device use memory to store
data. The device notifies you if the device memory
is low.
To vi ew t he type s o f da ta you ha ve i n t he d ev ice an d
how much memory the different data types
consume, press
Options > Memory details. The amount of
available memory is shown in Free memory.
To free device memory, transfer data to a
compatible PC.
To remove data to free memory, use File manager
18
to delete files you no longer need, or go to the
, and select Tools > File mgr. >
respective application. You can remove the
following:
● Messages in the folders in Messaging and
retrieved e-mail messages from the mailbox
● Saved web pages
● Contact information
● Calendar notes
● Applications shown in Application manager that
you do not need
● Installation files (.sis or .sisx) of applications you
have installed to your device.
● Images and video clips in Gallery. Back up the files
to a compatible PC using Nokia Nseries PC Suite.
If you are deleting multiple items and one of the
following notes is shown, delete items, one by one,
beginning with the smallest item:
● Not enough memory to perform operation.
Delete some data first.
● Memory low. Delete some data from phone
memory.
Your device
Welcome
When you switch on your device, the Welcome
application is displayed.
Select from the following:
● Sett. wizard — to configure various settings,
such as e-mail. For more information on the
Settings wizard application, see the guides
available at the Nokia product support pages or
your local Nokia website.
● Switch — to transfer content, such as contacts
and calendar entries, from a compatible Nokia
device.
See "Transfer content", p. 19.
There may also be a demonstration about your
device available in the Welcome application.
To access the Welcome application later, press
and select Tools > Utilities > Welcome. You can
also access the individual applications from their
menu locations.
Switch
Transfer content
With the Switch application, you can transfer
content, such as contacts, between two compatible
Nokia devices using Bluetooth connectivity or
infrared.
The type of content that can be transferred depends
on the model of the device from which you want to
transfer content. If the other device supports
synchronisation, you can also synchronise data
between the other device and your device. Your
device notifies you if the other device is not
compatible.
If the other device cannot be powered on without
a SIM card, you can insert your SIM card in it. When
,
your device is switched on without a SIM card, the
offline profile is automatically activated.
Transfer content
1. To retrieve data from the other device for the
first time, on your device, select Switch in the
Welcome application, or press
Tools > Utilities > Switch.
, and select
Your device
19
2. Select the connection type you want to use to
transfer the data. Both devices must support the
selected connection type.
3. If you select Bluetooth connectivity: To have
your device search for devices with Bluetooth
connectivity, select Continue. Select the device
Your device
from which you want to transfer content. You
are asked to enter a code on your device. Enter
a code (1-16 digits), and select OK. Enter the
same code on the other device, and select OK.
The devices are now paired.
devices", p. 38.
For some device models, the Switch application
is sent to the other device as a message. To
install the Switch application on the other
device, open the message, and follow the
instructions on the display.
If you select infrared, connect the two devices.
See " Infrared", p. 39.
4. From your device, select the content you want to
transfer from the other device.
Once the transfer has started, you can cancel it
and continue later.
Transferring time depends on the amount of data
to be transferred.
Content is transferred from the memory of the other
de vic e to the c orr espo ndi ng lo cati on i n yo ur de vic e.
20
See "Pair
Synchronise, retrieve, or send
content
After the first transfer, select from the following to
start a new transfer, depending on the model of the
other device:
to synchronise content between your device
and the other device, if the other device supports
synchronisation. The synchronisation is two-way. If
an item is deleted in one device, it is deleted in both.
You cannot restore deleted items with
synchronisation.
to retrieve data from the other device to your
device. With retrieval, data is transferred from the
other device to your device. You may be asked to
keep or delete the original data in the other device,
depending on the device model.
to send data from your device to your other
device
If Switch cannot transfer an item, depending on the
type of the other device, you can add the item to the
Nokia folder to C:\Data\Nokia or E:\Data\Nokia
and transfer it from there. When you select the
folder to transfer, the items are synchronised in the
corresponding folder in the other device, and vice
versa.
Use shortcuts to repeat a transfer
After a data transfer, you can save a shortcut with
the transfer settings to the main view to repeat the
same transfer later.
To edit the shortcut, scroll to it, and select
Options > Shortcut settings. You can, for
example, create or change the name of the shortcut.
A transfer log is shown after every transfer. To view
the log of a previous transfer, scroll to a shortcut in
the main view, and select Options > View log.
Handle transfer conflicts
If an item to be transferred has been edited in both
devices, the device attempts to merge the changes
automatically. If this is not possible, there is a
transfer conflict. Select Check one by one, Priority
to this phone, or Priority to other phone to solve
the conflict. For further instructions, select
Options > Help.
Display indicators
The device is being used in a GSM network
(network service).
The device is being used in a UMTS network
(network service).
You have one or more unread messages in the
Inbox folder in Messaging.
You have received new e-mail in the remote
mailbox.
There are messages waiting to be sent in the
Outbox folder.
You have missed calls.
The ringing type is set to silent, and the message
alert tone and e-mail alert tone are set to off.
The device keypad is locked.
A clock alarm is active.
The second phone line is being used (network
service).
All calls to the device are diverted to another
number (network service). If you have two phone
lines, a number indicates the active line.
A compatible headset is connected to the device.
A compatible TV out cable is connected to the
device.
A compatible text phone is connected to the
device.
A data call is active (network service).
A G PRS packet data co nnect ion is activ e (netw ork
service).
that a connection is available.
A packet data conn ecti on is active in a par t of t he
network that supports EGPRS (network service).
indicates the connection is on hold and
Your device
21
indicates the connection is on hold and that a
connection is available. The icons indicate that
EGPRS is available in the network, but your device i s
not necessarily using EGPRS in the data transfer.
A UMTS packet data connection is active (network
service).
Your device
that a connection is available.
High-speed downlink packet access (HSDPA) is
supported and active (network service).
the connection is on hold and
is available.
Y ou ha ve se t t he de vice to scan for wireless LANs,
and a wireless LAN is available (network service).
See "About WLAN", p. 33.
network that has encryption.
A wireless LAN connection is active in a network
that does not have encryption.
Bluetooth connectivity is on. See "Bluetooth
connectivity", p. 36.
connectivity. When the indicator is blinking, your
device is trying to connect with another device.
is blinking, the device is trying to connect to the
22
other device or the connection has been lost.
indicates the connection is on hold and
that a connection
See "Fast downloading", p. 24.
A wireless LAN connection is active in a
Data is being transmitted using Bluetooth
A USB connection is active.
An infrared connection is active. If the indicator
indicates
Volume and loudspeaker
control
To increase or decrease the volume level when you
have an active call or are listening to a sound, use
the volume key.
The built-in loudspeaker
allows you to speak and
listen from a short
distance without having to hold the device to your
ear.
Warning: Do not hold the device near your
ear when the loudspeaker is in use, because the
volume may be extremely loud.
To use the loudspeaker during a call, select
Options > Activate loudspeaker.
To turn off the loudspeaker, select Options >
Activate handset.
Lock the keypad
To lock the keys, press the left selection key, then
the right selection key.
To unlock the keys, open the 2-way slide, or press
the left selection key, then the right selection key.
You can select to lock the keypad automatically after
a time-out or when the 2-way slide is closed.
"Security settings", p. 143.
See
Offline profile
Press , and select Tools > Profiles > Offline.
The offline profile lets you use the device without
connecting to the wireless network. When you
activate the offline profile, the connection to the
wireless network is turned off, as indicated by
the signal strength indicator area. All wireless RF
signals to and from the device are prevented. If you
try to send messages, they are placed in the outbox
to be sent later.
When the offline profile is active, you can use your
device without a SIM card.
Important: In the offline profile you cannot
make or re ceiv e any call s, or use o ther features tha t
require cellular network coverage. Calls may still be
possible to the official emergency number
programmed into your device. To make calls, you
must first activate the phone function by changing
profiles. If the device has been locked, enter the lock
code.
When you have activated the offline profile, you can
still use the wireless LAN, for example, to read your
e-mail or browse on the internet. Remember to
in
comply with any applicable safety requirements
when establishing and using a wireless LAN
connection. You can also use Bluetooth connectivity
while in the offline profile.
To leave the offline profile, press the power key
briefly, and select another profile. The device reenables wireless transmissions (providing there is
sufficient signal strength).
Games
You can play high-quality multiplayer N-Gage™
games with your device.
Your device includes either one of the following
applications in the main menu:
● Discover N-Gage application — With this preview
application you can get information about the
upcoming N-Gage gaming experience, try out
game demos, and download and install the full
N-Gage application when it becomes available.
● N-Gage application — The full featured
application gives you access to the complete NGage experience replacing the Discover N-Gage
application in the menu. You can find new
games, try and buy games, find other players,
and access scores, events, chat, and more. Some
features may not be available at the time of
software installation on your device, check
www.n-gage.com for software updates.
Your device
23
For the full N-Gage experience, you need internet
access on your device, either through the cellular
network or wireless LAN. Contact your service
provider for more information on data services.
For more information, visit www.n-gage.com.
Your device
Multimedia menu
With the multimedia
menu, you can view your
most frequently used
multimedia content. The
selected content is shown
in the appropriate
application.
To open or close the
multimedia menu, press
the multimedia key. To
browse the tiles, scroll left
or right. To select items,
press the scroll key. To return to the multimedia
menu from an open application, press the
multimedia key.
Select from the following:
● Music — Ente r Mu sic play er and the Now playing
view, browse your songs and play lists, or
download and manage podcasts.
24
● Gallery — View your last taken picture, start a
slide show of your images, or view media files in
albums.
● Games — Try out Nokia Nseries games.
● Maps — View your favourite locations in Maps.
● Internet — View your favourite web links in the
browser.
● Contacts — Add your own contacts, send
messages, or make voice calls. To add a new
contact to an empty position on the list, press the
scroll key, and select a contact. To send a
message, in the multimedia menu, select a
contact, and Send text message or Send
multimedia msg..
● Videos — View your favourite videos, and video
clips saved in Nokia Video Centre.
To change the order of the tiles, select Options >
Arrange tiles.
Fast downloading
High-speed downlink packet access (HSDPA, also
called 3.5G, indicated by
in UMTS networks and provides high-speed data
downloads. When HSDPA support in the device is
activated and the device is connected to a UMTS
network that supports HSDPA, downloading data
such as messages, e-mail, and browser pages
through the cellular network may be faster. An
) is a network service
active HSDPA connection is indicated by . See
"Display indicators", p. 21.
You can activate or deactivate support for HSDPA in
the device settings.
settings", p. 151.
For availability and subscription to data connection
services, contact your service provider.
HSDPA only affects the download speed; sending
data to the network, such as messages and e-mail,
is not affected.
See "Packet data
Your device
25
Web browser
With the Web browser, you can view hypertext
markup language (HTML) web pages on the internet
as originally designed. You can also browse web
Web browser
pages that are designed specifically for mobile
devices, and use extensible hypertext markup
language (XHTML), or the wireless markup langu age
(WML).
To browse the web, you need to have an internet
access point configured in your device.
Browse the web
Press , and select Web.
Shortcut: To start the browser, press and
hold 0 in the standby mode.
Important: Use only services that you trust
and that offer adequate security and protection
against harmful software.
Important: Only install and use applications
and other software from trusted sources, such as
applications that are Symbian Signed or have
26
passed the Java Verified
TM
testing.
To browse a web page, in the bookmarks view,
select a bookmark, or enter the address in the field
(
), and press the scroll key.
Some web pages may contain material, such as
graphics and sounds, that requires a large amount
of memory to view. If your device runs out of
memory while loading such a page, the graphics on
the page are not shown.
To browse web pages without graphics, to save
memory, select Options > Settings > Page >
Load content > Text only.
To enter a new web page address you want to visit,
select Options > Go to web address.
Tip: To visit a web page saved as a bookmark
in the bookmarks view, while browsing, press
1, and select a bookmark.
To retrieve the latest content of the page from the
server, select Options > Navigation options >
Reload.
To save the web address of the current page as a
bookmark, select Options > Save as bookmark.
To use visual history to view snapshots of the pages
you have visited during the current browsing
session, select Back (available if History list is set
on in the browser settings and the current page is
not the first page you visit). To go to a previously
visited page, select the page.
To save a page while browsing, select Options >
Tools > Save page.
You can save pages and browse them later when
offline. You can also group these saved pages into
folders. To access the pages you have saved, select
Options > Bookmarks > Saved pages.
To open a sublist of commands or actions for the
page that is open, select Options > Service
options (if supported by the web page).
To allow or prevent the automatic opening of
multiple windows, select Options > Window >
Block pop-ups or Allow pop-ups.
Shortcuts while browsing
● Press 1 to open your bookmarks.
● Press 2 to search for keywords in the current
page.
● Press 3 to return to the previous page.
● Press 5 to list all open windows.
● Press 8 to show the page overview of the current
page. Press 8 again to zoom in and view the
desired section of the page.
● Press 9 to enter a new web address.
● Press 0 to go to the home page (if defined in
settings).
● Press * and # to zoom in or out on the page.
Tip: To return to the standby mode with the
browser open in the background, press
twice or the end key. To return to the browser,
press and hold
from the list.
, and select the browser
Browser toolbar
The browser toolbar helps you select frequently
used functions of the browser.
To open the toolbar, press and hold the scroll key
on an empty spot on a web page. To move within
the toolbar, scroll left or right. To select a feature,
press the scroll key.
In the toolbar, select from the following:
● Frequently used links — View a list of the web
addresses you visit frequently.
● Page overview — See an overview of the
current web page.
● Find — Search for keywords within the current
page.
● Reload — Refresh the page.
● Subscribe to web feeds (if available) — View a
list of available web feeds on the current web
page, and subscribe to a web feed.
Web browser
27
Navigate pages
Mini Map and page overview help you navigate web
pages that contain a large amount of information.
When Mini Map is set on in the browser settings and
you scroll through a large web page, Mini Map opens
and shows an overview of the web page you
Web browser
browse.
To set Mini Map on, select Options > Settings >
General > Mini map > On.
To move in Mini Map, scroll left, right, up, or down.
When you find the desired location, stop scrolling.
Mini Map disappears and leaves you at the selected
location.
When you are browsing a web page that contains a
large amount of information, you can also use Page
overview to view what kind of information the
page contains.
To show the page overview of the current page,
press 8. To find the desired spot on the page, scroll
up, down, left, or right. Press 8 again to zoom in and
view the desired section of the page.
Web feeds and blogs
Web feeds are xml files on web pages that are used
by the weblog community and news organisations
28
to share the latest headlines or text, for example,
news feeds. Blogs or weblogs are web diaries. Most
of the web feeds use RSS and Atom technologies. It
is common to find web feeds on web, blog, and wiki
pages.
The Web application automatically detects if a web
page contains web feeds.
To subscribe to a web feed, select Options >
Subscribe.
To view the web feeds to which you have
subscribed, in the bookmarks view, select Web
feeds.
To update a web feed, select it and Options >
Refresh.
To define how the web feeds are updated, select
Options > Settings > Web feeds.
Widgets
The web browser supports widgets (network
service). Widgets are small, downloadable web
applications that deliver multimedia, news feeds,
and other information, such as weather reports, to
your device. Installed widgets appear as separate
applications in the Applications folder.
You can download widgets using the Download!
application or from the web.
The default access point for widgets is the same as
in the web browser. When active in the background,
some widgets may update information
automatically to your device.
Content search
To search for keywords, phone numbers, or e-mail
addresses within the current web page, select
Options > Find and the desired option. To go to
the previous match, scroll up. To go to the next
match, scroll down.
Tip: To search for keywords within the page,
press 2.
Download and purchase
items
You can download items such as ringing tones,
images, operator logos, themes, and video clips.
These items can be provided free of charge, or you
can purchase them. Downloaded items are handled
by the respective applications in your device, for
example, a downloaded photo or an .mp3 file can
be saved in Gallery.
Important: Only install and use applications
and other software from trusted sources, such as
applications that are Symbian Signed or have
passed the Java Verified
To download an item, do the following:
1. Select the link.
2. Select the appropriate option to purchase the
item (for example, "Buy").
3. Carefully read all the information provided.
4. To continue or cancel the download, select the
appropriate option (for example, "Accept" or
"Cancel").
When you start a download, a list of ongoing and
completed downloads from the current browsing
session is displayed.
To modify the list, select Options > Downloads.
In the list, scroll to an item, and select Options to
cancel ongoing downloads, or open, save, or delete
completed downloads.
TM
testing.
Bookmarks
The bookmarks view opens when you open the Web
application. You can select web addresses from a list
or from a collection of bookmarks in the Auto.
bookmarks folder. You can also enter the URL
address of the web page you want to visit directly
into the field (
).
Web browser
29
indicates the starting page defined for the
default access point.
You can save URL addresses as bookmarks while
browsing on the internet. You can also save
addresses received in messages to your bookmarks
and send saved bookmarks.
Web browser
To open the bookmarks view while browsing, press
1, or select Options > Bookmarks.
To edit the details of a bookmark, such as the title,
select Options > Bookmark manager > Edit.
In the bookmarks view, you can also open other
browser folders. The Web application allows you to
save web pages during browsing. In the Saved
pages folder, you can view the content of the pages
you have saved offline.
Web also keeps track of the web pages you visit
during browsing. In the Auto. bookmarks folder,
you can view the list of visited web pages.
In Web feeds, you can view saved links to web
feeds and blogs to which you have subscribed. Web
feeds are commonly found on major news
organisation web pages, personal weblogs, online
communities that offer the latest headlines, and
article summaries. Web feeds use RSS and Atom
technologies.
30
Empty the cache
The information or services you have accessed are
stored in the cache memory of the device.
A cache is a memory location that is used to store
data temporarily. If you have tried to access or have
accessed confidential information requiring
passwords, empty the cache after each use. The
information or services you have accessed are
stored in the cache.
To empty the cache, select Options > Clear
privacy data > Clear cache.
End the connection
To end the connection and view the browser page
offline, select Options > Tools > Disconnect; or
to end the connection and close the browser, select
Options > Exit.
To take the browser to the background, press the
end key once. To end the connection, press and hold
the end key.
To delete the information the network server
collects about your visits to various web pages,
select Options > Clear privacy data > Delete
cookies.
Connection security
If the security indicator ( ) is displayed during a
connection, the data transmission between the
device and the internet gateway or server is
encrypted.
The security icon does not indicate that the data
transmission between the gateway and the content
server (or place where the requested resource is
stored) is secure. The service provider secures the
data transmission between the gateway and the
content server.
Security certificates may be required for some
services, such as banking services. You are notified
if the identity of the server is not authentic or if you
do not have the correct security certificate in your
device. For more information, contact your service
provider.
Web settings
Press , and select Web.
Select Options > Settings and from the following:
General settings
● Access point — Change the default access point.
Some or all access points may be preset for your
device by your service provider; you may not be
able to change, create, edit, or remove them.
● Homepage — Define the home page.
● Mini map — Set Mini Map on or off.
pages", p. 28.
● History list — While browsing, to select Back to
see a list of the pages you have visited during the
current browsing session, set History list on.
● Security warnings — Hide or show security
notifications.
● Java/ECMA script — Enable or disable the use of
scripts.
See "Navigate
Page settings
● Load content — Select whether you want to
load images and other objects while browsing. If
you select Text only, to load images or objects
later during browsing, select Options > Tools >
Load images.
● Screen size — Select between full screen and the
normal view with the options list.
● Default encoding — If text characters are not
shown correctly, you can select another encoding
according to language for the current page.
● Block pop-ups — Allow or block automatic
opening of different pop-ups while browsing.
● Automatic reload — If you want the web pages
to be refreshed automatically while browsing,
select On.
● Font size — Define the font size that is used for
web pages.
Privacy settings
Web browser
31
● Auto. bookmarks — Enable or disable
automatic bookmark collecting. If you want to
continue saving the addresses of the visited web
pages into the Auto. bookmarks folder, but hide
the folder from the bookmarks view, select Hide
folder.
● Form data saving — If you do not want the data
Web browser
you enter to different forms on a web page to be
saved and used the next time you open the page,
select Off.
● Cookies — Enable or disable the receiving and
sending of cookies.
Web feed settings
● Automatic updates — Define whether you want
the web feeds to be updated automatically and
how often you want to update them. Setting the
application to retrieve web feeds automatically
may involve the transmission of large amounts
of data through your service provider's network.
Contact your service provider for information
about data transmission charges.
● Acc. point for auto-update — Select the
desired access point for updating. This option is
only available when Automatic updates is on.
32
Connections
Your device offers several options to connect to the
internet or to another compatible device or PC.
Wireless LAN
Your device supports wireless local area network
(WLAN). With WLAN, you can connect your device to
the internet and compatible devices that have
WLAN.
About WLAN
To use WLAN, it must be available in the location,
and your device must be connected to the WLAN.
Some places, like France, have restrictions on the
use of wireless LAN. Check with your local
authorities for more information.
Features that use WLAN, or that are allowed to run
in the background while using other features,
increase the demand on battery power and reduce
the battery life.
Your device supports the following WLAN features:
● IEEE 802.11b/g standard
● Operation at 2.4 GHz
● Wired equivalent privacy (WEP) with keys up to
128 bits, Wi-Fi protected access (WPA), and
802.1x encryption methods. These functions can
be used only if they are supported by the
network.
WLAN connections
To use WLAN, you must create an internet access
point (IAP) for WLAN. Use the access point for
applications that need to connect to the internet.
See "WLAN internet access points", p. 34.
Important: Always enable one of the
available encryption methods to increase the
security of your wireless LAN connection. Using
encryption reduces the risk of unauthorized access
to your data.
A WLAN connection is established when you create
a data connection using a WLAN internet access
point. The active WLAN connection ends when you
end the data connection.
You can use WLAN during a voice call or when packet
data is active. You can only be connected to one
Connections
33
WLAN access point device at a time, but several
applications can use the same internet access point.
When the device is in the offline profile, you can still
use WLAN (if available). Remember to comply with
any applicable safety requirements when
establishing and using a WLAN connection.
Connections
Tip: To check the unique media access control
(MAC) address that identifies your device,
enter *#62209526# in the standby mode.
WLAN wizard
The WLAN wizard helps you to connect to a WLAN
and manage your WLAN connections.
The WLAN wizard shows the status of your WLAN
connections in the active standby mode. To view the
available options, scroll to the row showing the
status, and select it.
If the search finds WLANs, for example, WLAN
network found is displayed, to create an internet
access point (IAP) and start the web browser using
this IAP, select the status and Start Web
browsing.
If you select a secured WLAN network, you are asked
to enter the relevant passcodes. To connect to a
hidden network, you must enter the correct
network name (service set identifier, SSID). To
34
create a new access point for a hidden WLAN, select
New WLAN.
If you are connected to a WLAN, the IAP name is
displayed. To start the web browser using this IAP,
select the status and Continue Web browsing. To
end the connection in the WLAN, select the status
and Disconnect WLAN.
If WLAN scanning is off and you are not connected
to any WLAN, WLAN scanning off is displayed. To
set scanning on and search for available WLANs,
select the status and press the scroll key.
To start a search for available WLANs, select the
status and Search for WLAN. To set WLAN scanning
off, select the status and select WLAN scanning
off.
To access the WLAN wizard application in the menu,
press
, and select Tools > WLAN wiz..
WLAN internet access points
Press , and select Tools > WLAN wiz.
Select Options and from the following:
● Filter WLAN networks — Filter out WLANs in
the list of found networks. The selected networks
are filtered out the next time the application
searches for WLANs.
● Details — View the details of a network shown
in the list. If you select an active connection, the
connection details are displayed.
● Define access point — Cr ea te an in te rn et ac ce s s
point (IAP) in a WLAN.
● Edit access point — Edit the details of an
existing IAP.
You can also use connection manager to create
internet access points.
connections", p. 35.
See "Active data
Operating modes
There are two operating modes in WLAN:
infrastructure and ad hoc.
The infrastructure operating mode allows two
kinds of communication: wireless devices are
connected to each other through a WLAN access
point device, or wireless devices are connected to a
wired LAN through a WLAN access point device.
In the ad hoc operating mode, devices can send and
receive data directly with each other.
Connection manager
Active data connections
Press , and select Tools > Connectivity >
Conn. mgr. > Active data connections.
In the active data connections view, you can see the
open data connections:
data calls
packet data connections
WLAN connections
Note: The actual time invoiced for calls by
your service provider may vary, depending on
network features, rounding off for billing, and so
forth.
To end a connection, select Options >
Disconnect. To close all open connections, select
Options > Disconnect all.
To view the details of a connection, select
Options > Details. The details shown depend on
the connection type.
Available WLAN networks
Press , and select Tools > Connectivity >
Conn. mgr. > Available WLAN networks.
The available WLAN view shows a list of WLANs
within range, their network mode (infrastructure or
ad hoc), and signal strength indicator.
for networks with encryption, and
has an active connection in the network.
To view the details of a network, select Options >
Details.
is shown
if your device
Connections
35
To create an internet access point in a network,
select Options > Define access point.
Bluetooth connectivity
About Bluetooth connectivity
Connections
You can make a wireless connection to other
compatible devices with Bluetooth connectivity.
Compatible devices may include mobile phones,
computers, and enhancements such as headsets
and car kits. You can use Bluetooth connectivity to
send images, video clips, music and sound clips, and
notes; make a wireless connection to your
compatible PC (for example, to transfer files); and
connect to a compatible printer to print images
with Image print.
Since devices with Bluetooth wireless technology
communicate using radio waves, they do not need
to be in direct line-of-sight. However, they must be
within 10 metres (33 feet) of each other, although
the connection may be subject to interference from
obstructions such as walls or from other electronic
devices.
This device is compliant with Bluetooth
Specification 2.0 supporting the following profiles:
Advanced Audio Distribution Profile, Audio/Video
Remote Control Profile, Basic Imaging Profile, Basic
Transfer Profile, Hands-Free Profile, Headset Profile,
Human Interface Device Profile, Object Push Profile,
SIM Access Profile, and Synchronization Profile. To
ensure interoperability between other devices
supporting Bluetooth technology, use Nokia
approved enhancements for this model. Check with
the manufacturers of other devices to determine
their compatibility with this device.
There may be restrictions on using Bluetooth
technology in some locations. Check with your local
authorities or service provider.
Features using Bluetooth technology, or allowing
such features to run in the background while using
other features, increase the demand on battery
power and reduce the battery life.
When the device is locked, you cannot use Bluetooth
connectivity.
See "Phone and SIM", p. 143.
Settings
Press , and select Tools > Bluetooth.
When you open the application for the first time,
you are asked to define a name for your device. You
can change the name later on.
Select from the following:
● Bluetooth — To make a wireless connection to
another compatible device, first set Bluetooth
connectivity On, then establish a connection. To
switch off Bluetooth connectivity, select Off.
● My phone's visibility — To allow your device to
be found by other devices with Bluetooth
wireless technology, select Shown to all. To set
a time after which the visibility is set from shown
to hidden, select Define period. To hide your
device from other devices, select Hidden.
● My phone's name — Edit the name shown to
other devices with Bluetooth wireless
technology.
● Remote SIM mode — To enable another device,
such as a compatible car kit enhancement, to use
the SIM card in your device to connect to the
network, select On.
mode", p. 39.
See "Remote SIM
Security tips
Press , and select Tools > Bluetooth.
When you are not using Bluetooth connectivity, to
control who can find your device and connect to it,
select Bluetooth > Off or My phone's visibility >
Hidden.
Do not pair with or accept connection requests from
an unknown device. This protects your device from
harmful content.
Send data using Bluetooth
connectivity
Several Bluetooth connections can be active at a
time. For example, if you are connected to a
compatible headset, you can also transfer files to
another compatible device at the same time.
1. Open the application where the item you want
to se nd is stored. For e xamp le, t o send an image
to another compatible device, open Gallery.
2. Select the item and Options > Send > Via
Bluetooth.
Devices with Bluetooth wireless technology that
are within range are displayed. Device icons are
as follows:
computer
phone
audio or video device
other device
To interrupt the search, select Stop.
3. Select the device with which you want to
connect.
4. If the other device requires pairing before data
can be transmitted, a tone sounds, and you are
asked to enter a passcode.
devices", p. 38.
See "Pair
Connections
37
When the connection is established, Sending
data is displayed.
Tip: When searching for devices, some
devices may show only the unique address
(device address). To find the unique address
Connections
of your device, enter *#2820# in the standby
mode.
Pair devices
To pair with compatible devices and view your
paired devices, in the main view of Bluetooth
connectivity, scroll right.
Before pairing, create your own passcode (1 to 16
digits), and agree with the owner of the other
device to use the same code. Devices that do not
have a user interface have a factory-set passcode.
The passcode is used only once.
1. To pair with a device, select Options > New
paired device. Devices that are within range are
displayed.
2. Select the device, and enter the passcode. The
same passcode must be entered on the other
device as well.
3. Some audio enhancements connect
automatically to your device after pairing.
Otherwise, scroll to the enhancement, and select
38
Options > Connect to audio device.
Paired devices are indicated by in the device
search.
To set a device as authorised or unauthorised, scroll
to the device, and select from the following options:
● Set as authorized — Connections between your
device and the authorised device can be made
without your knowledge. No separate
acceptance or authorisation is needed. Use this
status for your own devices, such as your
compatible headset or PC or devices that belong
to someone you trust.
devices in the paired devices view.
● Set as unauthorized — Connection requests
from this device must be accepted separately
every time.
To cancel a pairing, scroll to the device, and select
Options > Delete.
If you want to cancel all pairings, select Options >
Delete all.
indicates authorised
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth
connectivity, a tone sounds, and you are asked if
you want to accept the message. If you accept,
is displayed, and the item is placed in the
Inbox folder in Messaging. Messages received
through Bluetooth connectivity are indicated by
.
To leave the remote SIM mode, press the power key,
and select Exit remote SIM mode.
Remote SIM mode
Before the remote SIM mode can be activated, the
two devices must be paired and the pairing initiated
from the other device. When pairing, use a 16-digit
passcode, and set the other device as authorised.
To use the remote SIM mode with a compatible car
kit enhancement, activate Bluetooth connectivity,
and enable the use of the remote SIM mode with
your device. Activate the remote SIM mode from the
other device.
When the remote SIM mode is on in your device,
Remote SIM mode is displayed in the standby
mode. The connection to the wireless network is
turned off, as indicated by
indicator area, and you cannot use SIM card services
or features requiring cellular network coverage.
When the wireless device is in the remote SIM mode,
you can only use a compatible connected
enhancement, such as a car kit, to make or receive
calls. Your wireless device will not make any calls
while in this mode, except to the emergency
numbers programmed into your device. To make
calls from your device, you must leave the remote
SIM mode. If the device is locked, enter the lock code
to unlock it.
in the signal strength
Infrared
With infrared, you can transfer data (such as
business cards, calendar notes, and media files)
with a compatible device.
Do not point the infrared (IR) beam at anyone's eye
or allow it to interfere with other IR devices. This
device is a Class 1 laser product.
To send and receive data using infrared, do the
following:
1. Ensure that the infrared ports of the sending and
receiving devices are pointing at each other, and
that there are no obstructions between the
devices. The distance between the two devices
is not more than 1 meter (3 feet).
2. The user of the receiving device activates the
infrared port.
3. To activate the infrared port of your device to
receive data through infrared, press
select Tools > Connectivity > Infrared.
4. The user of the sending device selects the
desired infrared function to start the data
transfer.
, and
Connections
39
5. To send data using infrared, locate the desired
file in an application or the file manager, and
select Options > Send > Via infrared.
If the data transfer is not started within 1 minute
after the activation of the infrared port, the
connection is cancelled and must be started again.
Connections
Items received using infrared are placed in the
Inbox folder in Messaging. New infrared messages
are indicated by
.
USB
Press , and select Tools > Connectivity >
USB.
To have the device ask the purpose of the
connection each time a compatible data cable is
connected, select Ask on connection > Yes.
If Ask on connection is set to off or you want to
change the mode during an active connection,
select USB mode and from the following:
● PC Suite — Use Nokia PC applications such as
Nokia Nseries PC suite, Nokia Lifeblog, and Nokia
Software Updater.
● Data transfer — Transfer data between your
device and a compatible PC. Use this mode also
for downloading maps with the Nokia Map
40
Loader PC application.
● Image print — Print images on a compatible
printer.
● Media player — Synchronise music with
Windows Media Player.
PC connections
You can use your device with a variety of compatible
PC connectivity and data communications
applications. With Nokia Nseries PC Suite you can,
for example, transfer images between your device
and a compatible PC.
Always create the connection from the PC to
synchronise with your device.
Nokia Wireless Keyboard
To set up a Nokia Wireless Keyboard or other
compatible wireless keyboard supporting the
Bluetooth Human Interface Devices (HID) profile for
use with your device, use the Wireless keyboard
application. The keyboard enables you to enter text
in comfort, using the full QWERTY layout, for text
messages, e-mail, and calendar entries.
1. Activate Bluetooth connectivity on your device.
2. Switch on the keyboard.
3. Press
Wlss. keybd..
, and select Tools > Connectivity >
4. To start searching for devices with Bluetooth
connectivity, select Options > Find keyboard.
5. Select the keyboard from the list, and press the
scroll key to start the connection.
6. To pair the keyboard with your device, enter a
passcode of your choice (1 to 9 digits) on the
device and the same passcode on your keyboard.
To enter the digits of the passcode, you may
need to press the Fn key first.
7. If you are asked for a keyboard layout, select it
from a list on your device.
When the name of the keyboard appears, its status
changes to Keyboard connected, and the green
indicator of your keyboard blinks slowly; the
keyboard is ready for use.
For details on the operation and maintenance of
your keyboard, see its user guide.
Modem
Press , and select Tools > Connectivity >
Modem.
To connect your device as a modem to a compatible
PC using infrared, press the scroll key.
See " Infrared", p. 39.
Connections
41
Nokia Video Centre
With Nokia Video Centre (network service), you can
download and stream video clips over the air from
compatible internet video services using packet
data or WLAN. You can also transfer video clips from
a compatible PC to your device and view them in
Video Centre.
Nokia Video Centre
Video Centre supports the same file formats as
RealPlayer. All videos are played in the landscape
mode by default.
Your device may have predefined services.
Service providers may provide free content or
charge a fee. Check the pricing in the service or from
the service provider.
Find and view videos
1. Press , and select Video center.
2. To connect to a service, scroll left or right, and
select the desired video service.
42
The device updates and displays the content
available in the service.
3. To view videos by categories (if available), scroll
left or right to view the other tabs.
4. To view information about a video, select
Options > Video details.
5. Some video clips can be streamed over the air,
but others must be first downloaded to your
device. To download a video clip, select
Options > Download.
To stream a video clip or view a downloaded clip,
select Options > Play.
6. When the clip is playing, use the media keys to
control the player. To adjust the volume, press
the volume key.
Downloads continue in the background if you exit
the application. The downloaded videos are saved
in Video center > My videos.
To connect to the internet to browse available
services that you can add to the main view, select
Add new services.
Internet videos
Internet videos are video clips distributed in the
internet using RSS-based feeds. You can add new
feeds to Internet videos in the settings.
You can view your feeds in the Internet videos
folder in Video Centre.
To add or delete feeds, select Options > Feed
subscriptions.
To view the videos available in a feed, scroll to it,
and press the scroll key.
To view information about a video, select
Options > Video details.
To download a video, scroll to it, and select
Options > Download.
To play the downloaded video, press the scroll key.
Play downloaded videos
The downloaded videos are saved in Video
center > My videos.
To play a downloaded video, press the scroll key.
To play a downloaded video in the home network,
select Options > Show via home network. Home
network must be configured first.
network", p. 80.
When the clip is playing, use the media keys to
control the player. To adjust the volume, press the
volume key.
If there is not enough free space in the device
memory, the application automatically deletes
some of the oldest videos when new videos are
downloaded.
deleted.
To prevent a video from being automatically
deleted (
indicates videos that may soon be
), select Options > Protect.
See "About home
Transfer videos from your PC
Transfer your own videos to Video Centre from
compatible devices using a compatible USB data
cable.
To transfer videos from a compatible PC, do the
following:
Nokia Video Centre
43
1. To view your device on a PC as a mass memory
device (E:\) where you can transfer any data
files, make the connection with a compatible
USB data cable.
2. Select Data transfer as the connection mode.
3. Select the v ideo s you want to co py fr om yo ur PC .
4. Transfer the videos to E:\My Videos in the mass
memory of your device.
The transferred videos appear in the My
Nokia Video Centre
videos folder in Video Centre. Video files in other
folders of your device are not displayed.
Settings
In the Video Centre main view, select Options >
Settings and from the following:
● Video service selection — Select the video
services you want to appear in the main view of
the application. You can also view the details of
a video service.
Some services require a user name and a
password that you receive from the service
provider.
● Default access points — Select the access
points used for the data connection. Using packet
data access points to download files may involve
44
the transmission of large amounts of data
through your service provider's network. Contact
your service provider for information about data
transmission charges.
● Parental control — Activate the parental lock
for video services.
● Preferred memory — Select whether
downloaded videos are saved in the device
memory or mass memory. If the selected
memory becomes full, the device saves the
content in the other memory, if available. If there
is not enough space in the other memory, the
application automatically deletes some of the
oldest videos.
● Thumbnails — Select whether to view
thumbnail images in video lists.
Music folder
Music player
Warning: Listen to music at a moderate
level. Continuous exposure to high volume may
damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because
the volume may be extremely loud.
Music player supports files formats such as AAC, AAC
+, eAAC+, MP3, and WMA. Music player does not
necessarily support all features of a file format or all
the variations of file formats.
You can also use Music player to listen to podcast
episodes. Podcasting is the method for delivering
audio or video content over the internet using
either RSS or Atom technologies for playback on
mobile devices and PCs.
You can transfer music from other compatible
devices to your device.
device", p. 48.
Play a song or a podcast episode
You may have to refresh the music and podcast
libraries after you have updated the song or podcast
selection in your device. To add all available items
See "Transfer music to your
to the library, in the Music player main view, select
Options > Refresh.
To play a song or a podcast episode, do the
following:
1. Press
2. Select Music or Podcasts.
3. Select categories to
navigate to the song or
podcast episode you want
to hear.
4. To play the selected files,
press
To pause playback, press
to resume, press
To stop playback, press
, and select Music > Music player.
.
;
again.
.
Music folder
45
To fast forward or rewind, press and hold or
.
To go to the next
item, press
To return to the
beginning of the
Music folder
item, press
To skip to the
previous item,
press
within 2 seconds
after a song or podcast has started.
To switch random play (
Options > Shuffle.
To repeat the current item (
to switch repeat off, select Options > Repeat.
If you play podcasts, shuffle and repeat are
automatically switched off.
To adjust the volume, press the volume key.
To modify the tone of the music playback, select
Options > Equalizer.
To modify the balance and stereo image or to
enhance bass, select Options > Audio settings.
To view a visualisation during playback, select
Options > Show visualization.
.
.
again
) on or off, select
), all items (), or
46
To return to the standby mode and leave the player
playing in the background, press the end key, or to
switch to another open application, press and hold
.
To close the player, select Options > Exit.
Music menu
Press , and select Music > Music player >
Music.
The music menu shows the available music. Select
the desired option in the music menu to view all
songs, sorted songs, or playlists.
When the Music player is playing in the background,
to open the Now playing view, press and hold the
multimedia key.
Playlists
Press , and select Music > Music player >
Music.
To view and manage playlists, in the music menu,
select Playlists.
To view details of the playlist, select Options >
Playlist details.
Create a playlist
1. Select Options > Create playlist.
2. Enter a name for the playlist, and select OK.
3. To add songs now, select Yes; or to add the
songs later, select No.
4. If you select Yes, select artists to find the songs
you want to include in the playlist. Press the
scroll key to add items.
To show the song list under an artist title, scroll
right. To hide the song list, scroll left.
5. When you have made your selections, select
Done.
The playlist is saved to the mass memory of your
device.
To add more songs later, when viewing the playlist,
select Options > Add songs.
To add songs, albums, artists, genres, and
composers to a playlist from the different views of
the music menu, select an item and Options > Add
to a playlist > Saved playlist or New playlist.
To remove a song from a playlist, select Options >
Remove. This does not delete the song from the
device; it only removes it from the playlist.
To reorder songs in a playlist, scroll to the song you
want to move, and select Options > Reorder list.
To grab songs and drop them to a new position, use
the scroll key.
Podcasts
Press , and select Music > Music player >
Podcasts.
The podcast menu displays the podcasts available
in the device.
Podcast episodes have three states: never played,
partially played, and completely played. If an
episode is partially played, it plays from the last
playback position the next time it is played. If an
episode is never played or completely played, it
plays from the beginning.
Home network with music player
You can play content stored in your Nokia device
remotely on compatible devices in a home network.
You can also copy files from your Nokia device to
other devices that are connected to the home
network. Home network must be configured first.
See "About home network", p. 80.
Play a song or a podcast remotely
1. Press , and select Music > Music player.
2. Select Music or Podcasts.
3. Select categories to navigate to the song or
podcast episode you want to hear.
4. Select the desired song or podcast and
Options > Play > Via home network.
Music folder
47
5. Select the device in which the file is played.
Copy songs or podcasts wirelessly
To copy or transfer media files from your device to
another compatible device in a home network,
select a file and Options > Move and copy > Copy
to home network or Move to home net.. Content
Music folder
sharing does not have to be switched on in the
home network settings.
define content", p. 82.
See "Set sharing on and
Transfer music to your device
You can transfer music from a compatible PC or
other compatible devices using a compatible USB
data cable or Bluetooth connectivity.
PC requirements for music transfer:
● Microsoft Windows XP operating system (or
later)
● A compatible version of the Windows Media
Player application. You can get more detailed
information about Windows Media Player
compatibility from your device's product pages
on the Nokia website.
● Nokia Nseries PC Suite 1.6 or later
Windows Media Player 10 may cause playback
delays to WMDRM technology protected files after
they have been transferred to your device. Check
48
Microsoft support website for a hotfix to Windows
Media Player 10 or get a newer compatible version
of Windows Media Player.
Transfer music from PC
You can use three different methods to transfer
music:
● To view your device on a PC as a mass memory
device where you can transfer any data files,
make the connection with a compatible USB data
cable or Bluetooth connectivity. If you are using
the USB cable, select Data transfer as the
connection mode.
● To synchronise music with Windows Media
Player, connect the compatible USB data cable
and select Media player as the connection
mode.
● To use Nokia Music Manager in Nokia Nseries PC
Suite, connect the compatible USB data cable and
select PC Suite as the connection mode.
Use Data transfer and Media player modes to
transfer files to the mass memory of your device.
To change the default USB connection mode, press
, and select Tools > Connectivity > USB > USB
mode.
Both Windows Media Player and Nokia Music
Manager in Nokia Nseries PC Suite have been
optimised to transfer music files. For information
about transferring music with Nokia Music
Manager, see the help function on Nokia Nseries PC
Suite or visit the Nokia support pages.
Transfer with Windows Media Player
Music synchronisation functions may vary between
different versions of the Windows Media Player
application. For more information, see the
corresponding Windows Media Player guides and
help.
Manual synchronisation
With manual synchronisation, you can select the
songs and playlists that you want to move, copy, or
remove.
1. After your device is connected with Windows
Media Player, select your device in the
navigation pane on the right, if more than one
device is connected.
2. In the left navigation pane, browse the music
files on your PC which you want to synchronise.
3. Drag and drop songs to the Sync List on the
right.
You can see the amount of available memory in
your device above the Sync List.
4. To remove songs or albums, select an item in the
Sync List, right-click, and select Remove from
list.
5. To start the synchronisation, click Start Sync.
Automatic synchronisation
1. To activate the automatic synchronisation
function in Windows Media Player, click the
Sync tab, select Nokia Handset > Set Up
Sync..., and check the Sync this device
automatically check box.
2. Select the playlists you want to synchronise
automatically in the Available playlists pane,
and click Add.
The selected items are transferred to the
Playlists to sync pane.
3. To finalise the setup for automatic
synchronisation, click Finish.
When the Sync this device automatically check
box is checked and you connect your device to the
PC, the music library in your device is automatically
updated based on the playlists you select for
synchronisation in Windows Media Player. If no
playlists have been selected, the whole PC music
library is selected for synchronisation. If there is not
enough free memory in your device, Windows
Media Player selects manual synchronisation
automatically.
To stop automatic synchronisation, click the Sync
tab, and select Stop Sync to 'Nokia Handset'.
Music folder
49
Nokia Music Store
In the Nokia Music Store (network service) you can
search, browse, and purchase music to download to
your device. To purchase music, you first need to
register for the service.
Music folder
To check the Nokia Music Store availability in your
country, visit music.nokia.com.
To access the Nokia Music Store, you must have a
valid internet access point in the device.
To open Nokia Music Store, press
Music > Music store.
To find more music in different categories of the
music menu, select Options > Find in Music
store.
Nokia Music Store settings
The availability and appearance of the music store
settings may vary. The settings may also be
predefined and not editable. If the settings are not
predefined, you may be asked to select the access
point to use when connecting to the music store. To
select the access point, select Default acc. pt..
In the music store, you may be able to edit the
settings by selecting Options > Settings.
50
, and select
Radio
You can use the radio as a traditional FM radio with
automatic tuning and saved stations or with
parallel visual information related to the radio
programme on the display if you tune to stations
that offer Visual Radio service. The Visual Radio
service uses packet data (network service).
Warning: Listen to music at a moderate
level. Continuous exposure to high volume may
damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because
the volume may be extremely loud.
When you open the radio for the first time, a wizard
helps you to save local radio stations (network
service).
If you do not have access to the Visual Radio service,
the operators and radio stations in your area may
not support Visual Radio.
Listen to the radio
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for
the FM radio to function properly.
Press
, and select Music > Radio.
Note that the quality of the radio broadcast
depends on the coverage of the radio station in that
particular area.
You can normally make a call or answer an incoming
call while listening to the radio. The radio is muted
when there is an active call.
To start a station search, select
change the frequency manually, select Options >
Manual tuning.
If you have previously saved radio stations, to go to
the next or previous saved station, select
.
To adjust the volume, press the volume key.
To listen to the radio using the loudspeaker, select
Options > Activate loudspeaker.
To view available stations based on location, select
Options > Station directory (network service).
To save the current tuned station to your station list,
select Options > Save station. To open the list of
your saved stations, select Options > Stations.
To return to the standby mode and allow the FM
radio to play in the background, select Options >
Play in background.
or . To
or
View visual content
To check availability and costs and to subscribe to
the service, contact your service provider.
To view available visual content for a tuned station,
select
visual service ID has not been saved for the station,
enter it, or select Retrieve to search for it in the
station directory (network service).
When the connection to the visual service is
established, the current visual content is displayed.
or Options > Start visual service. If the
Saved stations
To open the list of your saved stations, select
Options > Stations.
To listen to a saved station, select Options >
Station > Listen. To view available visual content
for a station with Visual Radio service, select
Options > Station > Start visual service.
To change station details, select Options >
Station > Edit.
Settings
Press , and select Music > Radio.
Select Options > Settings and from the following:
● Start-up tone — Select whether a tone is played
when the application is started.
Music folder
51
● Auto-start service — To start Visual Radio
automatically when you select a saved station
that offers Visual Radio service, select Yes.
● Access point — Select the access point used for
the data connection. You do not need an access
point to use the application as an ordinary FM
Music folder
radio.
● Current region — Select the region in which you
are currently located. This setting is displayed
only if there is no network coverage when the
application is started.
Nokia Podcasting
With the Nokia Podcasting application (network
service), you can search, discover, subscribe to, and
download podcasts over the air, and play, manage,
and share audio and video podcasts with your
device.
Warning: Listen to music at a moderate
level. Continuous exposure to high volume may
damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because
the volume may be extremely loud.
Settings
Before using Nokia Podcasting, set your connection
52
and download settings.
The recommended connection method is WLAN.
Check with your service provider for terms and data
service fees before using other connections. For
example, a flat rate data plan can allow large data
transfers for one monthly fee.
Connection settings
To edit the connection settings, press , and select
Music > Podcasting > Options > Settings >
Connection. Define the following:
● Default access point — Select the access point
to define your connection to the internet.
● Search service URL — Define the podcast search
service to be used in searches.
Download settings
To edit the download settings, press , and select
Music > Podcasting > Options > Settings >
Download. Define the following:
● Save to — Define the location where you want
to save your podcasts. For optimal use of storage
space, mass memory is recommended.
● Update interval — Define how often podcasts
are updated.
● Next update date — Define the date of the next
automatic update.
● Next update time — Define the time of next
automatic update.
Automatic updates only occur if a specific default
access point is selected and Nokia Podcasting is
running. If Nokia Podcasting is not running, the
automatic updates are not activated.
● Download limit (%) — Define the size of the
memory that is used for podcast downloads.
● If limit exceeds — Define what to do if the
downloads exceed the download limit.
Setting the application to retrieve podcasts
automatically may involve the transmission of large
amounts of data through your service provider’s
network. Contact your service provider for
information about data transmission charges.
To restore the default settings, select Options >
Restore default in the settings view.
Search
Search helps you to find podcasts by keyword or
title.
The search engine uses the podcast search service
you set up in Podcasting > Options > Settings >
Connection > Search service URL.
To search for podcasts, press
Podcasting > Search, and enter the desired
keywords.
Tip: Search looks for podcast titles and
keywords in descriptions, not specific
episodes. General topics, such as football or
, select Music >
hip-hop, usually give better results than a
specific team or artist.
To subscribe to marked channels and add them to
your podcasts, select Options > Subscribe. You
can also add a podcast by selecting one.
To start a new search, select Options > New
search.
To go the website of the podcast, select Options >
Open web page (network service).
To see the details of a podcast, select Options >
Description.
To send selected podcasts to another compatible
device, select Options > Send.
Directories
Directories help you to find new podcast episodes
to which to subscribe.
To open directories, press
Podcasting > Directories.
Contents of the directories change. Select the
desired directory folder to update it (network
service). When the colour of the folder changes,
press the scroll key again to open it.
Directories can include top podcasts listed by
popularity or themed folders.
, and select Music >
Music folder
53
To open the desired folder topic, press the scroll key.
A list of podcasts is displayed.
To subscribe to a podcast, select the title, and press
the scroll key. After you have subscribed to episodes
of a podcast, you can download, manage, and play
them in the podcasts menu.
Music folder
To add a new directory or folder, select Options >
New > Web directory or Folder. Select a title, URL
of the .opml (outline processor markup language)
file, and Done.
To edit the selected folder, web link, or web
directory, select Options > Edit.
To import an .opml file stored on your device, select
Options > Import OPML file. Select the location of
the file, and import it.
To send a directory folder as a multimedia message
or using Bluetooth connectivity, select the folder
and Options > Send.
When you receive a message with an .opml file
using Bluetooth connectivity, open the file to save
the file into the Received fo ld er in di re ct or ie s. Op en
the folder to subscribe to any of the links to add to
your podcasts.
Downloads
After you have subscribed to a podcast, from
54
directories, search, or by entering a URL, you can
manage, download, and play episodes in
Podcasts.
To see the podcasts you have subscribed to, select
Podcasting > Podcasts.
To see individual episode titles (an episode is a
particular media file of a podcast), select the
podcast title.
To start a download, select the episode title. To
download or to continue to download selected or
marked episodes, select Options > Download or
Continue download. You can download multiple
episodes at the same time.
To play a portion of a podcast during download or
after partial downloading, select the podcast and
Options > Play preview.
Fully downloaded podcasts can be found in the
Podcasts folder, but are not shown until the library
is refreshed.
Play and manage podcasts
To display the available episodes from the selected
podcast, select Options > Open. Under each
episode, you see the file format, the size of the file,
and time of the upload.
When the podcast is fully downloaded, to play the
full episode, select Podcasts > Options > Play, or
press and select Music > Music player >
Podcasts.
To up da te th e sel ec te d p od cast or ma rk ed podcasts,
for a new episode, select Options > Update.
To stop the updating, select Options > Stop
update.
To add a new podcast by entering the URL of the
podcast, select Options > New podcast. If you do
not have an access point defined or if during packet
data connection you are asked to enter a user name
and password, contact your service provider.
To edit the URL of the selected podcast, select
Options > Edit.
To delete a downloaded podcast or marked
podcasts from your device, select Options >
Delete.
To send the selected podcast or marked podcasts to
another compatible device as .opml files as a
multimedia message or by Bluetooth connectivity,
select Options > Send.
To update, delete, and send a group of selected
podcasts at once, select Options > Mark/
Unmark, mark the desired podcasts, and select
Options to choose the desired action.
To open the website of the podcast (network
service), select Options > Open web page.
Some podcasts provide the opportunity to interact
with the creators by commenting and voting. To
connect to the internet to do this, select Options >
View comments.
Music folder
55
Media folder
RealPlayer
Media folder
With RealPlayer, you can play video clips or stream
media files over the air without saving them to the
device first.
RealPlayer supports files with extensions such as .
3gp, .mp4, or .rm. However, RealPlayer does not
necessarily support all file formats or all the
variations of file formats.
When playback is active, in the landscape view, use
the media keys to control the player.
Play video clips
Press , and select Applications > Media >
RealPlayer.
1. To play a saved media file, select Options >
Open and from the following:
● Most recent clips — Play one of the last six
files played in RealPlayer.
● Saved clip — Play a file saved in Gallery.
2. Scroll to a file, and press the scroll key to play the
file.
56
To adjust the volume, use the volume key.
Stream content over the air
Many service providers require you to use an
internet access point (IAP) for your default access
point. Other service providers allow you to use a
WAP access point.
In RealPlayer, you can only open an rtsp:// URL
address. However, RealPlayer plays a .ram file if you
open an http link to it in a browser.
To stream content over the air (network service),
select a streaming link saved in Gallery, on a web
page, or received in a text message or multimedia
message. Before live content begins streaming,
your device connects to the site and starts loading
the content. The content is not saved in your device.
RealPlayer settings
Press , and select Applications > Media >
RealPlayer.
You may receive RealPlayer settings in a special
message from the service provider. For more
information, contact your service provider.
Select Options > Settings and from the following:
● Video — Select whether video clips are
automatically repeated after they finish playing.
● Streaming — Select whether to use a proxy
server, change the default access point, and set
the port range used when connecting. Contact
your service provider for the correct settings.
Adobe Flash Player
Press , and select Applications > Media >
Flash Player.
Use Adobe Flash Player to view, play, and interact
with compatible flash files made for mobile devices.
To open a flash file, scroll to it, and select it.
Nokia Lifeblog
Press , and select Applications > Media >
Lifeblog.
About Nokia Lifeblog
Lifeblog is a combination of software for mobile
phone and PC that keeps a multimedia diary of the
items that you collect with your device. Lifeblog
organises your photos, videos, sounds, text
messages, multimedia messages, and weblog posts
into a chronology that you can browse, search,
share, publish, and back up. Both Nokia Lifeblog PC
and Nokia Lifeblog mobile let you send or blog your
items for others to see.
Lifeblog mobile automatically keeps track of your
multimedia items. Use Lifeblog on your device to
browse your items, send them to others, or publish
them on the web. Connect your device to a
compatible PC using a compatible USB data cable or
Bluetooth connectivity to transfer and synchronise
the items on the device with your compatible PC.
Lifeblog PC provides easy browsing and searching
of the items that you collected with your device.
With one-button transfer using a compatible USB
data cable or Bluetooth connectivity, your favourite
photos, videos, text, and multimedia messages are
transferred back to your device.
For safekeeping, you can back up your Nokia
Lifeblog database using the hard disk of your
compatible PC, CDs, DVDs, removable drive, or
network drive. Additionally, you can post items to
your weblog (blog).
For more information on weblog services and their
compatibility with Nokia Lifeblog, visit
www.nokia.com/lifeblog, or press F1 in the Nokia
Lifeblog PC application to open the Nokia Lifeblog
help.
Media folder
57
Installation on your PC
Before you install Nokia Lifeblog on a compatible
PC, you need the following:
● 1 GHz Intel Pentium or equivalent, 128 MB RAM
● 400 MB of available hard disk space (if Microsoft
Media folder
DirectX and Nokia Nseries PC Suite must be
installed)
● Graphics capability of 1024x768 and 24-bit
colour
● 32 MB graphics card
● Microsoft Windows 2000 or Windows XP
To install Nokia Lifeblog on your PC, do the
following:
1. Insert the CD-ROM or DVD-ROM supplied with
your device.
2. Install Nokia Nseries PC Suite (includes Nokia
connectivity cable drivers for USB connection).
3. Install Nokia Lifeblog for PC.
If Microsoft DirectX 9.0 is not already installed on
your PC, it is installed at the same time with Nokia
Lifeblog for PC.
Connect your device and PC
To connect your device and a compatible PC using a
USB data cable, do the following:
58
1. Ensure that you have installed Nokia Nseries PC
Suite.
2. Connect the USB data cable to the device and the
PC.
The USB mode should be PC Suite.
"USB", p. 40. When you connect your device to
the PC for the first time after you have installed
Nokia Nseries PC Suite, the PC installs the specific
driver for your device. This may take a while.
3. Start the Nokia Lifeblog PC application.
To connect your device and a compatible PC using
Bluetooth wireless technology, do the following:
1. Ensure that you have installed Nokia Nseries PC
Suite on your PC.
2. Ensure that you have paired your d ev ice and the
PC through Bluetooth connectivity with GetConnected in Nokia Nseries PC Suite.
3. Activate Bluetooth connectivity on your device
and on your PC.
See "Settings", p. 36.
See
Copy items
To copy new or edited items from your device to
your PC, and copy the selected items from your PC
to your device:
1. Connect your device to the PC.
2. Start the Nokia Lifeblog application on your PC.
3. In the Nokia Lifeblog PC application, select File
> Copy from Phone and to Phone.
The new items from your device are copied to
your PC. The items on the To Phone tab on your
PC are copied to your device.
Browse time line and favourites
Press , and select Applications > Media >
Lifeblog.
When you start Nokia Lifeblog on your device, the
time line view opens and shows your multimedia
items.
To open your saved favourites, select Options >
View Favorites.
When you start Nokia Lifeblog on your PC, you have
several ways to move around in the time line and
favourites views. The fastest way is to move the
slider handle forward or backward. Alternatively,
click the time bar to select a date, use the 'Go to
date' feature, or use the arrow keys.
Post to web
Press , and select Applications > Media >
Lifeblog.
To share your best Nokia Lifeblog items, send them
to your weblog on the internet for others to see.
You must first create an account with a weblog
service, create one or more weblogs that you use as
the destination of your posts, and add the weblog
account to Nokia Lifeblog. The recommended
weblog service for Nokia Lifeblog is TypePad from
Six Apart, www.typepad.com.
On your device, to add the weblog account in Nokia
Lifeblog, select Options > Settings > Blog. On
your PC, to edit accounts, select File > Blog Account
Manager....
Post items to the web from your device
1. In Timeline or Favorites, select the items that
you want to post to the web.
2. Select Options > Post to Web.
If you use the feature for the first time, Nokia
Lifeblog retrieves a weblog list from the weblog
server.
The weblog post dialogue opens.
3. S ele ct the we blog yo u wa nt to u se from th e Post
to: list. If you have created new weblogs, to
update the weblog list, select Options >
Refresh blog list.
4. Enter a title and a caption for the post. You can
also write a longer story or description in the
body text field.
5. When everything is ready, select Options >
Send.
Media folder
59
Post items to the web from your PC
1. In the time line or favourites, select the items (a
maximum of 50) that you want to post to the
web.
2. Select File > Post to the Web....
3. Enter a title and a caption for the post. You can
Media folder
also write a longer story or description in the
body text field.
4. Select the weblog that you want to use from the
Post to: list.
5. When everything is ready, click Send.
Import items
In addition to the .jpg images of your device, you
can also import .jpg images and .3gp and .mp4
video clips, .amr sound files, and .txt text files from
other sources (such as a compatible CD or DVD, or
folders on the hard disk of your compatible PC) into
Nokia Lifeblog.
To impor t image s or vi deo s from a compa tible PC to
Nokia Lifeblog for PC, do the following:
1. In the time line or favourites view, select File >
Import from PC....
2. Browse the list to find the image or video file, or
sound or text file from the list, or navigate to
60
other folders to find the file that you want to
import. Use the Look in list to browse other
drives or appliances.
3. Select a folder, file, or several files. You can view
their content in the preview pane.
4. To import the folder (including subfolders) or
the selected files, click Open.
Activation keys
To view the digital rights activation keys stored in
your device, press
Media > Actv. keys.
Digital rights management
Content owners may use different types of digital
rights management (DRM) technologies to protect
their intellectual property, including copyrights.
This device uses various types of DRM software to
access DRM-protected content. With this device you
can access content protected with WMDRM 10, OMA
DRM 1.0, and OMA DRM 2.0. If certain DRM software
fails to protect the content, content owners ma y ask
that such DRM software's ability to access new DRMprotected content be revoked. Revocation may also
prevent renewal of such DRM-protected content
already in your device. Revocation of such DRM
software does not affect the use of content
protected with other types of DRM or the use of nonDRM-protected content.
, and select Applications >
Digital rights management (DRM) protected content
comes with an associated activation key that
defines your rights to use the content.
If your device has OMA DRM protected content, to
back up both the activation keys and the content,
use the backup feature of Nokia PC Suite. Other
transfer methods may not transfer the activation
keys which need to be restored with the content for
you to be able to continue the use of OMA DRM
protected content after the device memory is
formatted. You may also need to restore the
activation keys in case the files on your device get
corrupted.
If your device has WMDRM protected content, both
the activation keys and the content will be lost if the
device memory is formatted. You may also lose the
activation keys and the content in case the files on
your device get corrupted. Losing the activation
keys or the content may limit your ability to use the
same content on your device again. For more
information, contact your service provider.
Some activation keys may be connected to a specific
SIM card, and the protected content can be accessed
only if the SIM card is inserted in the device.
In the activation keys main view, select from the
following:
● Valid keys — View keys that are connected to
one or more media files and keys whose validity
period has not started yet.
● Invalid keys — Vie w keys that are not val id; t he
time period for using the media file is exceeded
or there is a protected media file in the device
but no connected activation key.
● Not in use — V iew ke ys that have n o me dia fi les
connected to them in the device.
To buy more u sag e time or exte nd the u sage p eriod
for a media file, select an invalid activation key and
Options > Get new key. Activation keys cannot be
updated if web service message reception is
disabled.
settings", p. 112.
To view detailed information, such as the validity
status and ability to send the file, scroll to an
activation key, and press the scroll key.
See "Web service message
Recorder
Press , and select Applications > Media >
Recorder.
With Recorder, you can record voice memos and
telephone conversations.
To record a telephone conversation, open Recorder
during a voice call. Both parties hear a tone every 5
seconds during recording.
Media folder
61
Camera
Camera
To activate the main camera, press and hold the
capture key, or press
Camera.
To close the main camera, press Exit.
About the camera
Your Nokia N95 8GB has two cameras, a highresolution camera on the back of the device (the
main camera, up to 5 megapixels, in landscape
mode) and a lower resolution camera on the front
(the secondary camera in portrait mode). You can
use both cameras to take still pictures and record
videos.
Your device supports an image capture resolution
of 2592x1944 pixels. The image resolution in this
guide may appear different.
The images and video clips are automatically saved
in Images & videos in Gallery. The cameras
produce .jpeg images. Video clips are recorded in
the MPEG-4 file format with the .mp4 file extension,
or in the 3GPP file format with the .3gp file
extension (sharing quality).
62
settings", p. 72.
, and select Applications >
See "Video
You can send images and video clips in a multimedia
message, as an e-mail attachment, or by using other
connection methods, such as Bluetooth
connectivity or wireless LAN connection. You can
also upload them to a compatible online album.
"Share images and videos online", p. 80.
To optimise the size of the image or video clip for
sending, select the proper image or video quality
from the camera settings. Check the size limits of
MMS and e-mail messages with your service
provider.
See
Image capture
To activate the main camera, press and hold the
capture key, or press
Camera.
Still image camera indicators
The still image camera viewfinder displays the
following:
, and select Applications >
1 — Capture mode indicator
2 — Active toolbar. The toolbar is not displayed
Large, Print 3M - Medium, Print 2M - Medium, Email 0.8M - Med., or MMS 0.3M - Small. The quality
of a digitally zoomed picture is lower than that of
an unzoomed picture.
5 — Image counter, which displays the estimated
number of images you can capture using the current
image quality setting and memory in use. The
counter is not displayed during image capture.
6 — The device memory (
indicators, which show where images are saved
See "Active
) and mass memory ( )
Active toolbar
The active toolbar provides you with shortcuts to
different items and settings before and after taking
a picture or recording a video. Scroll to items, and
select them by pressing the scroll key. You can also
define when the active toolbar is visible on the
display.
The settings in the active toolbar return to the
default settings after you close the camera.
To view the active toolbar before and after taking a
picture or recording a video, select Options >
Show icons. To view the active toolbar only when
you need it, select Options > Hide icons. Only the
capture mode and battery level indicators are
shown on the display. To activate the active toolbar,
press the scroll key. The toolbar is visible for 5
seconds.
Before taking a picture or recording a video, in the
active toolbar, select from the following:
to switch between the video and image modes
to select the scene
to select the flash mode (images only)
to activate the self-timer (images only). See "You
in the picture—self-timer", p. 67.
to activate the sequence mode (images only).
See "Take pictures in a sequence", p. 66.
Camera
63
to select a colour effect
to show or hide the viewfinder grid (images
only)
Camera
to adjust white balance
to adjust the exposure compensation (images
only)
to adjust sharpness (images only)
to adjust contrast (images only)
to adjust light sensitivity (images only)
The icons change to reflect the current status of the
setting.
The available options vary depending on the
capture mode and view you are in.
a picture", p. 65.See "After recording a
video", p. 69. The active toolbar in Gallery has
different options.
See "Active toolbar", p. 74.
See "After taking
Take pictures
Before taking a picture, note the following:
● To make lighting and colour adjustment s, use the
scroll key to scroll through the active toolbar.
"Setup settings—adjust colour and
lighting", p. 71. Saving the captured image may
take longer if you change the zoom, lighting, or
64
colour settings.
● To free memory for new pictures, transfer files to
a compatible PC using a compatible USB data
cable, for example, and delete the files from your
device. The device informs you when the
memory is full, and asks whether you want to
change the memory in use.
When taking a picture, note the following:
● Use both hands to keep the camera still.
● The quality of a digitally zoomed picture is lower
than that of a nonzoomed picture.
● The camera goes into the battery saving mode if
there are no keypresses for a moment. To
continue taking pictures, press the capture key.
To take a picture, do the following:
1. If the camera is in the video mode, select the
image mode from the active toolbar.
See
2. To lock the focus on an
object, press the capture
key halfway down (main
camera only, not
available in landscape
and sports scenes). The
green locked focus
indicator appears on the
display. If the focus was
not locked, the red focus
indicator appears. Release the capture key, and
press it halfway down again. You can, however,
take the picture without locking the focus.
3. To take a picture, press the capture key. Do not
move the device before the image is saved.
To zoom in or out when taking a picture, use the
zoom key in your device.
Tip: To open Gallery and view the pictures you
have taken, press
device twice.
To activate the front camera, select Options > Use
secondary camera. To take a picture, press the
scroll key. To zoom in or out, scroll up or down.
To leave the camera open in the background and
use other applications, press
camera, press and hold the capture key.
on the side of your
. To return to the
After taking a picture
Select the following from the active toolbar
(available only if you select Show captured
image > On in the still image camera settings):
● If you do not want to keep the image, select
Delete (
● To send the image using a multimedia message,
e-mail, or other connection methods, such as
Bluetooth connectivity, press the call key, or
select Send (
messages", p. 103. This option is not available
during an active call.
You can also send the image to a call recipient
during an active call. Select Send to caller (
(only available during an active call).
● To tag images to the print basket for later
printing, select Add to Print basket (
● To send the image to a compatible online album,
select
account for a compatible online album).
"Share images and videos online", p. 80.
To zoom in an image after taking it, press
open the image in Gallery, and select the zooming
option from the options list.
To use the image as wallpaper in the active standby,
select Options > Set as wallpaper.
).
). See "Write and send
).
(available only if you have set up an
See
to
Camera
)
65
To set the image as a call image for a contact, select
Options > Set as contact call img. > Assign to
contact.
Camera
To return to the viewfinder to capture a new image,
press the capture key.
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not
use the flash on people or animals at close range.
Do not cover the flash while taking a picture.
The camera of your device has an LED flash for low
light conditions. The following flash modes are
available for the still image camera: Automatic
(
), Red-eye ( ), On ( ), and Off ( ).
To change the flash mode, in the active toolbar,
select the desired flash mode.
Scenes
Scenes are only available in the main camera.
A scene helps you to find the right colour and
lighting settings for the current environment. The
settings of each scene have been set according to a
certain style or environment.
The default scene in the image mode is Auto, and
in the video mode Automatic (both indicated with
66
).
To change the scene, in the active toolbar, select
Scene modes and a scene.
To make your own scene suitable for a certain
environment, scroll to User defined, and select
Options > Change. In the user defined scene you
can adjust different lighting and colour settings. To
copy the s ettings of another scene, select Based on
scene mode and the desired scene. To save the
changes and return to the scenes list, press Back.
To activate your own scene, scroll to User
defined, press the scroll key, and select Select.
Take pictures in a sequence
The sequence mode is available only in the main
camera.
To set the camera to take six pictures or the desired
number of pictures in sequence (if enough memory
is available), in the active toolbar, select Sequence
mode.
To take six pictures, select Burst. To capture the
pictures, press the capture key.
To take two or more pictures in a sequence, select
the desired time interval. To capture pictures using
the selected time interval, press the capture key. To
stop taking pictures, select Cancel. The number of
pictures taken depends on the available memory.
After you take the pictures in the burst mode, they
a re sh ow n i n a gr id on th e d is pl ay . T o v ie w a pi ct ur e,
press the scroll key to open it. If you used a time
interval, only the last taken picture is shown on the
display. You can view the other pictures in Images
& videos in Gallery.
You can also use the sequence mode with the selftimer.
To return to the sequence mode viewfinder, press
the capture key.
To switch off the sequence mode, in the active
toolbar, select Sequence mode > Single shot.
You in the picture—self-timer
The self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you
can include yourself in the picture.
To set the self-timer delay, in the active toolbar,
select Self timer > 2 seconds, 10 seconds, or 20
seconds.
To activate the self-timer, select Activate. The
device beeps when the timer is running and the
quadrangle blinks just before the image capture.
The camera takes the picture after the selected
delay elapses.
To switch off the self-timer, in the active toolbar,
select Self timer > Off.
Tip: In the active toolbar, select Self timer >
2 seconds to keep your hand steady when
taking a picture.
Tips on taking good photographs
Picture quality
Use the appropriate picture quality. The camera has
several picture quality modes. Use the highest
setting to make sure that the camera produces the
best picture quality available. Note however, that
better picture quality requires more storage space.
For multimedia message (MMS) and e-mail
attachments it may be necessary to use the smallest
picture quality mode optimised for MMS sending.
You can define the quality in the camera settings.
See "Still image camera settings", p. 70.
Background
Use a simple background. For portraits and other
pictures with people, avoid having your subject in
front of a cluttered, complex background that may
distract attention from the subject. Move the
camera, or the subject, when these conditions
cannot be met. Move the camera closer to the object
to take clearer portraits.
Depth
When shooting landscapes and sceneries, add
depth to your pictures by placing objects in the
Camera
67
foreground. If the foreground object is too close to
the camera, it may be blurred.
Lighting conditions
Camera
Changing the source, amount, and direction of light
can change photographs dramatically. Here are
some typical lighting conditions:
● Light source behind the subject. Avoid placing
your subject in front of a strong light source. If
the light source is behind the subject or visible in
the display, the resulting picture may have weak
contrast, may be too dark, and may contain
unwanted light effects.
● Sidelit subject. Strong side light gives a dramatic
effect but may be too harsh, resulting in too
much contrast.
● Light source in front of the subject. Harsh
sunlight may cause the subjects to squint their
eyes. The contrast may also be too high.
● Optimal lighting is found in situations where
there is plenty of diffused, soft light available, for
example, on a bright, partially cloudy day or on
a sunny day in the shadow of trees.
Video recording
To activate the main camera, press and hold the
capture key, or press
68
Camera.
, and select Applications >
Video capture indicators
The video viewfinder displays the following:
1 — Capture mode indicator
2 — Audio mute on indicator
3 — Active toolbar. The toolbar is not displayed
during recording.
4 — The battery charge level indicator
5 — Video quality indicator that indicates whether
the quality of the video is TV high quality, TV
normal quality, E-mail high quality, E-mail
norm. quality, or Sharing quality
6 — The video clip file type
7 — Total available video recording time. When you
are recording, the current video length indicator
also shows the elapsed time and time remaining.
8 — The device memory (
indicators that show where videos are saved
See "Active toolbar", p. 63.
) and mass memory ( )
9 — The video stabilisation is turned on ( ). See
"Video settings", p. 72.
To display all viewfinder indicators, select
Options > Show icons. Select Hide icons to
display only the video status indicators, and during
the recording, the available record time, zoom bar
when zooming, and the selection keys.
Record videos
Before recording a video, note the following:
● To make lighting and colour adjustments, scroll
through the active toolbar.
adjust colour and lighting", p. 71.See
"Scenes", p. 66.
● To free memory for new video clips, transfer files
to a compatible PC using a compatible USB data
cable, for example, and remove the files from
your device. The device informs you when the
memory is full, and asks whether you want to
change the memory in use.
To record a video, do the following:
1. If the camera is in the image mode, select the
video mode from the active toolbar.
2. To start recording, press the capture key. The red
record icon (
indicating that recording has started.
) is shown and a tone sounds,
See "Setup settings—
3. To pause recording at any time, press Pause.
Video recording automatically stops if recording
is set to pause and there are no keypresses
within a minute. Select Continue to resume
recording.
To zoom in or out of the subject, use the zoom
key in your device.
4. To stop recording, select Stop. The video clip is
automatically saved to the Images & videos
folder of Gallery. The maximum length of the
video clip depends on the available memory.
To activate the front camera, select Options > Use
secondary camera. To start recording a video,
press the scroll key. To zoom in or out, scroll up or
down.
After recording a video
After you record a video clip, select the following
from the active toolbar (available only if Show
captured video is set to On in the video settings):
● To immediately play the video clip you just
recorded, select Play (
● If you do not want to keep the video, select
Delete (
● To send the video clip using a multimedia
message, e-mail, or other connection methods,
such as Bluetooth connectivity, press the call key,
).
).
Camera
69
or select Send ( ). See "Write and send
messages", p. 103.See "Send data using
Bluetooth connectivity", p. 37. This option is not
available during an active call. You may not be
Camera
able to send video clips saved in the .mp4 file
format in a multimedia message.
You can also send the video clip to a call recipient
during an active call. Select Send to caller (
(only available during an active call).
● To upload the video clip to a compatible online
album, select
an account for a compatible online album).
"Share images and videos online", p. 80.
● To return to the viewfinder to record a new video
clip, press the capture key.
(only available if you have set up
Camera settings
There are two kinds of settings for the camera:
setup settings and main settings. The setup settings
return to the default settings after you close the
camera, but the main settings remain the same
until you change them again. To adjust the setup
settings, use the options in the active toolbar.
"Setup settings—adjust colour and
lighting", p. 71. To change the main settings, in
the image or video mode, select Options >
Settings.
70
Still image camera settings
To change the main settings, in the image mode,
select Options > Settings and from the following:
● Image quality — Select Print 5M - Large
(2592x1944 resolution), Print 3M - Medium
(2048x1536 resolution), Print 2M - Medium
(1600x1200 resolution), E-mail 0.8M - Med.
)
(1024x768 resolution), or MMS 0.3M - Small
(640x480 resolution). The better the image
quality, the more memory the image consumes.
See
See
If you want to print the image, select Print 5M -
Large, Print 3M - Medium, or Print 2M Medium. If you want to send it using e-mail,
select E-mail 0.8M - Med.. To send the image
using a multimedia message, select MMS 0.3M -
Small.
These resolutions are only available in the main
camera.
● Add to album — Select whether you want to
save the image to a certain album in Gallery. If
you select Yes, a list of available albums opens.
● Show captured image — Select On if you want
to see the captured image after it is taken or
Off if you want to continue taking pictures
immediately.
● Default image name — Define the default
name for the captured images.
● Extended digital zoom (main camera only)
— On (continuous) allows the zoom increments
to be smooth and continuous between digital
and extended digital zoom, On (paused) allows
the zoom increments to pause at the digital and
extended digital step point, and Off allows a
limited amount of zoom while retaining the
image resolution.
● Capture tone — Select the tone you want to
hear when you take a picture.
● Memory in use — Select where you want to
store your images.
● Rotate image — Select whether you want
images that are captured when the device is held
upright to be rotated when you open them in
Gallery.
● Restore camera settings — S el ec t Yes to return
the default values to the camera settings.
Setup settings—adjust colour and
lighting
To enable the camera to reproduce colours and
lighting more accurately or to add effects to your
pictures or videos, scroll through the active toolbar,
and select from the following options:
● Flash mode (
desired flash mode.
) (images only) — Select the
● Color tone ( ) — Select a colour effect from the
list.
● White balance (
lighting condition from the list. This allows the
camera to reproduce colours more accurately.
● Exposure compensation (
you are shooting a dark subject against a very
light background, such as snow, adjust the
exposure to +1 or +2 to compensate the
background brightness. For light subjects
against a dark background, use -1 or -2.
● Sharpness (
sharpness of the image.
● Contrast (
difference between the lightest and darkest
parts of the image.
● Light sensitivity (
the light sensitivity in low light conditions to
decrease the risk of images that are too dark.
The screen display changes to match any settings
you make so that you see how the change affects
the pictures or videos.
The available settings vary depending on the
selected camera.
The setup settings are camera specific; if you
change the settings in the secondary camera, the
settings in the main camera do not change. The
setup settings are also shooting mode specific; if
you change the settings in the image mode, the
) — Select the current
) (images only) — If
) (images only) — Adjust the
) (images only) — Adjust the
) (images only) — Increase
Camera
71
settings in the video mode do not change.
Switching between the modes does not reset the
defined setup settings.
The setup settings return to the default settings
Camera
when you close the camera.
If you select a new scene, the colour and lighting
settings are replaced by the selected scene. You can
change the setup settings after selecting a scene if
needed.
Video settings
To change the main settings, in the video mode,
select Options > Settings and from the following:
● Video quality — Set the quality of the video clip
to TV high quality, TV normal quality, E-mail
high quality, E-mail norm. quality (standard
quality for playback through your handset), or
Sharing quality. If you want to view the video
on a compatible TV or PC, select TV high
quality or TV normal quality, which have VGA
resolution (640x480) and the .mp4 file format.
You may not be able to send video clips saved in
the .m p4 fi le fo rma t i n a mu lt imedia messag e. To
send the video clip using a multimedia message,
select Sharing quality, which has QCIF
resolution and the .3gp file format.
● Video stabilization — Select On to reduce
72
camera shaking when recording the video.
● Audio recording — Select Mute if you do not
want to record sound.
● Add to album — Select whether you want to
add the recorded video clip to a certain album in
Gallery. Select Yes to open a list of available
albums.
● Show captured video — Select whether you
want the first frame of the recorded video clip to
be displayed after the recording stops. Select
Play from the active toolbar (main camera) or
Options > Play (secondary camera) to view the
video clip.
● Default video name — Define the default name
for the captured video clips.
● Memory in use — Select where you want to
store your videos.
● Restore camera settings — Select Yes to return
the default values to the camera settings.
Gallery
To store and organise your images, video clips,
sound clips, and streaming links, or share your files
with other compatible Universal Plug and Play
(UPnP) devices through wireless LAN (WLAN), press
, and select Gallery.
Tip: If you are in another application, to view
the last saved picture in Gallery, press
on the side of your device. To enter the
Images & videos folder main view, pres s the
review key again.
View and organise files
Press , and select Gallery.
In Gallery, select Images & videos
Sound clips
Presentations
key to open it.
, Streaming links,
, or All files , and press the scroll
, Tracks ,
You can browse and open
folders; and mark, copy,
and move items to folders.
You can also create albums
and mark, copy, and add
items to albums.
"Albums", p. 75.
To open a file, press the
scroll key. Video clips, .ram
files, and streaming links
open and play in
RealPlayer, and music and
sound clips in Music player.
", p. 56.See "Music player", p. 45.
See
See "RealPlayer
Images and video clips
View images and videos
To view your images and video clips, press , and
select Gallery > Images & videos.
Pictures taken and video clips recorded with the
camera of your device are stored in Images &
videos. Images and video clips can also be sent to
you in a multimedia message, as an e-mail
Gallery
73
attachment, or through Bluetooth connectivity or
infrared. To be able to view a received image or
video clip in Gallery or in the RealPlayer, you must
first save it.
Gallery
The video clips saved in Nokia Video Centre are not
shown in Images & videos in Gallery.
Video Centre", p. 42.
The images and
video clip files in
Images & videos
are in a loop and
ordered by date
and time. The
number of files is
displayed. To
browse the files
one by one, scroll left or right. To browse files in
groups, scroll up or down.
To open a file, press the scroll key. When an image
is opened, to zoom in the image, press the zoom
key on the side of your device. The zooming ratio is
not stored permanently.
If you want the display to be automatically rotated
based on the orientation of the device, set the
display rotation on in the settings.
"Personalisation settings", p. 141.
To edit a video clip or a photo, select Options >
74
See "Edit images", p. 76.
Edit.
See
See "Nokia
To pri nt yo ur i mag es on a compatible printer, select
Options > Print.
can also tag images for later printing to the print
basket in Gallery.
See "Image print", p. 79. You
See "Print basket", p. 75.
Organise images and videos
To add an image or a video clip to an album in
Gallery, select Options > Albums > Add to
album.
See "Albums", p. 75.
To tag an image for later printing, select the image
and Add to Print basket from the active toolbar.
See "Print basket", p. 75.
To use the picture as a background image, select the
picture and Options > Use image > Set as
wallpaper.
To delete an image or video clip, select Options >
Delete.
Some of the options may also be available through
the active toolbar (available when you open an
image or a video clip).
toolbar", p. 74.
See "Active
Active toolbar
In the Images & videos folder, you can use the
active toolbar as a shortcut to different tasks. The
active toolbar is available only when you have
selected an image or a video clip.
In the active toolbar, scroll up or down to different
items, and select them by pressing the scroll key.
The available options vary depending on the view
you are in and whether you have selected an image
or a video clip.
The settings in the active toolbar return to the
default settings after you close the camera.
If you want the active toolbar to always be visible
on the display, select Options > Show icons.
To view the active toolbar only when you need it,
select Options > Hide icons. To activate the active
toolbar, press the scroll key.
Select from the following:
to play the selected video clip
to send the selected image or video clip
to upload the selected image or video clip to a
compatible online album (only available if you have
set up an account for a compatible online album).
See "Share images and videos online", p. 80.
or to add or remove an image from the print
See "Print basket", p. 75.
basket.
to print the viewed image
to start a slide show of your images
to delete the selected image or video clip
The available options may vary depending on the
view you are in.
Albums
With albums, you can conveniently manage your
images and video clips. To view the albums list in
Gallery, select Images & videos > Options >
Albums > View albums.
To create a new album, in the albums list view,
select Options > New album.
To add a picture or a video clip to an album in
Gallery, scroll to a picture or video clip, and select
Options > Albums > Add to album. A list of
albums opens. Select the album to which you want
to add the picture or video clip. The item you added
to the album is still visible in Images & videos in
Gallery.
To remove a file from an album, open the album,
scroll to the file, and press C. The file is not deleted
from Images & videos in Gallery.
Print basket
You can tag images to the print basket, and print
them later with a compatible printer or in a
compatible printing kiosk, if available.
print", p. 79. The tagged images are indicated
with
in Images & videos and albums.
To tag an image for later printing, select an image,
and Add to Print basket from the active toolbar.
See "Image
Gallery
75
To view the images in the print basket, select
from Images & videos (available only when you
have added pictures to the print basket), or
Gallery
Options > Print > View Print basket.
To remove an image from the print basket, select
an image in Images & videos or in an album, and
Options > Remove from basket.
Slide show
To view your images as a slide show, select an
image in Gallery, and Start slide show (
active toolbar. The slide show starts from the
selected file.
To view only the selected images as a slide show,
select Options > Mark/Unmark > Mark to mark
images, and Options > Slide show > Start to
start the slide show.
Select from the following:
● Pause — to pause the slide show
● Continue — to resume the slide show, if paused
● End — to close the slide show
To browse the images, scroll left or right.
Before starting the slide show, adjust the slide show
settings. Select Options > Slide show >
Settings, and from the following:
● Music — to add sound to the slide show. Select
76
On or Off.
● Song — to select a music file from the list
● Delay between slides — to adjust the tempo
of the slide show
● Zoom and pan — to make the slide show move
smoothly from one slide to another, and let
Gallery randomly zoom in and out in the images
To decrease or increase the volume during the slide
show, use the volume key in your device.
Edit images
) in the
Image editor
To edit the pictures after taking them or the ones
already saved in Gallery, select Options > Edit. The
image editor opens.
Select Options > Apply effect to open a grid
where you can select different edit options
indicated by small icons. You can crop and rotate
the image; adjust the brightness, colour, contrast,
and resolution; and add effects, text, clip art, or a
frame to the picture.
Crop image
To crop an image, select Options > Apply
effect > Crop, and a predefined aspect ratio from
the list. To crop the image size manually, select
Manual.
If you select Manual, a cross appears in the upper
left corner of the image. Use the scroll key to select
the area to crop, and select Set. Another cross
appears in the lower right corner. Again select the
ar ea t o be c rop ped . To a djus t th e fi rst s ele cted are a,
select Back. The selected areas form a rectangle
that forms the cropped image.
If you select a predefined aspect ratio, select the
upper left corner of the area to be cropped. To resize
the highlighted area, use the scroll key. To freeze
the selected area, press the scroll key. To move the
area within the picture, use the scroll key. To select
the area to be cropped, press the scroll key.
Reduce red-eye
To reduce red-eye in an image, select Options >
Apply effect > Red eye reduction.
Move the cross onto the eye, and press the scroll key.
A loop appears on the display. To resize the loop to
fit the size of the eye, use the scroll key. To reduce
the redness, press the scroll key. When you finish
editing the image, press Done.
To save the changes, and return to Images &
videos, press Back.
Useful shortcuts
You can use the following shortcuts when editing
images:
● To view a full-screen image, press *. To return to
the normal view, press * again.
● To rotate an image clockwise or
counterclockwise, press 3 or 1.
● To zoom in or out, press 5 or 0.
● To move on a zoomed image, scroll up, down,
left, or right.
Edit videos
To edit video clips in Gallery, scroll to a video clip,
and select Options > Edit and an editing option.
The video editor supports .3gp and .mp4 video file
formats, and .aac, .amr, .mp3, and .wav audio file
formats. It does not necessarily support all features
of a file format or all the variations of file formats.
TV-out mode
To view the captured images and video clips on a
compatible TV, use a Nokia Video Connectivity Cable.
Before viewing the images and video clips on TV,
you may need to configure the TV-out settings for
the applicable TV system and TV aspect ratio.
"Enhancement settings", p. 142.
To watch images and video clips on TV, do the
following:
See
Gallery
77
1. Connect a Nokia Video Connectivity Cable to the
video input of a compatible TV.
2. Connect the other end of the Nokia Video
Gallery
Connectivity Cable to the Nokia AV Connector of
your device.
3. You may need to select the cable mode.
4. Press
videos and the file you want to view.
The images are
shown in the
image viewer,
and the video
clips are played
in RealPlayer.
All audio,
including the
active calls, stereo video clip sound, key tone, and
ringing tone is routed to the TV when the Nokia
Video Connectivity Cable is connected to the device.
You can use the device microphone normally.
For all applications other than the Images &
videos folder in Gallery and RealPlayer, the TV
screen displays what is displayed on the screen of
your device.
The opened image is displayed in full-screen on the
TV. When you open an image in the thumbnail view
while it is viewed on the TV, zooming in is not
78
available.
, and select Gallery > Images &
When you open a highlighted video clip, RealPlayer
starts playing the video clip on the device display
and the TV screen.
You can view images as a slide show on TV. All items
in an album or marked images are displayed on the
TV in full-screen while the selected music plays.
"Slide show", p. 76.
See "RealPlayer ", p. 56.
See
Presentations
With presentations, you can view SVG (scalable
vector graphics) files, such as cartoons and maps.
SVG images maintain their appearance when
printed or viewed with different screen sizes and
resolutions.
To view SVG files, press
Presentations. Scroll to an image, and select
Options > Play. To pause playing, select
Options > Pause.
To zoom in, press 5. To zoom out, press 0.
To rotate the image 90 degrees clockwise or
counterclockwise, press 1 or 3, respectively. To
rotate the image 45 degrees, press 7 or 9.
To switch between full and normal screen, press *.
, and select Gallery >
Print images
Image print
To print images with Image print, select the image
you want to print, and the print option in Gallery,
camera, image editor, or image viewer.
Use Image print to print your images using a
compatible USB data cable, or Bluetooth
connectivity. You can also print images using
wireless LAN.
You can only print images that are in .jpeg format.
The pictures taken with the camera are
automatically saved in .jpeg format.
Printer selection
To print images with Image print, select the image
you want to print, and the print option in Gallery,
camera, image editor, or image viewer.
When you use Image print for the first time, a list of
available compatible printers is displayed after you
select the image. Select a printer. The printer is set
as the default printer.
To print to a printer compatible with PictBridge,
connect the compatible data cable before you select
the print option, and check that the data cable mode
is set to Image print or Ask on connection.
"USB", p. 40. The printer is automatically displayed
when you select the print option.
See
If the default printer is not available, a list of
available printing devices is displayed.
To change the default printer, select Options >
Settings > Default printer.
Print preview
After you select the printer, the selected images are
displayed using predefined layouts.
To change the layout, scroll left or right to browse
through the available layouts for the selected
printer. If the images do not fit on a single page,
scroll up or down to display the additional pages.
Print settings
The available options vary depending on the
capabilities of the printing device you selected.
To set a default printer, select Options > Default
printer.
To select the paper size, select Paper size, the size
of paper from the list, and OK. Select Cancel to
return to the previous view.
Print online
With Print online, you can order prints of images
on li ne d ir ect ly to y ou r ho me or t o a stor e w her e y ou
can pick them up. You can also order different
products with the selected image, such as mugs or
Gallery
79
mouse pads. The available products depend on the
service provider.
To use Print online, you must have at least one
Gallery
printing service configuration file installed. The files
can be obtained from printing service providers that
support Print online.
For more information on the application, see the
guides available at the Nokia product support pages
or your local Nokia website.
Share images and videos
online
You can share images and video clips in compatible
online albums, weblogs, or in other compatible
online sharing services on the web. You can upload
content, save unfinished posts as drafts and
continue later, and view the content of the albums.
The supported content types may vary depending
on the service provider.
Before sharing images and videos online, you must
subscribe to the service with an online image
sharing service provider, and create a new account.
You can usually subscribe to the service on the web
page of the service provider. Contact your service
provider for details on subscribing to the service.
To upload a file from Gallery to the online service,
80
press
, and select Gallery > Images & videos.
Scroll to the desired file, and select Options >
Send > Post to web, or select the file and
the active toolbar.
For more information on the application and
compatible service providers, see the Nokia product
support pages or your local Nokia website.
from
Home network
About home network
Your device is compatible with Universal Plug and
Play architecture (UPnP). Using a wireless LAN
(WLAN) access point device or a WLAN router, you
can create a home network and connect compatible
UPnP devices that support WLAN to the network,
such as your device, a compatible PC, a compatible
printer, and a compatible sound system or TV, or a
sound system or TV equipped with a compatible
wireless multimedia receiver.
To use the WLAN function of your device in a home
network, you must have a working WLAN home
connection setup and have other UPnP enabled
home devices to connect to the same home
network.
The home network uses the security settings of the
WLAN connection. Use the home network feature in
a WLAN infrastructure network with a WLAN access
point device and encryption enabled.
See "Wireless LAN", p. 33.
You can share media files saved in Gallery with other
compatible UPnP devices using the home network.
To manage your home network settings, press
and select Tools > Connectivity > Home
media. You can also use the home network to view,
play, copy, or print compatible media files from
Gallery.
See "View and share media files", p. 82.
Your device is connected to the home network only
if you accept a connection request from another
compatible device, or in Gallery, select the option to
view, play, print, or copy media files on your device
or search for other devices in the Home network
folder.
Important security information
When you configure your WLAN home network,
enable an encryption method on your access point
device, then on the other devices you intend to
connect to your home network. Refer to the
documentation of the devices. Keep any passcodes
secret and in a safe place separate from the devices.
You can view or change the settings of the WLAN
internet access point in your device.
points", p. 149.
If you use the ad hoc operating mode to create a
home network with a compatible device, enable
one of the encryption methods in WLAN security
mode when you configure the internet access
point.
See "Connection settings", p. 148. This step
See "Access
reduces the risk of an unwanted party joining the
ad hoc network.
,
Your device notifies you if another device attempts
to connect to it and the home network. Do not
accept connection requests from an unknown
device.
If you use WLAN in a network that does not have
encryption, switch off sharing your files with other
devices, or do not share any private media files.
"Settings for home network", p. 81.
Settings for home network
To share media files saved in Gallery with other
compatible UPnP devices through WLAN, you must
create and configure your WLAN home internet
access point, then configure the settings for home
network in the Home media application.
"WLAN internet access points", p. 34.See
"Connection settings", p. 148.
The options related to home network are not
available in applications before the settings in the
Home media application have been configured.
When you access the Home media application for
the first time, the setup wizard opens and helps you
define the home network settings for your device.
To use the setup wizard later, in the Home media
main view, select Options > Run wizard, and
follow the instructions on the display.
Gallery
See
See
81
To connect a compatible PC to the home network,
on the PC, you must install the related software. You
get the software from the CD-ROM or DVD-ROM
supplied with your device, or you can download it
Gallery
from the device support pages on the Nokia
website.
Configure settings
To configure the settings for home network, select
Tools > Connectivity > Home media >
Settings and from the following:
● Home access point — Select Always ask if you
want the device to ask for the home access point
every time you connect to the home network,
Create new to define a new access point that is
used automatically when you use the home
network, or None. If your home network does
not have WLAN security settings enabled, you get
a security warning. You can continue and switch
the WLAN security on later; or cancel defining the
access point and first switch on the WLAN
security.
● Device name — Enter a name for your device
that is shown to the other compatible devices in
the home network.
● Copy to — Select the memory where you want
to save copied media files.
See "Access points", p. 149.
82
Set sharing on and define content
Select Tools > Connectivity > Home media >
Share content and from the following:
● Content sharing — Allow or deny sharing media
files with compatible devices. Do not set content
sharing on before you have configured all the
other settings. If you set content sharing on, the
other UPnP compatible devices in the home
network can view and copy your files you have
selected for sharing in the Images & videos
folder. If you do not want the other devices to
access your files, set content sharing off.
● Images & video — Select media files for sharing
with other devices, or view the sharing status of
images and videos. To update the content of the
folder, select Options > Refresh content.
● Music — Select playlists for sharing with other
devices, or view the sharing content of playlists.
To update the content of the folder, select
Options > Refresh content.
View and share media files
To share your media files with other UPnP
compatible devices in the home network, set
content sharing on.
content", p. 82. If content sharing is off in your
device, you can still view and copy the media files
See "Set sharing on and define
stored in another home network device if it is
allowed by the other device.
Show media files stored in your device
To show your images, videos, and sound clips in
another home network device, such as a compatible
TV, do the following:
1. In Gallery, select an image, video clip, or sound
clip, and Options > Show via home
network.
2. Select a compatible device in which the media
file is shown. The images are shown both in the
other home network device and your device, and
the video clips and sound clips are played only
in the other device.
3. To stop sharing, select Options > Stop
showing.
Show media files stored in the other device
To show media files that are stored on another
home network device in your device (or in a
compatible TV, for example), do the following:
1. Press
Home media > Browse home. Your device
starts the search of other compatible devices.
Device names start to appear on the display.
2. Select a device from the list.
, and select Tools > Connectivity >
3. Select the type of media you want to view from
the other device. The available file types depend
on the features of the other device.
To search files with different criteria, select
Options > Find. To sort the found files, select
Options > Sort by.
4. Select the media file or folder you want to view.
5. Press the scroll key, and select Play or Show, and
On device or Via home network.
6. Select the device in which the file is shown.
To adjust the volume when playing a video or sound
clip, scroll left or right.
To stop sharing the media file, select Back or Stop
(available when playing videos and music).
Tip: You can print images saved in Gallery
through a home network with a UPnP
compatible printer.
Content sharing does not have to be switched
on.
See "Image print", p. 79.
Copy media files
To copy or transfer media files from your device to
another compatible device, such as a UPnP
compatible PC, select a file in Gallery and Options >
Move and copy > Copy to home network or
Move to home net.. Content sharing does not have
to be switched on.
Gallery
83
To copy or transfer files from the other device to
your device, select a file in the other device and the
desired copying option from the options list.
Content sharing does not have to be switched on.
Gallery
84
Positioning (GPS)
About GPS
The Global Positioning System (GPS) is a worldwide
radio navigation system that includes 24 satellites
and their ground stations that monitor the
operation of the satellites. Your device has an
internal GPS receiver.
A GPS terminal receives low-power radio signals
from the satellites and measures the travel time of
the signals. From the travel time, the GPS receiver
can calculate its location to the accuracy of meters.
The coordinates in the GPS are expressed in degrees
and decimal degrees format using the international
WGS-84 coordinate system.
The Global Positioning System (GPS) is operated by
the government of the United States, which is solely
responsible for its accuracy and maintenance. The
accuracy of location data can be affected by
adjustments to GPS satellites made by the United
States government and is subject to change with
the United States Department of Defense civil GPS
policy and the Federal Radionavigation Plan.
Accuracy can also be affected by poor satellite
geometry. Availability and quality of GPS signals
may be affected by your location, buildings, natural
obstacles, and weather conditions. The GPS receiver
should only be used outdoors to allow reception of
GPS signals.
Any GPS should not be used for precise location
measurement, and you should never rely solely on
location data from the GPS receiver and cellular
radio networks for positioning or navigation.
Your device also supports Assisted GPS (A-GPS).
Assisted GPS (A-GPS) is used to retrieve assistance
data over a packet data connection, which assists in
calculating the coordinates of your current location
when your device is receiving signals from
satellites.
A-GPS is a network service.
Your device is preconfigured to use the Nokia A-GPS
service, if no service provider specific A-GPS settings
are available. The assistance data is retrieved from
the Nokia A-GPS service server only when needed.
You must have a packet data internet access point
defined in the device to retrieve assistance data
from the Nokia A-GPS service. To define an access
point for A-GPS, press
Settings > General > Positioning >
Positioning server > Access point. A wireless LAN
, and select Tools >
Positioning (GPS)
85
access point cannot be used for this service. The
packet data internet access point is asked when GPS
is used for the first time in your device.
To enable or disable different positioning methods,
such as Bluetooth GPS, press
Settings > General > Positioning >
Positioning methods.
Positioning (GPS)
GPS receiver
The GPS receiver is located in the bottom of the
device. When using the receiver, slide the numeric
keypad open, and from an upright position, move
the device to an angle of about 45 degrees, with an
unobstructed view of the sky. Do not cover the
numeric keypad with your hand.
Establishing a GPS
connection may take
from a couple of
seconds to several
minutes. Establishing
a GPS connection in
the car may take
longer.
The GPS receiver
draws its power from the device battery. Using the
GPS receiver may drain the battery faster.
, and select Tools >
86
About satellite signals
If your device cannot find the satellite signal,
consider the following:
● If you are indoors, go outdoors to receive a better
signal.
● If the numeric keypad slide is closed, open it.
● If you are outdoors, move to a more open space.
● Ensure that
your hand does
not cover the
GPS antenna of
your device.
See "GPS
receiver"
, p. 86.
● If the weather
conditions are bad, the signal strength may be
affected.
● If the power saver turns on while the device is
attempting to establish a GPS connection, the
attempt is interrupted.
● Establishing a GPS connection may take from a
couple of seconds to several minutes.
Satellite status
To check how many satellites your device has found,
and whether your device is receiving satellite
signals, press , and select Tools >
Connectivity > GPS data > Position >
Options > Satellite status. Or, in the Maps
application, select Options > Map options >
Satellite info.
If your device has found
satellites, a bar for each
satellite is shown in the
satellite info view. The
longer the bar, the
stronger the satellite
signal. When your device
has received enough data
from the satellite signal to
calculate the coordinates
of your location, the bar
turns black.
Initially your device must
receive signals from at
least four satellites to be
able to calculate the
coordinates of your
location. When the initial
calculation has been made,
it may be possible to
continue calculating the
coordinates of your location with three satellites.
However, the accuracy is generally better when
more satellites are found.
Position requests
You may receive a request from a network service
to receive your position information. Service
providers may offer information about local topics,
such as weather or traffic conditions, based on the
location of your device.
When you receive a position request, a message is
displayed showing the service that is making the
request. Select Accept to allow your position
information to be sent or Reject to deny the
request.
Maps
About Maps
Press , and select Maps.
With Maps, you can see your current location on the
map, browse maps for different cities and countries,
search for addresses and different points of interest,
plan routes from one location to another, and save
locations as landmarks and send them to
compatible devices.
You can also purchase extra services, such as guides
and a turn-by-turn navigation service with voice
guidance.
Maps uses GPS. You can define the positioning
methods used with your device in the device
Positioning (GPS)
87
settings. See "Positioning settings", p. 145. For the
most accurate location information, use either the
internal GPS or a compatible external GPS receiver.
When you use Maps for the first time, you may need
to define an internet access point for downloading
map information for your current location. To
change the default access point later, select
Almost all digital cartography is inaccurate and
incomplete to some extent. Never rely solely on the
cartography provided for use in this device.
Downloading maps may involve the transmission of
large amounts of data through your service
provider's network. Contact your service provider
for information about data transmission charges.
Tip: You can also download maps by using a
wireless LAN connection or through the
internet using Nokia Map Loader PC software.
See "Download maps", p. 89.
To receive a note when your device registers to a
network outside your home cellular network, select
Options > Settings > Network > Roaming
warning > On. Contact your network service
provider for details and roaming costs.
Browse maps
The map coverage varies by country.
When you open the Maps application, Maps zooms
in to the location that was saved from your last
session. If no position was saved from the last
session, the Maps application zooms in to the
capital city of the country you are in based on the
information the device receives from the cellular
network. At the same time, the map of the location
is downloaded, if it has not been downloaded
during previous sessions.
To establish a GPS connection and zoom in to your
current location, select Options > Find place >
GPS position [0], or press 0
A GPS indicator
you browse maps. When the device tries to
establish a GPS connection, the circles are yellow.
When the device receives enough data from the
satellites to calculate the coordinates of your
current location, the circles turn green.
To view information about satellites when you are
using Maps, select Options > Map options >
Satellite info.
Your current location is indicated on the map with
.
is shown on the display when
88
To move on the map, scroll
up, down, left, or right.
To zoom in or out, press *
or #.
To switch between the 2D
and 3D views, select
Options > Map
options > 2D/3D.
To find a location, select
Options > Find place.
You can choose to go to
your GPS position, find an address, find a point of
interest by entering a keyword, find locations
nearby, or browse a guide (extra service).
To use a location on the map, for example, as a
starting point for a nearby search, to plan a route,
view its details, or start navigation (extra service),
press the scroll key, and select the desired option.
When you browse the map on the display, for
example, move to another country, a new map is
downloaded automatically. These downloaded
maps are free of charge, but downloading may
involve the transmission of large amounts of data
through your service provider's network. For more
information on data transmission charges, contact
your service provider.
The maps are automatically saved in the device
memory.
To define what kinds of points of interest are shown
on the map, select Options > Map options >
Categories and the desired categories.
To save a location as a landmark, in the desired
location, press the scroll key, select Save > As
landmark, enter a name for the landmark, and
select the categories you want to include it in. To
take a screen shot of your location, select Save >
As image. The screen shot is saved in Gallery. To
send the screen shot, in Gallery, select the screen
shot, and
To view saved landmarks, select Options > Find
place > Landmark.
To send a landmark to a compatible device, in the
landmarks view, press the scroll key, and select
Send. If you send the landmark in a text message,
the information is converted to plain text.
To adjust the network, routing, and general
settings, select Options > Settings.
from the active toolbar.
Download maps
When you browse the map on the display, for
example, move to another country, a new map is
downloaded automatically. These downloaded
maps are free of charge, but downloading may
Positioning (GPS)
89
involve transmission of large amounts of data
through your service provider's network. For more
information on data transmission charges, contact
your service provider.
You can view the amount of transferred data from
the data counter (kB) shown on the display. The
counter shows the amount of network traffic when
you browse maps, create routes, or search for
locations online.
Positioning (GPS)
To prevent the device from automatically
downloading maps through the internet, for
example, when you are outside your home cellular
network, select Options > Settings > Network >
Use network > Never.
To define how much of the mass memory you want
to use for saving maps data or voice guidance files,
select Options > Settings > Network > Max.
mass mem. use (%). When the memory is full, the
oldest map data is deleted. The saved maps data can
be deleted using Nokia Map Loader PC software.
Nokia Map Loader
No kia Map Loa der is PC so ftware that y ou can u se to
download and install maps for different countries
to your device from the internet. You can also use it
to download voice files for turn-by-turn navigation.
To use Nokia Map Loader, you must first install it to
a compatible PC. You can download the PC software
90
from the internet at www.nokia.com/maps. Follow
the instructions on the screen.
You must use the Maps application before using
Nokia Map Loader. Nokia Map Loader uses the Maps
history information to check the version of map
data to be downloaded.
After you have installed the PC software to your PC,
to download maps, do the following:
1. Connect your device to the PC by using a
compatible USB data cable. Select Data
transfer as the USB connection mode.
2. Open Nokia Map Loader in your PC. Nokia Map
Loader checks the version of map data to be
downloaded.
3. Select the maps or voice guidance files you want,
and download and install them to your device.
Find a place
To view points of interest near your current location
or other locations on the map, select Options >
Find place > Nearby and a category.
To search for a point of interest by name, select
Options > Find place > Keyword search or start
entering the first letters of the name, and select
Find.
To search for a location by address, select
Options > Find place > By address. You must
enter the city and country. To use an address you
have saved to a contact card in Contacts, select
Options > Find place > By address > Options >
Select from contacts.
To view a search result on the map, press the scroll
key, and select Show on map. To return to the
results list, select Back.
To view a list of your previous locations, select
Options > Find place > Recent.
Plan a route
To plan a route from one location to another (for
example, from your home to your office), do the
following:
1. Scroll to a point on the map, press the scroll key,
and select Route from.
2. Scroll to From, and select Options > Select and
the desired option.
To adjust the routing settings, such as the mode
of transportation, select Options > Settings >
Routing.
3. To select the destination, scroll to To, and select
Options > Select and the desired option.
4. To view the route itinerary, select Options >
Show route. The route is calculated using the
selected routing settings.
To view the itinerary route on the map, select
Options > Show on map.
To run a simulation of the route, select Options >
Start simulation.
Tip: You can also use a compatible GPS
receiver with Bluetooth connectivity with
Maps. For example, in a car, an external GPS
receiver can be positioned so that it has a
clear view of the sky. Enable the use of an
external GPS receiver in positioning settings.
See "Positioning settings", p. 145.
Extra services for Maps
You can purchase and download different kinds of
guides, such as city and travel guides, for different
cities to your device. You can also purchase a turnby-turn navigation service with voice guidance to
use it in Maps.
The downloaded guides are automatically saved to
your device.
The licence you purchase for a guide or navigation
is device-specific and cannot be transferred from
your device to another device.
Navigation
To purchase a navigation service with voice
guidance to use in Maps, select Options > Extra
services > Add navigation.
Positioning (GPS)
91
After purchasing the navigation upgrade, the
service is available through Maps.
After creating a route in Maps, to start navigation to
the desired destination with GPS using voice
guidance, select Options > Start navigation.
"Plan a route", p. 91. You can also start navigation
by selecting any location on the map or in a results
list, and Navigate to.
When you use navigation for the first time, you are
Positioning (GPS)
prompted to select the language of the voice
guidance and download the voice guidance files of
the selected language. You can also download voice
guidance files using Nokia Map Loader.
"Download maps", p. 89. To change the language
later, in the Maps main view, select Options >
Settings > General > Voice guidance and a
language, and download the voice guidance files
for the selected language.
To discard the created route and use another route,
select Options > Alternative route.
To view only the next turns and hide the map, select
Options > Map options > Arrow mode.
To stop navigation, select Options > Stop
navigation.
Guides
To purchase and download different kinds of
92
guides, such as city and travel guides, for different
See
cities to your device, select Options > Extra
services > Guides.
The guides provide information about attractions,
restaurants, hotels, and other points of interest. The
guides must be downloaded and purchased before
See
use.
To browse a downloaded guide, on the My guides
tab in Guides, select a guide and a subcategory (if
available).
To download a new guide to your device, in Guides,
scroll right to the Nearest guides or All guides tab,
select the desired guide, and press Yes. The
purchase process starts automatically. You can pay
for the guides through a credit card or have the
amount charged to your phone bill (if supported by
your cellular network service provider).
To confirm the purchase, select OK twice. To receive
a confirmation of the purchase through e-mail,
enter your name and e-mail address, and select
OK.
Landmarks
Press , and select Tools > Connectivity >
Landmarks.
With Landmarks, you can save the position
information of specific locations in your device. You
can sort the saved locations into different
categories, such as business, and add other
information to them, such as addresses. You can use
your saved landmarks in compatible applications,
such as GPS data and Maps.
GPS coordinates are expressed in degrees and
decimal degrees format using the international
WGS-84 coordinate system.
To create a new landmark, select Options > New
landmark. To make a positioning request for your
current location, select Current position. To enter
the position information manually, select Enter
manually.
To edit or add information to a saved landmark (for
example, a street address), scroll to a landmark, and
select Options > Edit. Scroll to the desired field,
and enter the information.
To view the landmark on the map, select Options >
Show on map. To create a route to the location,
select Options > Navigate using map.
You can sort your landmarks into preset categories,
and create new categories. To edit and create new
landmark categories, scroll right in Landmarks, and
select Options > Edit categories.
To add a landmark to a category, scroll to the
landmark in Landmarks, and select Options > Add
to category. Scroll to each category to which you
want to add the landmark, and select it.
To send one or several landmarks to a compatible
device, select Options > Send. Your received
landmarks are placed in the Inbox folder in
Messaging.
GPS data
GPS data is designed to provide route guidance
information to a selected destination, position
information about your current location, and
traveling information, such as the approximate
distance to the destination and approximate
duration of travel.
Press
data.
The coordinates in the GPS are expressed in degrees
and decimal degrees format using the international
WGS-84 coordinate system.
To use GPS data, the GPS receiver of your device
must initially receive position information from at
least four satellites to calculate the coordinates of
your location. When the initial calculation has been
made, it may be possible to continue calculating the
coordinates of your location with three satellites.
However, the accuracy is generally better when
more satellites are found.
, and select Tools > Connectivity > GPS
Positioning (GPS)
93
Route guidance
Press , and select Tools > Connectivity > GPS
data > Navigation.
Start the route guidance outdoors. If started
indoors, the GPS receiver may not receive the
necessary information from the satellites.
Route guidance uses a rotating compass on the
device display. A red ball shows the direction to the
Positioning (GPS)
destination, and the approximate distance to it is
shown inside the compass ring.
Route guidance is designed to show the straightest
route and the shortest distance to the destination,
measured in a straight line. Any obstacles on the
route, such as buildings and natural obstacles, are
ignored. Differences in altitude are not taken into
account when calculating the distance. Route
guidance is active only when you move.
To set your trip destination, select Options > Set
destination and a landmark as the destination, or
enter the latitude and longitude coordinates. Select
Stop navigation to clear the destination set for
your trip.
Retrieve position information
Press , and select Tools > Connectivity > GPS
data > Position.
94
In the position view, you can view the position
information of your current location. An estimate of
the accuracy of the location is displayed.
To save your current location as a landmark, select
Options > Save position. Landmarks are saved
locations with more information, and they can be
used in other compatible applications and
transferred between compatible devices.
Trip meter
Press , and select Tools > Connectivity > GPS
data > Trip distance.
Select Options > Start to activate trip distance
calculation, and Stop to deactivate it. The
calculated values remain on the display. Use this
feature outdoors to receive a better GPS signal.
Select Reset to set the trip distance and time and
average and maximum speeds to zero, and to start
a new calculation. Select Restart to set the
odometer and total time to zero.
The trip meter has limited accuracy, and rounding
errors may occur. Accuracy can also be affected by
availability and quality of GPS signals.
Personalise your device
You can personalise your device by changing the
standby mode, main menu, tones, themes, or font
size. Most of the personalisation options, such as
changing the font size, can be accessed through the
device settings.
settings", p. 141.
See "Personalisation
Themes
Press , and select Tools > Settings >
General > Personalization > Themes.
You can change the look of the display, such as the
wallpaper and icons.
To change the theme that is used for all the
applications in your device, select General.
To preview a theme before activating it, select
Options > Preview. To activate the theme, select
Options > Set. The active theme is indicated by
.
The themes in the mass memory of your device are
indicated by
T o c h an g e t h e l a yo u t o f th e ma i n m e nu , se l ec t Menu
view.
.
To open a browser connection and download more
themes, in General or Menu view, select
Download themes (network service).
Important: Use only services that you trust
and that offer adequate security and protection
against harmful software.
To edit the wallpaper and power saver of the
current theme that appear in the standby mode,
select Wallpaper to change the background image
or Power saver to change the power saver.
Profiles—set tones
Press , and select Tools > Profiles.
You can set and customise the ringing tones,
message alert tones, and other tones for different
events, environments, or caller groups.
To change the profile, select a profile, and
Options > Activate. To also change the profile,
press the power key in the standby mode. Scroll to
the profile you want to activate, and select OK.
Personalise your device
95
Tip: To switch between the general and silent
profiles in the standby mode, press and hold
#.
To modify a profile, scroll to the profile, and select
Options > Customize. Scroll to the setting you
want to change, and press the scroll key to open the
choices. Tones stored in the mass memory of your
device are indicated with
In the tones list, select Download sounds (network
service) to open a list of bookmarks. You can select
a bookmark and start connection to a web page to
download more tones.
Personalise your device
If you want the caller’s name to be spoken when
your device rings, select Options > Customize,
and set Say caller's name to On. The caller’s name
must be saved in Contacts.
To create a new profile, select Options > Create
new.
.
3-D tones
Press , select Tools > Utilities > 3-D tones.
With 3-D tones, you can enable three-dimensional
sound effects for ringing tones. Not all ringing tones
support 3-D effects.
96
To enable the 3-D effects, select 3-D ringing tone
effects > On. To change the ringing tone, select
Ringing tone and the desired ringing tone.
To change the 3-D effect that is applied to the
ringing tone, select Sound trajectory and the
desired effect.
To modify the effect, select from the following
settings:
● Trajectory speed — Scroll left or right to adjust
the speed at which sound moves from one
direction to another. This setting is not available
for all ringing tones.
● Reverberation — Select the type of echo.
● Doppler effect — Select On to have the ringing
tone sound louder when you are closer to your
device, and softer when you are farther away.
When you get closer to the device, the ringing
tone appears to become louder, and softer when
you move away from it. This setting is not
available for all ringing tones.
To listen to the ringing tone with the 3-D effect,
select Options > Play tone. If you enable the 3-D
tones but do not select any 3-D effect, stereo
widening is applied to the ringing tone.
To adjust the ringing tone volume, select Tools >
Profiles > Options > Customize > Ringing
volume.
Modify the standby mode
To switch the active standby on or off, press , and
select Tools > Settings > General >
Personalization > Standby mode > Active
standby. The active standby display shows
application shortcuts, and
events from applications
such as calendar and
player.
To change the selection
key shortcuts or the
default shortcut icons in
the active standby mode,
select Tools > Settings >
General >
Personalization >
Standby mode. Some
shortcuts may be fixed, and you cannot change
them.
To change the clock shown in the standby mode,
press
Options > Settings > Clock type.
You can also change the standby mode background
image or what is shown in the power saver.
"Themes", p. 95.
, and select Applications > Clock >
See
Modify the main menu
To change the main menu view, in the main menu,
select Options > Change Menu view > Grid or
List.
To rearrange the main menu, in the main menu,
select Options > Move, Move to folder, or New
folder. You can move less used applications into
folders and place applications that you use more
often into the main menu.
To use animated icons in your device, in the main
menu, select Options > Icon animation > On.
Personalise your device
97
Time management
Clock
Alarm clock
Press , and select Applications > Clock.
To set a new quick alarm, select Options > New
Time management
quick alarm. Quick alarms are set for the next 24
hours and they cannot be repeated.
To view your active and inactive alarms, scroll right
to the alarm tab. To set a new alarm, select
Options > New alarm. Define the repetition, if
needed. When an alarm is active,
To turn off the sounding alarm, select Stop. To stop
the alarm for 5 minutes, select Snooze.
If the alarm time is reached while the device is
switched off, the device switches itself on and starts
sounding the alarm tone. If you select Stop, the
device asks whether you want to activate the device
for calls. Select No to switch off the device or Yes to
make and receive calls. Do not select Yes when
wireless phone use may cause interference or
danger.
To cancel an alarm, select Options > Remove
98
alarm.
is shown.
To change the time, date, and clock type settings,
select Options > Settings.
To allow the mobile phone network to update the
time, date, and time zone information to your
device (network service), in the settings, select
Network operator time > Auto-update.
World clock
Press , and select Applications > Clock.
To open the world clock view, scroll right to the
world clock tab. In the world clock view, you can
view the time in different cities. To add cities to the
list, select Options > Add city. You can add a
maximum of 15 cities to the list.
To set your current city, scroll to a city, and select
Options > Set as current city. The city is displayed
in the clock main view, and the time in your device
is changed according to the city selected. Ensure
that the time is correct and matches your time zone.
Calendar
Create a calendar entry
Press , and select Applications > Calendar.
1. To add a new calendar
entry, scroll to the
desired date, and select
Options > New
entry and one of the
following:
● Meeting — to
remind you of an
appointment that
has a specific date
and time
● Memo — to write a
general entry for a day
● Anniversary — to remind you of birthdays or
special dates (entries are repeated annually)
● To-do — t o re min d you of a t ask tha t mu st be
done by a specific date
2. Fill in the fields. To set an alarm, select Alarm >
On, and enter the alarm time and date.
To add a description for an entry, select
Options > Add description.
3. To save the entry, select Done.
Tip: In the day, week, or month calendar
view, press any key (1-0). An appointment
entry opens, and the characters you enter are
added to the subject field. In the to-do view,
a to-do note entry opens.
When the calendar alarm sounds for a note, select
Silence to turn off the calendar alarm tone. The
reminder text stays on the screen. To stop the
calendar alarm, select Stop. To set the alarm to
snooze, select Snooze.
Calendar views
To change the starting day of the week or the view
that is shown when you open the calendar, select
Options > Settings.
To go to a certain date, select Options > Go to
date. To jump to today, press #.
To switch between the month view, week view, day
view, and to-do view, press *.
To send a calendar note to a compatible device,
select Options > Send.
If the other device is not compatible with
Coordinated Universal Time (UTC), the time
information of received calendar entries may not be
displayed correctly.
Time management
99
To modify the calendar, select Options >
Settings > Calendar alarm tone, Default view,
Week starts on, or Week view title.
Manage calendar entries
To delete several events at a time, go to the month
view, and select Options > Delete entry > Before
date or All entries.
To mark a task as completed, scroll to it in the to-do
Time management
view, and select Options > Mark as done.
You can synchronise your calendar with a
compatible PC using Nokia Nseries PC Suite. When
creating a calendar entry, set the desired
synchronisation option.
100
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.