Nokia, Nokia Connecting People, Eseries, and Nokia E75 are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of
Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia
is prohibited.
Hereby, NOKIA CORPORATION declares that this RM-412 product is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://
www.nokia.com/phones/declaration_of_conformity/.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which
has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in
connection with MPEG-4 video provid ed by a licensed video provider. No license is granted or shall be implied for any other use. Additional inf ormation,
including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com
.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this
document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY
LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQ UIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION
TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOK IA RESERVES THE RIGHT TO REVISE THIS DOCUM ENT OR WITHDRAW IT AT ANY TIME
WITHOUT PRIOR NOTICE.
Reverse engineering of any software in the Nokia device is prohibited to the extent permitted by applicable law. Insofar as this user guide contains
any limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties,
damages and liabilities of Nokia's licensors.
The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for
details, and availability of language options.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion
contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry
Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service
facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or
modifications not expressly approved by Nokia could void the user's authority to operate this equipment.
Read these simple guidelines. Not following them may
be dangerous or illegal. Read the complete user guide
for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless
phone use is prohibited or when it may
cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands
free to operate the vehicle while driving.
Your first consideration while driving should
be road safety.
INTERFERENCE
All wireless devices may be susceptible to
interference, which could affect
performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off
in aircraft, near medical equipment, fuel,
chemicals, or blasting areas.
QUALIFIED SERVICE
Only qualified personnel may install or
repair this product.
12
ACCESSORIES AND BATTERIES
Use only approved accessories and batteries.
Do not connect incompatible products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it
dry.
About your device
The wireless device described in this guide is approved
for use on the (E)GSM 850, 900, 1800, and 1900
networks, and UMTS 900/1900/2100 HSDPA networks.
Contact your service provider for more information
about networks.
When using the features in this device, obey all laws
and respect local customs, privacy and legitimate
rights of others, including copyrights.
Copyright protection may prevent some images, music,
and other content from being copied, modified, or
transferred.
Your device supports several methods of connectivity.
Like computers, your device may be exposed to viruses
and other harmful content. Exercise caution with
messages, connectivity requests, browsing, and
downloads. Only install and use services and other
software from trustworthy sources that offer adequate
security and protection against harmful software, such
as applications that are Symbian Signed or have passed
the Java Verified™ testing. Consider installing antivirus
and other security software on your device and any
connected computer.
Your device may have preinstalled bookmarks and links
for third-party internet sites. You may also access other
third-party sites through your device. Third-party sites
are not affiliated with Nokia, and Nokia does not
endorse or assume liability for them. If you choose to
access such sites, you should take precautions for
security or content.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on.
Do not switch the device on when wireless device use
may cause interference or danger.
The office applications support common features of
Microsoft Word, PowerPoint, and Excel (Microsoft Office
2000, XP, and 2003). Not all file formats can be viewed
or modified.
Remember to make back-up copies or keep a written
record of all important information stored in your
device.
When connecting to any other device, read its user
guide for detailed safety instructions. Do not connect
incompatible products.
The images in this guide may differ from your device
display.
Network services
To use the device you must have service from a wireless
service provider. Many of the features require special
network features. These features are not available on
all networks; other networks may require that you
make specific arrangements with your service provider
before you can use the network services. Using
network services involves transmission of data. Check
with your service provider for details about fees in your
home network and when roaming on other networks.
Your service provider can give you instructions and
explain what charges will apply. Some networks may
have limitations that affect how you can use network
services. For instance, some networks may not support
all language-dependent characters and services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If
so, these features will not appear on your device menu.
Your device may also have a special configuration such
as changes in menu names, menu order, and icons.
Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL)
that run on TCP/IP protocols. Some features of this
device, such as e-mail, browsing, and multimedia
messaging (MMS), require network support for these
technologies.
13
Quick start guide
Your Nokia E75 is a business device that adapts to your
free time as well.
Read these first pages to get started, then use the rest
of the guide to explore what new features Nokia E75
brings to you.
SIM card, battery,
charging, memory
card
Put the pieces together, and get started with your
Nokia E75.
2. If the battery is inserted, lift the battery in the
direction of the arrow to remove it.
Insert the SIM card and
battery
1. To open the back cover of the device, with the back
facing you, unlock the back cover release button,
and lift the back cover.
14
3. Insert the SIM card. Ensure the contact area on the
card is facing the connectors on the device and that
the bevelled corner is facing the top of the device.
4. Align the contacts of the battery with the
corresponding connectors on the battery
compartment, and insert the battery in the
direction of the arrow.
5. Close the back cover.
Charge the battery
Your battery has been precharged, but the charging
levels may vary.
1. Connect the charger to a wall outlet.
2. Connect the charger to the device. You can use your
device while it is charging.
3. When the battery is fully charged, disconnect the
charger from the device, then from the wall outlet.
To reach the full operation time, charge the battery
until it has been fully charged according to the battery
level indicator.
Tip: If you have old compatible Nokia chargers,
you can use them with the Nokia E75 by
attaching the CA-44 charger adapter to the old
charger. The adapter is available as a separate
enhancement.
USB charging
You can use USB charging when a wall outlet is not
available. When charging your device with the USB
cable, the charging time is longer.
With USB charging, you can also transfer data with USB
cable while charging the device.
1. Connect a compatible USB device to your device
using a compatible USB cable.
Depending on the type of the device that is used for
charging, it may take a while for charging to start.
2. If the device is switched on, select from the
available USB mode options on the display of the
device.
Insert the memory card
Use a memory card to save the memory on your device.
You can also back up information from your device to
the memory card.
Use only compatible microSD cards approved by Nokia
for use with this device. Nokia uses approved industry
15
standards for memory cards, but some brands may not
be fully compatible with this device. Incompatible
cards may damage the card and the device and corrupt
data stored on the card.
Keep all memory cards out of the reach of
small children.
Check the compatibility of a memory card
with its manufacturer or provider.
A compatible memory card may be included in
the sales package. The memory card may be
already inserted in the device. If not, do the following:
1. Open the cover of the memory card slot.
2. Insert the memory card in the slot with the contact
area first. Ensure the contact area is facing the
connectors on the device.
3. Push the card in until it locks into place.
4. Close the cover of the memory card slot.
Eject the memory card
Important: Do not remove the memory card in
the middle of an operation when the card is being
16
accessed. Removing the card in the middle of an
operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
1. Press the power key briefly, and select Remove
memory card.
2. Open the cover of the memory card slot.
3. Press the end of the memory card to release it from
the memory card slot, and remove the card.
4. Close the cover of the memory card slot.
First start-up
1. Press and hold the power key
until you feel the device
vibrate.
2. If prompted, enter the PIN
code or lock code, and select OK.
3. When prompted, enter the country in which you are
located and the current date and time. To find your
country, enter the first letters of the country name.
It is important to select the correct country, because
scheduled calendar entries may change if you
change the country later and the new country is
located in a different time zone.
4. The Welcome application opens. Select from the
available options, or select No to close the
application. To open the Welcome application later,
select Menu > Help > Welcome.
To configure the various settings in your device, use
the wizards available in the home screen and the
Settings wizard application. When you switch the
device on, it may recognise the SIM card provider and
configure some settings automatically. You can also
contact your service provider for the correct settings.
You can switch the device on without inserting a SIM
card. The device starts up in offline mode, and you
cannot use the network-dependent phone functions.
To switch the device off, press and hold the power key.
Keys and parts
Keys and parts
1 — Light sensor
2 — Earpiece
3 — Navi™ key; hereafter referred to as scroll key. Press
the scroll key to make a selection, or to scroll left, right,
up, or down on the display. Press and hold the scroll
key to accelerate the scrolling.
4 — Home key
5 — Selection key. Press the selection key to perform
the function displayed above it.
6 — Call key
7 — Calendar key
8 — Charger connector
9 — E-mail key
10 — Power/End key. Press and hold the key to switch
the device on or off. During a call, press the end key to
reject a call or end active and held calls, or press and
hold to end data connections.
11 — Selection key
12 — Backspace key. Press the key to delete items.
13 — Secondary camera
14 — Headset connector
1 — Mirror
2 — Flash
3 — Main camera
4 — Loudspeaker
17
Keys and parts (sides)
1 — Home key
2 — Calendar key
3 — E-mail key
1 — Micro USB connector
2 — Memory card slot
3 — Volume up/Zoom in key
4 — Mute/Push to talk key
5 — Volume down/Zoom out key
6 — Capture key
One-touch keys
With One-touch keys, you can access applications and
tasks quickly.
To change the assigned application or task, select
Menu > #Control panel > Settings and General >
Personalisation > One-touch keys. Your service
provider may have assigned applications to the keys,
in which case you cannot change them.
18
Key
Home key
(1)
Calendar
key (2)
E-mail key
(3)
Press
quickly
Access the
home
screen
Open the
Calendar
application
Open your
default
mailbox
Press
quickly
twice
Open the
menu
Return to
the
previous
application
Return to
the
previous
application
Press and
hold
View the list
of active
applications
Create a
new
meeting
entry
Create a
new e-mail
message
Keyboard
Your device has a full keyboard. To
open the keyboard, slide the
keyboard out. In all applications,
the screen rotates automatically
from portrait to landscape when
you slide the keyboard out.
1 — Fun ction ke y. To i nser t digits or cha ract ers prin ted
at the top of keys, press and hold the function key and
press the corresponding key, or press and hold the
corresponding key only. To enter only the characters
printed at the top of keys, press the function key twice
quickly. To return to normal mode, press the function
key again.
2 — Shift key. To switch between the different
character cases, press the Shift key. To enter only
uppercase or lowercase letters, press the Shift key
twice quickly.
3 — Chr key. When writing text, press the Chr key to
insert characters not shown on the keyboard.
4 — Space key
5 — Ctrl key. To access the shortcuts behind the Ctrl key,
such as Ctrl + C.
6 — Backspace key
When you slide the full keyboard out for the first time,
you are asked to define the slide settings.
To access the slide settings later, select Menu >
#Control panel > Settings and General > Slide
handling.
Lock the keys
When the device or keypad is locked, calls may be
possible to the official emergency number
programmed into your device.
The keypad of your device locks automatically to
prevent the keys from being accidentally pressed. To
change the period after which the keypad is locked,
select Menu > #Control panel > Settings and
General > Security > Phone and SIM card >
Keypad autolock period.
19
To lock the keys manually in the
home screen, press the left
selection key and *.
To unlock the keys, press the left
selection key and *.
Accessories
You can connect your device to a range of compatible
accessories. Check the availability of the approved
accessories with your dealer.
Connect the headset
Warning: When you use the headset, your ability
to hear outside sounds may be affected. Do not use the
headset where it can endanger your safety.
Connect the compatible headset to the headset
connector of your device.
20
Attach a wrist strap
Thread the wrist strap, and
tighten it.
Home screen
In the home screen, you can quickly access your most
frequently used applications, and view at a glance if
you have missed calls or new messages.
Whenever you see the
list of available actions. To close the list, scroll left.
icon, scroll right to access a
The home screen
consists of the
following:
1. Application
shortcuts. To
access an
application,
select the
shortcut of the
application.
2. Information area. To check an item displayed in the
information area, select the item.
3. Notification area. To view the notifications, scroll to
a box. A box is only visible if there are items in it.
You can define two separate home screens for different
purposes, for example, one screen to show your
business e-mail and notifications, and another to show
your personal e-mail. This way, you do not have to see
business-related messages outside office hours.
To switch between the home screens, select
To define which items and shortcuts you want in the
home screen, and to set the appearance of the home
screen, select Menu > Tools > Modes.
.
Nokia Switch
Transfer content
You can use the Switch application to copy content such
as phone numbers, addresses, calendar items, and
images from your previous Nokia device to your device.
The type of content that can be transferred depends on
the model of the device from which you want to
transfer content. If that device supports
synchronisation, you can also synchronise data
between the devices. Your device notifies you if the
other device is not compatible.
If the other device cannot be switched on without a SIM
card, you can insert your SIM card in it. When your
device is switched on without a SIM card, the Offline
profile is automatically activated, and transfer can be
done.
Transfer content for the first time
1. To retrieve data from the other device for the first
time, on your device, select Phone switch in the
Welcome application, or select Menu > #Control
panel > Switch.
2. Select the connection type you want to use to
transfer the data. Both devices must support the
selected connection type.
3. If you select Bluetooth connectivity as the
connection type, connect the two devices. To have
your device search for devices with Bluetooth
connectivity, select Continue. Select the device
from which you want to transfer content. You are
asked to enter a code on your device. Enter a code
(1-16 digits), and select OK. Enter the same code on
the other device, and select OK. The devices are now
paired.
Some earlier Nokia devices may not ha ve the Switch
application. In this case, the Switch application is
sent to the other device as a message. To install the
Switch application on the other device, open the
21
message, and follow the instructions on the
display.
4. On your device, select the content you want to
transfer from the other device.
When the transfer has started, you can cancel it and
continue later.
Content is transferred from the memory of the other
device to the corresponding location in your device.
The transfer time depends on the amount of data to be
transferred.
Synchronise, retrieve, or
send content
Select Menu > #Control panel > Switch.
After the first transfer, select from the following to start
a new transfer, depending on the model:
to synchronise content between your device and
the other device, if the other device supports
synchronisation. The synchronisation is two-way. If an
item is deleted in one device, it is deleted in both. You
cannot restore deleted items with synchronisation.
to retrieve content from the other device to your
device. With retrieval, content is transferred from the
other device to your device. You may be asked to keep
or delete the original content in the other device,
depending on the device model.
to send content from your device to your other
device
22
If you cannot send an item, depending on the type of
the other device, you can add the item to the Nokia
folder, to C:\Nokia or E:\Nokia in your device. When
you select the folder to transfer, the items are
synchronised in the corresponding folder in the other
device, and vice versa.
Use shortcuts to repeat a transfer
After a data transfer, you can save a shortcut with the
transfer settings to the main view to repeat the same
transfer later.
To edit the shortcut, select Options > Shortcut
settings. For example, you can create or change the
name of the shortcut.
A transfer log is shown after every transfer. To view the
log of the last transfer, select a shortcut in the main
view and Options > View log.
Handle transfer conflicts
If an item to be transferred has been edited in both
devices, the device attempts to merge the changes
automatically. If this is not possible, there is a transfer
conflict. Select Check one by one, Priority to this
phone, or Priority to other phone to solve the
conflict.
Set up your e-mail
Your Nokia Eseries device works the same hours as you,
and at the same speed. Keep your e-mail, contacts, and
calendar synchronised - quickly and conveniently with
high speed connections.
When setting up your e-mail, you may be prompted for
the following information: user name, e-mail type,
incoming mail server, incoming mail server port,
outgoing mail server, outgoing mail server port,
password, or access point.
With the E-mail wizard, you can set up business e-mail
accounts, such as Microsoft Exchange, or internet email accounts, such as Google's e-mail services. The
wizard supports POP/IMAP, ActiveSync, and Intellisync
protocols.
If you are setting up your business e-mail, ask your
company IT department for details. If you are setting
up your internet e-mail, see your e-mail service
provider’s website for details.
To start the E-mail wizard:
1. In the home screen, scroll to the E-mail wizard.
2. Enter your e-mail address and password. If the
wizard is not able to configure your e-mail settings
automatically, select your e-mail account type, and
enter the related settings.
Tip: If you have not configured your mailbox,
press the e-mail key to start the E-mail wizard.
If your device
contains additional
e-mail clients, those
are offered to you
when you start the
E-mail wizard.
Antennas
Your device may have internal and external antennas.
As with any radio transmitting device, avoid touching
the antenna area unnecessarily while the antenna is
transmitting or receiving. Contact with such an
antenna affects the communication quality and may
cause the device to operate at a higher power level
than otherwise needed and may reduce the battery
life.
Nokia PC Suite
Nokia PC Suite is a set of applications that you can
install to a compatible PC. Nokia PC Suite groups all
available applications in a launcher window from
which you can run the applications. You can install
Nokia PC Suite from the memory card in your device.
You can use Nokia PC Suite to synchronise contacts,
calendar, and to-do and other notes between your
device and a compatible PC application, such as
Microsoft Outlook or Lotus Notes. You can also use
Nokia PC Suite to bookmark between your device and
compatible browsers, and transfer images and video
clips between your device and compatible PCs.
23
Note: If you use Mail for Exchange to syncronise
your contacts and calendar, do not use Nokia PC Suite
for synchronisation.
To use Nokia PC Suite, you need a PC that runs Microsoft
Windows XP (SP1 or SP2) or Windows Vista, and is
compatible with a USB data cable or with Bluetooth
connectivity.
Nokia PC Suite does not work with Macintosh.
For further information on Nokia PC Suite, see its help
function or the Nokia website.
To install Nokia PC Suite:
1. Ensure the memory card is inserted in your Nokia
E75 .
2. Connect the USB cable. Your PC recognises the new
device and installs the necessary drivers. This can
take several minutes to complete.
3. Select Mass storage as the USB connection mode
in your device. Your device is displayed in Windows
Explorer as a Removable Disk.
4. Open the root of the memory card drive with the
Windows file browser, and select the PC Suite
installation.
5. The installation is started. Follow the displayed
instructions.
Tip: To update your PC Suite, or if you have
problems when installing PC Suite from the
memory card, copy the installation file to your
PC, and start the installation from your PC.
24
Tips for efficient use
To switch profiles, press the power key briefly.
To switch to the Silent profile, press and hold #.
To search for items in your device or on the internet
(network service), select Menu > #Applications >
Search.
When browsing web pages with the Web browser
application or maps in the Maps application, press * to
zoom in and # to zoom out.
Support
If you have issues with your device or you are unsure
how your device should function, see the support
pages on your local Nokia website at
www.nokia.com, the Help application in the device, or
the user guide. If this does not resolve your issue, try
the following:
• Reset the device: switch off the device and remove
the battery. After a few seconds, replace the battery,
and switch on the device.
• Update your device software with Nokia Software
Updater. See www.nokia.com/softwareupdate or
your local Nokia website.
• Restore the original factory settings as explained in
the user guide. Your documents and files are not
deleted in the reset.
If the issue remains unresolved, contact Nokia for
repair options. See www.nokia.com/repair. Before
sending your device for repair, always back up or make
a record of data in your device.
Instructions in your device
To read instructions for the current view of the open
application, select Options > Help.
To browse the help topics and conduct searches, select
Menu > Help > Help. You can select categories for
which you want to see instructions. Select a category,
such as Messaging, to see what instructions (help
topics) are available.
To switch between the application and help, press and
hold the home key.
25
Nokia E75 - The basics
Welcome
When you switch on your device for the first time, the
Welcome application is displayed.
To access the Welcome application later, select
Menu > Help > Welcome.
Select from the following:
• Settings wizard — Configure various settings of
your device.
• Phone switch — T ran sf er co nte nt , s uch as co nta ct s
and calendar entries, from a compatible Nokia
device.
• E-mail setup — Configure e-mail settings.
Settings wizard
Select Menu > #Control panel > Sett. wizard.
Use Settings wizard to define e-mail and connection
settings. The availability of the items in Settings wizard
depends on the features of the device, SIM card,
network operator, and the data in the Settings wizard
database.
To start Settings wizard, select Start.
26
To get the best results when using the settings wizard,
keep your SIM card inserted in the device. If the SIM card
is not inserted, follow the instructions on the display.
Select from the following:
• Operator — Define the operator-specific settings,
such as MMS, internet, WAP, and streaming settings.
• E-mail setup — Create a new mailbox.
• Push to talk — Configure push to talk settings.
• Video sharing — Configure video sharing settings.
The settings available for editing may vary.
Menu
Select Menu.
The menu is a
starting point from
which you can open
all applications in
the device or on a
memory card.
The menu contains
applications and
folders, which are
groups of similar
applications. All
applications you install in the device yourself are by
default saved in the Applications folder.
To open an application, select the application, that is,
scroll to it, and press the scroll key.
To switch between the open applications, press and
hold the home key, and select an application. Leaving
applications running in the background increases the
demand on battery power and reduces the battery life.
Select Options and from the following:
• Change Menu view — View applications in a list or
a grid.
• Memory details — View the memory consumption
of different applications and data stored on the
device or memory card and to check the amount of
free memory.
• New folder — Create a new folder.
• Rename — Rename a new folder.
• Move — Rearrange the folder. Scroll to the
application you want to move, and select Move. A
check mark is placed beside the application. Scroll
to a new location, and select OK.
• Move to folder — Move an application to a
different folder. Scroll to the application you want
to move, and select Move to folder, the new folder,
and OK.
• Download applications — Download applications
from the web.
Display indicators
The device is being used in a UMTS network
(network service).
The battery charge level. The higher the bar,
the stronger the charge in the battery.
You have one or more unread messages in the
Inbox folder in Messaging.
You have received new e-mail in the remote
mailbox.
There are messages waiting to be sent in the
Outbox folder in Messaging.
You have one or more missed phone calls.
The keys of the device are locked.
An alarm is active.
You have activated the Silent profile, and the
device does not ring for an incoming call or
message.
Bluetooth connectivity is activated.
27
A Bluetooth connection is established. When
the indicator is blinking, your device is trying
to connect with another device.
A GPRS packet data connection is available
(network service). If the icon is
connection is active. If the icon is
connection is on hold.
, the
, the
A WLAN connection is active in a network that
has encryption.
Your device is connected to a computer with a
USB data cable.
The second phone line is being used (network
service).
28
An EGPRS packet data connection is available
(network service). If the icon is
connection is active. If the icon is
connection is on hold.
A UMTS packet data connection is available
(network service). If the icon is
connection is active. If the icon is
connection is on hold.
High-speed downlink packet access (HSDPA) is
supported and available (network service). The
icon may vary between regions. If the icon is
, the connection is active. If the icon is , the
connection is on hold.
You have set the device to scan for wireless
LANs (WLAN), and a WLAN is available.
A WLAN connection is active in a network that
does not have encryption.
, the
, the
, the
, the
All calls are forwarded to another number. If
you have two phone lines, a number indicates
the active line.
A headset is connected to the device.
A hands-free car kit is connected to the device.
A loopset is connected to the device.
A text phone is connected to the device.
Your device is synchronising.
You have an ongoing push-to-talk connection.
Your push-to-talk connection is in the do not
disturb mode, because the ringing type of your
device is set to Beep once or Silent, or you
have an incoming or ongoing phone call. In this
mode, you cannot make PTT calls.
Write text
The input methods provided in the device may vary
according to different sales markets.
Write text with the keyboard
Your device has a full keyboard.
To insert punctuation marks, press the corresponding
key or a combination of keys.
To switch between the different character cases, press
the Shift key.
To insert digits or characters printed at the top of keys,
press and hold the corresponding key, or press and
hold the function key and press the corresponding key.
To erase a character, press the backspace key. To erase
several characters, press and hold the backspace key.
To insert characters and symbols that are not shown
on the keyboard, press the Chr key.
To copy text, press and hold the Shift key, and scroll to
highlight the word, phrase, or line of text you want to
copy. Press Ctrl + C. To insert the text into a document,
move to the correct place, and press Ctrl + V.
To change the writing language, or to activate
predictive text input, select Options > Input
options and from the available options.
Predictive text input
To activate predictive text input, select Options >
Input options > Activate prediction. The indicator
is displayed. When you start writing a word,
your device suggests possible words. When the correct
word is found, scroll right to confirm it. While writing,
you can also scroll down to access a list of suggested
words. If the desired word is on the list, select the word.
If the word you are writing is not in the dictionary of
the device, the device suggests a possible word, while
the word you were writing is shown above the
suggested word. Scroll up to select your word. The
word is added to the dictionary when you start writing
the next word.
To deactivate predictive text input, select Options >
Input options > Deactivate prediction.
To define the settings for text input, select Options >
Input options > Settings.
To change the writing language, select Options >
Input options > Writing language.
Search
Search
Select Menu > #Applications > Search.
Search enables you to use various internet-based
search services to find and connect to, for example,
local services, websites, and images. The content and
availability of the services may vary.
29
Start a search
Select Menu > #Applications > Search.
To search for images on the internet, select Images.
To search for businesses, restaurants, and events in the
selected country or region, select Local.
To search for websites, select Web.
To select a search provider to use in a selected category
as a default, select Images, Local, or Web, and select
Options > Select service.
Some of the search providers are global, some are
available only in some countries or regions. To change
your country or region settings to find local search
providers, select Options > Country or region.
Search results
Select Menu > #Applications > Search.
To view the details of a search result, select Options >
Details, if available.
Select Options and from the following:
• Show on map — View the found location on the
map.
• Navigate to — Check how to navigate to the found
location.
• Open image — Open the found image in Gallery.
• Save to gallery — Save the found image to Gallery.
• Browse — View the found image in the web
browser.
• Next result — View the next search result.
• Previous result — View the previous search result.
The available options may vary.
Search services
To see what types of search services are available from
a search provider, select the search provider from the
30
list.
Search settings
Select Menu > #Applications > Search.
To configure the settings for the Search application,
select Options > Settings and from the following:
• Connection — Select the access point to use, and
allow or deny network connection.
• Search services — Select the search providers to
use.
• General — Enable or disable tooltips.
Common actions in
several applications
You can find the following actions in several
applications:
To change the profile, or switch off or lock the device,
press the power key briefly.
Loading...
+ 156 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.