Microsoft RM-37 User Manual
User’s Guide for Nokia 6610i
phone
9230846
Issue 1
LEGAL INFORMATION
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole responsibility that the product
RM-37 is in conformity with the provisions of the following Council
Directive:1999/5/EC. A copy of the Declaration of Conformity can be found at
http://www.nokia.com/phones/declaration_of_conformity/.
Part No. 9230846 Issue No. 1
Copyright ©2004 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Xpress-on and Pop-Port are trademarks or
registered trademarks of Nokia Corporation. Other product and company names
mentioned herein may be trademarks or tradenames of their respective owners.
Printed in Canada 03/2004
US Patent No 5818437 and other pending patents. T9 text input software
Copyright ©1999-2004. Tegic Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA
Security.
Java is a trademark of Sun Microsystems, Inc.
USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4
VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A)
DATA OR INFORMATION ENCODED BY A CONSUMER FOR PERSONAL AND NONCOMMERCIAL USE WITHOUT REMUNERATION; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C.
The information contained in this user guide was written for the Nokia 6610i
product. Nokia operates a policy of ongoing development. Nokia reserves the
right to make changes to any of the products described in this document without
prior notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF
DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR
INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT
ARE PROVIDED "AS IS." EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND
RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO
REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR
NOTICE.
EXPORT CONTROLS
This device may contain commodities, technology, or software that may only be
exported in accordance with the U. S. Export Administration regulations. Diversion contrary to U.S. or Canadian law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This
device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
Manufactured or sold under one or more following US Patents.
Asteris k (*) indicates design pate nts pending.
4868846 5519885 5827082 5966378 6112099 6266330
4969192 5526366 5835889 5970059 6115617 6282436
5001372 5553125 5839101 5987137 6118775 6285888
5045973 5557639 584884 5991716 612184 6 6292668
5101175 5565821 5845219 5991857 6122498 6295286
5212834 5570369 5857151 5999523 6128322 6308084
5230091 5581244 5862178 6005857 6128509 631060 9
5233634 5597102 5870683 6011853 6138091 6311054
5241284 5625274 5887266 6014573 6140966 6314166
5241583 5640395 5889770 6018277 6144243 6324412
5266782 5664004 5892475 6026161 6144676 6347218
5 3111 51 5664053 5898925 6028567 6148209 6356759
5 3111 7 9 5669069 5907823 6029128 615148 5 6359904
5317283 5677620 5914690 6038238 6151507 6363259
5331638 5678224 5914796 6043760 6163609 6370362
5335362 5692032 5915440 6047196 6164547 6370390
5353328 5699406 5917868 6049796 6167248 6377803
5378935 5699482 5920826 6050415 6170073 6393121
5384782 5701392 5926138 6055439 6178535 6430721
5390223 5729534 5926769 6060193 6185295 6434133
5396657 5729541 5930233 6069923 6188909 *29/170210
5400949 5734683 5946651 6072787 6195338 *29/170229
5416435 5754976 5956332 6081534 6199035 *29/170245
5442521 5760568 595662 5 6084962 6201876 *29/170246
5444816 5782646 595663 3 6088746 6219560
5446364 5794142 5960354 6094587 6240076
5479476 5802465 5960389 6097964 6240079
5487084 5805084 59639 01 6105 784 6249584
5493255 5805301 5966374 6108553 6259312
Contents
For your safety......................... 5
General information ................ 8
Access codes ........................................... 8
Security code (5 to 10 digits) ......... 8
PIN and PIN2 codes (4 to 8 digits),
Module PIN and Signing PIN .......... 8
PUK and PUK2 codes (8 digits) ...... 8
Barring password (4 digits) ............. 9
Wallet code (4 to 10 digits) ............ 9
Overview of the functions
of the phone........................... 10
Camera ................................................... 10
Multimedia messaging service
(MMS) ..................................................... 10
Polyphonic sound (MIDI) ................... 10
JavaTM applications ........................... 11
General Packet Radio Service
(GPRS)..................................................... 11
Over the Air (OTA) settings service. 11
1. Your phone......................... 12
Keys and connectors........................... 12
Standby mode....................................... 13
Screen saver....................................... 14
Wallpaper ........................................... 14
Essential indicators in standby
mode.................................................... 14
Headset................................................... 15
Putting on the wrist strap................. 16
2. Getting started................... 17
Installing the SIM card and the
battery .................................................... 17
Charging the battery .......................... 19
Switching the phone on and off ..... 20
Keypad lock (Keyguard) ..................... 20
Changing the covers........................... 22
3. Call functions..................... 23
Making a call ........................................ 23
Speed dialling a phone number ... 23
Answering or rejecting an incoming
call ........................................................... 24
Call waiting ....................................... 24
Options during a call.......................... 24
4. Writing text ........................ 26
Setting predictive text input
on or off ................................................. 26
Using predictive text input ............... 26
Writing compound words .............. 27
Using traditional text input.............. 27
Tips for writing text ............................ 27
5. Using the menu .................. 29
Accessing a menu function .............. 29
List of menu functions....................... 30
6. Menu functions.................. 32
Messages (Menu 1)............................. 32
Text messages (SMS) ...................... 32
Multimedia messages ..................... 37
Multimedia messages memory
full ........................................................ 40
Deleting messages ........................... 41
Chat ..................................................... 41
Voice messages................................. 42
Info messages ................................... 42
Message settings.............................. 42
Service commands ........................... 45
Call register (Menu 2) ........................ 45
Recent calls lists............................... 46
Call counters and call timers........ 46
Contacts (Menu 3) .............................. 47
Selecting settings for contacts .... 48
Saving names and phone numbers
(Add name) ........................................ 48
Searching for a name in contacts 49
Editing a name, number or
text item or changing an image .. 50
Deleting names, numbers and
images................................................. 50
Copying contacts ............................. 51
3
Sending and receiving a business
card...................................................... 51
Speed dials ........................................ 52
Info numbers and service
numbers.............................................. 52
My numbers ...................................... 52
Caller groups..................................... 53
Profiles (Menu 4)................................. 53
Settings (Menu 5).............................. 54
Personal shortcuts ........................... 54
Time and date settings................... 55
Call settings ...................................... 56
Phone settings.................................. 57
Display settings ................................ 59
Tone settings..................................... 60
Enhancement settings.................... 61
Security settings .............................. 62
Restore factory settings................. 63
Radio (Menu 6).................................... 63
Tuning a radio channel .................. 64
Using the radio................................. 64
Camera (Menu 7) ................................ 65
To take a photo ................................ 65
Camera settings ............................... 66
Gallery (Menu 8) ................................. 66
Organiser (Menu 9) ............................ 68
Alarm clock........................................ 68
Calendar ............................................. 69
To-do list............................................ 71
Games (Menu 10) ............................... 72
Launching a game ........................... 72
Memory status for games ............. 73
Game settings................................... 73
Applications (Menu 11)..................... 73
Launching an application.............. 73
Other options available for
an application or application set 74
Downloading an application ........ 74
Memory status for applications .. 75
Extras (Menu 12)................................. 75
Calculator .......................................... 75
Countdown timer ............................ 76
Stopwatch ......................................... 77
Wallet ................................................. 78
Synchronisation ............................... 80
Connectivity (Menu 13) .................... 82
Infrared............................................... 82
GPRS.................................................... 83
Services (Menu 14)............................. 84
Basic steps for accessing and using
services............................................... 84
Setting up the phone for a
service................................................. 84
Making a connection to a service 86
Browsing the pages of a service . 86
Disconnect from a service............. 87
Appearance settings of the
multi-mode browser....................... 88
Cookies ............................................... 88
Bookmarks ......................................... 88
Downloading..................................... 89
Service inbox .................................... 89
The cache memory .......................... 90
Browser security .............................. 90
Go to (Menu 15).................................. 93
SIM services (Menu 16)..................... 93
7. PC Connectivity.................. 94
PC Suite ................................................. 94
GPRS, HSCSD and CSD................... 95
Using data communication
applications .......................................... 95
8. Battery information........... 96
Charging and Discharging 969.
9. Technical Information......... 97
CARE AND MAINTENANCE ... 98
IMPORTANT SAFETY
INFORMATION........................ 99
APPENDIX .............................. 105
A message from the CTIA ................105
A message from the U.S. Food and
Drug Administration for all users of
mobile phones..................................... 108
4
FOR YOUR SAFETY
FOR YOUR SAFETY
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in
aircraft.
SWITCH OFF WHEN REFUELLING
Don’t use the phone at a refuelling point. Don’t use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Don’t use the phone where blasting is in
progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Don’t touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
5
FOR YOUR SAFETY
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all
important information stored in your phone.
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press as many
times as needed to clear the display and return to the start screen. Key
not end the call until given permission to do so.
in the emergency number, then press . Give your location. Do
■ ABOUT YOUR DEVICE
The wireless device described in this guide is approved for use on the EGSM 900,
GSM 1800 and GSM1900 network. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
■ Network Services
To use the phone you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to
function. These Network Services may not be available on all networks or you
may have to make specific arrangements with your service provider before you
can utilize Network Services. Your service provider may need to give you
additional instructions for their use and explain what charges will apply. Some
networks may have limitations that affect how you can use Network Services. For
instance, some networks may not support all language-dependent characters
and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Contact
your service provider for more information.
6
FOR YOUR SAFETY
■ Shared Memory
The following features in this device may share memory: phone book, text and
multimedia messages, images and ringing tones in gallery, calendar, to-do notes,
and Java games and applications. Use of one or more of these features may
reduce the memory available for the remaining features sharing memory. For
example, saving many images, bookmarks, Java applications, etc. may use all of
the available memory. Your device may display a message that the memory is full
when you try to use a shared memory feature. In this case, delete some of the
information or entries stored in the shared memory features before continuing.
Some of the features , such as cache, booksmarks, and security certificates may
have a certain amount of memory specially allotted to them in addition to the
memory shared with other features.
■ Enchancements and batteries
Always switch the device off and disconnect the charger before removing the
battery.
Check the model number of any charger before use with this device. This device is
intended for use when supplied with power from ACP-12, ACP-8, ACP-7, LCH-9,
and LCH-12.
Warning: Use only batteries, chargers, and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When
you disconnect the power cord of any enhancement, grasp and pull the plug, not
the cord.
Your device and its enhancements may contain small parts. Keep them out of
reach of small children.
A few practical rules about accessories and enhancements.
• Keep all accessories and enhancements out of the reach of small children.
• When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
• Installation of any complex car enhancements must be made by qualified
personnel only.
7
General information
General information
■ Access codes
Security code (5 to 10 digits)
The security code helps to protect your phone against unauthorised use.
The pre-set code is 12345. Change the code, and keep the new code
secret and in a safe place separate from your phone. To change the code,
and to set the phone to request the code, see Security settings on page
62.
PIN and PIN2 codes (4 to 8 digits), Module PIN and
Signing PIN
• The PIN (Personal Identification Number) code protects your SIM
card against unauthorised use. The PIN code is usually supplied with
the SIM card. Set the phone to request the PIN code each time the
phone is switched on, see Security settings on page 62.
• The PIN2 code may be supplied with the SIM card and is required to
access some functions, such as charging unit counters.
• The module PIN is required to access the information in the security
module. See Security module on page 90. The module PIN is supplied
with the SIM card if the SIM card has a security module in it.
• The signing PIN is required for the digital signature. See Digital
signature on page 92. The signing PIN is supplied with the SIM card if
the SIM card has a security module in it.
If you key in an incorrect PIN code three times in succession, the phone
may display SIM blocked or PIN code blocked, for example, and ask you
to enter the PUK code.
PUK and PUK2 codes (8 digits)
The PUK (Personal Unblocking Key) code is required to change a blocked
PIN code. The PUK2 code is required to change a blocked PIN2 code.
8
General information
If the codes are not supplied with the SIM card, contact your network
operator or service provider for the codes.
Barring password (4 digits)
The barring password is required when using the Call barring service, see
Security settings on page 62. You can obtain the password from your
service provider.
Wallet code (4 to 10 digits)
The wallet code is required to access the wallet services. If you key in an
incorrect wallet code several times, the wallet application is blocked for
five minutes. For further information, see Wallet on page 78.
9
Overview of the functions of the phone
Overview of the functions of the
phone
Your phone provides many functions, which are practical for daily use,
such as a calendar, a clock, an alarm clock, a camera, a radio, and many
more.
■ Camera
Your phone has a built-in camera that can be used for taking pictures.
For sending a picture via the Multimedia Messaging Service (MMS), see
Multimedia messages on page 37, see Camera (Menu 7) on page 65. The
pictures can also be used as wallpapers in standby mode or as thumbnail
pictures in Contacts.
You can save your pictures in a compatible PC using the PC Suite
software.
■ Multimedia messaging service (MMS)
The phone is able to send and receive multimedia messages composed of
text, sound and a picture. You can save the pictures and ringing tones
for personalising your phone. See Multimedia messages on page 37.
■ Polyphonic sound (MIDI)
Polyphonic sound consists of several sound components played at the
same time. Your phone has sound components from over 40
instruments, but the phone can only play a few instruments at the same
time. Polyphonic sounds are used, for example, in ringing tones and
message alert tones. The phone supports Scalable Polyphonic MIDI (SPMIDI) format.
You can receive polyphonic ringing tones via a multimedia service, see
Reading and replying to a multimedia message on page 39, or you can
download them via the gallery menu, see Gallery (Menu 8) on page 66 or
via PC suite, see PC Suite on page 94.
10
Overview of the functions of the phone
■ JavaTM applications
Your phone supports Java 2 Micro Edition, J2METM, and includes some
JavaTM applications and games that have been specially designed for
mobile phones. You can download new applications and games to your
phone, see Applications (Menu 11) on page 73.
■ General Packet Radio Service (GPRS)
GPRS technology is a network service that allows mobile phones to be
used for sending and receiving data over an Internet Protocol (IP) -based
network. GPRS is a data bearer that enables wireless access to data
networks such as the Internet. The applications that may use GPRS are
MMS and SMS messaging (SMS, Short Message Service), browsing
sessions, Java application downloading and the PC dial-up (for example,
Internet and e-mail).
Note that your phone supports three simultaneous GPRS connections.
For example, you can receive multimedia messages and, at the same
time, have an ongoing PC dial-up connection or browsing session.
Before you can use GPRS technology
• Contact your network operator or service provider for availability
and subscription to the GPRS service.
• Save the GPRS settings for each of the applications used over GPRS.
See Setting up the phone for a service on page 84, Message settings
on page 42 and GPRS on page 83.
Pricing for GPRS and applications
For more detailed information on pricing, contact your network operator
or service provider.
■ Over the Air (OTA) settings service
In order to use MMS, GPRS and other wireless services, you need to have
proper settings on your phone. You may be able to receive the settings
directly as an OTA message and you need to save the settings on your
phone. For more information on the availability of the settings, contact
your network operator, service provider or nearest authorised Nokia
dealer.
11
Your phone
1. Your phone
■ Keys and connectors
1. Power key
Switches the phone on
and off.
When the keypad is
locked, pressing the power
key briefly turns the
phone’s display lights on
for approximately 15
seconds.
2. Volume keys
Adjust the volume of the
earpiece or the
loudspeaker, or the
headset when it is
connected to the phone.
3. 4-way scroll keys
, , and
Enables, for example,
scrolling through
contacts, menus or settings and in calendar, or moving the cursor
when writing text.
4. Selection keys and
The function of these keys depends on the guiding text shown on the
display above the keys. See Standby mode on page 13.
5. dials a phone number, and answers a call. In standby mode it
shows the list of the most recently called numbers.
6. ends an active call. Exits from any function.
7. - enter numbers and characters.
and are used for various purposes in different functions.
12
Your phone
1. Charger connector
TM
2. Pop-Port
connector
used, for example, for
headsets and the data
cable.
3. Infrared (IR) port
4. Camera lens on the back
cover of the phone.
■ Standby mode
When the phone is ready for use, and you have not keyed in any
characters, the phone is in standby mode.
1. Shows the name of the network or the operator logo to indicate in
which cellular network the phone is currently being used.
2. Shows the signal strength of the cellular network at your current
location. The higher the bar, the stronger the signal.
3. Shows the battery charge level. The higher the bar, the more power
in the battery.
4. The left selection key in standby mode is Menu.
5. The right selection key in standby mode is Contacts or Go to or it has
an operator specific name. If you press the right selection key when it
is
• Contacts, you can access the Contacts menu.
• the operator specific key, you can access an operator’s homepage.
• Go to, you can then scroll to the specific function and select it. To
set the functions for your personal shortcut, see Personal
shortcuts on page 54. Same functions can also be activated if you
select the menu Go to, see Go to (Menu 15) on page 93.
13
Your phone
Screen saver
The phone automatically activates a screen saver in standby mode after
a certain length of time if no phone function is used. See Screen saver
on page 60. Press any key to deactivate the screen saver.
Wallpaper
You can set your phone to display a background picture, wallpaper,
when the phone is in standby mode. See Wallpaper on page 59.
Essential indicators in standby mode
You have received one or several text or picture messages. See
Reading and replying to an SMS message or an e-mail on page
34.
You have received one or several multimedia messages. See
Reading and replying to a multimedia message on page 39.
The phone’s keypad is locked. See Keypad lock (Keyguard) on
page 20.
The phone does not ring for an incoming call or text message
when Incoming call alert is set to Off and Message alert tone is
set to Off. See Tone settings on page 60.
The alarm clock is set to On. See Alarm clock on page 68.
The countdown timer is running. See Countdown timer on page
76.
The stopwatch is running in the background. See Stopwatch on
page 77.
When the GPRS connection mode Always online is selected and
the GPRS service is available, the indicator is shown on the top
left of the display. Refer to GPRS connection on page 83.
When a GPRS connection is established, the indicator is shown
on the top left of the display. Refer to GPRS connection on page
83 and Browsing the pages of a service on page 86.
14
Your phone
The GPRS connection is suspended (on hold), for example if
there is an incoming or outgoing call during a GPRS dial-up
connection. The indicator is shown on the top right of the
display.
Infrared connection indicator, see Infrared on page 82.
All your calls are diverted to another number, Divert all voice
calls. If you have two phone lines, the divert indicator for the
first line is and for the second line . See Call divert on
page 56.
or If you have two phone lines, the indicator displays the selected
phone line. See Line for outgoing calls on page 57.
The loudspeaker has been activated, see Options during a call on
page 24.
Calls are limited to a closed user group. See Security settings on
page 62.
The timed profile is selected. See Profiles (Menu 4) on page 53.
, , or
A headset, handsfree, loopset or music stand enhancement is
connected to the phone.
To enable the phone to show the time and date in standby mode, see
Clock on page 55 and Date on page 55.
■ Headset
Warning: When using the stereo headset your ability to hear outside
sounds may be affected. Do not use the stereo headset where it can
endanger your safety.
Connect your headset to the Pop-Port connector
as shown in the picture.
15
Your phone
You can carry the stereo headset
HDS-3 as shown in the picture.
■ Putting on the wrist
strap
Thread the strap as shown in the picture and
then tighten it.
16
Getting started
2. Getting started
■ Installing the SIM card and the battery
Keep all SIM cards out of the reach of small children. For availability and
information on using SIM card services, contact your SIM card vendor. This may
be the service provider, network operator, or other vendor.
The SIM card and its contacts can easily be damaged by scratches or
bending, so be careful when handling, inserting or removing the card.
Before installing the SIM card, always make sure that the phone is
switched off and disconnected from any enhancement and then remove
the battery.
1. To remove the back cover from the phone:
With the back of the phone facing you, push the back cover release
button (1) and remove the cover from the phone (2).
2. Remove the battery by lifting it from
the end from the finger grip (3).
17
Getting started
3. To release the SIM card holder, slide the card holder backwards (4)
and open it by lifting (5).
4. Insert the SIM card into the SIM card
holder (6). Make sure that the SIM card
is properly inserted and that the golden
contact area on the card is facing
downwards.
5. Close the SIM card holder (7) and slide
it forwards to lock it (8).
6. Replace the battery (9).
7. To replace the back cover:
First place the top of the back cover
over the locking catch on the top of
the phone (10). Direct the back
18
Getting started
cover towards the locking catches on both sides of the phone and
press to lock the cover into place (11).
■ Charging the battery
1. Connect the lead from the
charger to the socket on the
bottom of your phone.
2. Connect the charger to an AC
wall socket.
The text Charging is displayed
briefly if the phone is switched
on. If the battery is completely
flat, it may take a few minutes before the charging indicator appears
on the display or before any calls can be made.
You can use the phone while the charger is connected.
The charging time depends on the charger and the battery used. For
example, charging a BLD-3 battery with the ACP-12 charger takes up to
one hour and 30 minutes while the phone is in standby mode.
19
Getting started
■ Switching the phone on and off
Press and hold the power key .
Note that if the phone displays Insert SIM card even
though the SIM card is properly inserted, or SIM card
not supported, contact your network operator or
service provider. Your phone does not support 5-Volt
SIM cards and the card may need to be changed.
• If the phone asks for a PIN code, key in the PIN
code (displayed as ****), and press OK.
See also PIN code request in Security settings on page 62 and Access
codes on page 8.
• If the phone asks for a security code, key in the security code
(displayed as *****), and press OK.
See also Access codes on page 8.
Your device has an internal antenna.
Note: As with any other radio
transmitting device, do not touch
the antenna unnecessarily when
the device is switched on. Contact with the
antenna affects call quality and may cause
the device to operate at a higher power level
than otherwise needed. Avoiding contact
with the antenna area when operating the
device optimises the antenna performance
and the battery life.
■ Keypad lock (Keyguard)
You can lock the keypad to prevent the keys being accidentally pressed,
for example, when your phone is in your handbag.
20
Getting started
• Locking the keypad
In standby mode, press Menu and then
within 1.5 seconds.
• Unlocking the keypad
Press Unlock and then within 1.5
seconds.
To answer a call when the keyguard is on,
press . During a call, the phone can
be operated normally. When you end or
reject the call, the keypad will
automatically be locked.
For automatic keypad locking, see Automatic keyguard on page 58.
For locking the keypad during a call, see Options during a call on page
24.
When the keyguard is on, calls still may be possible to the official emergency
number programmed into your device. Key in the emergency number and press
.
21
Getting started
■ Changing the covers
Note: Before removing the cover, always switch off the power and
disconnect the charger and any other device. Avoid touching electronic
components while changing the covers. Always store and use the
device with the covers attached.
1. Remove the back cover from the phone. See step 1 in Installing the
SIM card and the battery on page 17.
2. To remove the front cover, gently pull the
locking catch on the top of the front cover from
the locking hole in the phone (1) and remove the
cover starting from the top.
3. Place the key mat on the new front
cover (2).
4. To replace the front cover, first place
the catches on the lower part of the
cover into the corresponding holes on
the phone (3) and then gently push
the catch on the top of the cover
through the locking hole on the top of
the phone (4). Press the cover into
place.
5. Replace the back cover of the phone. See step 7 in Installing the SIM
card and the battery on page 17.
22
Call functions
3. Call functions
■ Making a call
1. Key in the phone number, including the area code. If you key in an
incorrect character, press Clear to delete it.
For international calls, press twice for the international prefix
(the + character replaces the international access code) and then key
in the country code, the area code without the leading 0, if
necessary, and the phone number.
2. Press to call the number.
3. Press to end the call or to cancel the call attempt.
See also Options during a call on page 24.
Making a call using contacts
• To search for a name/phone number that you have saved in Contacts,
see Searching for a name in contacts on page 49. Press to call
the number.
Last number redialling
• In standby mode, press once to access the list of the most
recent 20 numbers that you called or attempted to call. Scroll to the
number or name that you want, and press to call the number.
Calling your voice mailbox
• In standby mode, press and hold , or press and .
If the phone asks for the voice mailbox number, key it in and press
OK. See also Voice messages on page 42.
Speed dialling a phone number
Before you can use speed dialling, assign a phone number to one of the
speed-dialling keys, from to , see Speed dials on page 52.
Call the number in either of the following ways:
• Press the speed-dialling key that you want and then press .
•If Speed dialling is set to on, press and hold a speed-dialling key until
the call is started. See Speed dialling on page 56.
23
Call functions
■ Answering or rejecting an incoming call
Press to answer an incoming call and press to end the call.
Press to reject an incoming call.
If you press Silence, only the ringing tone is muted. Then either answer
or reject the call.
If a compatible headset supplied with the headset key is connected to
the phone, you can answer and end a call by pressing the headset key.
Tip: If the Divert if busy function is activated to divert the calls,
for example to your voice mailbox, rejecting an incoming call will
also divert the call. See Call divert on page 56.
Note that when somebody is calling you, the phone shows the caller’s
name, phone number or the text Private number or Call. If more than
one name is found in Contacts with the same seven last digits of the
phone number as the caller’s number, only the phone number will be
displayed, if this is available. The phone may display an incorrect name,
if the caller’s number is not saved in Contacts but there is another name
saved with the same seven last digits in the phone number as in the
phone number of the caller.
Call waiting
During a call, press to answer the waiting call (network service).
The first call is put on hold. Press to end the active call.
To activate the Call waiting function, see Call waiting on page 57.
■ Options during a call
Many of the options that you can use during a call are network services.
For availability, contact your network operator or service provider.
Press Options during a call for some of the following options:
• Mute or Unmute, End call, End all calls, Contacts, Menu and Hold or
Unhold, New call, Private, Answer and Reject.
• Conference to make a conference call that allows up to six persons to
take part in a conference call. During a call, make a call to a new
24
Call functions
participant (New call). The first call is put on hold. When the new call
has been answered, select Conference to include the first participant
in the conference call. To have a private conversation with one of the
participants, select Private and select the desired participant. To
rejoin the conference call after a private conversation, select
Conference.
• Lock keypad to activate the keypad lock.
• Send DTMF to send DTMF (Dual Tone Multi-Frequency) tone strings,
for example passwords or bank account numbers. The DTMF system
is used by all touch-tone telephones. Key in the DTMF string or
search for it in Contacts and press OK. Note that you can key in the
wait character w and the pause character p by repeatedly pressing
.
• Swap to switch between the active call and the call on hold, Transfer
to connect a call on hold to an active call, and disconnect yourself
from the calls.
• Loudspeaker to use your phone as a loudspeaker during a call. Do not
hold the phone to your ear during loudspeaker operation. To
activate/deactivate the loudspeaker, select Loudspeaker/Handset or
press Loudsp./Handset, respectively. The loudspeaker is
automatically deactivated when you end the call or call attempt, or
connect the handsfree unit or headset to the phone.
If you have connected a compatible handsfree unit or the headset to
the phone, Handset in the options list is replaced with Handsfree or
Headset and the selection key Handset with Handsfr. or Headset,
respectively.
Warning: Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely
loud.
Using the loudspeaker with the radio, see Using the radio on page 64.
25
Writing text
4. Writing text
You can key in text, for example, when writing messages, using
traditional or predictive text input.
When you are writing text, the predictive text input is indicated by
and the traditional text input by at the top left of the display. The
character case is indicated by , , or next to the text input
indicator. You can change the character case by pressing . The
number mode is indicated by , and you can change between the
letter and number mode by pressing and holding .
■ Setting predictive text input on or off
When writing text, press Options and select Dictionary.
• To set the predictive text input on, select a language in the dictionary
options list. Predictive text input is only available for the languages
on the list.
• To revert to traditional text input, select Dictionary off .
Tip: To quickly set the predictive text input on or off when
writing text, press twice, or press and hold Options.
■ Using predictive text input
You can key in any letter with a single keypress. The predictive text input
is based on a built-in dictionary to which you can also add new words.
1. Start writing a word using the keys to . Press each key
only once for one letter. The word changes after each keystroke.
Example: To write Nokia when the English dictionary is
selected, press , , , and :
To insert a number while in letter mode, press and hold the desired
number key.
For more instructions for writing text, see Tips for writing text on
page 27.
26
Writing text
2. When you have finished writing the word and it is correct, confirm it
by adding a space with or by pressing any of the scroll keys.
Pressing a scroll key also moves the cursor.
If the word is not correct,
press repeatedly or press Options and select Matches. When
the word that you want appears, confirm it.
If the ? character is displayed after the word, the word you intended
to write is not in the dictionary. To add the word to the dictionary,
press Spell, key in the word (traditional text input is used) and press
Save. When the dictionary becomes full, the new word replaces the
oldest one that was added.
3. Start writing the next word.
Writing compound words
Key in the first part of the word and confirm it by pressing . Write the
last part of the word and confirm the word.
■ Using traditional text input
Press a number key, to , repeatedly until the desired
character appears. Not all characters available under a number key are
printed on the key. The characters available depend on the language
selected in the Language menu, see Language on page 57.
To insert a number while in letter mode, press and hold the desired
number key.
• If the next letter you want is located on the same key as the present
one, wait until the cursor appears, or press any of the scroll keys and
then key in the letter.
• The most common punctuation marks and special characters are
available under the number key .
More instructions for writing text, see Tips for writing text on page 27.
■ Tips for writing text
The following functions may also be available for writing text:
27
Writing text
• To insert a space, press .
• To move the cursor to the left, right, down or up, press the scroll keys
, , or , respectively.
• To delete a character to the left of the cursor, press Clear. Press and
hold Clear to delete the characters more quickly.
To delete all the characters at once when writing a message, press
Options and select Clear text.
• To insert a word when using the predictive text input, press Options
and select Insert word. Write the word using the traditional text
input and press Save. The word is also added to the dictionary.
• To insert a special character when using the traditional text input,
press , or when using the predictive text input, press and hold
, or press Options and select Insert symbol.
Press any of the scroll keys to scroll to a character and press Use to
select the character.
You can also scroll to a character by pressing , , or
, and select the character by pressing .
The following options are available when writing text messages:
• To insert a phone number while in letter mode, press Options and
select Insert number. Key in the phone number or search for it in
Contacts and press OK.
• To insert a name from Contacts, press Options and select Insert
contact. To insert a phone number or a text item attached to the
name, press Options and select View details.
28
Loading...