Microsoft RM-33 User Manual

Nokia 8800 and Nokia 8801 User Guide Draft

Issue 1_draft07

9232467

LEGAL INFORMATION

DECLARATION OF CONFORMITY

We, NOKIA CORPORATION declare under our sole responsibility that the products RM-13 and RM-33 are in conformity with the provisions of the following Council Directive:1999/5/EC.

A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/.

PART NO. 9238831, ISSUE NO. 1

Nokia, Nokia Connecting People, Nokia 8800, Nokia 8801, Pop-Port, PC Suite, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners.

Nokia tune is a sound mark of Nokia Corporation.

Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java is a trademark of Sun Microsystems, Inc.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION ENCODED BY A CONSUMER FOR PERSONAL AND NONCOMMERCIAL USE WITHOUT REMUNERATION; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C.

The information contained in this user guide was written for the Nokia 8800 and Nokia 8801 products. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

EXPORT CONTROLS

This device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Contents

1. Welcome................................ 8

2. Getting started .................. 11

3. Your phone......................... 15

4. Phone security ................... 18

5. Call functions..................... 20

6. Phone menus...................... 23

7. Messages ............................ 24

8. Contacts ............................. 41

9. Call log ............................... 46

10.Settings............................. 48

11.Operator menu ................. 60

12.Gallery............................... 61

13.Media ................................ 62

14.Organizer .......................... 67

15.Applications...................... 76

16.Web................................... 79

17.SIM services...................... 87

18.Computer connectivity .... 88

19.Enhancements .................. 89

20.Reference information..... 90

Index..................................... 109

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may get interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any regulations or rules. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Do not use the phone at a refuelling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible products.

For your safety

BACKUP COPIES

Remember to make back-up copies or keep a written record of all important information.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.

■ About your device

The wireless device described in this guide is approved for use on the EGSM 850, EGSM 900, GSM 1800, and EGSM 1900 networks:

Nokia 8800 phone RM-13 900, 1800, and 1900 networks

Nokia 8801 phone RM-33 850, 1800, and 1900 networks

When using the features in this device, obey all laws and respect privacy and legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock, the phone must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.

■ Network services

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.

For your safety

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information.

■ Shared memory

The phone has two different memory allocations. The following features in this device may share the first memory: contacts, text messages, multimedia messages (but no attachments), instant messages, groups, voice commands, calendar, and to-do notes. The second shared memory is used by files stored in the Gallery, attachments of multimedia messages, e-mail, and Java applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many Java

applications may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as text messages, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

Welcome

1. Welcome

Congratulations on your purchase of the Nokia 8800 or Nokia 8801 mobile phone. This is a product of superior design and craftsmanship, so please handle your phone with special care. Besides your mobile phone having stainless steel covers and a glass display treated for scratch resistance, some its other features include a calendar, a clock, an alarm clock, a radio, a music player, and a built-in camera.

■ Updates

From time to time, Nokia may update this guide to reflect changes. The latest version may be available at www.nokiausa.com. Also, an interactive tutorial may be available at www.nokiausa.com.

■ Register your phone

Make sure to register your phone at www.warranty.nokiausa.com or call 1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if you should need to call a customer center or to have your phone repaired.

■ Get help

Find your phone label

If you need to call the Nokia Customer Care Center or your service provider, you will need to provide specific information about your phone. This information is provided on the phone label (1), which is on the back of the phone (under the battery). It contains the model and serial numbers, as well as other important information about your phone.

To help Nokia promptly answer your questions, please have the following information available before contacting the Nokia Customer Care Center:

• Your phone model number (8800 or 8801)

• Type number (RM-13 or RM-33)

Welcome

• International mobile equipment identity (IMEI)

• Your zip code

• The phone or enhancement in question

■ Accessibility solutions

Nokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information, visit the web site at www.nokiaaccessibility.com.

■ E-newsletters

When you register your phone, you can sign up for the Nokia e-newsletter, Nokia Connections. You will receive tips and tricks on using your phone, enhancement information, and special offers.

■ Copyright protection

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.

■ Configuration settings service

To use some of the network services, such as mobile Internet services, multimedia messaging service (MMS), or remote Internet server synchronization, your phone needs the correct configuration settings. You may be able to receive the settings directly as a configuration message. After receiving the settings, you need to save them on your phone. The service provider may provide a PIN that is needed to save the settings. For more information on availability of the settings, contact your service provider.

When you have received a configuration message, Configuration settings

received is displayed.

• To save the settings, select Show > Save. If the phone requests Enter

settings' PIN:, enter the PIN code for the settings, and select OK. To receive

the PIN code, contact the service provider who supplies the settings. If no settings are saved yet, these settings are saved and set as default configuration settings. Otherwise, the phone asks, Activate saved

configuration settings?.

Welcome

• To discard the received settings, select Show > Discard.

• To edit the settings, see "Configuration" on page 57.

■ Network support

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as text messages, multimedia messages, instant messages, e-mail, presence enhanced contacts, mobile Internet services, content and application downloads, and synchronization with a remote Internet server, require network support for these technologies.

Getting started

2. Getting started

■ SIM card installation

Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or another vendor. Before installing the SIM card and removing the battery, always make sure that the phone is switched off and disconnected from any enhancement.

The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting, or removing the card.

To install the SIM card:

1. Push the sideways release buttons to

release the back cover of the phone.

2. Slide the back cover to remove it from the

phone.

3. Unlock the battery for the Nokia 8801

phone. See "Battery lock" on page 12. Remove the battery, as shown in the illustration.

4. Insert the SIM card into the SIM card

holder as shown. Make sure that the gold colored contact area on the SIM card is facing downwards.

Getting started

5. Position the battery so the gold colored contacts match up with those on the phone. Insert the battery, contact end first into the battery slot. Lock the battery for the Nokia 8801 phone. See "Battery lock" on page 12. Snap the other end of the battery into place.

6. Slide the back cover into place.

■ Battery lock

The battery lock feature allows the phone battery to remain securely in place. The battery lock is only available in the Nokia 8801 phone.

• To lock the battery, push the battery lock mechanism to the right (1) until it locks into place (2).

• To unlock the battery, push the battery lock mechanism to the left until it unlocks.

■ Charge the battery

Warning: Use only batteries, chargers, and enhancements approved by

Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

Getting started

This device is intended for use with the BL-5X battery. Always use original Nokia batteries. See "Nokia battery authentication guidelines" on page 91.

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the ACP-12 charger.

For availability of approved enhancements, please check with your dealer.

1. Connect the charger to a standard wall outlet.

2. Insert the charger plug into the round jack in the bottom of the phone. If the battery is completely empty, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

3. Disconnect the charger from the phone when the battery is fully charged.

You can use the phone while the charger is connected. The charging time depends on the charger and the battery used. For example, charging a BL-5X battery with the ACP-12 charger takes approximately 1 hour and 5 minutes while the phone is in the standby mode.

■ Turn the phone on and off

Press and hold the power key as shown. If the phone asks for a PIN, enter the code, and select OK.

When you turn on your phone for the first time, the phone is in standby mode (see "Standby mode" on page 16) and a query appears, asking for the configuration settings from your service provider (network service). Confirm or decline the query. See "Configuration settings service" on page 9.

Getting started

■ Open the keypad

1. Hold the phone in one hand.

2. With the other hand, press your thumb on the part of the phone that is below the display screen.

3. Push the top part of the phone (slide) upwards, as shown in the illustration.

■ Normal operating position

Use the phone only in its normal operating position.

Your device has an internal antenna.

Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.

3. Your phone

■ Keys and parts

• Power key (1)

• Loudspeaker (2)

• Earpiece (3)

• Left selection key (4)

Right selection key (5)

Middle selection key (6)

The function of the selection key depends on the guiding text shown on the display above the key.

• 4-way scroll key (7) that allows you to scroll up, down, left and right.

• Call key (8) dials a phone number and answers a call

• End key (9) ends an active call and allows you to exit from any function

• Battery cover release buttons (10)

• Microphone (11)

Your phone

• Charger connector (12)

• Enhancements connector (13)

• Camera lens (14)

• Headset HS-15, rotating clip (15)

Your phone

■ Standby mode

When you turn on your phone, the first screen that appears is the start screen, which indicates your phone is in the standby mode. When your phone is in the standby mode, the selection keys access specific functions, and the indicators appear on the start screen. Indicators show the status of the phone.

• The name of the wireless service provider (1) displays in the middle of the start screen.

• The signal strength indicator (2) shows the strength of the signal to your phone. The higher the bar, the stronger the signal.

• The battery strength indicator (3) shows how much power is left in your phone battery. The higher the bar, the more power in the battery.

• The left selection key (4) in the standby mode is Go to. Your most frequently used functions can be quickly accessed from the Go to menu.

To activate a function, select it.

To view a list with available functions, select Options > Select options. To add a function to the shortcut list, select Mark or to remove a function from the list, select Unmark.

To rearrange the functions in your personal shortcut list, select Options >

Organize. Scroll to the function you want, select Move, and scroll to where

you want to move the function.

• The middle selection key in the standby mode is Menu (5).

• The right selection key in the standby mode may be Names (6) to access the

Names menu, an operator-specific key to access an operator’s home page, or

a specific function that you have selected in the right selection key menu.

Power saving screen saver

To save power, a digital clock screen saver overwrites the display when no function of the phone has been used for a certain period of time. Select Menu > Settings > Display >

Power saver > On to activate the screen saver or press any key

to deactivate it.

Your phone

■ Indicators and icons

Your phone has two types of identifiers: indicators and icons.

Indicators

See "Standby mode" on page 16 for information on indicators.

Icons

Icons are graphical representations of a specific item or situation. The following list describes each icon.

You have received one or several text or multimedia messages.

You have received one or several multimedia messages.

The phone registered a missed call.

The phone keypad is locked.

The phone does not ring for an incoming call or text message when

Incoming call alert is set to Off and Message alert tone is set to Off.

The alarm clock is set.

Shown in the top left of the display when the packet data connection mode Always online is selected and the packet data service is available.

Shown in the top left of the display when the packet data connection is established.

Shown in the top right of the display when the packet data connection is suspended (on hold); for example, if there is an incoming or outgoing call during the packet data connection.

Indicates an active Bluetooth wireless connection.

Phone security

4. Phone security

Your phone is equipped with different security features that allow you to avoid making accidental calls and prevent unauthorized use of your phone.

■ Keypad lock (keyguard)

The keyguard disables your keypad to prevent accidental key presses.

• To lock the keypad and the power key, close the slide and confirm with Lock; or select Menu and press * within 3.5seconds.

• To unlock the keypad, open the slide; or select Unlock and press * within 1.5 seconds.

If the Security keyguard is set to On, enter the security code if requested.

To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad is automatically locked.

When the keyguard is on, calls still may be possible to the official emergency number programmed into your phone. Enter the emergency number and press the call key.

For information about Automatic keyguard and Security keyguard, see "Phone" on page 55.

■ Access codes

Security code

The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see "Security" on page 57.

PIN codes

The PIN (personal identification number) code and the UPIN (universal personal identification number) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See "Security" on page 57.

The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required to access some functions, such as call counters.

Phone security

The module PIN is required to access the information in the security module. See "Security module" on page 84.

The signing PIN is required for the digital signature. See "Digital signature" on page 86.

PUK codes

The PUK (personal unblocking key) code and the UPUK (universal personal unblocking key) code (8 digits) is required to change a blocked PIN code and UPIN code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code.

Call restrictions password

The call restrictions password (4 digits) is required when using the Call

restrictions function. See "Security" on page 57.

Wallet code

The wallet code (4 to 10 digits) is required to access the wallet services. For further information, see "Wallet" on page 69.

Call functions

5. Call functions

■ Make a call

1. Enter the phone number, including the area code. To delete an incorrect character, select Clear.

For international calls, press * twice for the international prefix (the + character replaces the international access code) and then enter the country code, the area code without the leading 0, if necessary, and the phone number.

2. To call the number, press the call key.

3. To end the call or to cancel the call attempt, press the end key, or close the slide.

1-touch dialing

Assign a phone number to one of the 1-touch dialing keys, 2 to 9. Call the number by one of the following ways:

• Press a 1-touch dialing key and then press the call key.

•If 1-touch dialing is set to On, press and hold a 1-touch dialing key until the call is started. See 1-touch dialing in "Call" on page 55.

Voice dialing

You can make a phone call by saying the name that is stored in the contacts list of the phone. A voice command is added automatically to all entries in the contact list of the phone.

Make a call

If an application is sending or receiving data using a packet data connection, end the application before you use voice dialing.

Before using voice commands, note that voice commands are language dependent. To set the language, see Voice playback language in "Phone" on page

55.

Call functions

Note: Using voice commands may be difficult in a noisy environment or

during an emergency, so you should not rely solely upon voice dialing in all circumstances.

1. In the standby mode, press and hold the right selection key. A short tone is heard and Speak now is displayed.

If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing.

2. Say the voice command clearly. If the voice recognition was successful, a list with matches is shown. The phone plays the voice command of the match at the top of the list.

After a timeout of 1.5 seconds, the phone dials the number. Or if the result is not the right one, scroll to another entry and press Select to dial the number. See "Voice commands" on page 50.

■ Answer or reject a call

• Open the slide or press the call key to answer the call. To mute the ringing tone, select Silence.

• To reject an incoming call when the slide is open, press the end key.

If Forward if busy is activated in your voice is activated in your voice mailbox, the call is forwarded to your voice mail. If not, the call is rejected. If a compatible headset supplied with the headset key is connected to the phone, press the headset key to answer and end a call.

Call waiting (network service)

To answer the waiting call during an active call, press the call key. The first call is put on hold. To end the active call, press the end key.

To activate the Call waiting function, see "Call" on page 55.

■ Options during a call

Many of the options that you can use during a call are network services. For availability, contact your network operator or service provider.

To increase or decrease the volume during a call, press the navigation key right or left.

For some of the following options, select Options during a call:

Call functions

Mute or Unmute, Contacts, Menu, Record, Lock keypad, Loudspeaker or Handset, and the network services Hold or Unhold, Answer and Decline, New call, Touch tones (to send tone strings), Swap (to switch between the active call

and the call on hold), Transfer calls (to connect a call on hold to an active call and disconnect yourself), Conference (to make a conference call that allows up to five persons to take part in a conference call), Add to conference, Private call (to discuss privately in a conference call), End call, and End all calls.

Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Phone menus

6. Phone menus

Phone features are grouped according to function and are accessed through the main menus of your phone. Each main menu contains submenus and lists from which you can select or view items and customize phone features. You can access these menus and submenus by using the scroll method.

Some menus may not be available, depending on your network. For more information, contact your service provider.

■ Menu views

Your phone may have two types of menu views: List and Grid.

In the List interface, images introduce every menu. Use the scroll up and scroll down keys to navigate through the menus. As you scroll through the menus, the menu number appears in the upper right corner of the display. Below the menu number is a scroll bar with a tab. The tab moves up or down as you scroll through the menus, providing a visual representation of your current position in the menu structure.

In the Grid interface, multiple menu icons appear on a single display. Use the four-way scroll key to navigate through the icons. The name of the menu appears at the top of the display and the icon for the selected menu is outlined.

To change the menu view, select Options > Main menu view > List or Grid.

■ Access a menu function

1. Select Menu and the menu you want.

2. If the menu contains submenus, select the one that you want.

3. If the selected menu contains further submenus, select the one that you want

4. To return to the previous menu level, select Back. To exit the menu, select

Exit.

Messages

7. Messages

You can use mobile messages to keep in touch with friends, family, and business associates by using the short message service (SMS). Not all messaging features are available in all wireless networks. Contact your service provider for availability and subscription information.

When sending messages, your phone may display the words Message sent. This is an indication that the message has been sent by your device to the message centre number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.

■ Text messages (network service)

Your device supports the sending of text messages beyond the character limit for a single message. If your message exceeds 160 characters, it will be sent as a series of two or more messages. In the navigation bar, you can see the message length indicator counting backwards from 160. For example, 10/2 means that you can still add 10 characters for the text to be sent as two messages.

Using special (Unicode) characters, such as ë, â, á, ì, takes up more space. If there are special characters in your message, the indicator may not show the message length correctly. Before the message is sent, the device tells you if the message exceeds the maximum length allowed for one message. You can cancel sending by selecting Cancel or you can save the message in the inbox.

You can add pictures and templates to your text messages. Text templates are indicated by and picture templates are indicated by . Each picture message is made up of several text messages. Therefore, sending one picture message may cost more than sending one text message. Contact your service provider for pricing information.

Before you can send any text, picture, or e-mail message, you need to save some message settings. See "Message settings" on page 37.

To check SMS e-mail service availability and to subscribe to the service, contact your service provider.

Messages

Text entry

You can enter text while writing messages by using traditional or predictive text input. When using traditional text input, press a number key, 1 to 9, repeatedly until the character you want appears. In predictive text input you can enter a letter with a single key press.

When you write text, appears at the top left of the display, indicating predictive text input, and appears, indicating traditional text input. ,

, or appears next to the text input indicator, indicating the character case. To change the character case, press #. indicates number mode. To change from the letter to number mode, press and hold #, and select Number

mode.

Settings

To set the writing language to a language other than that selected (see Phone

language on page 55), select Options > Writing language. Predictive text input

is only available for the languages on the list.

To set the predictive text input option, select Options > Dictionary on, or to set traditional text input option select Options > Dictionary off.

Predictive text input

Predictive text input allows you to write text quickly by using the phone keypad and a built-in dictionary.

1. Start writing a word, using the keys, 2 to 9, and press each key only once for

one letter. The word changes after each keystroke.

2. When you finish writing the word and it is correct, press 0.

3. If a displayed word is not correct, press * repeatedly or select Options >

Matches. When the word that you want appears, select Use.

4. If the ? character is displayed after the word, the word you intended to write

is not in the dictionary. To add the word to the dictionary, select Spell. The phone displays the entered letters. Enter the word (traditional text input is used), and select Save.

Traditional text input

Press a number key, 1 to 9, repeatedly until the character you want appears. Not all characters available under a number key are printed on the key. The characters available depend on the selected writing language. See "Settings" on page 25.

Messages

If the next letter you want is located on the same key as the present one, wait until the cursor appears, or press any of the navigation keys, and enter the letter.

The most common punctuation marks and special characters are available under the number key 1 and a space can be inserted by pressing 0.

Write and send

1. Select Menu > Messages > Create message > Text message.

2. Enter a message. See "Text entry" on page 25.

3. To insert a template to the text message, select Use template and the template you want to insert.

4. To send the message, select Send > Recently used, To phone number, To

many, or To e-mail address and enter a phone number or e-mail address.

5. To send a message using a predefined message profile, select Via sending

profile

For the sending profile, see "Text and SMS e-mail" on page 37.

Read and reply

is shown when you have received a message or an e-mail using SMS. The blinking indicates that the message memory is full. Before you can receive new messages, delete some of your old messages in the Inbox folder.

1. To view a new message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messages > Inbox. I f m or e t han on e message has been received, select the message that you want to read. indicates an unread message.

2. While reading a message, select Options and delete or forward the message,

edit the message as a text message or an SMS e-mail, rename the message you are reading or move it to another folder, or view or extract message details. You can also copy text from the beginning of the message to your phone calendar as a reminder note. To save the picture in the Templates folder when reading a picture message, select Save picture.

3. To reply as a message, select Reply > Text message or Multimedia msg.

Enter the reply message. When replying to an e-mail, first confirm or edit the e-mail address and subject.

Messages

4. To send the message to the displayed number, select Send > OK.

Templates

To access the template list, select Menu > Messages > Saved items > Text

messages > Templates.

■ Multimedia messages (network service)

Note: Only devices that offer compatible multimedia message or e-mail

features can receive and display multimedia messages. Multimedia message objects may contain viruses or otherwise be harmful to your device or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender.

A multimedia message can contain text, sound, a picture, a calendar note, a business card, or a video clip. The phone supports multimedia messages that are up to 300KB (some operators/networks may limit this to 100 KB) in size. If the message is too large, the phone may not be able to receive it. Some networks allow text messages that include an Internet address where you can view the multimedia message.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, WBMP, BMP, and PNG

• Sound: MP3, AAC, Scalable polyphonic MIDI (SP-MIDI), AMR audio and monophonic ringing tones

• Video clips: 3GP format with QCIF and SubQCIF image size and AMR, WB AMR, or ACC LC audio

You cannot receive multimedia messages during a call, a game, another Java application, or an active browsing session over GSM data. Because delivery of multimedia messages can fail for various reasons, do not rely solely upon them for essential communications.

Write and send

To set the settings for multimedia messaging, see "Multimedia" on page 38. To check availability and to subscribe to the multimedia messaging service, contact your service provider.

1. Select Menu > Messages > Create message > Multimedia msg.

2. Enter a message. See "Text entry" on page 25.

Messages

• To insert a file from the Gallery, select Options > Insert > Image, Sound

clip or Video clip and the option you want.

If you select Options >Insert > New sound clip, the Recorder opens, and you can start a new recording. When you have finished the recording, it is added to the message.

If you select Options >Insert >New image, the Camera opens, and you can take a new photo to add to the message.

• To insert a business card or a calendar note in the message, select

Options > Insert > Business card or Calendar note.

• Your phone supports multimedia messages that contain several pages (slides). Each slide can contain text, one image, a calendar note, a business card, and one sound clip. To insert a slide in the message, select

Options > Insert > Slide.

To open the slide you want (if the message contains several slides), select

Options > Previous slide > Next slide or Slide list.

To set the interval between the slides, select Options > Slide timing. To move the text component to the top or bottom of the message, select

Options > Place text first or Place text last.

• The following options may also be available: Delete to delete an image, slide or sound clip from the message, Clear text, Preview, Save message. In More options, the following options may be available: Insert contact,

Insert number, Message details, and Edit subject.

3. To send the message, select Send > Recently used, To phone number, To e-

mail address or To many.

4. Enter the recipient’s phone number or e-mail address, or search for it in

Contacts > Names. Select OK and the message is moved to the Outbox folder

for sending.

While the multimedia message is being sent, the animated icon is displayed and you can use other functions on the phone. If the sending fails, the phone tries to resend it a few times. If this fails, the message remains in the Outbox folder and you can try to resend it later.

If Save sent messages > Yes is selected, the sent message is saved in the Sent

items folder. See "Multimedia" on page 38. When the message is sent, it is

Messages

not an indication that the message has been received at the intended destination.

Read and reply

The default setting of the multimedia message service is generally on. The appearance of a multimedia message may vary depending on the receiving device.

When your phone is receiving a multimedia message, the animated icon is displayed. When the message has been received, and the text Multimedia

message received are shown.

1. To read the message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messages > Inbox. In the list of messages, indicates an unread message. Select the message that you want to view.

2. The function of the middle selection key changes according to the currently displayed attachment in the message.

To view the whole message if the received message contains a presentation, select Play.

Otherwise, select Play to listen to a sound clip or view a video clip attached to the message. To zoom in on an image, select Zoom. To view a business card or a calendar note, or to open a theme object, select Open. To open a streaming link, select Load.

3. To reply to the message, select Options > Reply > Text message or

Multimedia msg. Enter the reply message, and select Send. You can send the

reply message only to the person who sent you the original message.

Select Options and some of the following options may be also available: Play

presentation, View text, Open image, Open sound clip or Open video clip, Save image, Save sound clip, Save video clip, Details, Delete message, Reply, Reply to all, Forward to no., Forward to e-mail or Forward to many, Edit,

and Message details.

Memory full

When you have a new multimedia message waiting and the memory for the messages is full, blinks and Multimedia memory full. View waiting

Messages

message. is shown. To view the waiting message, select Show. To save the

message, select Save. To delete old messages, select the folder and the message you want to delete.

To discard the waiting message, select Exit > Yes. If you select No, you can view the message.

Folders

The phone saves received text and multimedia messages in the Inbox folder.

Multimedia messages that have not yet been sent are moved to the Outbox folder.

If you have selected Message settings > Text messages >Save sent messages >

Yes > Message settings > Multimedia msgs.> Save sent messages > Yes, the

sent messages are saved in the Sent items folder.

To save the text message that you are writing and wish to send later in the Saved

items folder, select Options > Save message > Saved text msgs. For multimedia

messages, select the option Save message. indicates unsent messages.

To organize your text messages, you can move some of them to My folders, or add new folders for your messages. Select Messages > Saved items > Text

messages > My folders.

To add a folder, select Options > Add folder. If you have not saved any folders, select Add.

To delete or rename a folder, scroll to the folder you want, and select Options >

Delete folder or Rename folder.

■ Instant messaging (network service)

You can take text messaging to the next level by experiencing instant messaging (IM) in a wireless environment. You can engage in instant messaging with friends and family, regardless of the mobile system or platform (like the Internet) they are using, as long as you all use the same instant messaging service.

Before you can start using instant messaging, you must first subscribe to your wireless service provider’s text messaging service and register with the instant messaging service you want to use. You must also obtain a user name and password before you can use instant messaging. See "Register with an instant messaging service" on page 31 for more information.

+ 80 hidden pages