Nokia, Nokia Connecting People, Nokia Care, Visual Radio, and Navi are trademarks or registered trademarks of Nokia
Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein
may be trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the
prior written permission of Nokia is prohibited.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java and all Java-based marks are trademarks or registered trademarks of Sun Microsyst ems, Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in
connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer
engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a
licensed video provider. No license is granted or shall be implied for any other use. Additional information, including
that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://
www.mpegla.com.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any
of the products described in this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS
LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY S PECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT
DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF
ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS
DOCUMENT. NOKIA RESERVES THE RIGHT TO R EVI SE THI S DO CU MEN T O R WI THD RA W IT AT ANY TIME WITHOUT PRIOR NOTICE.
The availability of particular products and applications for these products may vary by region. Please check with your
Nokia dealer for details, and availability of language options.
The third-party applications provided with your device may have been created and may be owned by persons or entities
not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the thirdparty applications. As such, Nokia does not take any responsibility for end-user support, functionality of the
Hereby, NOKIA CORPORATION declares that this RM-274 product is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the
Declaration of Conformity can be found at www.nokia.com/phones/
declaration_of_conformity/.
applications, or the information in the applications or these materials. Nokia does not provide any warranty for the
third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE
THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE
APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from the US and
other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving
equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC
rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any
changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.
Check www.nokia.com/support to get the latest version of this guide, contacts, information and
additional services and also to download PC Suite and other software. Consult the nearest service
point and set up your phone.
Use only approved enhancements and batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all important
information stored in your device.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed safety
instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone function of the device is switched on and in service. Press
the end key as many times as needed to clear the display and return to the
standby mode. Enter the emergency number, then press the call key. Give your
location. Do not end the call until given permission to do so.
About your device
The wireless device described in this guide is approved for use on the on the
EGSM 900 and GSM 1800 and 1900 networks. Contact your service provider for
more information about networks.
When using the features in this device, obey all laws and respect local customs,
privacy and legitimate rights of others, including copyrights.
Copyright protections may prevent some images, music (including ringing
tones), and other content from being copied, modified, transferred, or
forwarded.
Warning: To use any features in this device, other than the alarm clock, the
device must be switched on. Do not switch the device on when wireless device
use may cause interference or danger.
Network services
To use the phone you must have service from a wireless service provider. Many of the
features require special network features. These features are not available on all
networks; other networks may require that you make specific arrangements with your
service provider before you can use the network services. Your service provider can give
you instructions and explain what charges will apply. Some networks may have
limitations that affect how you can use network services. For instance, some networks
may not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, these features will not appear on your device menu. Your
device may also have a special configuration such as changes in menu names, menu
order, and icons. Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some
features of this device, such as multimedia messaging (MMS), e-mail application, instant
messaging, remote synchronization, and content downloading using the browser or
MMS, require network support for these technologies.
Shared memory
The following features in this device may share memory: gallery, contacts, text messages,
multimedia messages, and instant messages, e-mail, calendar, to-do notes, Java™ games
and applications, and note application. Use of one or more of these features may reduce
the memory available for the remaining features sharing memory. Your device may
display a message that the memory is full when you try to use a shared memory feature.
The security code (5 to 10 digits) helps to protect your phone against
unauthorized use. The preset code is 12345. You can change the code, and set
the phone to request the code. See "Security," p. 61.
PIN codes
The personal identification number (PIN) code and the universal personal
identification number (UPIN) code (4 to 8 digits) help to protect your SIM card
against unauthorized use. See "Security," p. 61.
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required
for some functions.
The module PIN is required to access the information in the security module.
See "Security module," p. 85.
The signing PIN is required for the digital signature. See "Digital
signature," p. 86.
PUK codes
The personal unblocking key (PUK) code and the universal personal unblocking
key (UPUK) code (8 digits) are required to change a blocked PIN code and UPIN
code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2
code. If the codes are not supplied with the SIM card, contact your local service
provider for the codes.
Restriction password
The restriction password (4 digits) is required when using Call barring
To use some of the network services, such as mobile internet services, MMS,
Nokia Xpress audio messaging, or remote internet server synchronization, your
device needs the correct configuration settings. For more information on
availability, contact your service provider, the nearest authorized Nokia dealer,
or visit the support area on the Nokia website. See "Nokia support," p. 13.
When you have received the settings as a configuration message and the
settings are not automatically saved and activated, Configuration sett.
received is displayed.
To save the settings, select Show > Save. If required, enter the PIN code
supplied by the service provider .
To discard the received settings, select Exit or Show > Discard.
Download content
You may be able to download new content (for example, themes) to your phone
(network service).
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
For the availability of different services, pricing, and tariffs, contact your service
provider.
Software updates
Nokia may produce software updates that may offer new features, enhanced
functions, or improved performance. You may be able to request these updates
through the Nokia Software Updater PC application. To update the device
software, you need the Nokia Software Updater application and a compatible
PC with Microsoft Windows 2000 or XP operating system, broadband internet
access, and a compatible data cable to connect your device to the PC.
To get more information and to download the Nokia Software Updater
application, visit www.nokiausa.com/softwareupdate or your local Nokia
website.
If software updates over the air are supported by your network, you may also
be able to request updates through the device.
See "Software updates over the air," p. 62.
Downloading software updates may involve the transmission of large amounts
of data through your service provider's network. Contact your service provider
for information about data transmission charges.
Make sure that the device battery has enough power, or connect the charger
before starting the update.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
Nokia support
Support information
Check www.nokia.com/support or your local Nokia website for the latest
version of this guide, additional information, downloads, and services related
to your Nokia product.
Configuration settings service
You may also download free configuration settings such as MMS, GPRS, e-mail,
and other services for your device model at www.nokia.com/support.
Nokia PC Suite
You may find PC Suite and related information on the Nokia website at
www.nokia.com/support.
2. Open the SIM card holder (4).
Insert the SIM card (5) with the
contact surface facing down into
the holder. Close the SIM card
holder (6).
3. Observe the battery contacts (7),
and insert the battery (8). Place
the upper part of the back cover
on the device (9), and close it
(10).
Insert a microSD card
Use only compatible microSD cards approved by Nokia for use with this device.
Nokia uses approved industry standards for memory cards, but some brands
may not be fully compatible with this device. Incompatible cards may damage
the card and the device and corrupt data stored on the card.
1. Switch the device off, and remove the back cover and the battery of the
device.
2. Slide the memory card holder to unlock (1).
3. Open the card holder (2), and insert the memory card
into the card holder with the contact surface facing
inwards (3).
4. Close the card holder (4), and slide the card holder to
lock it (5).
5. Insert the battery, and attach the back cover to the device.
Charge the battery
Check the model number of any charger before use with this device. This device
is intended for use when supplied with power from the AC-3 or AC-4 charger.
Warning: Use only batteries, chargers, and enhancements approved
by Nokia for use with this particular model. The use of any other types
may invalidate any approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer.
When you disconnect the power cord of any enhancement, grasp and pull the
plug, not the cord.
1. Connect the charger to a wall socket.
2. Con ne ct the le ad fro m t he char ge r to th e s ocket o n t he
bottom of your device.
If the battery is completely discharged, it may take a few
minutes before the charging indicator appears on the
display or before any calls can be made.
The charging time depends on the charger used. Charging
a BL-5C battery with the AC-3 charger takes approximately 2 hours and 45
minutes while the device is in the standby mode.
Your device has an internal antenna.
Note: As with any other radio transmitting
device, do not touch the antenna
unnecessarily when the device is switched
on. Contact with the antenna affects call
quality and may cause the device to operate
at a higher power level than otherwise
needed. To optimize antenna performance
and battery life, avoid contact with the
antenna area when operating the device.
Headset
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing.
Pay special attention to volume level if you connect any other headsets to the
device.
Warning: When you use the headset, your ability to hear outside
sounds may be affected. Do not use the headset where it can endanger
your safety.
Do not connect products that create an output signal as this may cause
damage to the device. Do not connect any voltage source to the Nokia
AV Connector.
When connecting any external device or any headset, other than those
approved by Nokia for use with this device, to the Nokia AV Connector,
pay special attention to volume levels.
11 — Charger connector
12 — Nokia AV Connector (2.5 mm)
13 — Mini USB cable connector
14 — Volume down key
15 — Volume up key
16 — Power key
17 — Loudspeaker
Switch the device on and off
To switch the device on or off, press and hold the power key. See "Keys and
parts," p. 18.
If the device prompts for a PIN or a UPIN code, enter the code (displayed as
****), and select OK.
The device may prompt you to set the time and date. Enter the local time, select
the time zone of your location in terms of the time difference with respect to
Greenwich mean time (GMT), and enter the date. See "Time and
date," p. 52.
When you switch on your device for the first time and the device is in the
standby mode, you may be prompted to get the configuration settings from
your service provider (network service). For more information refer to Connect
to service provider support. See "Configuration," p. 60. See "Configuration
setting service," p. 12.
Standby mode
When the device is ready for use, and you have not entered any characters, the
device is in the standby mode.
3 — Indicators
4 — Name of the network or the operator logo
5 — Clock
6 — Main screen
7 — The function of the left selection key is Go to or a shortcut to another
function. See "Left selection key," p. 52.
8 — The function of the middle selection key is Menu.
9 — The function of the right selection key is Names or a shortcut to another
function. See "Right selection key," p. 52. Operator variants may have an
operator-specific name to access an operator-specific website.
Power saving
Your device has a Power saver and a Sleep mode feature in order to save
battery power in the standby mode when no key of the device is pressed. These
features may be activated. See "Display," p. 51.
/ The phone is registered to the GPRS or EGPRS network.
/ A GPRS or EGPRS connection is established.
/ The GPRS or EGPRS connection is suspended (on hold).
A Bluetooth connection is active.
/ A push-to-talk connection is active or suspended.
If you have two phone lines, the second phone line is selected.
All incoming calls are forwarded to another number.
The loudspeaker is activated, or the music stand is connected to the device.
Calls are limited to a closed user group.
The timed profile is selected.
// A headset, handsfree, or loopset is connected to the device.
Flight mode
You can deactivate all radio frequency functions and still have access to offline
games, calendar, and phone numbers.
Use the flight mode in radio sensitive environments—on board aircraft or in
hospitals. When the flight mode is active,
Select Menu > Settings > Profiles > Flight > Activate or Personalise to
activate or set up the flight mode.
To deactivate the flight mode, select any other profile.
Emergency call in flight mode - Enter the emergency number, press the call
key, and select Yes when Exit flight profile? is displayed. The phone attempts
to make an emergency call.
Warning: With the flight profile you cannot make or receive any calls,
including emergency calls, or use other features that require network
coverage. To make calls, you must first activate the phone function by
changing profiles. If the device has been locked, enter the lock code. If
you need to make an emergency call while the device is locked and in
the flight profile, you may be also able to enter an official emergency
number programmed in your device in the lock code field and select
'Call'. The device will confirm that you are about to exit flight profile to
start an emergency call.
Keypad lock (keyguard)
To prevent accidental keypresses, select Menu, and press * within 3.5 seconds
to lock the keypad.
To unlock the keypad, select Unlock, and press * within 1.5 seconds. If Security
keyguard is set to On, enter the security code if requested.
To answer a call when keyguard is on, press the call key. When you end or reject
the call, the keypad automatically locks.
Further features are Automatic keyguard and Security keyguard. See
"Phone," p. 59.
When the keyguard is on, calls may be possible to the official emergency
number programmed into your device.
Functions without a SIM card
Several functions of your device may be used without installing a SIM card (for
example, the data transfer with a compatible PC or another compatible device).
Some functions appear dimmed in the menus and cannot be used.
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the +
character replaces the international access code), enter the country code,
the area code without the leading 0, if necessary, and the phone number.
2. To call the number, press the call key. To adjust the volume in a call, press
the volume key up or down.
3. To end the call or to cancel the call attempt, press the end key.
You can search for a name or phone number that you have saved in Contacts.
See "Search for a contact," p. 46. Press the call key to call the number.
To access the list of dialed numbers, press the call key once in the standby mode.
To call the number, select a number or name, and press the call key.
Dialing shortcuts
Assign a phone number to one of the number keys, 2 to 9. See "Dialing
shortcuts," p. 48.
Call the number in one of the following ways:
Press a number key, then the call key.
OR
If Speed dialling is set to On, press and hold a number key until the call begins.
Further details are described in Speed dialling. See "Call," p. 58.
You can make a phone call by saying the name that is saved in the contact list
of the device.
Voice commands are language-dependent. Set the Voice recognition
language before using voice dialing. See "Phone," p. 59.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely solely upon voice dialing in all
circumstances.
1. In the standby mode, press and hold the right selection key or the volume
down key. A short tone sounds, and Speak now is displayed.
2. Speak the name of the contact you want to dial clearly. If the voice
recognition is successful, a list with matches is shown. The device plays the
voice command of the first match on the list. If it is not the correct command,
scroll to another entry.
Using voice commands to carry out a selected device function is similar to voice
dialing. See "Voice commands," p. 53.
Answer or reject a call
To answer an incoming call, press the call key. To end the call, press the end
key.
To reject an incoming call, press the end key. To mute the ringing tone, select
Silence.
To answer a waiting call during an active call (network service), press the call
key. The first call is put on hold. To end the active call, press the end key. You
may also activate the Call waiting function. See "Call," p. 58.
Options during a call
Many of the options that you can use during a call are network services. For
availability, contact your service provider.
During a call, select Options and from the following options:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record,
Voice clarity, Loudspeaker or Handset.
Network options are Answer or Reject, Hold or Unhold, New call, Add to
conference, End call, End all calls, and the following:
• Send DTMF — to send tone strings
• Swap — to switch between the active call and the call on hold
• Transfer — to connect a call on hold to an active call and disconnect yourself
• Conference — to make a conference call
• Private call — to have a private discussion in a conference call
Warning: Do not hold the device near your ear when the loudspeaker
is in use, because the volume may be extremely loud.
5.Write text
Text modes
To enter text (for example, when writing messages) you can use traditional or
predictive text input.
When you write text, press and hold Options to toggle between traditional
text input, indicated by
all languages are supported by predictive text input.
The character cases are indicated by
case, press #. To change from the letter to number mode, indicated by
press and hold #, and select Number mode. To change from the number to
the letter mode, press and hold #.
To set the writing language, select Options > Writing language.
Press a number key, 2 to 9, repeatedly until the desired character appears. The
available characters depend on the selected writing language.
If the next letter you want is located on the same key as the present one, wait
until the cursor appears and enter the letter.
To access the most common punctuation marks and special characters,
repeatedly press the number key 1 or press * to select a special character.
Predictive text input
Predictive text input is based on a built-in dictionary to which you can also add
new words.
1. Start writing a word, using the keys 2 to 9. Press each key only once for one
letter.
2. When you finish writing the word and it is correct, to confirm it by adding
a space, press 0.
If the word is not correct, press * repeatedly, and select the word from the
list.
If the ? character is displayed after the word, the word you intended to write
is not in the dictionary. To add the word to the dictionary, select Spell. Enter
the word using traditional text input, and select Save. To write compound
words, enter the first part of the word, and press the scroll key right to
confirm it. Write the last part of the word, and confirm the word.
3. Start writing the next word.
6.Navigate the menus
The device offers you an extensive range of functions that are grouped into
menus.
2. Scroll through the menu, and select an option (for example, Settings).
3. If the selected menu contains further submenus, select one (for example,
Call).
4. If the selected menu contains further submenus, repeat step 3.
5. Select the setting of your choice.
6. To return to the previous menu level, select Back.
To exit the menu, select Exit.
To change the menu view, select Options > Main menu view > List or
Grid.
To rearrange the menu, scroll to the menu to be moved, and select Options >
Organise > Move. Scroll to where you want to move the menu, and select
OK. To save the change, select Done > Yes.
7.Messaging
You can read, write, send, and save text, multimedia, e-mail, audio, and flash
messages and postcards. All messages are organized into folders.
Text messages
Your device supports the sending of text messages beyond the character limit
for a single message. Longer messages are sent as a series of two or more
messages. Your service provider may charge accordingly. Characters that use
accents or other marks, and characters from some language options, take up
more space, limiting the number of characters that can be sent in a single
message.
With the short message service (SMS) you can send and receive text messages
and receive messages that can contain pictures (network service).
Before you can send any text message, you must save your message center
number. See "Message settings," p. 42.
To check SMS e-mail service availability and to subscribe to the service, contact
your service provider. You can save an e-mail address in Contacts. See "Save
details," p. 45.
Write and send a text message
1. Select Menu > Messaging > Create message > Text message.
2. Enter one or more phone numbers or e-mail addresses in the To: field. To
retrieve a phone number or e-mail address, select Add.
3. For a SMS e-mail, enter a subject in the Subject: field.
4. Write your message in the Message: field.
An indicator at the top of the display shows the total number of characters
left and the number of messages needed for sending. For example, 673/2
means that there are 673 characters left and that the message will be sent
as a series of 2 messages.
5. To send the message, select Send. See "Message sending process," p. 31.
Read and reply to a text message
1. To view a received message, select Show. To view it later, select Exit.
2. To read the message later, select Menu > Messaging > Inbox.
shown if you have unread messages in the inbox.
3. To reply to a message, select Reply and the message type.
4. Create the reply message.
5. To send the message, select Send. See "Message sending process," p. 31.
is
Multimedia messages
Only devices that have compatible features can receive and display multimedia
messages. The appearance of a message may vary depending on the receiving
device.
The wireless network may limit the size of MMS messages. If the inserted picture
exceeds this limit, the device may make it smaller so that it can be sent by MMS.
A multimedia message can contain text and objects such as images, sound clips,
or video clips.
To check availability and to subscribe to the multimedia messaging service
(MMS), contact your service provider. See "Message settings," p. 42.
Write and send a multimedia message
1. Select Menu > Messaging > Create message > Multimedia.
2. Create your message.
Your device supports multimedia messages that contain several pages
(slides). A message can contain a calendar note and a business card as
attachments. A slide can contain text, one image, and one sound clip; or text
and a video clip. To insert a slide in the message, select New; or select
Options > Insert > Slide. To insert a file in the message, select Insert.
3. To view the message before sending it, select Options > Preview.
4. To send the message, select Send.
5. Enter one or more phone numbers or e-mail addresses in the To: field. To
retrieve a phone number or e-mail address, select Add.
6. For an SMS e-mail, enter a subject in the Subject: field.
7. To send the message, select Send. See "Message sending process," p. 31.
Write and send a multimedia plus message
Any content can be added to the multimedia plus message. Such content might
be images, video clips, sound clips, business cards, calendar notes, themes,
streaming links, or even unsupported files (for example, files received with an
e-mail).