Microsoft RM-268 User Manual

Nokia 6288 User Guide
XXXXXXX
Issue 1
1
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-268 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/..
0434
The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. For more information, see product Eco-Declaration or country specific information at www.nokia.com.
Copyright © 2006 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.
US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1999-2006. Tegic Communications, Inc. All rights reserved.
Nokia, Visual Radio, Nokia Connecting People, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java is a trademark of Sun Microsystems, Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.
Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.
2
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.
XXXXXXX/Issue 1
3
Contents
For your safety ..................................6
General information................. 9
Access codes............................................ 9
Configuration settings service ........ 10
Download content and
applications ...........................................10
Nokia support and contact
information ...........................................11
1. Get started ......................... 12
Install the SIM card and battery .... 12
Install a memory card........................ 13
Charge the battery.............................. 14
Switch the phone on and off........... 15
Start up without a SIM card............ 16
Open the keypad ................................. 16
Normal operating position ............... 16
2. Your phone......................... 17
Keys and parts...................................... 17
Standby mode ...................................... 18
Keypad lock (keyguard) ..................... 21
3. Call functions..................... 23
Make a voice call ................................ 23
Answer or reject a voice call ........... 24
Options during a voice call .............. 25
4. Write text........................... 26
Settings.................................................. 26
Predictive text input .......................... 26
Traditional text input......................... 27
5. Navigate the menus .......... 28
6. Messaging .......................... 29
Text messages (SMS).......................... 29
SIM messages....................................... 30
Multimedia messages ........................ 31
Memory full.......................................... 34
Folders.................................................... 34
Flash messages .................................... 34
Audio messages................................... 35
Instant messaging............................... 36
E-mail application .............................. 41
Voice messages.................................... 44
Info messages ...................................... 44
Service commands.............................. 44
Delete messages.................................. 45
Message settings................................. 45
7. Contacts.............................. 49
Search for a contact .......................... 49
Save names and phone numbers.... 49
Save numbers and text items.......... 49
Move or copy contacts...................... 50
Edit contact details ............................ 50
Delete contacts.................................... 51
My presence ......................................... 51
Subscribed names............................... 52
Business cards...................................... 53
Settings.................................................. 54
Groups.................................................... 54
Speed dials............................................ 54
Service and my numbers................... 55
8. Call log................................ 56
9. Settings............................... 57
Profiles ................................................... 57
Themes ................................................... 58
Tones....................................................... 58
Display.................................................... 58
Time and date ...................................... 60
My shortcuts ........................................ 60
Connectivity ......................................... 62
Call .......................................................... 67
Phone...................................................... 68
4
Enhancements ...................................... 69
Configuration........................................ 69
Security .................................................. 70
Restore factory settings..................... 71
10.Operator menu.................. 72
11.Gallery ............................... 73
Format memory card .......................... 73
12.Media ................................ 74
Camera ................................................... 74
Media player ......................................... 75
Music player.......................................... 76
Radio ....................................................... 77
Voice recorder....................................... 79
Equalizer................................................. 80
Stereo widening................................... 80
13.Organizer........................... 81
Alarm clock............................................ 81
Calendar................................................. 81
To-do list................................................ 82
Notes....................................................... 83
Calculator .............................................. 83
Countdown timer ................................ 84
Stopwatch ............................................. 84
14.Applications...................... 86
Games ..................................................... 86
Collection............................................... 86
15.Web ................................... 88
Basic steps to access and use
services ................................................88
Set up browsing................................... 88
Connect to a service........................... 88
Browse pages........................................ 89
Bookmarks ............................................. 90
Appearance settings ........................... 91
Security settings .................................. 92
Download settings .............................. 92
Service inbox ........................................ 92
Cache memory...................................... 93
Browser security .................................. 93
16.SIM services....................... 96
17.PC connectivity ................. 97
Nokia PC Suite...................................... 97
GPRS, HSCSD, and CSD...................... 97
Data communication applications . 97
18.Battery information.......... 99
Charging and discharging................. 99
Nokia battery authentication
guidelines ..........................................100
19.Technical Information ... 102
Care and maintenance ........ 103
Additional safety
information ..........................104
Index..................................... 108
APPENDIX ............................ 111
A message from the CTIA................. 111
Message from the FDA.......................114
5
For your safety
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which could affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Do not use the phone at a refueling point. Do not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the phone where blasting is in progress.
USE SENSIBLY
Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect incompatible products.
6
For your safety
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all important information stored in your phone.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.
About your device
The wireless device described in this guide is approved for use on the GSM 900, 1800 and1900 networks. Contact your service provider for more information about networks.
When you use the features in this device, obey all laws and respect privacy and legitimate rights of others.
When you take and use images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.
Network services
To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your
7
For your safety
device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as multimedia messaging (MMS), browsing, e-mail application, instant messaging, presence-enhanced contacts, remote synchronization, and content downloading using the browser or MMS, require network support for these technologies.
Shared memory
The following features in this device may share memory: gallery, contacts, text messages, multimedia messages, instant messages, e-mail, calendar, to-do notes,
TM
Java
games and applications, and note application. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many Java applications may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as text messages, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.
Enhancements
A few practical rules about accessories and enhancements.
• Keep all accessories and enhancements out of the reach of small children.
• When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
• Installation of any complex car enhancements must be made by qualified
personnel only.
8
General information
General information
Access codes
Security code
The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see “Security,” p. 70.
If you enter an incorrect security code five times in succession, the phone ignores further entries of the code. Wait for 5 minutes, and enter the code again.
PIN codes
The personal identification number (PIN) code helps to protect your SIM card against unauthorized use. See “Security,” p. 70. The PIN code is usually supplied with the SIM card. Set the phone to request the PIN code each time the phone is switched on.
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for some functions.
The module PIN is required to access the information in the security module. See “Security module,” p. 94. The module PIN is supplied with the SIM card if the SIM card has a security module in it.
The signing PIN is required for the digital signature. See “Digital signature,” p. 95. The signing PIN is supplied with the SIM card if the SIM card has a security module in it.
PUK codes
The personal unblocking key (PUK) code is required to change a blocked PIN code. If the codes are not supplied with the SIM card, contact your service provider for the codes.
9
General information
Barring password
The barring password (4 digits) is required when you use the Call barring
service. See “Security,” p. 70. You can obtain the password from your
service provider. If you enter an incorrect barring password three times in succession, the password is blocked. Contact your service provider or network operator.
Configuration settings service
Before you use multimedia messaging, instant messaging and presence, e-mail, synchronization, streaming, and the browser, you must have the proper configuration settings on your phone. You may receive the settings directly as a configuration message, which you save to your phone. For more information on availability, contact your network operator, service provider, or nearest authorized Nokia dealer.
When you have received the settings as a configuration message, and the settings are not automatically saved and activated, Configuration
settings received is displayed.
To save the received settings, select Show > Save. If the phone requests
Enter settings’ PIN:, enter the PIN code for the settings, and select OK. To
receive the PIN code, contact the service provider that supplies the settings.
If no settings are saved, these settings are saved and set as default configuration settings. Otherwise, the phone asks, Activate saved
configuration settings?
To discard the received settings, select Show > Discard.
Download content and applications
You may be able to download new content (for example, themes) to the phone (network service). Select the download function (for example, in the Gallery menu). To access the download function, see the respective menu descriptions.
For the availability of different services, pricing, and tariffs, contact your service provider.
10
General information
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
Nokia support and contact information
Check www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.
On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia contact centers at www.nokia.com/customerservice.
For maintenance services, check your nearest Nokia service center location at www.nokia.com/repair.
11
Get started
1. Get started
Install the SIM card and battery
Always switch the device off and disconnect the charger before removing the battery.
Keep all SIM cards out of the reach of small children.
For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.
This device is intended for use with the BP-6M battery.
The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting, or removing the card.
1. With the back of the phone facing
you, slide the back cover to remove it from the phone (1).
2. To remove the battery, lift it as
shown (2).
3. To release the SIM card holder,
gently pull the locking clip of the card holder, and open it (3).
12
Get started
4. Insert the SIM card into the SIM card holder (4). Make sure that the SIM card is properly inserted (1) and that the gold-colored contact area on the card is facing downwards.
Close the SIM card holder (2), and press it until it snaps into position.
5. Replace the battery (5).
6. Slide the back cover into place (6).
Install a memory card
The miniSD card included with your phone contains preloaded ringing tones, themes, tones, and graphics. If you delete, reload, or replace this card, these functions and features may not function properly.
Use only compatible miniSD cards with this device. Other memory cards, such as reduced size MMCs, do not fit in the memory card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.
Use only miniSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards but not all other brands may be fully compatible with this device. Using a memory card not approved by Nokia may damage the memory card as well as the device, and data stored on the card may be corrupted.
13
Get started
You can use a memory card to extend the memory of Gallery. See “Gallery,” p. 73.
You can insert or change the memory card without switching the phone off.
Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.
To insert the memory card, open the memory card holder as shown (1). Place the memory card in the card holder (2). Make sure that the memory card is properly inserted—that it clicks into the holder (3)—and that the gold-colored contact area on the card is facing upwards. Close the memory card holder.
You can use the memory card to save your multimedia files, such as video clips, sound files, and images, in Gallery.
To format the memory card, see “Format memory card,” p. 73.
Charge the battery
Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-4, AC-1, AC-3, or DC-4 charger.
Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.
14
Get started
For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
1. Connect the charger to a wall socket.
2. Connect the plug from the charger into the CA-44 charging adapter (1), and the adapter plug into the jack on the bottom of your phone (2).
If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.
The charging time depends on the charger and the battery used. For example, charging a BP-6M Li-Ion battery with the AC-4 charger takes about 1 hour and 45 minutes while the phone is in the standby mode.
Switch the phone on and off
Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
Press and hold the power key as shown.
If the phone asks for a PIN, enter the code, and select
OK.
You can switch on the phone in demo mode without a SIM card inserted. In this mode, all bearer-independent features are available, and you can make emergency calls.
Set the time, time zone, and date
Enter the local time, select the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT), and enter the date. See “Time and date,” p. 60.
15
Get started
Plug and play service
When you switch on your phone for the first time, and the phone is in the standby mode, you may be asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See Connect to serv. support in “Configuration,” p. 69 and “Configuration settings service,” p. 10.
Start up without a SIM card
To start up the phone without the SIM card, accept Start up phone
without SIM card?. Then use those features that do not require the SIM
card.
Open the keypad
To open the keypad, slide the phone as shown.
Normal operating position
Use the phone only in its normal operating position.
Your device has an internal antenna.
Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.
16
2. Your phone
Keys and parts
1. Power key
2. Volume keys
3. Mirror
4. Camera lens
5. Camera light
6. Camera key
7. Earpiece
8. Left, middle, and right selection keys
9. 4-way navigation key
10.Call key
11.End key
12.Number keys
10
Your phone
7
8
9
11
12
17
Your phone
13.Voice recorder key
14.Infrared (IR) port
15.Memory card slot
16.Charger connector
17.Enhancements connector
Standby mode
17
16
15
14
When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.
• Signal strength of the cellular network (1)
• Battery charge level (2)
• Indicators (3)
1
4
5
2
3
• The name of the network or the operator logo (4)
• Clock (5)
6
• Display (6)
• The left selection key (7) is Go to or a shortcut to another function. See “Left selection key,” p. 60.
8
7
9
• The middle selection key (8) mode is Menu.
• The right selection key (9) may be Names to access the list of contacts in the Contacts menu, an operator-specific name to access an operator-specific Web site, or a shortcut to a function that you selected. See “Right selection key,” p. 61.
13
18
Your phone
Active standby
In the active standby mode, the phone can display separate content item windows, such as shortcuts (1), audio functions (2), the calendar (3), and a user note (4). To select whether active standby is shown, see Acti ve standb y in “Standby settings,” p. 58.
When active standby is idle, to access the menu structure, select Menu (5). To access the features in active standby, press the navigation key up or down.
To change the key to access the navigation mode, see Enabling active
standby in “Standby settings,” p. 58. When the arrow indicators (6) are
shown, you can scroll the item left and right.
Content items in the navigation mode
Shortcut bar — To select a shortcut, scroll to the desired function, using
left/right navigation key, and select it.
To change or organize the shortcuts when in the navigation mode, select Options > Active standby > My active standby > Options >
Personalise > Options > Select links or Organise links.
Audio applications — To switch on the radio or the music player, scroll to
and select it. To change a track in the music player or a channel in the radio, scroll left or right. To start the radio channel search, scroll and hold left or right.
Calendar — To view today’s notes, select the desired one. To view the
notes for the previous or next days, scroll left or right.
My note — To enter a note, select the content window, write your note,
and save it.
My presence — To ch ange your presence status information, select the
content item.
19
Your phone
Countdown timer — To start the countdown timer, select the content
item. The remaining time with a note is shown.
General indicators — To show standby indicators, such as date, cell info
display, info messages, and closed user group index. The date is shown if the calendar is not selected as active standby content.
Standby mode shortcuts
• To access the list of dialed numbers, press the call key once. See “Make a voice call,” p. 23.
• To call your voice mailbox (network service) when you have saved your voice mailbox number in the phone, press and hold 1.
• To connect to a browser service, press and hold 0.
• To set shortcut functions for the navigation key, see Navigation key in “My shortcuts,” p. 60.
• To change the profile, briefly press the power key to open the list of profiles. Scroll to the desired profile, and select it.
Power saver
To set the power saving function On, see Power saver in “Display,” p. 58.
Indicators
You have unread messages in the Inbox folder.
You have unsent, canceled, or failed messages in the Outbox folder.
The phone registered a missed call.
/ Your phone is connected to the instant messaging service, and
the availability status is online or offline.
You received one or several instant messages, and you are connected to the instant messaging service.
The keypad is locked.
20
Your phone
The phone does not ring for an incoming call or text message. See also “Tones,” p. 58.
The alarm clock is set to On.
The countdown timer is running.
The stopwatch is running in the background.
The phone is registered to a GPRS network.
A packet data connection is established.
The packet data connection is suspended (on hold), for example,
if there is an incoming or outgoing call during a packet data dial-up connection.
When the infrared connection is activated, the indicator is shown continuously.
A Bluetooth connection is active.
If you have two phone lines, the second phone line is selected.
All incoming calls are diverted to another number.
The loudspeaker is activated, or the music stand is connected to the phone.
Calls are limited to a closed user group.
The timed profile is selected.
, , , or
A headset, hands-free, loopset, or music stand enhancement is connected to the phone.
Keypad lock (keyguard)
To prevent the keys from being accidentally pressed, select Menu, and
within 3.5 seconds to lock the keypad; or close the slide, and
press
*
select Lock.
21
Your phone
To unlock the keypad, open the slide, or select Unlock > OK. If the slide is open, select Unlock, and press * within 1.5 seconds. If the Security
keyguard is set On, select Unlock, press *, and enter the security code.
To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad automatically locks.
For Automatic keyguard and Security keyguard, see “Phone,” p. 68.
When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.
22
Call functions
3. Call functions
Make a voice call
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the + character replaces the international access code), enter the country code, the area code without the leading 0, if necessary, and the phone number.
2. To call the number, press the call key.
3. To end the call, or to cancel the call attempt, press the end key.
To end the call by closing the slide, see Slide call handling in “Call,” p. 67.
To search for a name or phone number that you have saved in Contacts, see “Search for a contact,” p. 49. Press the call key to call the number.
To access the list of phone numbers you have most recently called or attempted to call, in the standby mode, press the call key once. To call the number, scroll to the number or name you want, and press the call key.
Speed dialing
Assign a phone number to one of the speed-dialing keys, 3 to 9. See “Speed dials,” p. 54. Call the number in either of the following ways:
• Press the speed-dialing key, then the call key.
•If Speed dialling is set to On, press and hold a speed-dialing key until the call begins. See “Call,” p. 67.
Enhanced voice dialing
To make a phone call, select and hold Names and say the name of the contact you wish to call. The phone will automatically associate a virtual voice tag with each contact in the phone memory.
23
Call functions
Make a voice dialing call
If an application is sending or receiving data using a packet data connection, end the application before you use voice dialing in GSM.
Voice commands are language-dependent. To set the language, see
Voice playback language in “ Phone,” p. 68.
Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key. A short tone is played, and Speak now is displayed.
If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing.
2. Say the voice command clearly. If the voice recognition is successful, a list with matches is shown. The phone plays the voice command of the match on the top of the list. After about 1.5 seconds, the phone dials the number; or if the result is not the correct one, scroll to another entry, and select to dial the entry.
Using voice commands to carry out a selected phone function is similar to voice dialing. See Voice commands in “My shortcuts,” p. 60.
Answer or reject a voice call
To answer a call, press the call key. To answer the call by opening the slide, see also Slide call handling in “Call,” p. 67.
To mute the ringing tone before you answer the call, select Silence.
To end the call or reject a call, press the end key.
Call waiting
During a call, to answer the waiting call, press the call key. The first call is put on hold. To end the active call, press the end key.
To activate the Call waiting function, see “Call,” p. 67.
24
Call functions
Options during a voice call
Many of the options that you use during a call are network services. For availability, contact your network operator or service provider.
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record,
Loudspeaker, or Handset.
Network services options are Answer, Reject, Hold or Unhold, New call,
Add to conference, End call, End all calls, and the following:
Send DTMF — to send tone strings
Swap — to switch between the active call and the call on hold
Transfer — to connect a call on hold to an active call and disconnect
yourself
Conference — to make a conference call that allows up to five persons to
take part in a conference call
Private call — to discuss privately in a conference call
Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.
25
Write text
4. Write text
To enter text (for example, when writing messages), use traditional or predictive text input. To use traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single keypress.
When you write text, appears at the top left of the display, indicating predictive text input, and appears, indicating traditional text input. , , or appears next to the text input indicator, indicating the character case. To change the character case, press #.
indicates number mode. To change from the letter to number
mode, press and hold #, and select Number mode.
Settings
To set the writing language while writing text, select Options > Writing
language.
When writing text, select Options > Prediction settings.
To set predictive text input on or revert to traditional text input, select
Prediction > On or Off.
Tip: To quickly set predictive text input on or off when writing text, press # twice, or select and hold Options.
Predictive text input
Predictive text input allows you to write text quickly using the phone keypad and a built-in dictionary.
1. To start writing a word, use the 2 to 9 keys. Press each key only once for one letter. The phone displays * or the letter if it separately has a meaning as a word. The entered letters are displayed underlined.
If you select Word suggestions as prediction type, the phone starts to predict the word you are writing. After you enter a few letters, and if these entered letters are not a word, the phone tries to predict longer words. Only the entered letters are displayed underlined.
26
Write text
To insert a special character, press and hold *, or select Options >
Insert symbol. Scroll to a character, and select Use.
2. When you finish writing the word and it is correct, to confirm it, press 0 to add space.
If the word is not correct, press
Matches. When the word that you want appears, select Use.
If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell. Complete the word (traditional text input is used), and select Save.
repeatedly, or select Options >
*
Traditional text input
Press a number key, 1 to 9, repeatedly until the desired character appears. Not all characters available under a number key are printed on the key. The characters that are available depend on the selected writing language. See “Settings,” p. 26.
If the next letter you want is located on the same key as the present one, wait until the cursor appears; or briefly press any of the navigation keys and enter the letter.
The most common punctuation marks and special characters are available under the 1 key. For more characters, press *.
27
Navigate the menus
5. Navigate the menus
The phone offers you an extensive range of functions that are grouped into menus.
1. To access the menu, select Menu.
To change the menu view, select Options > Main menu view > List,
Grid, Grid with labels, or Tab.
To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes.
2. Scroll through the menu, and select an option (for example,
Settings).
3. If the selected menu contains further submenus, select the one that you want (for example, Call).
4. If the selected menu contains further submenus, repeat step 3.
5. Select the setting of your choice.
6. To return to the previous menu level, select Back. To exit the menu, select Exit.
The menus, submenus, and setting options are numbered. To access some of them, use their shortcut number.
To access the menu, select Menu. Enter quickly, within 2 seconds, the shortcut number of the menu function you want to access. To access the menu functions in menu level 1, enter 0 and 1.
28
Messaging
6. Messaging
You can read, write, send, and save text, multimedia, e-mail, audio, and flash messages. All messages are organized into folders.
Text messages (SMS)
With the short message service (SMS) you can send and receive text messages, and receive messages that can contain pictures (network service).
Before you can send any text or SMS e-mail message, you must save your message center number. See “Message settings,” p. 45.
To check SMS e-mail service availability and to subscribe to the service, contact your service provider. To save an e-mail address in Contacts, see “Save numbers and text items,” p. 49.
Your device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message.
At the top of the display, you can see the message length indicator counting backwards from the maximum number of characters supported by the phone.
Write and send SMS messages
1. Select Menu > Messaging > Create message > Text message.
2. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add > Contact. To send the message to multiple recipients, add the desired contacts one by one. Scroll up to add new contacts manually in the To: field. To s end the message to persons in a group, select Contact group and the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently used.
29
Messaging
3. Scroll down, and write your message in the Message: field. See “Write text,” p. 26.
To insert a template into the message, select Options > Use template.
4. To send the message, select Send; or press the call key. See “Send a message,” p. 32.
Read and reply to an SMS message
1 message received or the number of new messages with messages received are shown when you have received a message.
1. To view a new message, select Show. To view it later, select Exit.
To read the message later, select Menu > Messaging > Inbox. If more than one message is received, select the message you want to read.
is shown if you have unread messages in Inbox.
2. To view the list of available options while reading a message, select
Options. You can, for example, select to copy text from the beginning
of a message to your phone calendar as a reminder note.
3. To reply to a message, select Reply > Text message, Multimedia,
Flash message, or Audio message.
To send a text message to an e-mail address, enter the e-mail address in the To: field.
Scroll down, and write your message in the Message: field. See “Write text,” p. 26.
If you want to change the message type for your reply message, select Options > Change message type.
4. To send the message, select Send; or press the call key.
SIM messages
SIM messages are text messages that are saved to your SIM card. You can copy or move those messages to the phone memory, but not vice versa. Received messages are saved to the phone memory.
To read SIM messages, select Menu > Messaging > Options > SIM
messages.
30
Loading...
+ 89 hidden pages