Microsoft RM-25 Users Manual

r1024_en.book Page 1 Thursday, July 8, 2004 12:40 PM

User’s Guide for Nokia 6260

9232479

Issue 1 EN

r1024_en.book Page 2 Thursday, July 8, 2004 12:40 PM

DECLARATION OF CONFORMITY

We, NOKIA CORPORATION declare under our sole responsibility that the product RM-25 is in conformity with the provisions of the following Council Directive:

1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/

Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

Nokia, Nokia Connecting People, Pop-Port and Xpress-on are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Nokia tune is a sound mark of Nokia Corporation.

Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.

m-Router Connectivity Components © 2000-2002 Intuwave Limited. All rights reserved. (www.intuwave.com) US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2004. Tegic Communications, Inc. All rights reserved.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided ‘as is’. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Check with the Nokia dealer nearest to you.

9232479

Issue 1 EN

r1024_en.book Page 3 Thursday, July 8, 2004 12:40 PM

Contents

For your safety .............. 7

General information .... 10

Stickers in the sales package.....10

Access codes...................................10

PIN code...................................10

PIN2 code................................10

Lock code.................................10

PUK and PUK2 codes............10

1. Getting started.........11

Inserting a SIM card and a

MultiMediaCard ............................11

Charging the battery....................12

Switching the phone

on and off .......................................12

2. Your phone ............... 14

Mechanical modes........................14

Closed mode ...........................14

Work mode..............................14

Browse mode..........................15

Imaging mode ........................15

Keyguard..................................15

Keys and connectors....................16

Indicators in standby mode .......17

Menu ................................................18

Actions common to all

applications ....................................19

Volume control..............................20

3. Call functions ........... 22

Making a call..................................22

Using the Contacts

directory...................................22

Calling your

voice mailbox.........................22

Speed dialling ........................23

Making a conference call ... 23

Answering a call ...........................24

Options during a call ...........24

Call waiting ............................24

Diverting calls........................25

Push to talk ....................................25

Settings for push to talk..... 26

Connecting to the

push to talk service..............26

Making a push

to talk call...............................27

Callback requests..................28

Using groups ..........................29

Call register and general log..... 31

Recent calls register.............31

Call duration ..........................32

Viewing the general log...... 32

GPRS data counter ............... 33

4. Writing text..............34

Using traditional text input....... 34

Using predictive text input........34

Tips for writing text.....................35

Copying text to the clipboard...36

5. Personal

information ...................37

Contacts..........................................37

Managing contacts ..............37

Adding a ringing tone.......... 38

Voice dialling .........................38

Assigning speed-

dialling keys............................ 39

r1024_en.book Page 4 Thursday, July 8, 2004 12:40 PM

Presence ..........................................40

Changing your

availability information.......40

Changing who can view your Presence

information.............................41

Updating your Presence

information.............................43

Presence settings ..................43

Positioning......................................44

Calendar ..........................................45

Creating calendar entries ...45

Calendar views.......................46

To-do ................................................46

Importing data from

compatible Nokia phones........... 47

6. Media ........................ 48

Camera.............................................48

Taking a picture or

recording a video clip ..........48

Image size and

orientation ..............................49

Camera settings.....................50

Viewing images......................51

RealPlayer™ ....................................52

Playing media files................53

Changing the settings .........54

Radio ................................................54

Tuning and saving

a radio channel......................55

Using the radio ......................55

Using the channel list.......... 56

Gallery..............................................57

Opening files ..........................58

Other default folders............58

Downloading files .................58

Uploading images

to an image server................59

7. Messaging .................60

Writing and sending

messages......................................... 61

Settings for multimedia...... 63

Settings for e-mail............... 63

Inbox - receiving messages ....... 63

Viewing multimedia

objects......................................64

Receiving smart

messages................................. 64

Receiving service

messages................................. 65

My folders ..................................... 65

Mailbox ...........................................65

Retrieving e-mail

messages from

the mailbox ............................66

Deleting e-mail

messages................................. 67

Outbox.............................................68

Viewing messages

on a SIM card ................................68

Cell broadcast................................68

Service command editor............. 69

Messaging settings ......................69

Text messages........................69

Multimedia messages.......... 70

E-mail messages ................... 71

Service messages..................73

Cell broadcast........................73

Settings for the

Other folder............................ 74

Chat.................................................. 74

Connecting to

a chat server...........................74

Modifying your

r1024_en.book Page 5 Thursday, July 8, 2004 12:40 PM

chat settings...........................75

Joining and leaving

a chat group ...........................75

Searching for chat

groups and users ...................76

Chatting in a chat group ....76

Starting and viewing

individual conversations .....77

Chat contacts.........................78

Creating a new

chat group...............................79

Chat and Presence

servers ......................................80

8. Tools .......................... 81

File manager...................................81

Receiving files

via Infrared..............................81

Viewing memory

consumption...........................81

Voice commands...........................82

Adding a voice command to

an application ........................83

Starting an application

using a voice command.......83

Replaying, erasing, or changing

a voice command..................84

9. Personalising

your phone ....................85

Profiles .............................................85

Themes.............................................86

Settings............................................87

Changing general

settings.....................................87

Phone settings .......................88

Call settings............................89

Connection settings.............90

Date and time........................93

Security....................................94

Call barring.............................96

Network...................................97

Enhancement settings......... 97

Go to ................................................98

10. Extras ......................99

Wallet .............................................99

Entering the wallet code ....99

Storing personal

card details...........................100

Creating personal notes....100

Creating a wallet profile...101 Retrieving information from the wallet to your

browser..................................102

Viewing ticket details........102

Wallet settings ....................102

Resetting the wallet and

wallet code...........................103

Calculator .....................................103

Converter ......................................103

Converting units..................104

Setting a base currency

and exchange rates............104

Notes..............................................105

Clock...............................................105

Changing clock settings....105

Setting an alarm .................105

Recorder........................................106

Memory card................................106

Formatting the memory

card.........................................107

Backing up and

restoring information ........107

r1024_en.book Page 6 Thursday, July 8, 2004 12:40 PM

Locking the memory

card ........................................107

Checking memory

consumption........................ 108

Quickword.................................... 108

Quickpoint ................................... 108

11. Services and

Applications ................ 110

Web (Mobile browser).............. 110

Basic steps for

accessing .............................. 110

Setting up the phone

for the browser service..... 110

Making a connection ........ 111

Viewing bookmarks ...........111

Browsing............................... 112

Downloading ....................... 114

Ending a connection ......... 115

Browser settings................. 115

Applications................................. 116

Downloading an

application ........................... 117

Installing an

application ........................... 117

Launching an

application ........................... 119

Memory status for

applications ......................... 120

Removing an

application ........................... 120

Games ........................................... 120

12. Connectivity .........121

Bluetooth connection............... 121

Bluetooth connection

settings..................................122

Sending data via

Bluetooth technology........122

Paired devices view............124

Receiving data via Bluetooth wireless

technology............................124

Disconnecting

Bluetooth connection........124

Infrared connection...................125

VPN.................................................126

Connection manager.................126

Viewing connection

details.....................................127

Ending connections............127

Connecting your phone to a

compatible computer ................127

Using your phone

as a modem..................................127

Remote synchronisation...........128

Creating a new

synchronisation profile .....128

Synchronising data.............129

13. Troubleshooting .. 130

Q&A................................................131

14. Battery

information ................ 135

Care and

Maintenance ............. 137

Additional safety

information ............... 138

r1024_en.book Page 7 Thursday, July 8, 2004 12:40 PM

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELLING

Do not use the phone at a refuelling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

r1024_en.book Page 8 Thursday, July 8, 2004 12:40 PM

For your safety

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press as many times as needed to clear the display and return to the start screen. Key in the emergency number, then press . Give your location. Do not end the call until given permission to do so.

■ About your device

The wireless device described in this guide is approved for use on the EGSM 900, GSM 1800 and GSM 1900 networks. Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.

■ Network Services

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These Network Services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize Network Services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use Network Services. For instance, some networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device require network support for these technologies.

r1024_en.book Page 9 Thursday, July 8, 2004 12:40 PM

For your safety

■ Shared memory

The following features in this device may share memory: contacts, text messages, and multimedia messages, images and ringing tones, video recorder, RealOne

Player

, calendar and to-do notes, and downloaded applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many images may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

r1024_en.book Page 10 Thursday, July 8, 2004 12:40 PM

General information

■ Stickers in the sales package

The stickers included on the warranty card,in the sales package, contain important information for service and customer support purposes. The sales package also includes instructions on how to use the stickers.

■ Access codes

PIN code

The PIN (Personal Identification Number, 4 to 8 digits) code helps to protect your SIM card against unauthorised use. The PIN code is usually supplied with the SIM card.

After three consecutive incorrect PIN code entries, the PIN code is blocked. If the PIN code is blocked, you need to unblock it with the PUK code before you can use the SIM card again.

PIN2 code

The PIN2 code (4 to 8 digits), supplied with some SIM cards, is required to access some functions.

Lock code

The lock code (5 digits) can be used to lock the phone and keypad to avoid unauthorised use.

The factory setting for the lock code is 12345. To avoid unauthorised use of your phone, change the lock code. Keep the new code secret and in a safe place separate from your phone.

PUK and PUK2 codes

The PUK (Personal Unblocking Key, 8 digits) code is required to change a blocked PIN code. The PUK2 code is required to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact the operator whose SIM card is in your phone for the codes.

r1024_en.book Page 11 Thursday, July 8, 2004 12:40 PM

1. Getting started

Note: Before removing the cover, always switch off the power and

disconnect the charger and any other device. Avoid touching electronic

components while changing the covers. Always store and use the device

with the covers attached.

■ Inserting a SIM card and a MultiMediaCard

1. Open the phone cover: With

the back of the phone facing you, press the locking catch in the direction of the arrow and lift the cover.

2. Open the memory card holder

by pressing it gently. Insert the SIM card into the bottom slot. Make sure the bevelled corner on the SIM card is facing towards the top of the phone and that the golden contact area on the card is facing downwards. To slide the SIM card out of the slot, move the card holder towards the battery slot.

3. Insert the MultiMediaCard (MMC)

into the holder’s slot. Make sure that the bevelled corner and golden contact area of the MMC are facing downwards.

4. Close the memory card holder by

pressing it downwards until locked.

Getting started

r1024_en.book Page 12 Thursday, July 8, 2004 12:40 PM

Getting started

5. Align the golden contacts of the battery with the corresponding connectors on the phone, and push the opposite end of the battery until it snaps into place.

6. Close the phone cover.

Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.

Use only compatible Multimedia cards (MMC) with this device. The compatible MMC for your device is Reduced Size Dual Voltage MultiMediaCard. Other memory cards, such as Secure Digital (SD) cards, do not fit in the MMC card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.

■ Charging the battery

1. Connect the power cord to the charger.

2. Connect the other end of the power cord from the charger to the base of the phone.

3. Connect the charger to an AC wall outlet. The battery indicator bar on the display starts scrolling if the fold is open, and the LED light indicator on the fold starts blinking if the fold is closed. Note that you can use the phone while charging. When the battery is fully charged, the bar stops scrolling. Disconnect the charger from the AC outlet and then from the phone. See “Battery information” on page 135.

■ Switching the phone on and off

Press and hold .

WARNING! Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

Your device has an internal antenna.

r1024_en.book Page 13 Thursday, July 8, 2004 12:40 PM

Getting started

Note: As with any other radio-

transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the phone optimises the antenna performance and the battery life.

NORMAL POSITION: Hold the phone as shown in the picture above.

If the phone requests a PIN code:

The PIN code is usually supplied with the SIM card.

• Key in the code (displayed as ****) and press .

If the phone requests a lock code:

• Key in the lock code (displayed as *****) and press .

The factory setting for the lock code is 12345.

r1024_en.book Page 14 Thursday, July 8, 2004 12:40 PM

Your phone

2. Your phone

■ Mechanical modes

Your phone has four different mechanical modes: Closed, Work, Browse, and Imaging. You switch between the modes by turning the fold and the swivel. Note that the swivel does not turn 180 degrees, but only to either left or right. Also note that there is a short time-out before a mode is activated.

Closed mode

When the phone is in the Closed mode, all applications are sent to the background, the screen is shut off, and ongoing calls are ended.

Incoming calls are indicated in Closed mode by an LED incorporated into the cover and by a ringing tone.

Note: When the phone is in the Closed mode, the keyguard will automatically be activated for Camera/PTT key, but not for Volume keys.

Work mode

When you open the phone, Work mode is activated automatically, the display is lit up and the keyboard is available. Work mode is activated even if the fold is not fully open.

Incoming calls are answered automatically when the fold is fully open.

When you are not using the camera, you can use for push to talk.

r1024_en.book Page 15 Thursday, July 8, 2004 12:40 PM

Browse mode

Browse mode is activated when you turn the screen outwards and close the fold. After this Browse mode is active even if you open the fold.

When you are not using the camera, you can use for push to talk.

Imaging mode

Imaging mode is activated when you turn the fold from Work mode so that the screen is facing either the right or the left side of the phone. If you turn the fold to the left, you are facing both the screen and the camera lens so that you can take pictures of yourself.

In Imaging mode the keyboard is disabled except for the phone’s side keys. Ongoing calls are ended when you enter Imaging mode.

Your phone

Keyguard

To activate the keyguard, press and then , or press and then Menu.

When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Key in the emergency number and press

r1024_en.book Page 16 Thursday, July 8, 2004 12:40 PM

Your phone

■ Keys and connectors

Fold open view

1. Power key

Switches the phone on and off.

When the keypad is locked, pressing the power key turns the phone’s display lights on for approximately 15 seconds.

2. Earpiece

3. Selection keys , and .

The functions of the keys depend on the guiding text shown on the display above the keys. Press to display the main Menu.

4. Scroll key

Enables scrolling through names, phone numbers, menus or settings. The scroll key is also used to move the cursor up and down, right and left when writing text, using the calendar, and in some game applications. Pressing the scroll key briefly selects the function.

5. opens a list of commands for text editing and marking items.

6. clears an entry or deletes an item and exits from different functions.

7. dials a phone number and answers a call. In standby mode it shows the list of most recently called numbers.

8. ends an active call. Exits from any function.

9. – enter numbers and characters.

and are used for various purposes in different

functions.

r1024_en.book Page 17 Thursday, July 8, 2004 12:40 PM

Fold closed view

1. Volume/Zoom keys

Adjust the volume of the earpiece or the loudspeaker, or the headset when it is connected to the phone. These keys also zoom in and out when you are using the built-in camera.

2. Loudspeakers

3. Camera/PTT key starts the camera application and activates the push to talk function.

4. LED to indicate an incoming call.

Connectors view

1. Charger connector

2. Pop-Port

connector used, for example, for headsets and the data cable.

3. Infrared (IR) port

4. Camera lens

Your phone

■ Indicators in standby mode

You have received one or several messages to the Inbox in Messaging.

You have received e-mail.

You have received one or several voice messages. See “Calling your voice mailbox” on page 22.

There are messages waiting to be sent in the Outbox.

Ringing tone has been set to Silent, Message alert tone to None,

and Chat alert tone to None in the currently active profile.

The phone’s keypad is locked. See “Keyguard” on page 15.

You have an active alarm.

r1024_en.book Page 18 Thursday, July 8, 2004 12:40 PM

Your phone

You can make calls using phone line 2 only (Network Service). See “Line in use (network service)” on page 90.

All calls to the phone are diverted. - Indicates that all calls to the phone are diverted to a voice mailbox. See “Diverting calls” on page 25. If you have two phone lines, the divert indicator for the first line is and for the second line .

A data call is active.

A fax call is active.

Shown instead of the antenna symbol (shown in the top left corner in standby mode) when there is an active GPRS connection. - Shown when the GPRS connection is put on hold during voice calls.

Bluetooth connection is active. When data are transmitted via Bluetooth wireless technology , is shown.

An infrared connection is active.

■ Menu

Press to display the main Menu. In the Menu you can access all the applications in your phone.

Options in the Menu: Open, List view/Grid view, Move, Move to

folder, New folder, App. downloads, Memory details, Help and Exit.

Moving in the Menu

• Press the scroll key on the top , bottom , left and right to navigate the Menu.

Opening applications or folders

• Scroll to an application or a folder and press the centre of the scroll key to open it.

Closing applications

•Press Back or Exit as many ti mes as needed to r eturn to standby mode or select Options→ Exit.

r1024_en.book Page 19 Thursday, July 8, 2004 12:40 PM

Switching between applications

• Press and hold to switch from one open application to another. The application switching window opens showing a list of applications that are currently open. Scroll to an application and press to go to it.

■ Actions common to all applications

• Opening items for viewing - Scroll to an item and press , or select Options→Open.

• Editing items - Open the item for viewing and select Options→Edit. Use the scroll key to scroll through all fields of the item.

• Removing, deleting items - Scroll to the item and select

Options→Delete or press . To delete many items at a time, you

first need to mark them.

• Marking an item - There are several ways to select items when you are in a list.

• To select one item at a time, scroll to the item and select

Options→ Mark/Unmark→Mark or press and at the

same time. A check mark is placed next to the item.

• To select all items in the list, select Options→Mark/Unmark→

Mark all.

• To mark multiple items, press and hold and then move the

scroll key down or up. As the selection moves, a check mark is placed next to the items. To end the selection, stop the scrolling with the scroll key and then release .

After you have selected all the items that you want, you can move or delete them by selecting Options→ Move to folder or Delete.

• Unmarking an item - Scroll to the item and select Options→Mark/

Unmark→Unmark or press and at the same time.

• Creating folders - Select Options→ New folder. You are asked to give a name to the folder (max. 35 letters).

• Moving items to a folder - Select Options→Move to folder (not shown if there are no folders available). When you select Move to

folder, a list of available folders opens and you can also see the root

Your phone

r1024_en.book Page 20 Thursday, July 8, 2004 12:40 PM

Your phone

level of the application (for moving an item out of a folder). Select the location that you want the item to be moved to and press OK.

• Sending items - Scroll to the item and select Options→Send. Select the method, the choices are Via multimedia, Via Bluetooth, Via e-

mail, Via fax and Via infrared.

• If you choose to send the item in an e-mail or a multimedia

message, an editor opens. Press to select the recipient(s) from the Contacts directory or write the phone number or e-mail address of the recipient in the To: field. Add text or sound and select Options→Send. See “Writing and sending messages” on page 61.

• Via Bluetooth. See “Sending data via Bluetooth technology” on

page 122.

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred or forwarded.

■ Volume control

Voice volume icons:

- for earpiece mode,

- for loudspeaker mode.

When you have an active call or are listening to a sound, press or

or the volume control side keys to increase or decrease the volume

level, respectively.

The loudspeaker allows you to speak and listen to the phone from a short distance without having to hold the phone to your ear, for example, having it on a table nearby. The loudspeaker can be used during a call, with sound and video applications, and when viewing multimedia messages. Sound and video applications use the loudspeaker by default. Using the loudspeaker makes it easier to use other applications during a call.

To start using the loudspeaker during an already active call, select Options→Activate loudsp.. A tone is played, is shown in the navigation bar, and the volume indicator changes.

r1024_en.book Page 21 Thursday, July 8, 2004 12:40 PM

The loudspeaker cannot be activated when you have connected a headset to the phone.

WARNING! Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

To turn off the loudspeaker when you have an active call, select

Options→Activate handset.

Your phone

+ 49 hidden pages