Microsoft RM-186 User Manual

Nokia RM-186
User Guide

FCC DRA

T

F

© 2007 Nokia. All rights reserved.

Nokia, Nokia Connecting People, Nokia Care, Navi, and Visual Radio are trademarks or registered
trademarks of Nokia Corporation. Nokia tune and Visual Radio are sound marks of Nokia Corporation.
Other product and company names mentioned herein may be trademarks or tradenames of their
respective owners.

Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form
without the prior written permission of Nokia is prohibited.

This product includes software licensed from Symbian Software Ltd © 1998-2007.
Symbian and Symbian OS are trademarks of Symbian Ltd.

US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2007. Tegic
Communications, Inc. All rights reserved.

Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems,
Inc.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and
noncommercial use in connection with information which has been encoded in compliance with the
MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use
in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be
implied for any other use. Additional information, including that related to promotional, internal, and
commercial uses, may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.

Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and
improvements to any of the products described in this document without prior notice.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA
OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL,
INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.

THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS ". EX CEPT AS REQ UIRE D BY A PPLI CABLE LAW,
NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE
RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

The availability of particular products and applications and services for these products may vary by region.
Please check with your Nokia dealer for details, and availability of language options.

This device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous
substances in electrical and electronic equipment.

Export controls

This device may contain commodities, technology or software subject to export laws and regulations from
the US and other countries. Diversion contrary to law is prohibited.

NO WARRANTY
The third-party applications provided with your device may have been created and may be owned by

FCC DRAFT

persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or
intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility
for end-user support, functionality of the applications, or the information in the applications or these
materials. Nokia does not provide any warranty for the third-party applications.

BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY
REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE
APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER
RIGHTS.

Your device may cause TV or radio interference (for example, when using a telephone in close proximity to
receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such
interference cannot be eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or modifications not expressly
approved by Nokia could void the user's authority to operate this equipment.

T

F

FCC DRA

Contents

For your safety ................................. 6

Support ............................................. 9

Help application................................................ 9

Issues with your device................................... 9

1. Get started.................................. 10

Insert a SIM card and battery .................... 10

microSD card................................................... 12

Charge the battery ........................................ 13

Switch the device on or off ........................ 13

Set time and date.......................................... 13

Normal operating position.......................... 13

Configuration settings ................................. 14

2. Your phone ................................. 15

Keys and parts ................................................ 15

Standby mode................................................. 16

Indicators ......................................................... 16

Menu ................................................................. 17

Welcome application ................................... 18

Volume control............................................... 18

Keypad lock (keyguard)................................ 18

Access codes ................................................... 19

My own key..................................................... 20

Attach a wrist strap ...................................... 20

Connect a compatible headset .................. 21

Connect a USB data cable .......................... 21

3. Call functions ............................. 21

Make a call ...................................................... 21

Answer or reject a call ................................. 23

Log ..................................................................... 24

4. Navigator .................................... 25

Navigator application................................... 27

Navigate to locations ................................... 28

Browse the map ............................................. 29

Plan trips.......................................................... 30

Extras ................................................................ 31

Transfer maps from PC................................. 31

5. Write text ................................... 32

F

C

C

Traditional text input .................................... 32

Predictive text input...................................... 32

Copy and delete text ..................................... 33

6. Messaging .................................. 33

Write and send messages ............................ 34

Inbox—receive messages.............................. 36

My folders ........................................................ 37

Mailbox ............................................................. 37

Outbox............................................................... 38

Cell broadcast ................................................. 39

Service command editor .............................. 39

Messaging settings ........................................ 39

Message reader............................................... 43

7. Contacts ..................................... 43

Manage contacts............................................ 43

Manage contact groups ............................... 44

Add a ringing tone......................................... 44

Assign speed dialing keys ............................ 44

8. Gallery ........................................ 45

Edit images ...................................................... 45

Edit video clips................................................ 46

DR

Download files ................................................ 47

9. Media.......................................... 48

Camera .............................................................. 48

Music player .................................................... 49

RealPlayer......................................................... 51

Visual Radio ..................................................... 52

10.Web ........................................... 54

Set up the phone for the browser service 55

Make a connection ........................................ 55

View bookmarks.............................................. 55

Connection security....................................... 56

Browse web pages ......................................... 56

End a connection ........................................... 58

Empty the cache............................................. 58

Browser settings............................................. 58

11.Download!................................. 60

AF

T

4

12.Organizer................................... 60

Clock.................................................................. 60

Calendar ........................................................... 61

Notes................................................................. 62

Converter.......................................................... 62

13.Applications .............................. 63

GPS data........................................................... 63

Landmarks........................................................ 64

Adobe Reader.................................................. 64

Quickoffice ...................................................... 65

14.Settings ..................................... 67

Profiles.............................................................. 67

Themes.............................................................. 68

3-D tones ......................................................... 69

Voice commands............................................ 69

Phone settings................................................ 69

Speed dial ........................................................ 78

Speech............................................................... 78

Settings wizard............................................... 79

Call mailbox .................................................... 79

Instant messaging ......................................... 79

C

F

15.Connectivity.............................. 82

PC Suite............................................................. 82

Bluetooth connection ................................... 82

USB data cable................................................ 84

Remote synchronization .............................. 85

Connection manager..................................... 86

Push to talk...................................................... 86

Data transfer ................................................... 90

16.Data manager ........................... 91

Application manager..................................... 91

File manager.................................................... 93

Device manager .............................................. 93

Memory card ................................................... 94

Activation keys................................................ 95

17.Battery information ................. 96

Charging and discharging............................ 96

Nokia battery authentication guidelines. 97

18.Enhancements .......................... 98

Care and maintenance................... 99

Additional safety information .... 100

A

R

T

F

D

C

5

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the
complete user guide for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or when it
may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while
driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless devices may be susceptible to interference, which could affect
performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the device off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Do not use the device at a refueling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the device where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do
not touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

FCC DRAFT

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible
products.

WATER-RESISTANCE

Your device is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important
information stored in your device.

6

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety
instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone function of the device is switched on and in service. Press the
end key as many times as needed to clear the display and return to the standby
mode. Enter the emergency number, then press the call key. Give your location.
Do not end the call until given permission to do so.

■ About your device

The wireless device described in this guide is approved for use on the GSM 850, 900, 1800,
and 1900 networks. Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect local customs, privacy and
legitimate rights of others, including copyrights.

Copyright protections may prevent some images, music (including ringing tones), and other
content from being copied, modified, transferred, or forwarded.

Your device supports internet connections and other methods of connectivity. Like
computers, your device may be exposed to viruses, malicious messages and applications, and
other harmful content. Exercise caution and open messages, accept connectivity requests,
download content, and accept installations only from trustworthy sources. To increase the
security of your devices, consider installing, using, and regularly updating antivirus
software, firewall, and other related software on your device and any connected computer.

Keep your device away from magnets or magnetic fields as they may cause some
applications to activate unexpectedly.

Warning: To use any features in this device, other than the alarm clock, the device
must be switched on. Do not switch the device on when wireless device use may
cause interference or danger.

The office applications support common features of Microsoft Word, PowerPoint, and Excel
(Microsoft Office 2000, XP, and 2003). Not all file formats can be viewed.

C

F

DR

C

AF

T

■ Network services

To use the phone you must have service from a wireless service provider. Many of the
features require special network features. These features are not available on all networks;
other networks may require that you make specific arrangements with your service provider
before you can use the network services. Your service provider can give you instructions and
explain what charges will apply. Some networks may have limitations that affect how you
can use network services. For instance, some networks may not support all language­dependent characters and services.

7

Your service provider may have requested that certain features be disabled or not activated
in your device. If so, these features will not appear on your device menu. Your device may
also have a special configuration such as changes in menu names, menu order, and icons.
Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some
features of this device, such as web browsing, e-mail, push to talk, instant messaging, and
multimedia messaging, require network support for these technologies.

■ Enhancements, batteries, and chargers

Check the model number of any charger before use with this device. This device is intended
for use when supplied with power from the AC-3, AC-4, AC-5, and DC-4 chargers or CA-44
charger adapter.

Warning: Use only batteries, chargers, and enhancements approved by Nokia for
use with this particular model. The use of any other types may invalidate any
approval or warranty, and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you
disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

FCC DRAFT

8

Support

■ Help application

Your device has context-sensitive help. You can access the help from an
application or from the main menu.

To access help when an application is open, select Options > Help. To switch
between help and the application that is open in the background, select and hold

Menu. Select Options and from the following options:

Topic list — to view a list of available topics in the appropriate category

Help category list — to view a list of help categories

Search by keyword — to search for help topics using keywords

To open help from the main menu, select Menu > Applications > Help. In the list
of help categories, select the desired application to view a list of help topics. To
switch between the help category list, indicated with , and a keywords list,
indicated with , scroll left or right. To display the related help text, select
it.

AF

T

DR

■ Issues with your device

If you have operational issues with your device, try the following before taking it
to a service point:

C

C

F

Reset the device

Switch the device off, remove the battery, reinsert it, and switch the device on.

Restore original factory settings

Select Menu > Settings > Phone sett. > General > Factory settings. Your
documents and files are not deleted.

Visit the Nokia support website

Visit www.nokia.com/support or your local Nokia website for product support and
FAQs. On this web site, you can also find:

• The latest version of this guide, additional information, downloads and services
related to your Nokia product.

9

• List of local Nokia contact centres, if you need to contact customer service.

• Your nearest Nokia service centres for maintenance services. Before sending
your device for repair, always back up or make a record of data in your device.

Update your device software

Nokia may produce software updates that may offer new features, enhanced functions, or
improved performance. You may be able to request these updates through the Nokia
Software Updater PC application. To update the device software, you need the Nokia
Software Updater application and a compatible PC with Microsoft Windows 2000 or XP
operating system, broadband internet access, and a compatible data cable to connect your
device to the PC.

To get more information and to download the Nokia Software Updater application, visit
www.nokia.com/softwareupdate or your local Nokia website.

If software updates over the air are supported by your network, you may also be able to
request updates through the device. See "Update software," p. 94.

Downloading software updates may involve the transmission of large amounts of data
through your service provider's network. Contact your service provider for information about
data transmission charges.

Make sure that the device battery has enough power, or connect the charger before starting
the update.

1. Get started

■ Insert a SIM card and battery

Always switch the device off and disconnect the charger before removing the battery.

This device uses BP-5M batteries.

For availability and information on using SIM card services, contact your SIM card vendor.
This may be the service provider or other vendor.

With the back of the device facing you, press the
back cover release button (1), and lift the back
cover to remove it (2).

10

FCC DRAFT

To remove the battery, lift it as shown (3).

To release the SIM card holder, gently pull the
locking clip of the card holder, and open it (4). Insert
the SIM card to the SIM card holder (5). Make sure
that the SIM card is properly inserted and that the
gold-colored contact area on the card is facing
downwards. Close the SIM card holder, and press it
until it snaps into position (6).

DR

C

Replace the battery (7).

C

F

T

AF

Press the back cover into place (8).

11

■ microSD card

Use only compatible microSD cards approved by Nokia for use with
this device. Nokia uses approved industry standards for memory
cards, but some brands may not be fully compatible with this device.
Incompatible cards may damage the card and the device and corrupt
data stored on the card.

Keep microSD cards out of the reach of small children.

You can extend the available memory with a microSD memory card. You can insert
or remove a microSD card without switching the device off.

Important: Do not remove the memory card in the middle of an operation when
the card is being accessed. Removing the card in the middle of an operation may
damage the memory card as well as the device, and data stored on the card may
be corrupted.

Insert a memory card

Note that a memory card, including a
map, may already be inserted in the
device.

1. With the back of the device facing
upward, open the memory card slot
door.

2. Place the memory card in the slot
with the gold-colored contact area
facing down. Push the card gently
to lock it into place.

3. Close the memory card slot door.

FCC DRAFT

Remove a memory card

1. Open the memory card slot door.

2. Push the card gently to release it. Wait until Remove memory card and press

'OK' is displayed. Pull the card out.

3. Close the memory card slot door.

12

■ Charge the battery

Connect the charger to a wall socket. Connect
the charger to the device.

If the battery is completely discharged, it may
take a few minutes before the charging
indicator appears on the display or before any
calls can be made.

The charging time depends on the charger and
the battery used. Charging a BP-5M battery
with the AC-4 charger takes approximately
80 minutes.

■ Switch the device on or off

Press and hold the end key.

If the device asks for a PIN code, open the slide, enter the PIN
code, and select OK.

If the device asks for the lock code, enter the lock code, and
select OK. The factory setting for the lock code is 12345.

DR

AF

T

C

C

■ Set time and date

To set the correct time zone, time, and date, select the country you are in, and
enter the local time and date.

F

■ Normal operating position

Use the device only in its normal operating position.

During extended operation, the device may feel warm. In most
cases, this condition is normal. If you suspect the device is not
working properly, take it to the nearest authorized service facility.

Your device has internal antennas.

13

Note: As with any radio transmitting

device, avoid touching an antenna
unnecessarily when the antenna is in use.
For example, avoid touching the cellular
antenna during a phone call. Contact
with a transmitting or receiving antenna
affects the quality of the radio
communication, may cause the device to
operate at a higher power level than
otherwise needed, and may reduce the
battery life.

Cellular antenna (1)
Bluetooth antenna (2)
GPS antenna (3)

■ Configuration settings

Before you can use multimedia messaging, instant messaging, push to talk,
e-mail, synchronization, streaming, and the browser, you must have the proper
configuration settings on your device. Your device may automatically configure
browser, multimedia messaging, access point, and streaming settings based on
the SIM card used. You may also receive the settings directly as a configuration
message, which you save to your device. For more information on availability,
contact your service provider or nearest authorized Nokia dealer.

When you receive a configuration message, and the settings are not automatically
saved and activated, 1 new message is displayed. Select Show to open the
message. To save the settings, select Options > Save. You may need to enter a PIN
code provided by the service provider.

FCC DRAFT

14

2. Your phone

■ Keys and parts

Light sensor (1)

Earpiece (2)

Display (3)

Left selection key (4)

Right selection key (5)

End key and power key (6), hereafter referred to as
end key

Call key (7)

Menu key (8)

Clear key (9)

Navigator key (10)

Navi™ scroll key (11), hereafter referred to as
scroll key

Number keys (12)

USB mini-B connector (13)

My own key (14)

microSD card slot (15)

Microphone (16)

Back cover release button (17)

Loudspeakers (18)

Camera slide cover (19)

Camera lens (20)

Camera flash (21)

Nokia AV connector (2.5 mm) (22)

Charger connector (23)

Volume keys (24)

Camera key (25)

C

F

DR

C

T

AF

15

■ Standby mode

When you have switched on the device, and it is registered to a network, the
device is in the standby mode and ready for use.

To change the profile, press the end key, and select a profile.

To open the list of last dialed numbers, press the call key.

To start a connection to the web, press and hold 0.

Active standby

When active standby is enabled, you can use the display for fast access to
frequently used applications. To select whether the active standby is shown, select

Menu > Settings > Phone sett. > General > Personalisation > Standby mode >

Active standby > On or Off.

To access active standby applications, scroll up or down, then scroll to the
application, and select it. In active standby the default applications are shown
across the top of the active standby area, and calendar, to-do, and player events
are listed below. To select an application or event, scroll to it, and select it.

■ Indicators

The device is connected to a GSM network.

The device is in offline mode and not connected to a cellular network.

The GPS receiver is active.

You have received one or several messages to the Inbox folder in

Messaging.

You have received new e-mail in your remote mailbox.

There are messages waiting to be sent in Outbox. See "Outbox," p. 38.

You have missed calls. See "Recent calls," p. 25.

Shown if Ringing type is set to Silent and Message alert tone and E-mail

alert tone are set to Off. See "Profiles," p. 67.

The device keypad is locked. See "Keypad lock (keyguard)," p. 18.

The loudspeaker is activated.

FCC DRAFT

16

An alarm is active.

The second phone line is being used. See Line in use in "Call," p. 74.

/

All calls to the phone are diverted to your call mailbox or to another
number. If you have two phone lines, the divert indicator is for the
first line and for the second.

A headset is connected to the device.

A loopset is connected to the device.

The connection to a Bluetooth headset has been lost.

T

/ A data call is active.

A GPRS packet data connection is active. indicates the connection is on
hold and that a connection is available.

A packet data connection is active in a part of the network that supports
EGPRS. indicates the connection is on hold and that a connection is
available. The icons indicate that EGPRS is available in the network, but
your device is not necessarily using EGPRS in the data transfer.

Bluetooth is switched on.

Data is being transmitted using Bluetooth. See "Bluetooth connection,"
p. 82.

A USB connection is active.

Other indicators may also be shown. For push-to-talk indicators, see "Push to
talk," p. 86.

■ Menu

In the menu you can access the functions in your device. To access the main menu,
select Menu.

To open an application or a folder, scroll to it by pressing the edges of the scroll
key, and press the scroll key.

C

F

DR

C

AF

17

To change the menu view, select Menu > Options > Change Menu view and a
view type.

If you change the order of the functions in the menu, the order may differ from
the default order described in this user guide.

To close an application or a folder, select Back and Exit as many times as needed
to return to the main menu, or select Options > Exit.

To display and switch between open applications, select and hold Menu. The
application switching window opens, showing a list of open applications. Scroll to
an application, and select it.

To mark or unmark an item in applications, press #. To mark or unmark several
consecutive items, press and hold #, and scroll up or down.

Leaving applications running in the background increases the demand on battery power and
reduces the battery life.

■ Welcome application

Welcome application starts when you switch on your device for the first time.

With the Welcome application, you can access the following applications:

Tutorial — Learn about the features of your device and how to use them.

Sett. wizard — Configure connection settings.

Transfer — Copy or synchronize data from other compatible devices.

To open Welcome later, select Menu > Applications > Welcome.

■ Volume control

To adjust the earpiece or loudspeaker volume during a call or when listening to an
audio file, press the volume keys.

To activate the loudspeaker during a call, select Loudspeaker.

To deactivate the loudspeaker during a call, select Handset.

Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.

FCC DRAFT

■ Keypad lock (keyguard)

To lock the keypad when the slide is closed, select Menu > Settings > Phone

sett. > General > Slide handling > Keyguard activation > On when closing slide.

See "Slide handling," p. 71.

18

When the keypad is locked and the main display light is off, to activate the main
display light, open the slide. Opening the slide also unlocks the keypad.

To unlock the keypad when the slide is closed, select Unlock and OK within

1.5 seconds. Also opening the camera lens cover unlocks the keypad.

When the keypad lock is on, calls may be possible to the official emergency number
programmed into your device.

■ Access codes

Lock code

The lock code (5 to 10 digits) helps to protect your device against unauthorized
use. The preset code is 12345. Change the code, and keep the new code secret and
in a safe place separate from your device. To change the code and to set the device
to request the code, see "Security," p. 72.

If you enter an incorrect lock code five times in succession, the device ignores
further entries of the code. Wait for 5 minutes, and enter the code again.

When the device is locked, calls may be possible to the official emergency number
programmed into your device.

DR

AF

T

PIN codes

The personal identification number (PIN) code helps to protect your SIM card
against unauthorized use. See "Security," p. 72. The PIN code is usually supplied
with the SIM card.

The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for
some functions.

The module PIN is required to access the information in the security module. The
module PIN is supplied with the SIM card if the SIM card has a security module in
it.

The signing PIN is required for the digital signature. The signing PIN is supplied
with the SIM card if the SIM card has a security module in it.

PUK codes

The personal unblocking key (PUK) code is required to change a blocked PIN code.
The PUK2 code is required to change a blocked PIN2 code.

F

C

C

19

If the codes are not supplied with the SIM card, contact your local service provider
for the codes.

Barring password

The barring password (4 digits) is required when using Call barring. See "Call

," p. 76. You can obtain the password from your service provider.

barring

If you enter an incorrect barring password three times in succession, the password
is blocked. Contact your service provider.

■ My own key

To configure the my own key to open applications such as the message reader
when pressing the key, select Menu > Settings > Phone sett. > General > My own

key > My own key, scroll to the desired application, and select it.

To give voice commands, press and hold the my own key.

To activate push to talk, press the my own key. The push to talk connection must
be started before it can be activated with the my own key. See "Push to talk," p.

86.

When push to talk is started, the my own key functions as a push-to-talk key,
overrides voice commands and the configured application, and activates push to
talk.

■ Attach a wrist strap

FCC DRAFT

20

■ Connect a compatible headset

Do not connect products that create an output signal
as this may cause damage to the device. Do not
connect any voltage source to the Nokia AV
connector.

When connecting any external device or any headset,
other than those approved by Nokia for use with this
device, to the Nokia AV connector, pay special
attention to volume levels.

■ Connect a USB data cable

To set the default mode and select

AF

whether the default mode is
activated automatically, see "USB
data cable," p. 84.

2

1

DR

C

T

3. Call functions

C

F

■ Make a call

1. In the standby mode, enter the phone number, including the area code. Press
the clear key to remove a number.

For international calls, press * twice for the international prefix (the +
character replaces the international access code), and enter the country code,
area code (omit the leading zero if necessary), and phone number.

2. To call the number, press the call key.

To adjust the volume during the call, press the volume keys.

3. To end the call, or to cancel the call attempt, press the end key.

21

To make a call from Contacts, select Menu > Contacts. Scroll to the desired name;
or enter the first letters of the name, and scroll to the desired name. To call the
number, press the call key.

To call your call mailbox (network service), press and hold 1 in the standby mode.
You must define the call mailbox number before you can call your call mailbox.
See "Call mailbox," p. 79.

To call a recently dialed number, press the call key in the standby mode. The list of
the last 20 numbers you called or attempted to call is shown. Scroll to the number
you want, and press the call key.

To make a push to talk call, see "Push to talk," p. 86.

Speed dialing

You can assign a phone number to one of the speed dialing keys, 2 to 9. See
"Assign speed dialing keys," p. 44.

Call a speed dialing number in either of the following ways:

• Press the speed dialing key, then the call key.

•If Speed dialling is set to On, press and hold the speed dialing key until the call
begins. To set Speed dialling to On, select Menu > Settings > Phone sett. >

Phone > Call > Speed dialling > On.

Voice dialing

A voice tag is added automatically to all entries in Contacts.

Use long names, and avoid similar names for different numbers.

Voice tags are sensitive to background noise. Use voice tags in a quiet environment.

Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialing in all circumstances.

1. In the standby mode, press and hold the my own key. A short tone is played,
and Speak now is displayed.

If you are using a compatible headset with the headset key, press and hold the
headset key.

2. Speak the voice command clearly. The device plays the voice command of the
best match. After 1.5 seconds, the device dials the number; if the result is not
the correct one, before dialing, scroll to another entry.

FCC DRAFT

22

Using voice commands to carry out a device function is similar to voice dialing.
See "Voice commands," p. 69.

Make a conference call (network service)

1. Make a call to the first participant.

2. To make a call to another participant, select Options > New call. The first call
is automatically put on hold.

3. To join the first participant in the conference call when the new call is
answered, select Options > Conference.

• To add a new person to the call, repeat step 2, and select Options >

Conference > Add to conference. The device supports conference calls

between a maximum of six participants, including yourself.

• To have a private conversation with one of the participants, select

Options > Conference > Private. Select a participant and Private. The

conference call is put on hold on your device. The other participants can
still continue the conference call. To return to the conference call, select

Options > Add to conference.

• To drop a participant, select Options > Conference > Drop participant,

scroll to the participant, and select Drop.

4. To end the conference call, press the end key.

DR

C

AF

T

C

■ Answer or reject a call

To answer a call, press the call key.

To determine whether calls are answered automatically when opening the slide,
select Menu > Settings > Phone sett. > General > Slide handling > Opening the

slide > Answer incoming call or Call not answered. See "Slide handling," p. 71.

To adjust the volume during the call, press the volume keys.

To mute the ringing tone, select Silence.

Tip: If a compatible headset is connected to the device, press the headset
key to answer and end a call.

To reject the call, press the end key. The caller hears a line busy tone. If you have
activated the call divert option If busy to divert calls, rejecting the call diverts the
call.

F

23

To send a text message to inform the caller as to why you cannot answer the call,
select Options > Send text message. You can edit the text before you send it. See

Reject call with SMS and Message text in "Call," p. 74.

Note that when a headset is connected, the slide call handling settings are not in
use.

Call waiting (network service)

During a call, to answer the waiting call, press the call key. The first call is put on
hold. To end the active call, press the end key.

To activate the call waiting function, select Menu > Settings > Phone sett. >

Phone > Call > Call waiting > Activate.

To switch between the two calls, select Swap.

Options during a call

Many of the options that you can use during a call are network services. For
availability, contact your service provider.

Select Options during a call for some of the following options:

Transfer — to connect a call on hold to an active call and disconnect yourself

Replace — to end an active call and replace it by answering the waiting call

Send DTMF — to send DTMF tone strings (for example, a password). Enter the

DTMF string or search for it in Contacts. To enter a wait character (w) or a pause
character (p), press * repeatedly. To send the tone, select OK.

Tip: You can add DTMF tones to the phone number or DTMF fields in a
contact card.

FCC DRAFT

■ Log

In the log, you can monitor phone calls, text messages, packet data connections,
and fax and data calls registered by the device.

Connections to your remote mailbox, multimedia messaging center, or browser
pages are shown as data calls or packet data connections in the general
communications log.

Note: The actual invoice for calls and services from your service provider may vary,
depending on network features, rounding off for billing, taxes, and so forth.

24

Note: Some timers, including the life timer, may be reset during service or

software upgrades.

Recent calls

The device registers the phone numbers of missed, received, and dialed calls, and
the approximate duration of your calls. The device registers missed and received
calls only if the network supports these functions, and the device is switched on
and within the network service area.

To view recent calls (network service), select Menu > Log > Recent calls and a call
type.

To clear all recent call lists in the Recent calls view, select Options > Clear recent

calls. To clear only one of the call registers, open the register you want to erase,

and select Options > Clear list.

General log

To view the general log, select Menu > Log, and scroll right.

To filter the log, select Options > Filter and the filter type.

To erase all the log contents permanently, select Options > Clear log > Yes.

DR

AF

T

C

4. Navigator

C

F

Your device has an internal GPS receiver that receives low­power radio signals from satellites, and measures the travel
time of the signals. From the travel time, the GPS receiver
can calculate its location to within a few meters. The
coordinates are expressed in degrees and decimal degrees
format using WGS-84 coordinate system.

The GPS receiver is located in the upper right corner of the
slide cover. When using the receiver, hold the device upright
in your hand with an orientation toward the sky.

Note that establishing a GPS connection may take several
minutes.

25

As availability of GPS related services depends on wireless environment and
systems, the services may not fuction in all environments at all times. In case of
sudden loss of GPS reception, press the Navigator key to restart the application.

Your device also supports Assisted GPS (A-GPS) service which helps determining
the location faster. It utilises packet data connection, and your network operator
may charge you for this according to your network subscription. Contact your
service provider for the correct internet access point and charges related to the
service.

Your device is preconfigured to use the Nokia A-GPS service if no service provider
specific A-GPS settings are available. The assistance data is retrieved from the
Nokia A-GPS service server only when needed.

When you start the GPS function for the first time, you need to define or select an
access point to take A-GPS into use. After this, A-GPS is used automatically when
needed unless the A-GPS method is disabled. For example, the A-GPS service will
be contacted automatically if the integrated GPS has been switched off for more
than two hours.

To enable or disable different positioning methods, such as the A-GPS, select

Menu > Settings > Phone sett. > General > Positioning methods, scroll to the

positioning method, and select Options > Enable or Disable.

The Global Positioning System (GPS) is operated by the government of the United States,
which is solely responsible for its accuracy and maintenance. The accuracy of location data
can be affected by adjustments to GPS satellites made by the United States government and
is subject to change with the United States Department of Defense civil GPS policy and the
Federal Radionavigation Plan. Accuracy can also be affected by poor satellite geometry.
Availability and quality of GPS signals may be affected by your location, buildings, natural
obstacles, and weather conditions. The GPS receiver should only be used outdoors to allow
reception of GPS signals.

Any GPS should only be used as a navigation aid. It should not be used for precise location
measurement and you should never rely solely on location data from the GPS or A-GPS
receiver for positioning or navigation.

Almost all digital cartography is inaccurate and incomplete to some extent. Never rely solely
on the cartography provided for use in this device.

This feature is not designed to support positioning requests for related calls. Contact your
service provider for more information about how your phone complies with government
regulations on location based emergency calling services.

If your device cannot find the satellite signal, consider the following:

• If you are indoors, go outdoors to receive a better signal.

FCC DRAFT

26

• If you are outdoors, move to a more open space.

• Check that your hand does not cover the GPS antenna of your device.

• If the weather conditions are bad, in such a case the signal strength may also
be affected.

• Establishing a GPS connection may take several minutes.

■ Navigator application

To start the Navigator application, press the Navigator key, or select Menu >

Navigator.

With the Navigator application, you can navigate, search places and routes, and
plan trips. You receive voice guidance and visual travel instructions with the map
turn-by-turn during your trip.

When you launch the Navigator application, it zooms to the last known position
and displays Getting position until the GPS receiver is able to calculate your
position.

AF

T

Navigator key

You can use the Navigator key as a shortcut to different functions depending on
the state of the Navigator application when you press the key.

• If the Navigator application is not running, the Navigator key starts the
application.

• If the Navigator application is on the display but not showing the current
position, the Navigator key moves the map to current position.

• If the Navigator application is in the foreground showing the current position,
the Navigator key opens the navigation function.

• If the Navigator application is running in the background, the Navigator key
brings the application to the display and goes to the GPS position on map.

Keypad shortcuts in the Navigator application

1 — Open the Search view.

2 — Change view layout.

3 — Toggle between Day colors and Night colors.

4 — Show or hide the progress bar (only when navigating).

C

F

DR

C

27

5 — Show or hide the GPS information view.

6 — Toggle between 2-D and 3-D perspective.

7 — Open the Free text search view.

8 — Zoom to the entire map.

9 — Toggle between sound on and off.

0 — Repeat the previous voice instruction (only when navigating).

* or # — Zoom in or out on the map. The minimum is street level and the maximum

is the globe.

To move on the map, scroll left, right, up, or down.

■ Navigate to locations

To define a travel mode in the Navigator application, select Options > Travel mode
and As fast as possible, As short as possible or Pedestrian. To define more detailed
travel conditions, select Options > Settings > Navigation. Travel mode can be
changed at any time during navigation.

Navigate to a destination

1. In the Navigator application, select Options > Navigate and a navigation
option. For example, to search an address, select Address; or to search a point­of-interest (POI), select Nearby.

You can also search for a destination in the map view by scrolling the cursor to
the desired destination. .

2. To start navigating, select the destination from the list of results or from the
map view, and select Navigate to.

If navigation is in progress and you want to start a new one, select Yes when
the confirmation query is asked. To continue a previous navigation and return
to the map view, select No.

3. To stop the current navigation, press the clear key, or select Options > Stop

navigation > Yes to the confirmation query. To continue the navigation, select
No.

To add a waypoint to a navigation in progress:

1. Search and select a waypoint from the list of results or from the map view.

2. Select Navigate via. If there is no intermediary waypoint defined for the trip,
the navigation continues automatically.

28

FCC DRAFT

If an intermediary waypointhas been defined, a confirmation query is
displayed. To continue the navigation with the new waypoint, select Yes, or to
continue the navigation with the old waypoint, select No.

Alarms

To receive a visual or acoustic alarm when approaching a certain location, select

Options > Settings > Alarm and the category to which the location belongs. For

example, select Points-of-interest and mark the the desired subcategories.

Set road blocks

To avoid a certain part of the planned route when navigating, select Options >

Define road block and the distance for which you want to set the road block.

To define the part to be avoided in the Route description view, select Select from

list.

■ Browse the map

When not navigating, you can use the Navigator application to browse the map,
and search places and locations (for example, by address). A GPS signal is not
required when browsing the map.

View location information

To view a searched item and information about it on the map view, select the item
from the list and Show on map.

Information can also be viewed by scrolling to the desired location on the map,
selecting it and Show information.

To call to a number of a selected location, select Call. To use the call function,
select the item from the list of search results or in the map view.

C

F

DR

C

AF

T

Send and save location information

To send location data (such as a map as an image), route itinerary, or your current
GPS position to a compatible device, select Options > Send and the data to be
sent. The information channel depends on the data, for example, a map as an
image can be sent as a multimedia or e-mail message or through a Bluetooth
connection.

29

To send your cursor position on the map to a compatible device, for example as an
SMS or MMS, select it and Send cursor position > Via text message or Via

multimedia.

To save data, such as current GPS or cursor position to your device, select

Options > Save and the data to be saved.

You can add a location, for example, a cursor position, in Contacts. Select Save

cursor position > New contact.

■ Plan trips

1. In the Navigator application, select Options > Trips > Plan new route. Enter the
route name, and select Save.

2. Select Departure > Set departure to search, and select the departure point of
the trip.

3. Select Destination > Set destination to search, and select the destination point
of the trip.

4. To add waypoints to your route, select Options > Add waypoint, and search
and select the waypoint to be added.

5. To start the trip, select Options > Start navigation and the first visit of the trip.

If navigation is in progress and you want to start a new navigation, a
confirmation is asked. To abort the ongoing navigation and start the new trip,
select Yes. To continue the previous navigation, select No.

To change the order of the waypoints, select the waypoint to be moved, Options >

Move, and the direction to which you want to move the waypoint.

FCC DRAFT

Settings

To change the Navigator application settings, select Options > Settings and the
feature you wish to modify. For example, to choose specific points-of-interest to
be displayed on the map, select Map > Show points-of-interest and the desired
categories.

To configure the behaviour of voice instructions during a phone call, select

Navigation > Call handling > Dim instructions to set the voice instructions to a

lower level than the phone conversation, Call and instructions to have the voice
instructions and telephone conversation on the same volume level, or Beep for

instruction to replace the voice instructions with a beep.

30

For detailed information about the settings, see the Navigator help. To access the
help, select Settings > Options > Help.

■ Extras

To complement your device, download maps from the internet to your PC and use
the Nokia Map Manager application (an add-on application to PC Suite) to
transfer the maps from your PC or a DVD to a memory card in your device, see
"Transfer maps from PC", p. 31.

You can also use the Navigator application to download smaller amounts of data,
such as travel guides and traffic and weather information to a memory card in
your device. Before you can use the maps or other contents, you must purchase
licenses, for example, with the Navigator application.

In case of problems with purchased contents, try synchronising the licenses.
Select Extras > Options > Synchronise license keys.

Extra services are provided by a third-party service provider. Availability depends
on the country, operator, and local legislation.

AF

T

■ Transfer maps from PC

The requirements of the PC for map transfer are as follows:

• Microsoft Windows XP operating system (or later)

• Nokia PC Suite 6.82 or later

• Nokia Map Manager application (an add-on to PC Suite)

To transfer maps between a PC and a memory card, for example, when copying
memory card contents to a new memory card, use Nokia Map Manager. Connect
your device to a PC with a compatible USB cable, and select PC Suite as the
connection mode.

To change the default USB connection mode, select Menu > Settings >

Connectivity > USB > USB mode.

Nokia Map Manager is optimized for transferring map files. For information about
transferring maps with Nokia Map Manager, see the Nokia Map Manager help.

C

F

DR

C

31

5. Write text

When you write text, appears on the top right of the display, indicating
predictive text input, or appears, indicating traditional text input. To set the
predictive text input on or off when writing text, press # repeatedly until the
desired mode is active.

, , or is displayed next to the text input indicator, indicating

the character case. To change the character case, press #.

indicates the number mode. To change between letter and number mode,

press # repeatedly until the desired mode is active.

■ Traditional text input

Press a number key, 1 to 9, repeatedly until the desired character appears. Not all
characters available under a number key are printed on the key. The availability of
characters depends on the selected writing language. See Writing language in
"Language," p. 70.

If the next letter you want is on the same key as the present one, wait until the
cursor appears (or scroll forward to end the time-out period), and enter the letter.

To insert a number, press and hold the number key.

The most common punctuation marks and special characters are available under
the 1 key. For more characters, press and hold *.

To erase a character, press the clear key. To erase more characters, press and hold
the clear key.

To insert a space, press 0. To move the cursor to the next line, press 0 three times.

FCC DRAFT

■ Predictive text input

To enter any letter with a single keypress, use predictive text input. To activate
predictive text input, press # repeatedly until appears. This activates
predictive text input for all editors in the device.

1. To write the desired word, press the keys 2–9. Press each key only once for one
letter. The word changes after every keypress.

For the most common punctuation marks, press 1. For more punctuation marks
and special characters, press and hold *.

32

To erase a character, press the clear key. To erase more characters, press and
hold the clear key.

2. When you have finished the word and it is correct, to confirm it, scroll forward
or insert a space.

If the word is not correct, to view the matching words the dictionary has found
one by one, press * repeatedly.

If the ? character is shown after the word, the word you intended to write is
not in the dictionary. To add a word to the dictionary, select Spell. Enter the
word (up to 32 letters) using traditional text input, and select OK. The word is
added to the dictionary. When the dictionary becomes full, a new word
replaces the oldest added word.

Write compound words

Write the first half of a compound word, and scroll forward to confirm it. Write
the last part of the compound word, and to complete the compound word, press 0
to add a space.

AF

T

■ Copy and delete text

1. To select letters and words, press and hold #, and at the same time scroll left or
right. As the selection moves, text is highlighted. To select lines of text, press
and hold #, and at the same time scroll up or down.

2. To copy the text to the clipboard, press and hold #, and at the same time select

Copy.

If you want to delete the selected text, press the clear key.

3. To insert the text, scroll to the insertion point, press and hold #, and at the
same time select Paste.

6. Messaging

To open the Messaging menu, select Menu > Messaging. You can see the New

message function and a list of default folders:

Inbox — contains received messages except e-mail and cell broadcast
messages. E-mail messages are saved in the Mailbox folder. To read cell broadcast
messages, select Options > Cell broadcast.

C

F

DR

C

33

My folders — for organizing your messages into folders

Mailbox — for connecting to your remote mailbox to retrieve your new e-mail
messages or viewing your previously retrieved e-mail messages offline. After you
define settings for a new mailbox, the name given to that mailbox is displayed
instead of Mailbox.

Drafts — saves draft messages that have not been sent

Sent — saves the messages that are sent, excluding messages sent using
Bluetooth. See Save sent messages in "Other settings," p. 42.

Outbox — temporarily saves the messages waiting to be sent

Reports (network service) — saves the delivery reports of the text messages,
special message types such as business cards, and multimedia messages you have
sent. Receiving a delivery report of a multimedia message that has been sent to an
e-mail address may not be possible.

■ Write and send messages

The wireless network may limit the size of MMS messages. If the inserted picture exceeds
this limit, the device may make it smaller so that it can be sent by MMS.

Your device supports the sending of text messages beyond the character limit for a single
message. Longer messages are sent as a series of two or more messages. Your service
provider may charge accordingly. Characters that use accents or other marks, and characters
from some language options, take up more space, limiting the number of characters that can
be sent in a single message.

Only devices that have compatible features can receive and display multimedia messages.
The appearance of a message may vary depending on the receiving device.

Before you can send and receive an SMS message, a multimedia message, or an
e-mail, or connect to your remote mailbox, you must have the correct connection
settings in place. See "Messaging settings," p. 39.

1. To create a message, select Menu > Messaging > New message and the

message type.

To create an audio message, see "Nokia Xpress audio messaging," p. 35.

2. Select the recipients or groups from Contacts, or enter the phone number or e-

mail address of the recipient in the To field. Separate recipients with a
semicolon (;).

3. When creating an e-mail or multimedia message, scroll down to the subject

field, and write the message subject.

FCC DRAFT

34

4. Scroll down to move to the message field.

5. Write the message.

When writing text messages, the message length indicator shows how many
characters you can enter in the message. For example, 10 (2) means that you
can still add 10 characters for the text to be sent as two separate text
messages.

To use a template for the text message, select Options > Insert > Template. To
create a presentation based on a template to be sent as a multimedia message,
select Options > Create presentation. To use a text template for the
multimedia message, select Options > Insert object > Template.

To add a media object to a multimedia message, select Options > Insert

object > Image, Sound clip, or Video clip. To create and add a new media

object, select Options > Insert new > Image, Sound clip, Video clip or Slide.
When sound is added, is shown.

To add a media object to an e-mail, select Options > Insert > Image, Sound

clip, Video clip, Note or Template.

6. To send the message, select Options > Send.

AF

T

DR

Nokia Xpress audio messaging

Audio messages are multimedia messages that consist of a single sound clip. To
create and send an audio message do the following:

1. Select Menu > Messaging > New message > Audio message.

2. In the To field, select the recipients from Contacts, or enter the phone number

or e-mail address. Scroll down to the message field.

3. To record a new sound clip, select Options > Insert sound clip > New sound

clip. The recording will start.

To use a previously recorded sound clip, select Options > Insert sound clip >

From Gallery, scroll to the sound clip, and select it. The sound clip has to be in

.amr format.

To play the sound clip , select Options > Play sound clip.

4. To send the message, select Options > Send.

F

C

C

35

E-mail settings

Before you can send, receive, retrieve, reply to, and forward e-mail to a separate
e-mail account, you must configure an internet access point (IAP) and define your
e-mail settings correctly, see "Connection," p. 76 and "E-mail settings," p. 41.

Follow the instructions given by your e-mail service provider and internet service
provider.

■ Inbox—receive messages

Select Menu > Messaging > Inbox.

When there are unread messages in the inbox, the icon changes to .

To open a received message, select Menu > Messaging > Inbox and the desired
message.

Important: Exercise caution when opening messages. Multimedia message
objects may contain malicious software or otherwise be harmful to your device or
PC.

View multimedia objects

To view the list of media objects that are included in the multimedia message,
open the message, and select Options > Objects. You can save the file in your
device or send it using Bluetooth technology or as a multimedia message to
another compatible device.

Special message types

Your device can receive many kinds of messages, such as operator logos, business
cards, calendar entries, and ringing tones.

To open a received message, select Menu > Messaging > Inbox and the desired
message. You can save the special message content to your device. For example,
to save a received calendar entry to the calendar, select Options > Save to

Calendar.

Note: The picture message function can be used only if it is supported by your
service provider. Only compatible devices that offer picture message features can
receive and display picture messages. The appearance of a message may vary
depending on the receiving device.

36

FCC DRAFT

Service messages

Service messages (network service) are notifications (for example, news
headlines) that may contain a text message or the address of a browser service.
For availability and subscription, contact your service provider.

■ My folders

You can organize your messages into folders, create new folders, and rename and
delete folders.

Select Menu > Messaging > My folders. To create a folder, select Options > New

folder, and enter a name for the folder.

T

■ Mailbox

Select Menu > Messaging > Mailbox. Connect to mailbox? is displayed. Select Yes
to connect to your mailbox (network service) or No to view previously retrieved
e-mail messages offline.

To connect to the mailbox afterwards, select Options > Connect.

When you create a new mailbox, the name you give to the mailbox replaces

Mailbox. You can have up to six mailboxes.

When you are online, to end the data connection to the remote mailbox, select

Options > Disconnect.

Retrieve e-mail messages from the mailbox

Important: Exercise caution when opening messages. E-mail messages may

contain malicious software or otherwise be harmful to your device or PC.

C

F

DR

C

AF

1. Select Menu > Messaging > Mailbox > Options > Connect.

2. Select Options > Retrieve e-mail and from the following options:

New — to retrieve all new e-mail messages to your device

Selected — to retrieve only the e-mail messages that have been marked

All — to retrieve all messages from the mailbox

3. After you have retrieved the e-mail messages, you can continue viewing them

online. Select Options > Disconnect to close the connection and to view the
e-mail messages offline.

37

4. To open an e-mail message, select it. If the e-mail message has not been

retrieved and you are offline and select Open, you are asked if you want to
retrieve this message from the mailbox.

To view e-mail attachments, indicated with , select Options > Attachments.
You can retrieve, open, or save attachments in supported formats.

Delete e-mail messages

To delete an e-mail from the device while still retaining it in the remote mailbox,
select Options > Delete > Phone only. The e-mail header stays in your device. To
remove the header as well, delete the e-mail message from your remote mailbox
first, then connect your device to the remote mailbox to update the status.

To delete an e-mail from the device and the remote mailbox, select Options >

Delete > Phone and server.

To cancel deletion of an e-mail from both the device and server, scroll to an e-mail
that has been marked to be deleted during the next connection, and select

Options > Restore.

■ Outbox

The outbox folder is a temporary storage place for messages that are waiting to be
sent.

To access the outbox folder, select Menu > Messaging > Outbox. Message
statuses are as follows:

Sending — The device is sending the message.

Waiting or Queued — The device is waiting to send messages or e-mail.

Resend at ... — Sending failed. The device tries to send the message again after a

time-out period. To retry sending the message immediately, select Options >

Send.

Deferred — To set documents to be on hold while they are in the outbox folder,

scroll to a message that is being sent, and select Options > Defer sending.

Failed — The maximum number of sending attempts has been reached.

FCC DRAFT

38

■ Cell broadcast

You may be able to receive messages on various topics, such as weather or traffic
conditions from your service provider (network service). To turn on the service, see

Cell broadcast in "Cell broadcast settings," p. 42.

Select Menu > Messaging > Options > Cell broadcast.

A packet data connection may prevent cell broadcast reception.

■ Service command editor

To enter and send service commands (also known as USSD commands) such as
activation commands for network services to your service provider, select Menu >

Messaging > Options > Service command. To send the command, select
Options > Send.

T

■ Messaging settings

Text message settings

Select Menu > Messaging > Options > Settings > Text message and from the
following options:

Message centres — lists all the defined message centers

Message centre in use — defines which message center is used for delivering text

messages and special message types such as business cards

Character encoding > Full support — to select all characters in the message to be

sent as viewed. If you select Reduced support, characters with accents and other
marks may be converted to other characters.

Receive report (network service) — When set to Yes, the status of the sent message

(Pending, Failed, Delivered) is shown in Reports.

Message validity — If the recipient of a message cannot be reached within the

validity period, the message is removed from the message service center. Note
that the network must support this feature.

Message sent as — to define how the message is sent. The default is Text.

Preferred connection — You can send text messages using the normal GSM

network or packet data if supported by your network.

C

F

DR

C

AF

39

Reply via same centre (network service) — If you select Yes , and the recipient

replies to your message, the return message is sent using the same message
service center number. All networks do not provide this option.

Multimedia messaging settings

Select Menu > Messaging > Options > Settings > Multimedia message and from
the following options:

Image size — Define the size of the image in a multimedia message. If you select
Original, the image is not scaled.

MMS creation mode — If you select Guided, the device informs you if you try to

send a message that may not be supported by the recipient. To set the device to
prevent you from sending messages that are not supported, select Restricted. If
you select Free, message creation is not restricted, but the recipient may not be
able to view your message.

Access point in use — Select which access point is used as the preferred

connection for multimedia messaging.

Multimedia retrieval — To receive multimedia messages only when you are in your

home network, select Auto in home netw.. To always receive multimedia messages,
select Always automatic. To retrieve messages manually, select Manual. To not
receive any multimedia messages or advertisements, select Off.

Allow anon. msgs. — To reject messages coming from an anonymous sender, select
No.

Receive adverts — Define whether you want to allow reception of multimedia

message advertisements.

Receive report — If you want the status of the sent message (Pending, Failed, or
Delivered) to be shown in Reports, select Yes. Receiving a delivery report of a

multimedia message that has been sent to an e-mail address may not be possible.

Deny report sending > Yes — to deny sending delivery reports

Message validity (network service) — If the recipient of a message cannot be

reached within the validity period, the message is removed from the multimedia
message center.

FCC DRAFT

40

E-mail settings

Mailbox settings

Select Menu > Messaging > Options > Settings > E-mail > Mailboxes and a
mailbox.

If no mailbox settings have been defined before, you are asked if you want to
define the settings.

Connection settings > Incoming e-mail and Outgoing e-mail — To defi ne t he

correct settings, contact your e-mail service provider.

User settings

Select User settings and from the following settings:

My name — Enter the name to be displayed in outgoing e-mail.

Send message (network service) — To set when your e-mail messages are sent,

select Immediately or During next conn..

Send copy to self — Select Yes to send a copy of the e-mail to the address defined

in My e-mail address.

Include signature — Select Yes to attach a signature to your e-mail messages and

to create or edit a signature text.

New e-mail alerts — To not receive alerts about new e-mail, select Off.

Retrieval settings

Select Retrieval settings and from the following settings:

E-mail to retrieve — To only retrieve headers, select Headers only. To limit how

much data is retrieved, select Size limit, and enter the maximum amount of data
per message in kilobytes. To retrieve messages and attachments, select Msgs. &

attachs.. Size limit and Msgs. & attachs. are only available with POP3 mailboxes.

Retrieval amount — To limit the number of messages to retrieve from the inbox of

the remote mailbox, select From Inbox > No. of e-mails and enter the maximum
number of messages to retrieve. You can also limit the number of messages to
retrieve from other subscribed folders in From folders (only IMAP4 mailboxes).

IMAP4 folder path (only IMAP4 mailboxes) — Define the folder path for IMAP4

mailboxes.

Folder subscriptions (only IMAP4 mailboxes) — Select the mailbox folders you

want to subscribe to. To subscribe to or unsubscribe from a folder, scroll to it, and
select Options > Subscribe

C

F

or Cancel subscription.

DR

C

AF

T

41

Automatic retrieval

Select Automatic retrieval and from the following settings:

E-mail notifications — To automatically retrieve the headers to your device when

you receive a notification of new e-mail in your remote mailbox, select Auto-

update or Only in home netw..

E-mail retrieval — To have e-mail headers automatically retrieved at set intervals,

select Enabled, or if you only want headers to be retrieved in your home network,
select Only in home netw.. Headers can be automatically retrieved for two
mailboxes at most. You can set on which days, at what times, and how frequently
the headers are retrieved in Retrieval days, Retrieval hours, and Retrieval interval.

E-mail notifications and E-mail retrieval cannot be active at the same time.

Service message settings

Select Menu > Messaging > Options > Settings > Service message and from the
following settings:

Service messages — Allow or deny the reception of service messages.

Download messages — Download messages automatically or manually.

Cell broadcast settings

Check with your service provider whether cell broadcast (network service) is
available and what the available topics and related topic numbers are.

Select Menu > Messaging > Options > Settings > Cell broadcast and from the
following settings:

Reception — Select On or Off.

Language — Select in which languages cell broadcast messages are received.

Topic detection — To automatically save previously unknown topic numbers in

received cell broadcast messages, select On.

FCC DRAFT

Other settings

Select Menu > Messaging > Options > Settings > Other and from the following
settings:

Save sent messages — Select to save a copy of every sent text message,

multimedia message, or e-mail to the Sent folder.

42

Number of saved msgs. — Define how many sent messages are saved to the sent

items folder at a time. When the limit is reached, the oldest message is deleted.

Memory in use — Select whether to save messages to the device memory or

memory card.

■ Message reader

With Message reader, you can listen to received text, multimedia, and e-mail
messages.

To listen to a message in Inbox or Mailbox, scroll to the message or mark the
messages, and select Options > Listen. To skip to the next message, scroll down.

Tip: When 1 new message or 1 new e-mail is displayed in the standby
mode, to listen to the received messages, press and hold the left selection
key until Message reader starts.

T

AF

7. Contacts

■ Manage contacts

Select Menu > Contacts.

To add a new contact, select Options > New contact. Fill in the fields you want,
and select Done.

To edit a contact, scroll to it, and select Options > Edit.

To assign default numbers and addresses to a contact, select it, and select

Options > Defaults. Scroll to the desired default option, and select Assign.

To copy names and numbers from a SIM card to your device, select Options > SIM

contacts > SIM directory. Scroll to the names you want to copy, mark the desired

names, and select Options > Copy to Contacts.

To copy a phone, fax, or pager number from contacts to your SIM card, scroll to
the contact you want to copy, and select Options > Copy > To SIM directory.

To view the list of fixed dialing numbers, select Options > SIM contacts > Fixed

dial contacts. This setting is only shown if supported by your SIM card.

C

F

DR

C

43

■ Manage contact groups

Create a contact group so that you can send text or e-mail messages to several
recipients at the same time.

1. Scroll to the right, and select Options > New group.

2. Enter a name for the group.

3. Select the group and Options > Add members.

4. Mark the contacts you want to add to the group, and select OK.

■ Add a ringing tone

You can set a ringing tone (and a video ringing tone) for each contact and group.

1. Select Menu > Contacts.

2. To add a ringing tone to a contact, select the contact, Options > Ringing tone,

and the desired ringing tone.

To add a ringing tone to a group, scroll right to the groups list, and scroll to a
contact group. Select Options > Ringing tone and the ringing tone for the
group.

To remove the personal or group ringing tone, select Default tone as a ringing
tone.

■ Assign speed dialing keys

You can assign a phone number to the speed dialing keys, 2 to 9. The 1 key is
reserved for the call mailbox. Speed dialing has to be activated before using speed
dialing. See Speed dialling in "Call," p. 74.

1. Select Menu > Contacts and a contact.

2. Scroll to a number, and select Options > Assign speed dial. Scroll to the desired

speed dialing key, and select Assign. When you return to the contact
information view, next to the number indicates the assigned speed dial.

To call the contact by speed dialing, in the standby mode, press the speed dialing
key and the call key, or press and hold the speed dialing key.

FCC DRAFT

44

8. Gallery

Use Gallery to store and organize your images, video clips, music tracks, sound
clips, track lists, streaming links, .ram files, and presentations.

Select Menu > Gallery and a folder.

To set an image as your wallpaper, select Images and the desired image. Select

Options > Use image > Set as wallpaper. To assign the image to a contact, select

Assign to contact.

To set a video as a video ringing tone, select Video clips and the desired video.
Select Options > Use video > Set as ringing tone. To assign the video for a contact,
select Assign to contact.

To copy files to device memory or to the memory card, scroll to the file or mark the
files, and select Options > Organise > Copy to phone mem. or Copy to memory

card.

To create image folders and move images to them, select Images, scroll to an
image, select Options > Organise > New folder, and enter a name for the folder.
Mark the images you want to move to the folder, and select Options > Organise >

Move to folder and the folder.

DR

AF

T

C

■ Edit images

To edit images in Gallery, scroll to the image, and select Options > Edit.

To crop an image, select Options > Apply effect > Crop. To crop the image size
manually, select Manual or a predefined aspect ratio from the list. If you select

Manual, a cross appears in the upper left corner of the image. Scroll to select the

area to crop, and select Set. Another cross appears in the lower right corner. Again
select the area to be cropped. To adjust the first selected area, select Back. The
selected areas form a rectangle, which forms the cropped image.

If you selected a predefined aspect ratio, select the upper left corner of the area to
be cropped. To resize the highlighted area, use the scroll key. To freeze the
selected area, press the scroll key. To move the area within the picture, scroll. To
select the area to be cropped, press the scroll key.

To reduce red eye in an image, select Options > Apply effect > Red eye reduction.
Move the cross onto the eye, and press the scroll key. A loop appears on the
display. To resize the loop to fit the size of the eye, scroll up, down, left, or right. To
reduce the redness, press the scroll key.

C

F

45

Shortcuts in the image editor are as follows:

• To view an image in the full screen, press *. To return to the normal view, press *

again.

• To rotate an image clockwise or counterclockwise, press 3 or 1.

• To zoom in or out, press 5 or 0.

• To move on a zoomed image, scroll up, down, left, or right.

■ Edit video clips

To edit video clips in Gallery and create custom video clips, scroll to a video clip,
and select Options > Video editor.

In the video editor you can see two timelines: video clip timeline and sound clip
timeline. The images, text, and transitions added to a video clip are shown on the
video clip timeline. To switch between the timelines, scroll up or down.

Modify video

To modify the video, select from the following options:

Edit video clip:

Cut — trims the video clip in the cut video clip view.

Add colour effect — inserts a color effect on the video clip.

Use slow motion — slows the speed of the video clip.

Mute sound or Unmute sound — mutes or unmutes the original video clip sound.

Move — moves the video clip to the selected location.

Remove — removes the video clip from the video.

Duplicate — makes a copy of the selected video clip.

Edit text (shown only if you added text) — to move, remove, or duplicate text;

change the color and style of the text; define how long it stays on the screen; and
add effects to the text.

Edit image (shown only if you added an image) — to move, remove, or duplicate an

image; define how long it stays on the screen; and set a background or a color
effect to the image.

Edit sound clip (shown only if you have added a sound clip) — to cut or move the

sound clip, to adjust its length, or to remove or duplicate the clip.

FCC DRAFT

46

Edit transition — There are three types of transitions: at the start of a video, at the

end of a video, and transitions between video clips. You can select start transition
when the first transition of the video is active.

Insert — Select Video clip, Image, Text, Sound clip, or New sound clip.

Movie — Preview the movie in the full screen or as a thumbnail, save or send the

movie, or cut the movie to a proper size for sending it in a multimedia message.

To take a snapshot of a video clip, in the cut video view, select Options > Take

snapshot. In the thumbnail preview view, press the scroll key, and select Take
snapshot.

To save your video, select Options > Movie > Save. To define the Memory in use,
select Options > Settings.

To send the video, select Send > Via multimedia, Via e-mail, or Via Bluetooth.
Contact your service provider for details of the maximum multimedia message
size that you can send. If your video is too large to send in a multimedia message,

appears.

Transfer videos from PC

To transfer videos use a compatible USB cable or Bluetooth connectivity.

The requirements of the PC for video transfer are as follows:

• Microsoft Windows XP operating system (or later)

• Nokia PC Suite 6.82 or later

• Nokia Video Manager application (an add-on application to PC Suite)

If you connect the USB cable to transfer videos, use Nokia Video Manager in Nokia
PC Suite, and select PC Suite as the connection mode.

To change the default USB connection mode, select Menu > Settings >

Connectivity > USB > USB mode.

Nokia Video Manager in Nokia PC Suite is optimized for transcoding and
transferring video files. For information about transferring video with Nokia Video
Manager, see the Nokia Video Manager help.

C

F

DR

C

AF

T

■ Download files

Select Menu > Gallery, the folder for the file type you want to download, and the
download function (for example, Images > Downl. graphics). The browser opens.
Choose a bookmark for the site to download from.

47

9. Media

■ Camera

Your device has a camera on the back cover.

To use the camera, open the camera slide cover. To activate
the camera, press the camera key.

To zoom in or out, use the volume keys
or scroll up or down. To capture an
image, press the camera key. The image
is saved to Images in Gallery, and the
image is displayed. To return to the
viewfinder, select Back. To delete the
photo, press the clear key.

To capture images sequentially, select Options > Sequence mode > On. In the
sequence mode, the camera captures six images in short intervals and displays the
images in a grid.

To use the panorama mode, select Options > Panorama mode. Press the
capture key to capture a panorama image. The panorama preview is displayed.
Turn slowly to right or left. You cannot change the direction. If the arrow on the
display is red, you are turning too fast. To stop the panorama, press the
capture key again.

To turn the flash on or off, select Options > Flash > On or Off. If you select

Automatic, the flash is used automatically when necessary.

Keep a safe distance when using the flash. Do not use the flash on people or animals at close
range. Do not cover the flash while taking a picture.

In dim lighting, to use night mode, select Options > Night mode > On.

To use the self-timer, select Options > Self-timer and the time you want the
camera to wait before capturing the image. Press the scroll key, and the timer
starts.

FCC DRAFT

48

To adjust the white balance or color tone, select Options > Adjust > White

balance or Colour tone.

To record a video, select Options > Video mode, and press the scroll key to start
recording.

Camera settings

Your device supports an image capture resolution of 1600 x 1200 pixels.

To change camera settings, select Menu > Media > Camera > Options > Settings.

Select Image and from the following settings:

Image quality — The better the image quality and the higher the resolution, the

more memory the image consumes.

Show captured image — To not display the image after capturing, select No.

Default image name — Change how the captured images are named.

Memory in use — Select whether you want to save your images in the device

memory or on the memory card.

Select Video and from the following settings:

Length — If set to Maximum, the length of the recorded video is only restricted by

the available memory. If set to Short, the recording time is optimized for MMS
sending.

DR

C

AF

T

C

Default video name — Select how the video clips are named.

Memory in use — Select whether you want to save your video clips in the device

memory or on the memory card.

F

■ Music player

To open the music player, select Menu > Media > Music player.

Music library

Music library is a database of the available music tracks. To open the music library,

in the music player main view, select Options > Music library.

To update the music library and search for music tracks in the device memory and
on the memory card, select Options > Update Music library.

49

To play a specific album, select Albums, scroll to the album, and select Options >

Play. To listen to specific tracks on the album, select Albums and an album, mark

the tracks, and select Options > Play.

Track lists

To compile and save your own track list, select Track lists > Options > New track

list. Select the memory in which to save the track list, and enter a name for the

track list. Mark the desired tracks, and press the scroll key.

To listen to a track list, select Track lists, scroll to the track list, and select

Options > Play.

You can add tracks to a saved track list from other views. For example, to add an
album, select Albums, locate the album, scroll to it, and select Options > Add to

track list > Saved track list. Select the track list to which to add the album.

Listen to music

Warning: Listen to music at a moderate level. Continuous exposure to high

volume may damage your hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely loud.

To start playing or pause playback, press the scroll key. To skip to the next or
previous track, scroll down or up. To fast forward or rewind, press and hold the
scroll key down or up.

To see the currently playing track list, select Options > Open 'Now playing'.

To return to the standby mode and leave the music player in the background, press
the end key.

To play the music tracks repeatedly, select Options > Loop. Select All to repeat all
the currently playing tracks, One to repeat the currently playing track, or Off to
not repeat tracks.

To play music in random order, select Options > Random play > On.

FCC DRAFT

Audio settings

To adjust the tone of the sound and apply effects to the sound, select Options >

Audio settings.

Equaliser

To enhance or diminish frequencies during music playback and modify how your
music sounds, select Options > Audio settings > Equaliser.

To use a preset, scroll to it, and select Options > Activate.

50

Create a new preset

1. To create a new preset, select Options > New preset, and enter the preset

name.

2. To move between frequency bands, scroll left or right. To enhance or diminish

sound in the frequency band, scroll up or down.

3. Select Back.

■ RealPlayer

With RealPlayer, you can play media files such as video clips saved in the device
memory or memory card, or stream media files over the air by opening a streaming
link. To open RealPlayer, select Menu > Media > RealPlayer.

RealPlayer does not support all file formats or all the variations of file formats.

T

Play media files

To play a media file in RealPlayer, select Options > Open and from the following:

Most recent clips — to play media files that you have recently played

Saved clip — to play media files saved in the device or memory card

To stream content over the air, do the following:

• Select a streaming link saved in the gallery. A connection to the streaming

server is established.

• Open a streaming link while browsing the web.

To stream live content, you must first configure your default access point. See
"Access points," p. 76.

Many service providers require you to use an internet access point (IAP) for your
default access point. Other service providers allow you to use a WAP access point.
Contact your service provider for more information.

In RealPlayer, you can only open an rtsp:// URL address. You cannot open an http:/
/ URL address; however, RealPlayer recognizes an http link to a .ram file since a
.ram file is a text file containing an rtsp link.

Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.

Shortcuts during play

Scroll up to seek forward or down to seek back in the media file.

C

F

DR

C

AF

51

Press the volume keys to increase or decrease the sound volume.

■ Visual Radio

You can use the Visual Radio application as a FM radio with automatic tuning and
preset stations or with parallel visual information related to the radio program if
you tune in to stations that offer Visual Radio service and your network operator
supports the service. The Visual Radio service uses packet data (network service).

Visual Radio cannot be started when the device is in offline mode.

The FM radio depends on an antenna other than the wireless device antenna. A compatible
headset or enhancement needs to be attached to the device for the FM radio to function
properly.

Warning: Listen to music at a moderate level. Continuous exposure to high
volume may damage your hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely loud.

You can make a call or answer an incoming call while listening to the radio. The
radio is muted when there is an active call.

To open Visual Radio, select Menu > Media > Radio.

To turn the radio off, select Exit.

Tune and save a radio station

To start the station search when the radio is on, select or . Searching stops
when a station is found. To save the station, select Options > Save station. Select
a location for the station. Enter the name of the station, and select OK.

Radio functions

To adjust the volume, press the volume keys.

Select or to scroll to the next or previous saved station. The buttons are
inactive if there are no saved stations.

When using a compatible headset, press the headset key to scroll to the next
saved radio station.

To save the current station, select Options > Save station, a preset position, and
enter the station name.

To set the station frequency manually, select Options > Manual tuning.

FCC DRAFT

52

To listen to the radio in the background and go to the standby mode, select

Options > Play in background.

Station list

When the radio is on, select Options > Stations.

The station list is used for managing the saved radio stations.

Station setup

Scroll to a station in the station list, select it and Edit to change the station
parameters.

View visual content

To check availability and costs, and to subscribe to the service, contact your
service provider.

To view visual content of the current station, select .

If the visual service ID was not saved in the station list, you are asked for the visual
service ID. Enter the visual service ID, and select OK. If you do not have the visual
service ID, select Retrieve to access the station directory (network service).

To end the visual content feed but not the FM radio, select Close.

To set light settings and the power saver time-out, select Options > Display

settings.

Visual Radio settings

When the radio is on, select Options > Settings and the following:

Start-up tone — to enable or disable the start-up tone

Auto-start service — to enable or disable the automatic display of visual content

Access point — to select the access point

Station directory

With the station directory (network service) you can select Visual Radio enabled
or traditional radio stations from a list, grouped in folders.

To check availability and costs, and to subscribe to the service, contact your
service provider.

C

F

DR

C

AF

T

53

Access the station directory from the visual content view

To retrieve the visual service ID and to start visual content for the currently tuned
radio station, select and Retrieve. After the connection to the station
directory is established, select the nearest location to your current position from a
list of folders.

The device compares the frequencies of the listed radio stations with the currently
tuned in frequency. If a matching frequency is found, the visual service ID of the
tuned radio station is displayed. Select OK to start viewing the visual content.

If there is more than one radio station with matching frequencies, the radio
stations and their visual service ID are displayed in a list.

Select the desired radio station. The tuned radio station and the visual service ID
are displayed. Select OK to start viewing the visual content.

Access the station directory from options

To access the station directory (network service) from the station list, select

Options > Station directory.

After the connection to the station directory, you are requested to select the
nearest location to your current position from a list of locations.

Radio stations that provide visual content are indicated with .

Select the desired radio station and from the following options:

Listen — to tune to the highlighted radio station. To confirm the frequency setting,

select Yes.

Start visual service — to open the visual content of the selected radio station (if

available)

Save — to save the details of the selected radio station to the station list

Details — to view channel information

FCC DRAFT

10. Web

To browse web pages written in XHTML, WML, or HTML, select Menu > Web, or
press and hold 0 in the standby mode.

Check the availability of services, pricing, and tariffs with your service provider.
Service providers also give you instructions on how to use their services.

54

Important: Use only services that you trust and that offer adequate security and

protection against harmful software.

■ Set up the phone for the browser service

Your device may configure the WAP or internet access point automatically based
on your SIM card.

You can use Settings wizard to configure WAP or internet access point settings.
See "Settings wizard," p. 79.

You may receive service settings in a configuration message from the service
provider.

To define an access point manually, see "Access points," p. 76.

T

■ Make a connection

To access web pages, do the following:

• Select the home page ( ) of your service provider.

• Select a bookmark from the bookmarks view.

• In the bookmarks view, enter the address of the web page, and select Go to.

■ View bookmarks

Your device may have preinstalled bookmarks and links for third-party internet sites. You
may also access other third-party sites through your device. Third-party sites are not
affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose
to access such sites, you should take precautions for security or content.

Bookmarks are indicated by the following icons:

The starting page defined for the default access point.

The automatic bookmarks folder contains bookmarks ( ) that are collected

automatically when you browse pages.

Any bookmark showing the title or internet address of the bookmark.

and may be replaced with the icons of the website.

Add bookmarks manually

1. In the bookmarks view, select Options > Bookmark manager > Add bookmark.

2. Fill in the fields.

C

F

DR

C

AF

55

3. Select Options > Save.

Send bookmarks

Scroll to a bookmark or mark several bookmarks, select Options > Tools > Send
and an option.

■ Connection security

If the security indicator is displayed during a connection, the data transmission
between the device and the internet gateway or server is encrypted.

The security icon does not indicate that the data transmission between the gateway and the
content server (or place where the requested resource is stored) is secure. The service
provider secures the data transmission between the gateway and the content server.

To view details about the connection, encryption status, and information about
server authentication, select Options > Tools > Page info.

Security features may be required for some services, such as banking services. For
such connections you need security certificates. For more information, contact
your service provider. See also "Certificate management," p. 73.

■ Browse web pages

Copyright protections may prevent some images, music (including ringing tones),
and other content from being copied, modified, transferred, or forwarded.

Important: Only install and use applications and other software from trusted
sources, such as applications that are Symbian Signed or have passed the Java
Verified

FCC DRAFT

TM

testing.

Keys and commands for browsing

To open a link, make selections or check boxes, and press the scroll key.

To go to the previous page while browsing, select Back. If Back is not available,
select Options > Navigation options > History to view a chronological list of the
pages visited during a browsing session. To choose the desired page, scroll left or
right, and select it. The history list is cleared each time a session is closed.

To save a bookmark while browsing, select Options > Save as bookmark.

To retrieve the latest content from the server, select Options > Navigation

options > Reload.

56

To open the browser toolbar, scroll to an empty part of the page, and press the
scroll key.

Keypad shortcuts while browsing
1 — Open your bookmarks.

2 — Search for keywords in the current page.

3 — Return to the previous page.

5 — List all open windows.

8 — Show the page overview of the current page. Press 8 again to zoom in and

view the desired section of the page.

9 — Enter a new web address.

0 — Go to the start page.

* or # — Zoom the page in or out.

T

AF

Mini map

Mini map helps you navigate web pages that contain large amount of

information. When Mini map is on in browser settings and you scroll through a
large web page, Mini map opens and displays an overview of the web page you are
browsing. To move in Mini map, scroll. When you stop scrolling, Mini map
disappears and the area outlined in Mini map is displayed.

DR

C

C

Page overview

With Page overview, you can move more quickly to the desired part of a web page.
Page overview may not be available on all pages.

To show the page overview of the current page, press 8. To find the desired spot on
the page, scroll up or down. Press 8 again to zoom in and view the desired section
of the page.

F

Web feeds and blogs

Web feeds are .xml files on web pages that are widely used to share the latest
entry headlines or full text, for example, recent news in the form of news feeds.
Blogs or weblogs are web diaries. Most of the web feeds use RSS and ATOM
technologies.

57

The browser automatically detects if a web page contains web feeds. To subscribe
to a web feed, select Options > Subscribe and a feed, or click on the link. To view
the web feeds you have subscribed to, in the bookmarks view, select Web feeds.

To update a web feed, select it, and Options > Refresh.

To define how the web feeds are updated, select Options > Settings > Web feeds.

Saved pages

You can save pages and view them later offline.

To save a page while browsing, select Options > Tools > Save page.

To open the Saved pages view, in the bookmarks view, select Saved pages. To open
a page, select it.

To start a connection to the browser service and retrieve the page again, select

Options > Navigation options > Reload. The device stays online after you reload

the page.

■ End a connection

To end the connection and view the browser page offline, select Options > Tools >

Disconnect. To quit browsing, select Options > Exit.

■ Empty the cache

A cache is a memory location that is used to store data temporarily. If you have tried to
access or have accessed confidential information requiring passwords, empty the cache
after each use. The information or services you have accessed are stored in the cache. To
empty the cache, select Menu > Web > Options > Clear privacy data > Clear cache.

To clear all privacy data, including the cache, cookies, form data, passwords, and
browsing history, select Menu > Web > Options > Clear privacy data > All.

FCC DRAFT

■ Browser settings

Select Options > Settings and from the following:

General

Access point — Select the default access point.

Homepage — Define the address of the desired homepage.

Mini map — Set on or off.

58

History list — Select whether a list of the pages you have visited during the current

browsing session are displayed when you select Back.

Security warnings — Hide or show security notifications.

Java/Ecma Script — Enable or disable the use of scripts.

Page

Load content — Select what type of content is loaded automatically while

browsing. If you select Text only, to load images during browsing, select Options >

Tools > Load images.

Screen size — Choose how to use the display area for viewing pages.

Default encoding — When you select Automatic, the browser automatically tries

to choose the correct character encoding.

Block pop-ups — Allow or block automatic opening of different pop-ups while

browsing.

Automatic reload — Enable or disable automatic refresh of browser pages.

Font size — Select the font size.

AF

T

Privacy

Auto. bookmarks — Select On if you want the bookmarks to be automatically

saved in the Auto. bookmarks folder when you visit a page. When you select Hide

folder, the bookmarks are still automatically added to the folder.

Form data saving — If you do not want the data you enter to different forms on a

web page to be saved and used next time the page is entered, select Off.

Cookies — Enable or disable the receiving and sending of cookies (a means for

content providers to identify users and their preferences for frequently used
content).

Web feeds

Automatic updates — Define whether you want the web feeds to be updated

automatically or not, and how often you want to update them. Setting the
application to retrieve web feeds automatically may involve the transmission of
large amounts of data through your service provider's network. Contact your
service provider for information about data transmission charges.

Acc. point for auto-update — Select the desired access point for updating (only

available when Automatic updates is on).

C

F

DR

C

59

11. Download!

Download! (network service) is a mobile content shop available on your device.

You may be able to download some content free of charge.

With Download! you can discover, preview, buy, download, and upgrade content,
services, and applications. The items are categorized under catalogs and folders
provided by different service providers. The available content depends on your
service provider.

Select Menu > Download!.

Download! uses your network services to access the most up-to-date content. For

information on additional items available through Download!, contact your
service provider or the supplier or manufacturer of the item.

12. Organizer

■ Clock

Select Menu > Organiser > Clock.

Clock settings

To change the time or date, select Options > Settings. For more information about
the settings, see "Date and time," p. 71.

Set an alarm

1. To set a new alarm, scroll right to Alarm, and select Options > New alarm.

2. Enter the alarm time, select whether and when the alarm is repeated, and

select Done. When an alarm is active, is shown.

To cancel an alarm, scroll to the alarm, and select Options > Remove alarm. To
deactivate a repeated alarm, select Options > Deactivate alarm.

FCC DRAFT

Turn off the alarm

Select Stop to turn off the alarm.

Select Snooze to stop the alarm for 5 minutes, after which it resumes.

60

If the alarm time is reached while the device is switched off, the device switches itself on
and starts sounding the alarm tone. If you select Stop, the device asks whether you want to
activate the device for calls. Select No to switch off the device or Yes to make and receive
calls. Do not select Yes when wireless phone use may cause interference or danger.

World clock

To open the world clock view, scroll right to World. To add cities to the list, select

Options > Add city.

To set your current city, scroll to a city, and select Options > Set as current city.
The city is displayed in the clock main view, and the time in your device is changed
according to the city selected. Check that the time is correct and matches your
time zone.

T

■ Calendar

Select Menu > Organiser > Calendar.

In the calendar, you can keep track of your appointments, meetings, birthdays,
anniversaries, and other events. You can also set a calendar alarm to remind you
of upcoming events.

Create calendar entries

1. Select Options > New entry and an entry type.

Anniversary entries are repeated every year.

2. Fill in the fields.

Repeat — Press the scroll key to change the entry to be repeated. A repeating

entry is indicated by in the day view.

Repeat until — Set an ending date for the repeated entry, for example, the last

date of a weekly course you are taking. This option is shown only if you have
selected to repeat the event.

Synchronisation > Private — After synchronization the calendar entry can be

seen only by you, and it is not shown to others even if they have online access
to view the calendar. Public — The calendar entry is shown to others who have
access to view your calendar online. None — The calendar entry is not copied
when you synchronize your calendar.

3. To save the entry, select Done.

C

F

DR

C

AF

61

Calendar views

Press # in the month, week, or day views to automatically highlight today’s date.

To create a meeting entry, press any number key (0–9) in any calendar view.

To go to a certain date, select Options > Go to date. Write the date, and select OK.

To-do

Select Options > To-do view.

In the To-do view, you can keep a list of tasks that you need to do.

Create a to-do note

1. To start to write a to-do note, press any number key (0–9).

2. Write the task in the Subject field. Set a due date and a priority for the task.

3. To save the to-do note, select Done.

■ Notes

Select Menu > Organiser > Notes.

To write a new note, start writing. To save the note, select Done.

You can save plain text files (.txt format) you receive to Notes.

■ Converter

Select Menu > Organiser > Converter.

In the converter, you can convert measurement parameters from one unit to
another, for example, length (yards to metres).

The converter has limited accuracy and rounding errors may occur.

FCC DRAFT

Convert units

To convert currency, you must first set the exchange rate. See "Set a base currency
and exchange rates," p. 63.

1. Select Type, the type of measurement to convert, and OK.

2. Select the first unit field, the unit from which you want to convert, and OK.

3. Select the next unit field and the unit to which you want to convert.

4. In the first amount field, enter the value to be converted. The other amount

field changes automatically to show the converted value.

62

Press # to add a decimal and press * for the +, - (for temperature), and E
(exponent) symbols.

The conversion order changes if you write a value in the second amount field. The
result is shown in the first amount field.

Set a base currency and exchange rates

Before you can convert currency, you need to choose a base currency (usually your
domestic currency) and add exchange rates.

The rate of the base currency is always 1. The base currency determines the
conversion rates of the other currencies.

1. Select Currency as the measurement type, then Options > Currency rates.

2. To change the base currency, scroll to the currency (usually your domestic

currency), and select Options > Set as base currency.

3. Add exchange rates, scroll to the currency, and enter a new rate, that is, how

many units of the currency equal one unit of the base currency you selected.

4. After you insert all the required exchange rates, you can convert currency.

Note: When you change base currency, you must enter new exchange rates
because all previously set exchange rates are cleared.

DR

AF

T

C

13. Applications

C

F

■ GPS data

To start the GPS data application, select Menu > Applications > GPS data.

Navigation

To use route guidance, select Navigation.

Route guidance shows the straightest route and the shortest distance to the
destination. Any obstacles, such as buildings and natural obstacles, are ignored.
Differences in altitude are not taken into account when calculating the distance.
Route guidance is active only when you move.

To set your trip destination, select Options > Set destination and a landmark as
the destination, or enter the latitude and longitude coordinates. Select Stop

navigation to clear the set destination.

To view the position information of your current location, select Position.

63

Position

To save your current location as a landmark, select Options > Save position.

Trip distance

Select Trip distance > Options > Start to activate trip distance calculation and

Stop to deactivate it. The calculated values remain on the display.

Select Reset to set the trip distance, time, average and maximum speeds to zero
and to start a new calculation. Select Restart to set also the odometer and total
time to zero.

The trip meter has limited accuracy, and rounding errors may occur. Accuracy can also be
affected by availability and quality of GPS signals.

Position requests

You may receive a request from a network service to receive your position
information. Service providers may offer information about local topics, such as
weather or traffic conditions, based upon the location of your device.

When you receive a position request, a message is displayed showing the service
that is making the request. To allow your position information to be sent, select

Accept; to deny the request, select Reject.

■ Landmarks

With landmarks you can save the position information of specific locations to
your device. You can use your saved landmarks in compatible applications, such as
the Navigator application.

To create a new landmark, select Menu > Applications > Landmarks > Options >

New landmark. To make a positioning request for the coordinates of your current

location, select Current position. To enter the position information manually,
select Enter manually.

To add a landmark to preset categories, select the landmark, and Options > Add to

category. Select the categories to which you want to add the landmark.

To send one or several landmarks to a compatible device, select Options > Send.
Your received landmarks are placed in Inbox in Messaging.

FCC DRAFT

■ Adobe Reader

Use Adobe Reader to view portable document format (.pdf) documents. To open
the application, select Menu > Applications > Adobe PDF.

64

Open a .pdf file

To open a recently viewed document, select it. To open a document that is not
listed in the main view, select Options > Browse for file the memory and folder
wherein the file resides and the file.

View a document

To move around within a page, scroll. To move to the next page, scroll down at the
bottom of the page.

To zoom in or out, select Options > Zoom > In or Out.

To find text, select Options > Find > Text, and enter the text you want to find. To
find the next occurrence, select Options > Find > Next.

To rotate the document, select Options > View > Rotate left or Rotate right.

To save a copy of the document, select Options > Save, and specify where to save
it.

Settings

Select Options > Settings and from the following settings:

Default zoom % — to set the default zoom when opening a .pdf file for viewing

View mode > Full screen — to open documents in full screen mode

Save settings on exit > Yes — to save the settings as default when you exit Adobe
Reader

■ Quickoffice

To use the Quickoffice applications, select Menu > Applications > Quickoffice.

To view a list of Word, Excel, and PowerPoint documents, scroll right or left to the
Quickword, Quicksheet, or Quickpoint view. For example, available Microsoft
Word documents are listed in the Quickword view.

To open a file in its respective application, select it. To sort files, select Options >

Sort by and an option.

C

F

DR

C

AF

T

Quickword

With Quickword, you can view native Microsoft Word documents on the display of
your device. Quickword supports colors, bold, italics, and underline.

65

Quickword supports the viewing of documents saved in .doc format in Microsoft
Word 97, 2000, XP, and 2003. Not all variations or features of the mentioned file
formats are supported.

View Word documents

To move in the document, scroll.

To search the document for text, select Options > Search options > Find.

Quicksheet

With Quicksheet, you can read Microsoft Excel files on the display of your device.

Quicksheet supports the viewing of spreadsheet files saved in .xls format in
Microsoft Excel 97, 2000, XP, and 2003. Not all variations or features of the
mentioned file formats are supported.

View spreadsheets

To move around in the spreadsheet, scroll.

To switch between worksheets, select Options > Worksheet.

To search the speadsheet for a text within a value or formula, select Options >

Search options > Find.

To change how the spreadsheet is displayed, select Options and from the
following:

Pan — to navigate within the current worksheet by blocks. Scroll to the desired

block, and select it.

Zoom — to zoom in or out

Freeze panes — to keep the rows and columns above and to the left of the selected

cell visible

Resize — to adjust the size of columns or rows

FCC DRAFT

Quickpoint

With Quickpoint, you can view Microsoft PowerPoint presentations on the display
of your device.

Quickpoint supports the viewing of presentations created in .ppt format in
Microsoft PowerPoint 2000, XP, and 2003. Not all variations or features of the
mentioned file formats are supported.

66

View presentations

To move between the slide, outline, and the notes view, scroll left or right.

To move to the next or previous slide in the presentation, scroll down or up.

To view the presentation in full screen, select Options > Full screen.

To expand items in the presentation outline in the outline view, select Options >

Outline > Expand.

Quickmanager

With Quickmanager, you can download software, including updates, upgrades,
and other useful applications. You can pay for the downloads by phone bill or
credit card.

To open Quickmanager, select Menu > Applications > Quickoffice, and scroll right
to the Quickmanager view.

More information

If you experience problems with Quickword, Quicksheet, or Quickpoint, visit
www.quickoffice.com for more information. Support is also available by sending
an e-mail to [e-mail].

DR

AF

T

C

14. Settings

C

F

■ Profiles

Select Menu > Settings > Profiles.

In Profiles, you can adjust and personalize the device tones for different events,
environments, or caller groups. You can see the currently selected profile at the
top of the display in the standby mode.

If the General profile is in use, only the current date is shown.

To activate the profile, select the profile and Activate.

Tip: To quickly change to Silent from any other profile, in the standby
mode, press and hold #.

To personalize a profile, select the profile, Personalise, and from the following
options:

67

Ringing tone — To set the ringing tone (also a video ringing tone) for voice calls,

choose a ringing tone from the list. Press any key to stop the sound. You can also
change ringing tones in contacts. See "Add a ringing tone," p. 44.

Say caller's name — Select On to have the device say the caller’s name when the

phone is ringing.

Ringing type — When Ascending is selected, the ringing volume starts from level

one and increases level by level to the set volume level.

Ringing volume — Set the volume level for the ringing and message alert tones.

Message alert tone — Set the alert tone for text and multimedia messages.

E-mail alert tone — Set the alert tone for e-mail messages.

Vibrating alert — Set the device to vibrate to alert for incoming calls and

messages.

Keypad tones — Set the volume level for keypad tones.

Warning tones — Activate or deactivate warning tones.

Alert for — Set the device to ring only upon calls from phone numbers that belong

to a selected contact group. Phone calls coming from people outside the selected
group have a silent alert.

Profile name — Name the profile. This setting is not shown for the General and
Offline profiles.

When using Offline, the device is not connected to the cellular network. If no SIM
card is installed, to use some functions of the device, start the device in Offline.

Important: In the offline profile you cannot make or receive any calls, or use
other features that require cellular network coverage. Calls may still be possible
to the official emergency number programmed into your device. To make calls,
you must first activate the phone function by changing profiles. If the device has
been locked, enter the lock code.

FCC DRAFT

■ Themes

To change the look of your device’s display, activate a theme. A theme can include
the standby mode wallpaper and power saver. You can edit a theme to personalize
your device further.

Select Menu > Settings > Themes. To see a list of the available themes, select

General. The active theme is indicated by a check mark.

68

To preview a theme, scroll to the theme, and select Options > Preview. To activate
the previewed theme, select Set.

In Themes, you can also set the menu view type, set a custom wallpaper, and
personalize the power saver and the cover display.

■ 3-D tones

With 3-D tones you can apply three-dimensional sound effects to ringing tones.
Not all ringing tones support 3-D effects. To edit 3-D tone settings, select Menu >

Settings > 3-D tones.

To enable the 3-D effects, select 3-D tones > On. To change the ringing tone,
select Ringing tone and the desired ringing tone.

To change the 3-D effect that is applied to the ringing tone, select Sound

trajectory and the desired effect. To modify the effect, select Trajectory speed,
Doppler effect, or Reverberation. Doppler effect is not be available for all sound

trajectories.

To listen to the ringing tone with the 3-D effect, select Options > Play tone

If you enable the 3-D tones but do not select any 3-D effect, stereo widening is
applied to the ringing tone.

DR

AF

T

C

■ Voice commands

To select the device functions to activate with a voice command, select Menu >

Settings > Voice comm.. The voice commands for changing profiles are in the
Profiles folder.

To activate a new voice command for an application, select Options > New

application and the application. To play the activated voice command, select

Options > Playback.

To use voice commands, see "Voice dialing," p. 22.

C

F

■ Phone settings

General

Select Menu > Settings > Phone sett. > General > Personalisation, Date and time,

Slide handling, Enhancement, Security, Factory settings, Positioning, or My own
key.

69

Personalisation

Select Display, Standby mode, Tones, Language, Themes, or Voice comms..

Display

Light sensor — to adjust the light sensor that observes the lighting conditions and

adjusts the brightness of the display

Font size — to select the font size used in lists and editors

Power saver time-out — to set the time-out period after which the power saver is

activated

Welcome note / logo — to set the welcome note or logo which is displayed briefly

each time you switch on the device.

Light time-out — to set the time-out for the display light

Standby mode

Active standby — to enable or disable active standby. See "Active standby," p. 16.

Active standby apps. — to select the application shortcuts to appear in the active

standby. This setting is available only if Active standby is set to On.

Shortcuts — to assign shortcuts for the right and left selection keys, scrolling in

different directions or pressing the scroll key in the standby mode. The scroll key
shortcuts are not available if Active standby is On.

Operator logo — this setting is visible only if you have received and saved an

operator logo. You can select whether the operator logo is shown.

Tones

Change the tones of the clock, calendar and currently active profile. See "Profiles,"
p. 67.

Language

Phone language — to change the language for the display texts in your device. This

change may also affect the format used for date and time and the separators used,
for example, in calculations. If you select Automatic, the device selects the
language according to the information on your SIM card. After you have changed
the display text language, the device restarts.

Writing language — to change the writing language of your device. Changing the

language affects the characters and special characters available when writing
text and the predictive text dictionary used.

Predictive text — to set predictive text input On or Off for all editors in the device.

Select a language for entering predictive text from the list.

FCC DRAFT

70

Themes

Apply themes. See "Themes," p. 68.

Voice commands

Edit voice command and voice dialing settings. See "Voice commands," p. 69.

Date and time

Time and Date — to set the time and date

Time zone — to set the time zone of your location. If you set Network operator
time > Auto-update, the local time is shown.

Date format — to select the format to display dates

Date separator — to select the date separator

Time format — to select between 24-hour and 12-hour time format

Time separator — to select the time separator

Clock type — to select whether the analog or digital clock is shown in the standby

mode. See "Clock," p. 60.

Clock alarm tone — to select the alarm clock tone

Workdays — to specify days for alarms repeated only on workdays

Network operator time (network service) — to allow the network to update time,

date, and time zone information to your device. If you select Auto-update, all
active connections are disconnected. Check any alarms as these may be affected.

Slide handling

Opening the slide — to select whether incoming calls are answered when opening

the slide, select Answer incoming call or Call not answered

Closing the slide — to select whether active calls are ended when closing the slide,

select End active call or Continue active call

Keyguard activation — to select whether the keypad is locked when closing the

slide, select On when closing slide or Off when closing slide. To receive a query
every time when closing the slide, select Always ask.

C

F

DR

C

AF

T

Enhancement

To change settings of an enhancement, in the Enhancement sett. view, scroll to an
enhancement, such as Headset, select Options > Open and from the following
options:

71

Default profile — to select the profile you want to activate each time you connect

the enhancement to your device

Automatic answer — to set the device to answer an incoming call automatically

after 5 seconds when this enhancement is connected to your device. If the Ringing

type is set to Beep once or Silent, automatic answer cannot be used, and you must

answer the call manually.

Lights — to set the device lights continuously on while using the enhancement,

select On. This option is not available to all enhancements.

Security

Select Phone and SIM card, Certificate management, or Security module.

Phone and SIM card

You can change the following codes: lock code, PIN code, and PIN2 code. These
codes can only include the numbers from 0 to 9.

Avoid using access codes similar to emergency numbers to prevent accidental
dialing of the emergency number.

PIN code request — to set the device to request the code each time the device is

switched on. Some SIM cards may not allow the PIN code request to be turned Off.

PIN code, PIN2 code, and Lock code — to change the codes

Keypad autolock period > User defined — to automatically lock the keypad after a

defined period of inactivity

Phone autolock period — to set a time-out after which the device is automatically

locked. To use the device again, you need to enter the correct lock code. To turn off
the autolock period, select None.

Lock if SIM card changed — to set the device to prompt for the lock code when an

unknown, new SIM card is inserted into your device. The device keeps a list of SIM
cards that are recognized as the owner cards.

Closed user group (network service) — to specify a group of people whom you can

call and who can call you. For more information, contact your service provider. To
activate the default group agreed on with the service provider, select Default. If
you want to use another group (you need to know the group index number), select

On.

When calls are limited to closed user groups, calls may be possible to the official emergency
number programmed into your device.

FCC DRAFT

72

Confirm SIM services (network service) — to set the device to display confirmation

messages when you use a SIM card service

Certificate management

A list of authority certificates that have been stored in your device is displayed in

Certificate management. To see a list of personal certificates if available,

scroll right.

Digital certificates should be used if you want to connect to an online bank or
another site or remote server for actions that involve transferring confidential
information. They should also be used if you want to reduce the risk of viruses or
other malicious software and be sure of the authenticity of software when
downloading and installing software.

Important: Even if the use of certificates makes the risks involved in remote
connections and software installation considerably smaller, they must be used
correctly in order to benefit from increased security. The existence of a certificate
does not offer any protection by itself; the certificate manager must contain
correct, authentic, or trusted certificates for increased security to be available.
Certificates have a restricted lifetime. If "Expired certificate" or "Certificate not
valid yet" is shown even if the certificate should be valid, check that the current
date and time in your device are correct.

Before changing any certificate settings, you m ust ma ke sur e that you re ally t rust
the owner of the certificate and that the certificate really belongs to the listed
owner.

View certificate details and check authenticity

You can only be sure of the correct identity of a server when the signature and the
period of validity of a server certificate have been checked.

The device notifies you if the identity of the server is not authentic or if you do not
have the correct security certificate in your device.

To check certificate details, scroll to a certificate, and select Options > Certificate

details. While opening the certificate details, the device checks the validity of the

certificate and one of the following notes may appear:

Expired certificate — The validity period has ended for the selected certificate.

Certificate not valid yet — The validity period has not yet begun for the selected

certificate.

Certificate corrupted — The certificate cannot be used. Contact the certificate

issuer.

Certificate not trusted — You have not set any application to use the certificate.

C

F

DR

C

AF

T

73

Change the trust settings

Before changing any certificate settings, you must make sure that you really trust
the owner of the certificate and that the certificate really belongs to the listed
owner.

Scroll to an authority certificate, and select Options > Trust settings. Depending
on the certificate, a list of the applications that can use the selected certificate is
shown.

Security module

View or edit security modules.

Factory settings

Reset some of the settings to their original values. You need the lock code. See
"Lock code," in "Access codes," p. 19.

My own key

My own key — to configure pressing the my own key to open a specific application.

See "My own key," p. 20.

Positioning

With the positioning service you can receive information from service providers
about local issues such as weather and traffic conditions, based on the location of
your device (network service).

To enable a positioning method, select Positioning methods, scroll to the
positioning method, and select Options > Enable. To stop using it, select

Options > Disable.

To define the positioning server access point, select Positioning server > Access

point and the desired access point. Then select Server address, and enter the

domain name or URL address of the server.

FCC DRAFT

Phone

Select Menu > Settings > Phone sett. > Phone and Call, Call divert, Call barring, or

Network.

Call

Send my caller ID (network service) — to set your phone number to be displayed

(Yes) or hidden (No) from the person whom you are calling. The value may be set
by your service provider when you subscribe to the service (Set by network).

74

Call waiting (network service) — to set the network to notify you of a new

incoming call while you have a call in progress. To request the network to activate
call waiting, select Activate. To request the network to deactivate call waiting,
select Cancel. To check whether the function is active, select Check status.

Reject call with SMS — to enable rejecting phone calls with a text message. See

"Answer or reject a call," p. 23.

Message text — to enter a text to be sent when you reject a call with a text

message

Automatic redial — to set the device to make a maximum of 10 attempts to

connect the call after an unsuccessful call attempt. Press the end key to stop
automatic redialing.

Summary after call — to set the device to briefly display the approximate duration

of the last call

Show call duration — to set the device to display the call duration during a call

Speed dialling > On — to set the device to dial the numbers assigned to the speed

dialing keys, 2 to 9, by pressing and holding the corresponding number key

Anykey answer > On — to answer an incoming call by briefly pressing any key,

except the left and right selection keys, volume keys, my own key, Navigator key
and the end key

Line in use (network service) — shown only if the SIM card supports two subscriber

numbers, that is, two phone lines. Select which phone line (Line 1 or Line 2) you
want to use for making calls and sending short messages.

Calls on both lines can be answered irrespective of the selected line. You cannot
make calls if you select Line 2 and have not subscribed to this network service. To
prevent line selection, select Line change > Disable if supported by your SIM card.
To change this setting, you need the PIN2 code.

C

F

DR

C

AF

T

Call divert

Call divert is a network service.

1. Select which calls you want to divert: Voice calls, Data calls, or Fax calls.

2. Select the desired option. For example, to divert voice calls when your number

is busy or when you reject an incoming call, select If busy.

3. To set the divert option on or off, select Activate or Cancel. To check whether

the option is activated, select Check status. Several divert options can be
active at the same time.

75

Call barring and call diverting cannot be active at the same time.

Call barring

Call barring (network service) allows you to restrict the calls that you make and
receive with your device. To change the settings, you need the barring password
from your service provider.

Scroll to the desired barring option, and to request the network to set call
restriction on, select Options > Activate. To set the selected call restriction off,
select Cancel. To check whether the calls are barred, select Check status. To
change the barring password, select Edit barring password. To cancel all active call
barrings, select Cancel all barrings.

Call barring and call diverting cannot be active at the same time.

When calls are barred, calls may be possible to certain official emergency numbers.

Network

Operator selection — To set the device to search for and select automatically one

of the available networks, select Automatic. To select the desired network
manually from a list of networks, select Manual. If the connection to the manually
selected network is lost, the device sounds an error tone and asks you to select a
network again. The selected network must have a roaming agreement with your
home network, that is, the operator whose SIM card is in your device.

Cell info display (network service) — To set the device to indicate when it is used in

a cellular network based on microcellular network (MCN) technology and to
activate cell info reception, select On.

Connection

Select Menu > Settings > Phone sett. > Connection > Bluetooth, USB, Access

points, Packet data, Data call, SIP settings, Configurations, or APN control .

Bluetooth

Switch Bluetooth on or off, and edit Bluetooth settings. See "Bluetooth
connection," p. 82.

USB

Edit USB settings. See "USB data cable," p. 84.

Access points

To establish a data connection, an access point is required. You can define
different kinds of access points:

76

FCC DRAFT

• MMS access point to send and receive multimedia messages

• WAP access point to view web pages

• Internet access point (IAP) (for example, to send and receive e-mail)

Check which kind of access point you need with your service provider for the
service you wish to access. For availability and subscription to data connection
services, contact your service provider.

You may receive access point settings in a message from your service provider, or
you may have preset access point settings in your device.

To create a new access point or edit an existing access point, select Options >

New access point or Edit. To create a new access point using the settings of an

existing access point, scroll to an access point, and select Options > Duplicate

access point.

Depending on the connection type selected in Data bearer, only certain settings
are available. Fill in all fields marked with Must be defined or with an ast erisk.

Contact your service provider for the following settings: Data bearer, Access point

name (for packet data only), Dial-up number (for data call only), User name,
Pass word, Authentication, Homepage, Data call type (for data call only), and
Maximum data speed (for data call only).

Connection name — Enter a descriptive name for the connection.

Prompt password — If you must enter a new password every time you log onto a

server, or if you do not want to save your password to the device, select Yes.

If necessary, to define the internet protocol (IP) version, phone IP address, domain
name system (DNS) servers, proxy server, and advanced data call settings, such as
callback, PPP compression, login script, and modem initialization string, select

Options > Advanced settings. Contact your service provider for the correct

settings.

C

F

DR

C

AF

T

Packet data

The packet data settings affect all access points using a packet data connection.

Packet data connection — If you select When available and you are in a network

that supports packet data, the device registers to the packet data network and
short messages are sent using a packet data connection. If you select When

needed, the device uses a packet data connection only if you start an application

or function that needs it. The packet data connection can be closed when it is not
needed by any application.

77

If there are no packet data services available and you have chosen When available,
the device periodically tries to establish a packet data connection.

Access point — The access point name is needed when you want to use your device

as a modem with your computer.

Data call

The data call settings affect all access points that use a GSM data call.

Online time — to set the data call to disconnect automatically after a time-out if

there is no activity. To enter a time-out, select User defined, and enter the time in
minutes. If you select Unlimited, the data call is not disconnected automatically.

SIP settings

View and edit session initiation protocol (SIP) profiles.

Configurations

Certain functions, such as web browsing and multimedia messaging, may require
configuration settings. You may receive the settings from your service provider.
See "Configuration settings," p. 14.

To delete a configuration, scroll to the configuration, and select Options > Delete.

Applications

To view and edit settings of applications installed to your device, select Menu >

Settings > Phone sett. > Applications.

■ Speed dial

To assign phone numbers to the speed dialing keys, select Menu > Settings >

Speed dial, scroll to the speed dialing key, and select Options > Assign. Select the

contact and the number for the speed dial.

To view the number assigned to a speed-dialing key, scroll to the speed dialing
key, and select Options > View number. To change or remove the number, select

Change or Remove.

FCC DRAFT

■ Speech

To select the default language and voice used for reading messages and adjust the
voice properties, such as rate and volume, select Menu > Settings > Speech.

To view details of a voice, scroll right, scroll to the voice, and select Options >

Voice details. To test a voice, scroll to the voice, and select Options > Play voice.

78

■ Settings wizard

The settings wizard configures your device for operator (MMS, GPRS, and internet)
and e-mail settings based on your service provider. Configuring other settings
may also be possible.

To use these services, you may have to contact your service provider to activate a
data connection or other services.

Select Menu > Settings > Sett. wizard.

■ Call mailbox

To define or change the call mailbox number, select Menu > Settings > Call

mailbox > Options > Define number or Change number, and enter the number.

Call mailbox is a network service. Contact your service provider for the call
mailbox number.

T

AF

■ Instant messaging

Instant messaging (IM) allows you to converse with others and join discussion
forums (IM groups) with specific topics (network service).

Check the availability of IM services, pricing, and tariffs with your service provider.
Service providers also provide instructions on how to use their services.

DR

C

Connect to an IM server

Select Menu > Settings > IM.

1. To log in, select Options > Log in.

2. Enter your user ID and password.

To log out, select Options > Log out.

IM settings

Select Menu > Settings > IM > Options > Settings.

To edit the IM application settings, select Preferences. To set who is allowed to see
when you are online, select Show my availability. To set who is allowed to send
you messages or invitations, select Allow messages from or Allow invitations from.

To edit IM server connection settings, select Servers, scroll to the server, and select

Options > Edit. Contact your service provider for the settings. To define new

server settings, select Options > New server.

C

F

79

To choose the default server, select Default server and the server.

To be automatically connected to the IM server during the days and times you
define, select IM login type > Automatic. To only be automatically connected
while in your home network, select Auto in home netw.. To be automatically
connected when you start the IM application, select On app. start-up. To connect
manually, select Manual.

To set days and times when to establish a connection automatically, select

Automatic login days and Automatic login hrs..

Join and leave an IM group

Select Menu > Settings > IM > IM groups.

IM groups are only available if supported by the service provider.

To join an IM group, select it, and enter your screen name. To join an IM group not
on the list, but whose group ID you know, select Options > Join new group, and
enter the group ID.

To leave the IM group, select Options > Leave IM group.

Search for IM groups and users

To search for groups, select Menu > Settings > IM > IM groups > Options >

Search. You can search IM groups by Group name, Topic, or Members (user ID). To

join or save a group that is found in the search, scroll to it, and select Options >

Join or Save.

To search for new contacts, select IM contacts > Options > New IM contact >

Search from server. To start a conversation with a new user, scroll to the user, and

select Options > Open conversation. To save the new contact, select Add to IM

contacts.

FCC DRAFT

Chat in an IM group

Select Menu > Settings > IM > IM groups.

After you join an IM group, you can view the messages that are exchanged in the
group, and send your own messages.

To send a message, write the message, and press the scroll key.

To send a private message to a member (if allowed in the group), select Options >

Send private message, select the recipient, write the message, and press the scroll

key.

80

To reply to a private message sent to you, scroll to the message, and select

Options > Reply.

To invite IM contacts who are online to join the IM group (if allowed in the group),
select Options > Send invitation, select the contacts you want to invite, write the
invitation message, and select Send.

Start and view individual conversations

Select Menu > Settings > IM > Conversations.

This shows a list of the IM users with whom you have an ongoing conversation.

next to a user indicates that you have received a new message from that user.

To view an ongoing conversation, select the user. To send a message, write your
message, and press the scroll key. To return to the conversations list without
closing the conversation, select Back.

To start a new conversation, select Options > New conversation > Select from

contacts and from a list of your saved IM contacts that are currently online; or

select Enter user ID to enter the user ID.

To close the conversation, select Options > End conversation.

To save a user to your IM contacts, scroll to the user, and select Options > Add to

IM contacts.

To block messages from a user, scroll to the user, and select Options > Blocking

options > Add to blocked list.

C

DR

C

AF

T

F

IM contacts

Select Menu > Settings > IM > IM contacts.

You can see a list of your saved IM contacts. indicates contacts that are
currently online, indicates contacts that are busy, and indicates contacts
that are offline.

To create a new contact manually, select Options > New IM contact > Enter

manually. Fill in the User ID and Nickname fields, and select Done.

To start or continue a conversation with a contact, scroll to the contact, and select

Options > Open conversation.

81

Create a new IM group

Select Menu > Settings > IM > IM groups > Options > Create new group. Enter
the settings for the group.

Restrict access to an IM group

To create a closed IM group, create a group members list. Only the users on the list
are allowed to join the group. Select the IM groups view, scroll to the group, and
select Options > Group > Settings > Group members > Selected only.

15. Connectivity

■ PC Suite

With PC Suite you can synchronize contacts, calendar and to-do notes and notes
between your device and a compatible PC, or a remote internet server (network
service).

You may find more information about PC Suite and the download link in the
support area on the Nokia website, www.nokia.com/support.

■ Bluetooth connection

Bluetooth technology enables wireless connections between electronic devices
within a maximum range of 10 meters (33 feet). A Bluetooth connection can be
used to send images, videos, texts, business cards, calendar notes, or to connect
wirelessly to compatible devices using Bluetooth technology, such as computers.

This device is compliant with Bluetooth Specification 2.0 supporting the following profiles:
Dial Up Networking, Serial Port, File Transfer, Handsfree, Headset, Basic Imaging, SIM
Access, Generic Access and Advanced Audio Distribution. To ensure interoperability between
other devices supporting Bluetooth technology, use Nokia approved enhancements for this
model. Check with the manufacturers of other devices to determine their compatibility with
this device.

There may be restrictions on using Bluetooth technology in some locations. Check with your
local authorities or service provider.

Features using Bluetooth technology, or allowing such features to run in the background
while using other features, increase the demand on battery power and reduce the battery
life.

FCC DRAFT

82

Bluetooth connection settings

Select Menu > Settings > Connectivity > Bluetooth.

Bluetooth — to switch Bluetooth on or off

My phone's visibility > Shown to all — to allow your device to be found by other

Bluetooth devices at all times. To allow your device to be found for a defined time
period, select Define period. For security reasons it is advisable to use the Hidden
setting whenever possible.

My phone's name — to define a name for your device.

Remote SIM mode > On — to enable the usage of the SIM card of the device by

another device (for example, a car kit) by Bluetooth technology (SIM access
profile)

When the wireless device is in the remote SIM mode, you can only use a compatible
connected enhancement, such as a car kit, to make or receive calls. Your wireless device will
not make any calls, except to the emergency numbers programmed into your device, while in
this mode. To make calls from your device, you must first leave the remote SIM mode. If the
device has been locked, enter the lock code to unlock it first.

AF

T

Send data

There can be only one active Bluetooth connection at a time.

1. Open an application where the item you wish to send is stored.

2. Scroll to the item you want to send, and select Options > Send > Via

Bluetooth.

The device starts to search for devices within range. Paired devices are shown
with .

When searching for devices, some devices may show only the unique device
addresses. To find out the unique address of your device, enter the code
*#2820# in the standby mode.

If you have searched for devices earlier, a list of the devices that were found
previously is shown first. To start a new search, select More devices.

3. Select the device with which you want to connect.

4. If the other device requires pairing, enter a passcode (1-16 digits) and agree

with the owner of the other device to use the same code.

When the connection has been successfully established, Sending data is displayed.

Data received using Bluetooth connection can be found in Inbox in Messaging.

C

F

DR

C

83

Paired devices view

Paired devices are indicated by in the search result list. In the Bluetooth main
view, scroll right to open a list of paired devices.

Do not accept Bluetooth connections from sources you do not trust.

To pair with a device, select Options > New paired device. Select the device with
which to pair. Exchange passcodes.

To cancel pairing, scroll to the device whose pairing you want to cancel and press
the clear key. If you want to cancel all pairings, select Options > Delete all.

To set a device to be authorized ( ) and automatically allow connections
between your phone and the device without accepting the connection, scroll to
the device, and select Options > Set as authorised. Use this status only for devices
you own or devices that belong to someone you trust. To disallow automatic
connections, select Set as unauthorised.

Receive data

When you receive data using Bluetooth technology, a tone sounds, and you are
asked if you want to accept the message. If you accept, the item is placed in Inbox
in Messaging.

Disconnect Bluetooth connection

A Bluetooth connection is disconnected automatically after sending or receiving
data.

FCC DRAFT

■ USB data cable

Select Menu > Settings > Connectivity > USB. To select the default USB
connection mode, select USB mode and the desired mode. To have the device ask
the purpose of the connection each time the cable is connected, select Ask on

connection > Yes.

To use the device with Nokia PC Suite, select PC Suite. To synchronize media files,
such as music, with a compatible version of Windows Media Player, select Media

player. To access files on the inserted memory card as a removable drive, select
Data transfer.

After transferring data, ensure that it is safe to unplug the USB data cable from
the PC.

84

■ Remote synchronization

Select Menu > Settings > Connectivity > Sync.

Sync enables you to synchronize your calendar, contacts, or notes with various

calendar and address book applications on a compatible computer or on the
internet. The synchronization application uses SyncML technology for
synchronization.

Create a new synchronization profile

1. If no profiles have been defined, the device asks you if you want to create a

new profile. Select Yes.

2. To create a new profile in addition to existing ones, select Options > New sync

profile. Choose whether you want to use the default setting values or copy the

values from an existing profile to be used as the basis for the new profile.

3. Define the Applications to be synchronized.

Select an application, and edit the synchronization settings:

Include in sync — to enable or disable the synchronization

Remote database — the name of the used remote database

Synchronisation type — Select Both ways for synchronization of the data on

your device and the remote database, To phone only for the synchronization of
the data on your device only, or To server only for the synchronization of the
data on the remote database only.

4. Define the Connection settings :

Server version, Server ID, Data bearer, Host address, Port, User name, and
Pass word — Contact your service provider or system administrator for the

correct settings.

Access point — Only visible if Internet is selected as Data bearer. Select an

access point you want to use for the data connection.

Allow sync requests > Yes — to allow that the server starts the synchronization

Accept all sync requests > No — to require a confirmation before the server

starts the synchronization

Network authentication — Only visible if Internet is selected as Data bearer. To

use HTTPS authentication, select Yes, and enter user name and password in

Network user name and Network password.

C

F

DR

C

AF

T

85

Synchronize data

In the main view, scroll to a profile, and select Options > Synchronise. The status
of the synchronization is shown.

After synchronization is complete, select Options > View log to open a log file
showing the synchronization status (Complete or Incomplete) and how many
calendar or contact entries have been added, updated, deleted, or discarded (not
synchronized) in the device or on the server.

■ Connection manager

Select Menu > Settings > Connectivity > Conn. mgr..

In the connection manager, you can identify the status of multiple data
connections, view details on the amount of data sent and received, and end
unused connections.

Note: The actual invoice for calls and services from your service provider may vary,
depending on network features, rounding off for billing, taxes, and so forth.

View connection details

Scroll to a connection, and select Options > Details.

End connections

To end a connection, scroll to the connection, and select Options > Disconnect.

To end all connections, select Options > Disconnect all.

FCC DRAFT

■ Push to talk

Push to talk (PTT) (network service) is a real-time voice over IP service (network
service) available over a GSM/GPRS network. PTT provides direct voice
communication connected with a single keypress.

Before you can use the PTT service, you must define the PTT access point and PTT
settings.

In PTT communication, one person talks while the others listen. Speakers take
turns responding to each other. Only one group member can talk at a time. The
length of time of each turn is limited.

Phone calls always take priority over PTT calls.

86

Besides the packet data counters, the device registers only one-to-one calls in the
recent calls lists in Log. The participants should confirm the reception of any
communications where appropriate as there is no other confirmation of whether
the recipients have heard the call.

To check availability and costs, and to subscribe to the service, contact your
service provider. Note that roaming services may be more limited than home
network services.

Many of the services available for traditional voice calls (for example, call
mailbox) are not available for PTT communications.

Define a PTT access point

Many service providers require you to use an internet access point for your default
access point. Other service providers allow you to use a WAP access point.

T

AF

Settings for PTT

For PTT service settings, contact your service provider.

To view and change PTT settings, select Menu > Settings > Connectivity > PTT >

Options > Settings > User settings or Connection settings.

User settings

Accepted list calls — To see a notification of incoming calls, select Notify. To
answer PTT calls automatically, select Auto-accept. If you do not want to receive
PTT calls, select Not allowed.

PTT call alert tone — Select the tone for incoming PTT calls. If you want the

incoming call alert setting for PTT to follow your profile settings, select Set by

profile. For example, if your profile is silent, PTT is set to do not disturb (DND) and,

except for callback requests, you are not available to others using push to talk.

Callback request tone — Select a tone for callback requests.

Application start-up — To start PTT automatically, select Always automatic. To

start PTT automatically only while in your home network, select Auto. in home

netw..

Default nickname — Enter your nickname shown to other users. Your service

provider may have disabled the editing of this option.

Show my PTT address — Select Never if you want to hide your PTT address from

others.

C

F

DR

C

87

Show my login status — Select whether your status is shown to others.

Connection settings

Contact your PTT service provider for the connection settings.

Log in to PTT

Select Menu > Settings > Connectivity > PTT, or press the my own key. PTT
automatically logs in to the service when started.

When log in is successful, PTT automatically connects to channels that were
active when the application was last closed. If the connection is lost, the device
automatically tries to log back in until you exit PTT.

indicates a PTT connection.

indicates that PTT is set to do not disturb (DND).

Exit PTT

Select Menu > Settings > Connectivity > PTT > Options > Exit. Log out from PTT

after exiting application? is displayed. Select Yes to log out and close the service.

If you want to keep the application active in the background, select No.

Make a one-to-one call

Warning: Do not hold the device near your ear when the loudspeaker is in use,

because the volume may be extremely loud.

1. Select Menu > Settings > Connectivity > PTT > Options > Contacts, scroll to

the contact you want to talk to, and press and hold my own key.

2. When the connection has been established, to talk to the other participant,

press and hold the my own key while you talk.

3. To end the PTT call, select Disconnect, or if there are several PTT calls, select

Options > Disconnect.

FCC DRAFT

Answer a PTT call

If Accepted list calls is set to Notify in User settings, a short tone notifies you of an
incoming call. To accept the call, select Accept. To silence the tone, select Silence.
To reject the call, press the end key.

88

Make a PTT group call

To call a group, select Options > Contacts, select Options > Talk to many, mark
the contacts you want to call, and press my own key.

Callback requests

Send a callback request

If you make a one-to-one call and do not get a response, you can send a request
for the person to call you back.

To send a callback request from Contacts, scroll to a contact, and select Options >

Send callback request.

T

Respond to a callback request

When someone sends you a callback request, 1 new callback request is displayed
in the standby mode. Select Show to open Callback inbox. Scroll to a contact, and
press the my own key.

Channels

When you are connected to a channel, all members joined to the channel hear you
talking. Up to five channels can be active at the same time. When more than one
channel is active, select Swap to change the channel you want to talk to.

Channels are registered with a URL address. One user registers the channel URL in
the network by joining the channel the first time.

Create your own channel

1. Select Options > PTT channels.

2. Select Options > New channel > Create new.

3. Enter a Channel name.

4. Select a Channel privacy level.

5. Enter your own nickname in Nickname.

6. If you want to add a thumbnail image to the group, select Thumbnail and an

image.

7. Select Done. When you have created a channel, you are asked if you want to

send channel invitations. Channel invitations are text messages.

C

F

DR

C

AF

89

Join a preconfigured channel

A preconfigured channel is a talk group that is set up by your service provider.
Only preconfigured users are allowed to join and use the channel.

1. Select Options > PTT channels.

2. Select Options > New channel > Add existing.

3. Enter the Channel name, Channel address, and Nickname. You can also add a

Thumbnail.

4. Select Done.

Respond to a channel invitation

To save a received channel invitation, select Options > Save channel. The channel
is added to your PTT contacts, channels view.

PTT sessions

PTT sessions are displayed as call bubbles in the PTT display, giving information
about the status of the PTT sessions:

Wait — shown when you press and hold the my own key and somebody else is still

speaking in the PTT session

Talk — shown when you press and hold the my own key and get the permission to

speak

To disconnect the selected PTT session, select Options > Disconnect.

■ Data transfer

With Data transfer, you can copy or synchronize contacts, calendar entries, and
possibly other data, such as video clips and images, from a compatible device
using a Bluetooth connection.

Depending on the other device, synchronization may not be possible and data can
be copied only once.

To transfer or synchronize data, do the following:

1. Select Menu > Settings > Connectivity > Transfer. If you have not used

Transfer before, information about the application is displayed. Select

Continue to start transferring data.

If you have used Data transfer, select Transfer data.

2. When using Bluetooth, the devices need to be paired in order to transfer data.

90

FCC DRAFT

Depending on the type of the other device, an application may be sent and
installed on the other device to enable the data transfer.

3. Select what content you want to be transferred to your device.

4. Content is transferred to your device. The transfer time depends on the amount

of data. You can stop the transfer and continue later.

16. Data manager

■ Application manager

You can install two types of applications and software to your device:

TM

J2ME

applications based on JavaTM technology with the extension .jad

or .jar. PersonalJava

Other applications and software suitable for the Symbian operating
system. The installation files have the .sis extension. Only install software
specifically designed for your device.

Installation files may be transferred to your device from a compatible computer,
downloaded during browsing, or sent to you in a multimedia message, as an
e-mail attachment, or using Bluetooth. You can use Nokia Application Installer in
Nokia PC Suite to install an application to your device or a memory card.

After you install applications to a compatible memory card, installation files (.sis) remain in
the device memory. The files may use large amounts of memory and prevent you from
storing other files. To maintain sufficient memory, use Nokia PC Suite to back up installation
files to a compatible PC, then use the file manager to remove the installation files from the
device memory. See "PC Suite," p. 82 and "File manager," p. 93. If the .sis file is a message
attachment, delete the message from the messaging inbox.

To open App. manager, select Menu > Settings > Data mgr. > App. mgr..

Install an application

Important: Only install and use applications and other software from trusted

sources, such as applications that are Symbian Signed or have passed the Java

TM

Verified

Before installation, in App. manager, scroll to the installation file, and select

Options > View details to view information such as the application type, version

number, and the supplier or manufacturer of the application.

testing.

TM

applications cannot be installed on your device.

AF

DR

C

C

F

T

91

The .jar file is required for installing Java applications. If it is missing, the device
may ask you to download it.

To install an application or software package:

1. Scroll to an installation file. Applications on the memory card are indicated

with .

2. Select Options > Install.

Alternatively, search the device memory or the memory card, select the
application, and press the scroll key to start the installation.

During the installation, the device shows information about the progress of the
installation. If you are installing an application without a digital signature or
certification, the device displays a warning. Continue installation only if you
are sure of the origins and contents of the application.

To view extra information about the application, scroll to it, and select Options >

Go to web address. This option may not be available with all applications.

To see what software packages have been installed or removed and when, select

Options > View log.

Remove an application

In the App. manager main view, scroll to the software package, and select

Options > Remove.

Application manager settings

In App. manager, select Options > Settings and from the following settings:

Software installation — to select if you want to allow installation of all Symbian

applications (All) or only signed applications (Signed only)

Online certificate check — to select if you want App. manager to check the online

certificates for an application before installing it

Default web address — default address used when checking online certificates

Java applications may attempt to, for example, establish a data connection or
send a message. To edit the permissions of an installed Java application and define
which access point the application will use, in the main view, scroll to the
application, and select Options > Open.

FCC DRAFT

92

■ File manager

Select Menu > Settings > Data mgr. > File mgr..

In the file manager, you can browse, open, and manage files and folders in the
device memory or on the memory card.

Open the file manager to see a list of the folders in the device memory. Scroll right
to see the folders on the memory card.

View memory consumption

Scroll either right or left to view the device memory or the memory card contents.
To check memory consumption of the current memory, select Options > Memory

details. The device calculates the approximate amount of free memory for storing

data and installing new applications.

In the memory views, you can view the memory consumption of the different
applications or file types. If the device memory is getting low, remove some files,
or move them to the memory card.

AF

T

■ Device manager

You may receive server profiles and configuration settings from your service
provider or company information management department.

To open Device mgr., select Menu > Settings > Data mgr. > Device mgr.. If you
have no server profiles defined, the device asks whether you want to define one.

To connect to a server and receive configuration settings for your device, scroll to
the server profile, and select Options > Start configuration.

To edit a server profile, select Options > Edit profile and from the following
settings:

Allow configuration — To receive configuration settings from the server, select
Yes.

Auto-accept all requests — If you want the device to ask for confirmation before

accepting a configuration from the server, select No.

Contact your service provider, or company information management department
for the other server profile settings.

C

F

DR

C

93

Update software

Warning: If you install a software update, you cannot use the device, even to

make emergency calls, until the installation is completed and the device is
restarted. Be sure to back up data before accepting installation of an update.

To check the current version of the software, select Menu > Settings > Data

mgr. > Device mgr. > Updates.

It is recommended to save backups of important personal information and files
(such as contacts, images and messages) either by using Nokia PC Suite or to a
memory card in your phone before updating the software.

1. Select Menu > Settings > Data mgr. > Device mgr., scroll left or right if

necessary, to select Updates, and select Options > Check for updates.

If there are updates available, the device starts downloading.

2. After a successful download, answer Yes to the confirmation query to continue

the installation. To start the installation later, select No.

To start the installation process later, select Menu > Settings > Data mgr. >

Device mgr. > Install update.

If there is one server profile defined, it is used as a default. If no server profile has
been defined, the device asks you to create one, or if there are several, to select
from a list of servers.

Contact your service provider for server profile settings.

■ Memory card

Keep all memory cards out of the reach of small children.

Select Menu > Settings > Data mgr. > Memory.

For details on inserting a memory card into the phone, see Get started p. 10.

Format memory card

When a memory card is formatted, all data on the card is permanently lost.

To format a new memory card, select Options > Format memory card > Yes. When
the formatting is complete, enter a name for the memory card.

Backup and restore information

To back up information from phone memory to the memory card, select Options >

Back up phone memory.

94

FCC DRAFT

To restore information from the memory card to the phone memory, select

Options > Restore from card.

You can only back up the phone memory and restore it to the same phone.

Lock and unlock the memory card

To set a password to help prevent unauthorized use, select Options > Set

password. You are asked to enter and confirm your password. The password can be

up to eight characters long.

If you insert another password-protected memory card into your phone, you are
prompted to enter the password of the card. To unlock the card, select Options >

Unlock memory card.

■ Activation keys

Select Menu > Settings > Data mgr. > Actv. keys to view the digital rights
activation keys stored in your device.

To view valid keys ( ) that are connected to one or more media files, select

Valid keys. Group keys, which contain several keys, are indicated with . To view

the keys contained in the group key, select the group key.

To view invalid keys ( ) with which the time period for using the file is
exceeded, select Invalid keys. To buy more usage time or extend the usage period
for a media file, scroll to a key, and select Options > Get activation key. It may not
be possible to update activation keys if web service message reception is disabled.
See "Service message settings," p. 42.

To view activation keys that are not in use, select Not in use. Unused activation
keys have no media files connected to them.

To view detailed information such as the validity status and the ability to send the
file, scroll to an activation key, and press the scroll key.

Digital rights management

Content owners may use different types of digital rights management (DRM) technologies
to protect their intellectual property, including copyrights. This device uses various types of
DRM software to access DRM-protected content. With this device you can access content
protected with OMA DRM 2.0 and OMA DRM 1.0. If certain DRM software fails to protect
the content, content owners may ask that such DRM software's ability to access new DRM­protected content be revoked. Revocation may also prevent renewal of such DRM-protected
content already in your device. Revocation of such DRM software does not affect the use of
content protected with other types of DRM or the use of non-DRM-protected content.

C

F

DR

C

AF

T

95

Digital rights management (DRM) protected content comes with an associated activation
key that defines your rights to use the content.

If your device has OMA DRM protected content, to back up both the activation keys and the
content, use the backup feature of Nokia PC Suite. Other transfer methods may not transfer
the activation keys which need to be restored with the content for you to be able to
continue the use of OMA DRM protected content after the device memory is formatted. You
may also need to restore the activation keys in case the files on your device get corrupted.

Some activation keys may be connected to a specific SIM card, and the protected content
can be accessed only if the SIM card is inserted in the device.

17. Battery information

■ Charging and discharging

Your device is powered by a rechargeable battery. The battery can be charged and
discharged hundreds of times, but it will eventually wear out. When the talk and standby
times are noticeably shorter than normal, replace the battery. Use only Nokia approved
batteries, and recharge your battery only with Nokia approved chargers designated for this
device.

If a replacement battery is being used for the first time or if the battery has not been used
for a prolonged period, it may be necessary to connect the charger, then disconnect and
reconnect it to begin charging the battery.

Unplug the charger from the electrical plug and the device when not in use. Do not leave a
fully charged battery connected to a charger, since overcharging may shorten its lifetime. If
left unused, a fully charged battery will lose its charge over time.

If the battery is completely discharged, it may take several minutes before the charging
indicator appears on the display or before any calls can be made.

Use the battery only for its intended purpose. Never use any charger or battery that is
damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic
object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (­) terminals of the battery. (These look like metal strips on the battery.) This might happen, for
example, when you carry a spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or winter
conditions, will reduce the capacity and lifetime of the battery. Always try to keep the
battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not

FCC DRAFT

96

work temporarily, even when the battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also explode if
damaged. Dispose of batteries according to local regulations. Please recycle when possible.
Do not dispose as household waste.

Do not dismantle or shred cells or batteries. In the event of a battery leak, do not allow the
liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or
eyes immediately with water, or seek medical help.

■ Nokia battery authentication guidelines

Always use original Nokia batteries for your safety. To check that you are getting an original
Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original
Enhancements logo on the packaging, and inspect the hologram label using the following
steps:

Successful completion of the four steps is not a total assurance of the authenticity of the
battery. If you have any reason to believe that your battery is not an authentic, original
Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia
service point or dealer for assistance. Your authorized Nokia service point or dealer will
inspect the battery for authenticity. If authenticity cannot be verified, return the battery to
the place of purchase.

Authenticate hologram

1. When looking at the hologram on the label, you should
see the Nokia connecting hands symbol from one angle and

C

the Nokia Original Enhancements logo when looking from

F

another angle.

DR

C

AF

T

2. When you angle the hologram left, right, down, and up,
you should see 1, 2, 3, and 4 dots on each side respectively.

97

3. Scratch the side of the label to reveal a 20-digit code, for
example, 12345678919876543210. Turn the battery so that
the numbers are facing upwards. The 20-digit code reads
starting from the number at the top row followed by the
bottom row.

4. Confirm that the 20-digit code is valid by following the
instructions at www.nokia.com/batterycheck.

What if your battery is not authentic?

If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery, please
do not use the battery. Take it to the nearest authorized
Nokia service point or dealer for assistance. The use of a
battery that is not approved by the manufacturer may be

dangerous and may result in poor performance and damage
to your device and its enhancements. It may also invalidate any approval or warranty
applying to the device.

To find out more about original Nokia batteries, visit www.nokia.com/battery.

18. Enhancements

Practical rules about accessories and enhancements

• Keep all accessories and enhancements out of the reach of small children.

• When you disconnect the power cord of any accessory or enhancement, grasp and pull

the plug, not the cord.

• Check regularly that enhancements installed in a vehicle are mounted and are operating

properly.

• Installation of any complex car enhancements must be made by qualified personnel only.

FCC DRAFT

98

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated with
care. The following suggestions will help you protect your warranty coverage.

• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can

contain minerals that will corrode electronic circuits. If your device does get wet, remove
the battery, and allow the device to dry completely before replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic

components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal temperature,

moisture can form inside the device and damage electronic circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards

and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

• Do not paint the device. Paint can clog the moving parts and prevent proper operation.

• Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and

light sensor lenses.

• Use only the supplied or an approved replacement antenna. Unauthorized antennas,

modifications, or attachments could damage the device and may violate regulations
governing radio devices.

• Use chargers indoors.

• Always create a backup of data you want to keep, such as contacts and calendar notes.

• To reset the device from time to time for optimum performance, power off the device

and remove the battery.

These suggestions apply equally to your device, battery, charger, or any enhancement. If any
device is not working properly, take it to the nearest authorized service facility for service.

C

F

DR

C

AF

T

99

Additional safety information

■ Small children

Your device and its enhancements may contain small parts. Keep them out of the reach of
small children.

■ Operating environment

This device meets RF exposure guidelines when used either in the normal use position
against the ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body.
When a carry case, belt clip, or holder is used for body-worn operation, it should not contain
metal and should position the device the above-stated distance from your body.To transmit
data files or messages, this device requires a quality connection to the network. In some
cases, transmission of data files or messages may be delayed until such a connection is
available. Ensure the above separation distance instructions are followed until the
transmission is completed.

Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not
place credit cards or other magnetic storage media near the device, because information
stored on them may be erased.

■ Medical devices

Operation of any radio transmitting equipment, including wireless phones, may interfere
with the functionality of inadequately protected medical devices. Consult a physician or the
manufacturer of the medical device to determine if they are adequately shielded from
external RF energy or if you have any questions. Switch off your device in health care
facilities when any regulations posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could be sensitive to external RF energy.

Implanted medical devices

Manufacturers of medical devices recommend that a minimum separation of

15.3 centimeters (6 inches) should be maintained between a wireless device and an
implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to
avoid potential interference with the medical device. Persons who have such devices should:

• Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical

device when the wireless device is turned on.

• Not carry the wireless device in a breast pocket.

• Hold the wireless device to the ear opposite the medical device to minimize the potential

for interference.

• Turn the wireless device off immediately if there is any reason to suspect that

interference is taking place.

FCC DRAFT

100