Microsoft RM-162, RM-162X User Manual
Nokia 6102i and Nokia 6103
User Guide
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole responsibility that the RM-161 and
RM-162 products are conformity with the provisions of the following Council Directive:
1999/5/EC. A copy of the Declaration of Conformity can be found from
http://www.nokia.com/phones/declaration_of_conformity/.
0434
The crossed-out wheeled bin means that within the European Union the product
must be taken to separate collection at the product end-of life. This applies to
your device but also to any enhancements marked with this symbol. Do not
dispose of these products as unsorted municipal waste.
PART NO. 9248317, Issue NO. 1
Copyright © 2006 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document
in any form without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, Xpress-on and Pop-Port are trademarks or registered
trademarks of Nokia Corporation. Other product and company names mentioned herein may
be trademarks or tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
US Patent No 5818437 and other pending patents. T9 text input software Copyright (C)
1997-2006. Tegic Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java is a trademark of Sun Microsystems, Inc.
The information contained in this user guide was written for the Nokia 6102i and Nokia6103
products. Nokia operates a policy of ongoing development. Nokia reserves the right to make
changes to any of the products described in this document without prior notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT AS REQUIRED BY
APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, IN CLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR
CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR
WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
EXPORT CONTROLS
This device may contain commodities, technology, or software subject to export laws and
regulations from the U.S. and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone i n close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. Operation is
subject to the condition that this device does not cause harmful interference.
The availability of particular products may vary by region. Please check with the Nokia dealer
nearest to you.
Contents
For your safety.......................... 6
===General information.......... 9
Overview of functions........................... 9
Access codes............................................ 9
Configuration settings service ........ 10
Download content and applications 11
Nokia support on the Web ............... 11
1. Get started ......................... 12
Open the fold ....................................... 12
Install the SIM card and the battery....
12
Charge the battery.............................. 13
Switch the phone on and off........... 14
Normal operating position ............... 14
Wrist strap ............................................ 14
2. Your phone......................... 15
Keys and parts...................................... 15
Standby mode ...................................... 16
Keypad lock (keyguard) ..................... 18
3. Call functions..................... 20
Make a call ........................................... 20
Answer or decline a call.................... 20
Options during a call.......................... 21
4. Write text........................... 22
Settings.................................................. 22
Predictive text input .......................... 22
Traditional text input......................... 23
5. Navigate the menus .......... 24
6. Messages ............................ 25
Text messages (SMS).......................... 25
Multimedia messages ....................... 27
Memory full .......................................... 29
Folders.................................................... 30
Nokia Xpress audio messaging........ 30
Voice messages.................................... 31
Info messages ...................................... 31
Service commands.............................. 32
Delete messages.................................. 32
Message settings................................. 32
Message counter................................. 34
7. Contacts.............................. 35
Search for a contact .......................... 35
Save names and phone numbers.... 35
Save numbers, items, or an image. 35
Copy contacts ...................................... 36
Edit contact details ............................ 36
Delete contacts or contact details. 36
Business cards...................................... 37
Settings.................................................. 37
Groups.................................................... 37
Voice dialing......................................... 37
1-touch dials........................................ 39
Info, service, and my numbers ........ 39
8. Call log................................ 40
Recent calls lists.................................. 40
Counters and timers........................... 40
9. Settings ............................. 41
Profiles ................................................... 41
Themes ................................................... 41
Tones....................................................... 41
My shortcuts ........................................ 42
Main display......................................... 42
Mini display .......................................... 43
Time and date ...................................... 43
Call .......................................................... 44
Phone...................................................... 44
Connectivity ......................................... 45
Enhancements ..................................... 49
Configuration....................................... 49
Security.................................................. 50
Restore factory settings.................... 51
4
10.Gallery ............................... 51
11.Media ................................ 52
Camera ................................................... 52
Radio ....................................................... 53
Recorder ................................................. 54
12.Organizer........................... 55
Alarm clock............................................ 55
Calendar................................................. 55
To-do list................................................ 56
Notes....................................................... 57
Synchronization ................................... 57
Calculator .............................................. 59
Stopwatch ............................................. 59
Countdown timer ................................ 60
13.Applications...................... 61
Games ..................................................... 61
Collection............................................... 61
14.Web ................................... 64
Set up browsing ................................... 64
Connect to a service........................... 64
Browse pages........................................ 65
Appearance settings ........................... 66
Cookies ................................................... 67
Scripts over secure connection ....... 67
Bookmarks ............................................. 67
Download files...................................... 68
Service inbox ........................................ 68
Cache memory...................................... 69
Browser security .................................. 69
15.SIM services....................... 72
16.PC connectivity ................. 73
PC Suite.................................................. 73
Packet data, HSCSD, and CSD.......... 73
Data communication applications . 73
17.Battery information.......... 74
Charging and discharging................. 74
Nokia battery authentication
guidelines............................................... 75
Care and maintenance ........... 77
Additional safety information 78
Index........................................ 83
5
For your safety
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in
aircraft.
SWITCH OFF WHEN REFUELLING
Do not use the phone at a refuelling point. Do not use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the phone where blasting is in
progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Do not touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
6
For your safety
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all
important information stored in your phone.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press the end key as
many times as needed to clear the display and return to the start
screen. Enter the emergency number, then press the call key. Give
your location. Do not end the call until given permission to do so.
■ About your device
The wireless device described in this guide is approved for use on the GSM 850,
1800, and1900 (type RM-162 devices) or GSM 900, 1800, and1900 (type
RM-161 devices) networks. Contact your service provider for more information
about networks.
When using the features in this device, obey all laws and respect the privacy and
legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
■ Network services
To use the phone you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to
function. These network services may not be available on all networks or you may
have to make specific arrangements with your service provider before you can
utilize network services. Your service provider may need to give you additional
instructions for their use and explain what charges will apply. Some networks
may have limitations that affect how you can use network services. For instance,
some networks may not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Your
device may also have been specially configured for your network provider. This
7
For your safety
configuration may include changes in menu names, menu order and icons.
Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP
protocols. Some features of this device, such as text messages, multimedia
messages, audio messages, mobile Internet services, content and application
download, and synchronization with a remote Internet server, require network
support for these technologies.
■ Shared memory
The phone has two memories. The following features may share the first memory:
contacts, text messages, multimedia messages (without attachments), groups,
voice commands, calendar, and to-do notes. The second shared memory is used
by files stored in Gallery, attachments of multimedia messages, and Java
applications. Use of one or more of these features may reduce the memory
available for the remaining features sharing memory. For example, saving many
Java applications may use all of the available memory. Your device may display a
message that the memory is full when you try to use a shared memory feature. In
this case, delete some of the information or entries stored in the shared memory
features before continuing. Some of the features, such as text messages, may
have a certain amount of memory specially allotted to them in addition to the
memory shared with other features.
TM
■ Enhancements
A few practical rules about accessories and enhancements are as follows:
• Keep all accessories and enhancements out of the reach of small children.
• When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
• Installation of any complex car enhancements must be made by qualified
personnel only.
8
General information
General information
■ Overview of functions
Your phone provides many functions that are practical for daily use,
such as a calendar, a clock, an alarm clock, a radio, and a built-in
camera. Your phone also supports the following functions:
• Enhanced data rates for GSM evolution (EDGE). See “Packet data
(EGPRS),” p. 46.
• Extensible hypertext markup language (XHTML). See “Web,” p. 64.
• Audio messaging. See “Nokia Xpress audio messaging,” p. 30.
• Bluetooth technology. See “Bluetooth wireless technology,” p. 44.
• Java 2 Platform, Micro Edition (J2ME
■ Access codes
Security code
The security code (5 to 10 digits) helps to protect your phone against
unauthorized use. The preset code is 12345. To change the code and to
set the phone to request the code, see “Security,” p. 49.
PIN codes
The personal identification number (PIN) code and the universal
personal identification number (UPIN) code (4 to 8 digits) help to
protect your SIM card against unauthorized use. See “Security,” p. 49.
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is
required for some functions.
The module PIN is required to access the information in the security
module. See “Security module,” p. 69.
The signing PIN is required for the digital signature. See “Digital
signature,” p. 70.
TM
). See “Applications,” p. 61.
9
General information
PUK codes
The personal unblocking key (PUK) code and the universal personal
unblocking key (UPUK) code (8 digits) is required to change a blocked
PIN code and UPIN code, respectively. The PUK2 code (8 digits) is
required to change a blocked PIN2 code. If the codes are not supplied
with the SIM card, contact your local service provider for the codes.
Restricting password
The restricting password (4 digits) is required when using Call
restrictions. See “Security,” p. 49.
■ Configuration settings service
To use some of the network services, such as mobile Internet services,
MMS, Nokia Xpress audio messaging, or remote Internet server
synchronization, your phone needs the correct configuration settings.
You may be able to receive the settings directly as a configuration
message. After receiving the settings, you need to save them on your
phone. The service provider may provide a PIN that is needed to save the
settings. For more information on availability, contact your service
provider, nearest authorized Nokia dealer, or visit the support area on
the Nokia Web site, <www.nokia.com/support>.
When you receive a configuration message, Configuration sett. received
is displayed.
To save the settings, select Show > Save. If the phone requests Enter
settings' PIN:, enter the PIN code for the settings, and select OK. To
receive the PIN code, contact the service provider that supplies the
settings. If no settings are saved, these settings are saved and set as
default configuration settings. Otherwise, the phone asks Activate saved
configuration settings?.
To discard the received settings, select Exit or Show > Discard.
To edit the settings, see “Configuration,” p. 48.
10
General information
■ Download content and applications
You may be able to download new content (for example, themes) to the
phone (network service). Select the download function (for example, in
Gallery). To access the download function, see the respective menu
descriptions. For the availability of different services, pricing, and tariffs,
contact your service provider.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
■ Nokia support on the Web
Check <www.nokia.com/support> or your local Nokia Web site for the
latest version of this guide, additional information, downloads, and
services related to your Nokia product.
11
Get started
1. Get started
■ Open the fold
When you open the fold of the phone, it
opens up to approximately 155 degrees.
Do not try to force the fold open more.
■ Install the SIM card and battery
Always switch the device off and disconnect the charger before removing the
battery.
Keep all SIM cards out of the reach of small children. For availability and
information on using SIM card services, contact your SIM card vendor. This may
be the service provider, network operator, or other vendor.
This device is intended for use with BL-4C battery.
The SIM card and its contacts are easily damaged by scratches or
bending, so be careful when handling, inserting, or removing the card.
To remove the back cover of the phone press the
release button (1), and slide the back cover to
remove it from the phone (2).
Remove the battery as
shown(3). Release the SIM card
holder (4).
12
Get started
Insert the SIM card (5). Make sure that the SIM
card is properly inserted, and that the
gold-colored contact area on the card is facing
downwards. Close the SIM card holder (6), and
press it until it snaps into position.
Replace the battery (7).
Observe the battery
contacts. Always use original
Nokia batteries. See “Nokia
battery authentication
guidelines,” p. 75.
Slide the back cover into its
place (8, 9).
■ Charge the battery
Warning: Use only batteries, chargers, and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
Check the model number of any charger before use with this device. This device is
intended for use when supplied with power from an AC-3, AC-4, and DC-4
charger, and from AC-1, ACP-7, ACP-12, and LCH-12 charger when used with the
charger adapter CA-44.
For availability of approved enhancements, please check with your dealer.
1. Connect the charger to a wall socket.
2. Connect the lead from the charger to the
socket on the bottom of your phone.
If the battery is completely discharged, it
may take a few minutes before the charging
indicator appears on the display or before
any calls can be made.
The charging time depends on the charger and the battery used. For
example, charging a BL-4C battery with the AC-3 charger takes
approximately 2 hours and 12 minutes while the phone is in the standby
mode.
13
Get started
■ Switch the phone on and off
Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
Press and hold the power key. See “Keys and parts,” p. 15.
If the phone asks for a PIN or a UPIN code, enter the code (displayed as
****), and select OK.
Plug and play service
When you switch on your phone for the first time, and the phone is in
the standby mode, you are asked to get the configuration settings from
your service provider (network service). Confirm or decline the query.
See Connect to service provider support, p. 49, and “Configuration
settings service,” p. 10.
■ Normal operating position
Use the phone only in its normal operating
position.
Your device has an external antenna.
Note: As with any other radio transmitting
device, do not touch the antenna
unnecessarily when the device is switched on.
Contact with the antenna affects call quality
and may cause the device to operate at a
higher power level than otherwise needed. Avoiding contact with the antenna
area when operating the device optimizes the antenna performance and the
battery life.
■ Wrist strap
Remove the back cover and the battery.
Insert the strap as shown in the picture.
Replace the battery and the back cover.
14
2. Your phone
■ Keys and parts
• Earpiece (1)
• Main display (2)
• Left selection key (3)
• Middle selection key (4)
• Right selection key (5)
• Volume key (6)
• 4-way scroll key (7)
• Call key (8)
• Camera release key (9)
• Infrared (IR) port (10)
• End and power key (11)
• Charger connector (12)
• Pop-Port
• Microphone (14)
• Loudspeaker (15)
• Camera lens (16)
TM
connector (13)
Your phone
• Mini display (17)
The keypad on your phone may differ slightly
from the illustration.
15
Your phone
Warning: The side keys (6), and (9), and the antenna cap of this
device may contain nickel. These parts are not designed for
prolonged contact with the skin. Continuous exposure to nickel
on the skin may lead to a nickel allergy.
■ Standby mode
When the phone is ready for use, and you have not entered any
characters, the phone is in the standby mode.
Mini display
When the fold is closed, the mini display may show the following:
• The signal strength of the cellular network at your current location
and the battery charge level
• The name of the network. If the phone is not in service, it is indicated
by a text note.
• The time, the active profile, and the alarm clock or calendar note
alerts
When you have an incoming call, the caller’s name or number is shown
if it is identified.
Main display
In the standby mode, the main display may show the following:
• Name of the network or the operator
logo (1)
• Signal strength of the cellular network at
your current location (2)
• Battery charge level (3)
• Function of the left selection key is Go
to (4).
• Function of the middle selection key is
Menu (5)
16
Your phone
• Function of the right selection key is Names (6) or another shortcut
to a function that you selected. See “My shortcuts,” p. 41. Operator
variants may have an operator-specific name to access an
operator-specific Web site.
Personal shortcut list
The left selection key is Go to.
To view the functions in the personal shortcut list, select Go to. To
activate a function select it.
To view a list with available functions, select Go to > Options > Select
options. To add a function to the shortcut list, select Mark. To remove a
function from the list, select Unmark.
To rearrange the functions on your personal shortcut list, select Go to >
Options > Organize. Select the desired function, Move, and the place
where you want to move the function.
Shortcuts in the standby mode
• To access the list of dialed numbers, press the call key once. Scroll to
the number or name that you want; to call the number, press the call
key.
• To open the web browser, press and hold 0.
• To call your voice mailbox, press and hold 1.
• Use the scroll key as a shortcut. See “My shortcuts,” p. 41.
Power saving
A digital clock view overwrites the display when no
function of the phone has been used for a certain
period of time. To activate the power saver, see
Powe r sav er in “Main display,” p. 41, and “Mini
display,” p. 42. To deactivate the power saver, open
the fold, or press any key.
17
Your phone
Indicators
You received one or several text or picture messages. See “Read
and reply to a SMS message,” p. 26.
You received one or several multimedia messages. See “Read
and reply to a multimedia message,” p. 28.
The phone logged a missed call. See “Call log,” p. 39.
The keypad is locked. See “Keypad lock (keyguard),” p. 18.
The phone does not ring for an incoming call or text message
when Incoming call alert and Message alert tone are set to Off.
See “Tones,” p. 40.
The alarm clock is set to On. See “Alarm clock,” p. 55.
When the packet data connection mode Always online is
selected and the packet data service is available, the indicator is
shown. See “Packet data (EGPRS),” p. 46.
A packet data connection is established. See “Packet data
(EGPRS),” p. 46 and “Browse pages,” p. 65.
The packet data connection is suspended (on hold), for example,
if there is an incoming or outgoing call during a packet data
dial-up connection.
When the infrared connection is activated, the indicator is
shown continuously.
Bluetooth connection indicator. See “Bluetooth wireless
technology,”, p. 44.
■ Keypad lock (keyguard)
To prevent the keys from being accidentally pressed, select Menu, and
press
within 3.5 seconds to lock the keypad.
*
To unlock the keypad, select Unlock, and press
keyguard is set On, enter the security code if requested.
18
. If the Security
*
Your phone
To answer a call when the keyguard is on, press the call key. When you
end or decline the call, the keypad automatically locks.
For Automatic keyguard and Security keyguard, see “Phone,” p. 43.
When the keyguard is on, calls still may be possible to the official emergency
number programmed into your device.
19
Call functions
3. Call functions
■ Make a call
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the
+ character replaces the international access code) and then enter
the country code, the area code without the leading 0, if necessary,
and the phone number.
2. To call the number, press the call key.
3. To end the call or to cancel the call attempt, press the end key, or
close the phone.
To make a call using names, search for a name or phone number in
Contacts, see “Search for a contact,” p. 34. Press the call key to call the
number.
To access the list of up to 20 numbers you last called or attempted to
call, press the call key once in the standby mode. To call the number,
select a number or name, and press the call key.
1-touch dialing
Assign a phone number to one of the 1-touch-dialing keys, 2 to 9. See
“1-touch dials,” p. 38. Call the number in either of the following ways:
• Press a 1-touch-dialing key, then the call key.
•If 1-touch dialing is set to On, press and hold a 1-touch-dialing key
until the call begins. See 1-touch dialing in “Call,” p. 43.
■ Answer or decline a call
To answer an incoming call, press the call key, or open the phone. To end
the call, press the end key, or close the phone.
To decline an incoming call when the phone is open, press the end key,
or close the phone. To decline an incoming call when the phone is
closed, open the phone, and press the end key within 1.5 seconds.
20
Call functions
To mute the ringing tone, press one of the volume keys, or select Silence.
Tip: If the Forward if busy function is activated to forward the
calls (for example, to your voice mailbox) declining an incoming
call also forwards the call. See “Call,” p. 43.
If a compatible headset supplied with the headset key is connected to
the phone, to answer and end a call, press the headset key.
Call waiting
To answer the waiting call during an active call, press the call key. The
first call is put on hold. To end the active call, press the end key.
To activate the Call waiting function, see “Call,” p. 43.
■ Options during a call
Many of the options that you can use during a call are network services.
For availability, contact your network operator or service provider.
During a call, select Options and from the following options:
Call options are Mute or Unmute, Contacts, Menu, Record, Lock keypad,
Auto volume on, Loudspeaker or Handset.
Network services options are Answer and Decline, Hold or Unhold, New
call, Add to conference, End call, End all calls, and the following:
Touch tones — to send tone strings
Swap — to switch between the active call and the call on hold
Transfer calls — to connect a call on hold to an active call and
disconnect yourself
Conference — to make a conference call that allows up to five persons to
take part in a conference call
Private call —to discuss privately in a conference call
Warning: Do not hold the device near your ear when the loudspeaker
is in use, because the volume may be extremely loud.
21
Write text
4. Write text
You can enter text (for example, when writing messages) using
traditional or predictive text input. When using traditional text input,
press a number key, 1 to 9, repeatedly until the desired character
appears. In predictive text input you can enter a letter with a single
keypress.
When you are writing text, predictive text input is indicated by
and traditional text input by at the top left of the display. ,
, or appear next to the text input indicator, indicating the
character case.
To change the character case and the text input mode, press #.
indicates number mode. To change from the letter to number mode,
press and hold #, and select Number mode.
■ Settings
To set the writing language, select Options > Writing language.
Predictive text input is only available for the languages listed.
Select Options > Dictionary on to set the predictive text input or
Dictionary off to set traditional text input.
■ Predictive text input
Predictive text input is based on a built-in dictionary to which you can
also add new words.
1. Start writing a word using the 2 to 9 keys. Press each key only once
for a single letter. The word changes after each keypress.
2. When you have finished writing the word and it is correct, to confirm
it, press 0 to add a space, or press the scroll key. Scroll to move the
cursor.
If the word is not correct, press
Matches. When the word that you want appears, confirm it.
repeatedly, or select Options >
*
22
Write text
If ? is displayed after the word, the word you intended to write is not
in the dictionary. To add the word to the dictionary, select Spell.
Enter the word (traditional text input is used), and select Save.
3. Start writing the next word.
Write compound words
Enter the first part of the word, and press the scroll key right to confirm
it. Write the next part of the word, and confirm the word.
■ Traditional text input
Press a number key, 1 to 9, repeatedly until the desired character
appears. Not all characters available under a number key are printed on
the key. The characters available depend on the writing language. See
“Settings,” p. 22.
If the next letter you want is located on the same key as the present one,
wait until the cursor appears, or press the scroll key and enter the letter.
The most common punctuation marks and special characters are
available under the 1 key.
23
Navigate the menus
5. Navigate the menus
The phone offers you an extensive range of functions, which are
grouped into menus.
1. To access the menu, select Menu. To change the menu view, select
Options > Main menu view > List or Grid.
2. Scroll through the menu, and select a submenu (for example,
Settings).
3. If the menu contains submenus, select the one that you want (for
example, Call).
4. If the selected menu contains further submenus, select the one that
you want (for example, Anykey answer).
5. Select the setting of your choice.
6. To return to the previous menu level, select Back. To exit the menu,
select Exit.
24
Messages
6. Messages
The message services can only be used if they are supported by your
network or your service provider.
Note: When sending messages, your phone may display the words
Message sent. This is an indication that the message has been sent by
your device to the message center number programmed into your
device. This is not an indication that the message has been received at
the intended destination. For more details about messaging services,
check with your service provider.
Important: Exercise caution when opening messages. Messages may
contain malicious software or otherwise be harmful to your device or
PC.
Only devices that have compatible features can receive and display
messages. The appearance of a message may vary depending on the
receiving device.
■ Text messages (SMS)
Using the short message service (SMS) you can send and receive
multipart messages made of several ordinary text messages (network
service) that can contain pictures.
Before you can send any text, picture, or e-mail message, you must save
your message center number. See “Message settings,” p. 32.
To check SMS e-mail service availability and to subscribe to the service,
contact your service provider.
Your device supports the sending of text messages beyond the character limit for
a single message. Longer messages will be sent as a series of two or more
messages. Your service provider may charge accordingly. Characters that use
accents or other marks, and characters from some language options like Chinese,
take up more space limiting the number of characters that can be sent in a single
message.
At the top of the display, you can see the message length indicator that
tracks the number of characters available. For example, 10/2 means that
you can still add 10 characters for the text to be sent as two messages.
25
Messages
Write and send a SMS message
1. Select Menu > Messages > Create message > Text message.
2. Enter a message. See “Write text,” p. 22. To insert text templates or a
picture into the message, see “Templates,” p. 27. Each picture
message comprises several text messages. Sending one picture or
multipart message may cost more than sending one text message.
3. To send the message, select Send > Recently used, To phone number,
To many, or To e-mail address. To send a message using a predefined
message profile, select Via sending profile. For the message profile,
see “Text and SMS,” p. 32. Select or enter a phone number or e-mail
address, or select a profile.
Read and reply to a SMS message
is shown when you receive an SMS message or an SMS e-mail. The
blinking indicates that the message memory is full. Before you can
receive new messages, delete some of your old messages in the Inbox
folder.
1. To view a new message, select Show. To view it later, select Exit.
To read the message later, select Menu > Messages > Inbox. If more
than one message is received, select the message that you want to
read. indicates an unread message.
2. While reading a message, select Options, and delete or forward the
message; edit the message as a text message or an SMS e-mail,
rename the message you are reading, or move it to another folder; or
view or extract message details. You can also copy text from the
beginning of the message to your phone calendar as a reminder note.
To save the picture in the Templates folder when reading a picture
message, select Save picture.
3. To reply as a message, select Reply > Text message, Multimedia msg.,
Flash message, or Audio message. Enter the reply message. When
replying to an e-mail, first confirm or edit the e-mail address and
subject.
4. To send the message to the displayed number, select Send > OK.
26
Messages
Templates
Your phone has text templates and picture templates that you
can use in text, picture, or SMS e-mail messages.
To access the template list, select Menu > Messages > Saved items >
Text messages > Templates.
■ Multimedia messages
A multimedia message can contain text, sound, a picture, a calendar
note, a business card, or a video clip. If the message is too large, the
phone may not be able to receive it. Some networks allow text messages
that include an Internet address where you can view the multimedia
message.
You cannot receive multimedia messages during a call, a game, another
Java application, or an active browsing session over GSM data. Because
delivery of multimedia messages can fail for various reasons, do not rely
solely upon them for essential communications.
Write and send a multimedia message
To set the settings for multimedia messaging, see “Multimedia,” p. 32.
To check availability and to subscribe to the multimedia messaging
service, contact your service provider.
1. Select Menu > Messages > Create message > Multimedia msg..
2. Enter a message. See “Write text,” p. 22.
To insert a file, select Options > Insert and from the following
options:
Image, Sound clip or Video clip — to insert a file from Gallery
New image opens the Camera — to take a new image to be added to
the message
New sound clip opens the Recorder — to make a new record to be
added to the message
Business card or Calendar note — to insert a business card or a
calendar note in the message
27
Loading...