Microsoft RM-132X User Manual

Download

Nokia N73 User Guide

Nota: La traducción en español de este manual inicia en la Página 117.

9250265

ISSUE 2 EN

DECLARATION OF CONFORMITY

0434

Hereby, NOKIA CORPORATION declares that this RM-132 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at

http://www.nokia.com/phones/declaration_of_conformity/

The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. This applies to your device but also to any enhancements marked w ith this symbol. Do not dispose of these products as unsorted municipal waste.

Copyright © 2006 Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia, Nokia Connecting People, Pop-Port, and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Nokia tune is a sound mark of Nokia Corporation.

Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved. US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2006. Tegic Communications, Inc. All rights reserved.

Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided ‘as is’. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves t he right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

EXPORT CONTROLS

This device may contain commodities, technology, or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada ca n require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service fac ility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.

Issue 2 EN, 9250265

Contents

Get connected............................................6

For your safety...........................................7

Your Nokia N73...................................... 10

Charge the battery..............................................................10

Settings ..................................................................................10

Transfer content from another device...........................10

Essential indicators .............................................................11

Volume and loudspeaker control ....................................12

Multimedia key ....................................................................12

Headset...................................................................................13

Memory card tool................................................................13

File manager .........................................................................14

Download! .............................................................................15

Games .....................................................................................15

Support .................................................... 16

Nokia support and contact information .......................16

Help .........................................................................................16

Tutorial ...................................................................................16

Camera......................................................17

Take pictures......................................................................... 17

Take pictures in a sequence ............................................. 22

You in the picture—self-timer......................................... 23

Record videos ....................................................................... 23

Gallery.......................................................26

View and browse files........................................................26

Albums ...................................................................................28

Edit images ...........................................................................29

Edit video clips..................................................................... 29

Slide show............................................................................. 31

Presentations........................................................................ 31

Image print ...........................................................................31

PrintOnline ............................................................................32

Online sharing......................................................................33

Media applications ..................................36

Music player ......................................................................... 36

Flash Player...........................................................................37

Visual Radio .......................................................................... 38

RealPlayer.............................................................................. 40

Movie director...................................................................... 42

Time management...................................44

Clock....................................................................................... 44

Calendar................................................................................. 45

Messaging ................................................47

Write text.............................................................................. 48

Write and send messages ................................................. 49

Inbox—receive messages................................................... 52

Mailbox.................................................................................. 53

View messages on a SIM card......................................... 55

Messaging settings............................................................. 55

Contacts (Phonebook).............................60

Save and edit names and numbers................................ 60

Copy contacts ...................................................................... 61

Add ringing tones for contacts ....................................... 62

Create contact groups ....................................................... 62

Make calls................................................63

Calls ........................................................................................ 63

Answer or decline a call.................................................... 65

Log........................................................................................... 66

Web browsers .......................................... 68

Services...................................................................................68

Web .........................................................................................71

Connections .............................................73

Bluetooth connectivity.......................................................73

Infrared connection ............................................................76

Data cable..............................................................................77

PC connections.....................................................................77

Connection manager ..........................................................78

Synchronization ...................................................................78

Device manager....................................................................79

Office........................................................ 80

Calculator ..............................................................................80

Converter ...............................................................................80

Notes.......................................................................................80

Recorder .................................................................................81

Quickoffice ............................................................................81

Adobe Reader........................................................................82

Personalize your device........................... 84

Profiles—set tones ...............................................................84

3-D tones...............................................................................85

Change the look of your device...................................... 86

Active standby mode ......................................................... 87

Tools ......................................................... 88

Settings.................................................................................. 88

Voice commands ................................................................. 96

Application manager.......................................................... 97

Digital Rights Management............................................. 99

Troubleshooting: Q&A..........................100

Product safety.......................................103

Battery information ......................................................... 103

Nokia battery authentication guidelines ...................104

Care and maintenance .................................................... 105

Additional safety information....................................... 106

Technical Information ..................................................... 109

Index.......................................................111

Get connected

Use your device on the 2G network. See "About your device," p. 8.

Use Bluetooth technology, for example, to transfer files and connect to compatible enhancements. See "Bluetooth connectivity," p. 73.

Use infrared to transfer and synchronize data between compatible devices, for example. See "Infrared connection," p. 76.

Use Nokia Connectivity Cable CA-53 (provided in the standard sales package) to connect to compatible devices, such as printers and PCs. See "Data cable," p. 77.

Use Nokia miniSD card to transfer data or back up information, for example. See "Memory card tool," p. 13.

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY Do not switch the device

on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST Obey all local

laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE All wireless devices may be

susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS Follow any

restrictions. Switch the device off near medical equipment.

SWITCH OFF IN AIRCRAFT Follow any

restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING Do not use

the device at a refueling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING Follow any

restrictions. Do not use the device where blasting is in progress.

USE SENSIBLY Use only in the normal position

as explained in the product documentation. Do not touch the antenna unnecessarily.

QUALIFIED SERVICE Only qualified personnel

may install or repair this product.

ENHANCEMENTS AND BATTERIES Use only

approved enhancements and batteries. Do not connect incompatible products.

WATER-RESISTANCE Your device is not

water-resistant. Keep it dry.

BACK-UP COPIES Re member to make back-up

copies or keep a written record of all important information.

CONNECTING TO OTHER DEVICES When

connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

For your safety

EMERGENCY CALLS Ensure the phone function

of the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call

For your safety

until given permission to do so.

About your device

The wireless device described in this guide is approved for use on the EGSM 850/900/1800/1900 networks. Contact your service provider for more information about networks.

Your device supports Internet connections and other methods of connectivity. Like computers, your device may be exposed to viruses, malicious messages and applications, and other harmful content. Exercise caution and open messages, accept connectivity requests, download content, and accept installations only from trustworthy sources. To increase the security of your device, consider installing an antivirus software with a regular update service and use a firewall application.

When using the features in this device, obey all laws, and respect privacy and legitimate rights of others.

When taking and using images or video clips, obey all laws, and respect local customs as well as privacy and legitimate rights of others, including copyright.

Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.

Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.

The Quickoffice applications in your device support common features of Microsoft Word, PowerPoint, and Excel (Microsoft Office 2000, XP, and 2003). Not all file formats can be viewed or modified.

Network services

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail, and content downloading using the browser or over MMS, require network support for these technologies.

For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.

Enhancements, batteries, and chargers

Always switch the device off, and disconnect the charger before removing the battery.

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from a DC-4, AC-3, or AC-4 charger and from an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-9, or LCH-12 charger when used with the CA-44 charger adapter.

The battery intended for use with this device is BP-6M.

Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

For your safety

Your Nokia N73

Model number: Nokia N73-5 Hereinafter referred to as Nokia N73.

Charge the battery

Your Nokia N73

1 Connect a compatible charger to a wall outlet. 2 Connect the power cord to the device. If the battery

is completely discharged, it may take a while before the charging indicator starts scrolling.

3 When the battery is fully charged, disconnect the

charger from the device, then from the wall outlet.

Settings

Your Nokia N73 normally has MMS, GPRS, streaming, and mobile Internet settings automatically configured in the device, based upon your service provider or network operator information. You may have settings from your service providers already installed in your device, or you may receive the settings from the service providers as a special text message.

Transfer content from another device

You can transfer content, such as contacts, free of charge from a compatible Nokia device to your Nokia N73 using Bluetooth connectivity or infrared. The type of content that can be transferred depends on the phone model. If the other device supports synchronization, you can also synchronize data between the other device and your Nokia N73.

Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.

You can insert your SIM card in the other device. When Nokia N73 is switched on without a SIM card, the offline profile is automatically activated.

Transfer content 1 To use the application for the first time, press ,

and select Tools > Transfer. If you have used the application before and want to start a new transfer, select Transfer data.

In the information view, select Continue.

2 Select whether you want to use Bluetooth connectivity

or infrared to transfer the data. Both devices must support the selected connection type.

3 If you select Bluetooth connectivity:

To have Nokia N73 search for devices with Bluetooth connectivity, select Continue. Select your other device from the list. You are asked to enter a code on your Nokia N73. Enter a code (1-16 digits), and select OK. Enter the same code on the other device, and select OK. The devices are now paired. See "Pair devices," p. 75.

For some phone models, the Transfer application is sent to the other device as a message. To install Transfer on the other device, open the message, and follow the instructions on the display.

If you select infrared, connect the two devices. See "Infrared connection," p. 76.

4 From your Nokia N73, select the content you want

to transfer from the other device.

Content is transferred from the memory of the other device to the corresponding location in your Nokia N73. Transferring time depends on the amount of data to be transferred. You can cancel transferring and continue later.

If the other device supports synchronization, you can keep the data up-to-date in both devices. To start a synchronization with a compatible Nokia device, select

Phones, scroll to the device, and select Options > Synchronize. Follow the instructions on the display.

To view the log of a previous transfer, select Transfer log.

Essential indicators

The device is being used in a GSM network. You have one or more unread messages in the

Inbox folder in Messag..

You have received new e-mail in the remote mailbox.

There are messages waiting to be sent in the

Outbox folder.

You have missed calls. Shown if Ringing type is set to Silent and

Message alert tone, and E-mail alert tone

are set to Off. The device keypad is locked. A clock alarm is active. The second phone line is being used (network

service). All calls to the device are forwarded to another

number. If you have two phone lines (network service), the indicator for the first line is and for the second .

A compatible headset is connected to the device. The connection to a compatible headset with

Bluetooth connectivity has been lost.

Your Nokia N73

A compatible loopset is connected to the device. A compatible TTY is connected to the device. A data call is active. A GPRS or EDGE packet data connection is

available. A GPRS or EDGE packet data connection is active.

Your Nokia N73

A GPRS or EDGE packet data connection is on hold.

Bluetooth connectivity is on. Data is being transmitted using Bluetooth

connectivity. A USB connection is active. An infrared connection is active. If the indicator

is blinking, the device is trying to connect to the other device or the connection has been lost.

Volume and loudspeaker control

To increase or decrease the volume level when you have an active call or are listening to a sound, press the volume key.

The built-in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear.

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

To use the loudspeaker during a call, select Options >

Activate loudsp..

To turn off the loudspeaker, select Options >

Activate handset.

Multimedia key

With the Multimedia key, you have a quick access to multimedia content and predefined applications.

To open the shortcut assigned to the multimedia key, press and hold . To open a list of multimedia applications, press . To open the desired application, use the scroll key. To exit the list without selecting an application, press .

To change the shortcuts, press , and . To change the applications that are shown when you press , select Top, Left, Middle, and Right and the application.

Some shortcuts may be fixed, and you are not able to change them.

Headset

Connect a compatible headset to the Pop-Port connector of your device.

Warning:

When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.

Memory card tool

Use only miniSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards but not all other brands may function correctly or be fully compatible with this device.

Use only compatible miniSD cards with this device. Other memory cards, such as Reduced Size MultiMediaCards, do not fit in the memory card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.

Press , and select Tools > Memory. You can use a compatible miniSD card as extra storage space and for backing up the information in the device memory.

To back up information from the device memory to a compatible memory card, select Options > Backup

phone mem.

To restore information from the compatible memory card to the device memory, select Options > Restore from card.

To eject the memory card, press , and select Remove

mem. card.

Important: Do not remove the memory card in

the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.

Set a password

To set a password to protect your memory card, select

Options > Set password. You can use up to 8 characters

in the password. To change the password, select Options > Change password. To remove the password, select Options > Remove password.

Your Nokia N73

Format a memory card

When a memory card is reformatted, all data on the card is permanently lost.

Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it.

Your Nokia N73

To format a memory card, select Options > Format mem.

card. Select Yes to confirm.

File manager

To move or copy files to a folder, press and at the same time to mark a file, and select Options > Move to

folder or Copy to folder.

To find a file, select Options > Find and the memory from which to search, and enter a search text that matches the file name.

View memory consumption

To view what types of data you have in the device and how much memory the different data types consume, select

Options > Memory details. The amount of available free

memory is shown in Free memory.

Many features of the device, such as contacts, messages, images, videos, ringing tones, calendar notes, documents, and downloaded applications, use memory to store data. The free memory available depends on how much data is already saved in the device memory.

You can use a compatible memory card as extra storage space. Memory cards are rewritable, so you can delete old information and save new data on a memory card.

To browse files and folders in the device memory or on a memory card (if inserted), press , and select Tools >

File mgr.. The device memory view ( ) opens. Press

to open the memory card view ( ), if available.

Memory low—free memory

The device notifies you if the device or the memory card memory is low.

To free device memory, transfer data to a compatible memory card, if you have one. Mark files to be moved, and select Move to folder > Memory card, and a folder.

Tip! You can use Nokia Phone Browser available in Nokia PC Suite to view the different memories in your device and transfer data.

To remove data to free memory, use File mgr., or go to the respective application. For example, you can remove the following:

• Messages from Inbox, Drafts, and Sent folders in Messag.

• Retrieved e-mail messages from the device memory

• Saved Web pages

• Saved images, videos, or sound files

• Contact information

• Calendar notes

• Downloaded applications. See also "Application manager," p. 97.

• Any other data that you no longer need

Download!

Download! (network service) is a mobile content shop

available on your device. You can browse, download, and install items, such as applications and media files, to your device from the Internet.

The items are categorized under catalogs and folders provided by different service providers. Some items may be chargeable, but you can usually preview them free of charge.

Press , and select Download! For details, see the Additional applications leaflet.

Games

Press , and select Games and a game. For instructions on how to play the game, select Options > Help.

Your Nokia N73

Support

Nokia support and contact information

Check www.nokiausa.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.

On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia contact centers at www.nokiausa.com/support

For maintenance services, check your nearest Nokia service center at www.nokiausa.com/support

Help

Your device has context-sensitive help. When an application is open, select Options > Help to access help for the current view.

When you are reading the instructions, to switch between help and the application that is open in the background, press and hold .

To open help from the main menu, select Applications >

Help. Select the desired application to view its help topics.

Tutorial

The tutorial gives you information about some of the features of your device. To access the tutorial in the menu, press , and select Applications > Tutorial and the section you want to view.

Camera

Your Nokia N73 has two cameras, a high resolution camera on the back of the device (the main camera) and a lower resolution camera on the front (the secondary camera). You can use both cameras to take still pictures and record videos. The camera is landscape mode. The secondary camera on the front is used in portrait mode, and the main camera on the back in landscape mode.

The Nokia N73 device supports an image capture resolution of 2048x1536 pixels using the main camera. The image resolution may appear different.

The images and video clips are automatically saved in the Imgs. & video folder in

Gallery. The camera produces

.jpeg images. Video clips are recorded in the .mp4 file format, or in the 3GPP file format with the .3gp file extension (Sharing quality). See "Video settings," p. 25.

You can send images and video clips in a multimedia message, as an e-mail attachment, or by using Bluetooth connectivity. You can also upload them to your online album. See "Online sharing," p. 33.

Take pictures

When taking a picture, note the following:

• Use both hands to keep the camera still.

• The quality of a digitally zoomed picture is lower than that of a nonzoomed picture.

• The camera goes into the battery saving mode if there are no keypresses for a moment. To continue taking pictures, press .

To take a picture, do the following: 1 To activate the main camera, open the slide. If the

camera is in Video mode, select Image mode from the active toolbar.

2 To lock the focus on an object, press the capture key

halfway down (main camera only). The green locked focus indicator appears on the display. If the focus was not locked, the red focus indicator appears. Release the capture key, and press it halfway down again. You can, however, take the picture without locking the focus.

3 To take a picture, in the main camera, press the capture

key. Do not move the device before the image is saved.

To zoom in or out, use the zoom key on the side of your device.

Camera

You can make lighting and color adjustments before taking a picture by using the scroll key to scroll through the active toolbar. See "Setup settings—Adjust color and lighting," p. 21.

Camera

Saving the captured image may take longer if you change the zoom, lighting, or color settings.

To free memory before taking a picture, select Options >

Go to free memory (only available if you have backed

up images or video clips). See "Free memory," p. 28. To activate the front camera, select Options >

Use secondary camera.

To close the main camera, close the slide.

Still image camera indicators

The still image camera viewfinder displays the following:

• The current capture mode indicator (1).

• The active toolbar (2), which you can scroll through before capturing the image to activate the self-timer or sequence mode, or select the capturing mode, scene, flash mode, white balance, exposure compensation, color tone, and light sensitivity (the active toolbar is not displayed during focus and image capture). See "Active toolbar," p. 19.

• The image resolution indicator (3) indicates whether the quality of the image is Print

3M - Large

(2048x1536 resolution), Print

2M - Medium (1600x1200 resolution), Print/e-mail

0.8M - Small (1280x960 resolution), or Multimedia message 0.3M (640x480 resolution).

• The image counter (4) displays the estimated number of images you can capture using the current image quality setting and memory in use (the counter is not displayed during focus and image capture).

• The device memory ( ) and memory card ( ) indicators (5) show where images are saved.

To display all viewfinder indicators, select Options > Show

icons. To display only the camera status indicators, select Hide icons.

Active toolbar

In the camera, you can use active toolbar as a shortcut to select items and adjust different settings before and after taking a picture or recording a video. In the active toolbar, scroll to different items, and select them by pressing the scroll key. The available options vary depending on the capture mode and state you are in. You can also define whether the active toolbar is always visible on the display or activated by a key press.

If you want the active toolbar to be visible on the display before and after taking a picture or recording a video, select Options > Show icons.

If you want the active toolbar to be visible only a while when you need it, select Options > Hide icons. You can activate the active toolbar by pressing the scroll key.

Before taking a picture or recording a video, in the active toolbar, select from the following:

to switch between the video and image modes

to select the scene

to select the flash mode

to activate the self-timer (images only). See "You in the picture—self-timer," p. 23.

to activate the sequence mode (images only). See "Take pictures in a sequence," p. 22.

to adjust the exposure compensation (images only)

to adjust white balance

to select a color effect

to adjust light sensitivity

The icons change to reflect the current status of the setting. The available options may vary depending on the view

you are in. See also active toolbar options in "After taking a picture,"

p. 20, "After recording a video," p. 24, and "Active toolbar," p. 27 in Gallery.

Camera

After taking a picture

After you take the picture, select the following from the active toolbar (available only if Show captured image

Camera

is set to Yes in Still image camera settings):

• If you do not want to keep the image, select Delete.

• To send the image using multimedia, e-mail, Bluetooth connectivity, or infrared, or upload it to your online album, press the call key, or select Send. For more information, see "Messaging," p. 47, "Bluetooth connectivity," p. 73, and "Online sharing," p. 33. This option is not available during an active call.

• To tag images to the Print Basket for later printing, select Add to Print Basket.

• To print the picture, select Print. See "Image print," p. 31.

• To capture a new image, select New image.

To rename the image, select Options > Rename image. To use the picture as wallpaper in the active standby,

select Options > Set as wallpaper. To set the image as a call image for a contact, select

Set as contact call img..

Still image camera settings

There are two kinds of settings for the still image camera:

Image setup and main settings. To adjust Image setup, see

"Setup settings—Adjust color and lighting," p. 21. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following:

Image quality—Print 3M - Large-Large (2048x1536

resolution), Print 2M - Medium (1600x1200 resolution),

Print/e-mail 0.8M - Small (1280x960 resolution), or Multimedia message 0.3M (640x480 resolution). The

better the image quality, the more memory the image consumes. If you want to print the image, select Print 3M

- Large, Print 2M - Medium, or Print/e-mail 0.8M Small. If you want to send it through e-mail, select Print/ e-mail 0.8M - Small. To send the image through MMS,

select Multimedia message 0.3M. These resolutions are only available in the main camera.

Add to album—Select whether you want to save the image

to a certain album in the gallery. If you select Yes, a list of available albums opens.

Show captured image—Select Yes if you want to see

the captured image after it is taken, or No if you want to continue taking pictures immediately.

Default image name—Define the default name for the

captured images.

Extended digital zoom (main camera only)—Select On to

allow the zoom increments to be smooth and continuous between digital and extended digital zoom. If you want to limit the zoom to where the selected image quality is maintained, select Off.

Capture tone—Select the tone you want to hear when

you take a picture.

Memory in use—Select where to store your images. Restore camera settings—Select OK to return the default

values to the camera settings.

Flash

The flash is available only in the main camera. Keep a safe distance when using the flash. Do not use the

flash on people or animals at close range. Do not cover the flash while taking a picture.

The camera has an LED flash for low light conditions. The following flash modes are available for the still image camera: Automatic (), Red eye reduct. (), On (), and Off ( ); and for the video recorder: Video light on ().

To change the flash mode, in the active toolbar, select the desired flash mode.

Setup settings—Adjust color and lighting

To enable the camera to reproduce colors and lighting more accurately, or to add effects to your pictures or videos, use the scroll key to scroll through the active toolbar, and select from the following options:

White balance—Select the current lighting condition

from the list. This allows the camera to reproduce colors more accurately.

Exposure compensation (images only)—Adjust the exposure

time of the camera.

Color tone—Select a color effect from the list. Light sensitivity (images only)—Select the light sensitivity

of the camera. The darker the environment, the higher the light sensitivity should be.

The available settings vary depending on the selected camera. The screen display changes to match any settings you

make, so that you see how the change affects the pictures or videos.

The setup settings are camera specific; if you change the settings in the secondary camera, the settings in the main camera do not change. The setup settings transfer between the image and video modes. The setup settings return to the default settings when you close the camera.

Camera

If you select a new scene, the color and lighting settings are replaced by the selected scene. See "Scenes," p. 22. You can change the setup settings after selecting a scene if needed.

Camera

Scenes

A scene helps you to find the right color and lighting settings for the current environment. Select a proper scene for taking pictures or recording video clips from the scene list. The settings of each scene have been set according to a certain style or environment.

Scenes are only available in the main camera. Use the scroll key to scroll through the active toolbar,

and select from the following options:

Video scenes

Automatic ( )(default) and Night ()

Image scenes

Auto () (default), User defined (), Close-up mode(), Portrait (), Landscape (), Sports (), Night (), and Night portrait ().

When you take pictures, the default scene is Auto. You can select the User defined scene as the default scene.

To make your own scene suitable for a certain environment, scroll to User defined, and select Options >

Change. In the user defined scene you can adjust different

lighting and color settings. To copy the settings of another scene, select Based on scene mode and the desired scene.

Take pictures in a sequence

Scenes are only available in the main camera. To set the camera to take six pictures or more in a sequence

(if enough memory available), in the active toolbar, select

Switch to sequence mode.

To take six pictures, press the capture key. To take more than six pictures, press and hold the capture key. To stop taking pictures, release the capture key. You can capture up to 100 images, depending on the available memory.

After you take the pictures, they are shown in a grid on the display. To view a picture, press to open it.

You can also use the sequence mode with the self-timer. When using the self-timer, the maximum amount of pictures is six pictures.

To return to the sequence mode viewfinder, press the capture key.

You in the picture—self-timer

The self-timer is available only in the main camera. Use the self-timer to delay the capture so that you can

include yourself in the picture. To set the self-timer delay, in the active toolbar, select Self timer > 2 seconds,

10 seconds, or 20 seconds. To activate the self-timer,

select Activate. The self-timer indicator ( ) blinks and the device beeps when the timer is running. The camera takes the picture after the selected delay elapses.

To switch off Self timer, in the active toolbar, select

Self timer > Off.

You can also use the self-timer in the sequence mode.

Tip! In the active toolbar, select Self timer >

2 seconds to keep your hand steady when taking

apicture.

Record videos

1 To activate the camera, open the slide. If the camera

is in the Image mode, select Video mode from the active toolbar.

2 Press the capture key to start recording. In the portrait

mode, use the scroll key for recording. The red record icon is shown and a tone sounds, indicating that recording has started.

3 Select Stop to stop recording. The video clip is

automatically saved to the Imgs. & video folder of

Gallery. See "Gallery," p. 26. The maximum length of

the video is 60 minutes (if enough memory available).

To pause recording at any time, press Pause. The pause icon ( ) blinks on the display. Video recording automatically stops if recording is set to pause and there are no keypresses within a minute. Press the capture key again to resume recording.

To zoom in or out of the subject, press the zoom key on the side of the device.

To make lighting and color adjustments before recording a video, use the scroll key to scroll through the active toolbar. See "Setup settings—Adjust color and lighting," p. 21 and "Scenes," p. 22.

To free memory before recording a video, select Options >

Go to free memory (only available if you have backed

up images or video clips). See "Free memory," p. 28. To activate the front camera, select Options >

Use secondary camera.

Camera

Video capture indicators

The video viewfinder displays the following:

• The current capture mode indicator (1).

Camera

• The audio mute on indicator (2).

• The active toolbar (3), which you can scroll through before recording to select the scene, white balance, and color tone (the toolbar is not displayed during recording).

• The total available video recording time (4). When you are recording, the current video length indicator also shows the elapsed time and time remaining.

• The device memory ( ) and memory card ( ) indicators (5) show where videos are saved.

• The video quality indicator (6) indicates whether the quality of the video is High, Normal, or Sharing.

• The video clip file type (7).

To display all viewfinder indicators, select Options > Show

icons. Select Hide icons to display only the video status

indicators, and during the recording, the available record time, zoom bar when zooming, and the selection keys.

To activate the front camera, select Options >

Use secondary camera.

After recording a video

After you record a video clip, select the following from the active toolbar (available only if Show captured video is set to Yes in Video settings):

• To immediately play the video clip you just recorded,

select Play.

• If you do not want to keep the video, select Delete.

• To send the video clip using multimedia, e-mail, Bluetooth connectivity, or infrared, or upload it to your online album, press the call key, or select Send. For more information, see "Messaging," p. 47, "Bluetooth connectivity," p. 73, and "Online sharing," p. 33. This option is not available during an active call. You cannot send video clips saved in the .mp4 file format in a multimedia message.

• To record a new video clip, select New video.

To rename the video, select Options > Rename video.

Video settings

There are two kinds of settings for the video recorder:

Video setup and main settings. To adjust Video setup

settings, see "Setup settings—Adjust color and lighting," p. 21. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following:

Video quality—Set the quality of the video clip to High

(best quality for long term usage and playback on a compatible TV or PC and handset), Normal (standard quality for playback through your handset), or Sharing (limited video clip size to send using multimedia message). If you want to view the video on a compatible TV or PC, select High, which has CIF resolution (640x480) and the .mp4 file format. You cannot send video clips saved in the .mp4 file format in a multimedia message. To send the video clip through MMS, select Sharing (QCIF resolution, .3gp file format). The size of the video clip recorded with

Sharing is limited to 300 KB (about 20 seconds in duration)

so that it can be conveniently sent as a multimedia message to a compatible device.

Video stabilization—Select On to reduce camera shake

when recording the video.

Audio recording—Select On if you want to record both

image and sound.

Add to album—Select whether you want to add the recorded

video clip to a certain album in Gallery. Select Yes to open a list of available albums.

Show captured video—Select whether you want the first

frame of the recorded video clip to be shown on the display after the recording stops. Select Play from the active toolbar (main camera) or Options > Play (secondary camera) to view the video clip.

Default video name—Define the default name for the

captured video clips.

Memory in use—Define the default memory store: device

memory or memory card (if inserted).

Restore camera settings—Select OK to return the default

values to the camera settings.

Camera

Gallery

To store and organize your images, video clips, sound clips, playlists, and streaming links, press , and select Gallery.

Tip! If you are in another application, to view the last stored picture in Gallery, press the review key

Images & video folder main view, press the review

key again.

on the side of your device. To enter the

View and browse files

Select Images & video , Tracks , Sound clips , Streaming links , Presentations , or All files

, and press to open it.

You can browse and open folders; and mark, copy, and move items to folders. You can also create albums; and mark, copy, and add items to albums. See "Albums,", p. 28.

Files stored on your compatible memory card (if inserted) are indicated with .

To open a file, press . Video clips, .ram files, and streaming links are opened and played in RealPlayer, and music and sound clips in Music player. See "RealPlayer," p. 40, and "Music player," p. 36.

To copy or move files to the memory card (if inserted) or to device memory, select a file and Options > Move and

copy > Copy to memory card or Move to memory card,

or Copy to phone mem. or Move to phone mem.. To download tracks or sound clips into Gallery using the

browser, in the Tracks or Sound clips folders, select Track

downl., or Sound downl.. To download images or videos,

in the Images & video folder, select the download icon. The browser opens, and you can select a bookmark from which the site can download.

Images and video clips

Pictures taken and video clips recorded with the camera are stored in the Images & video folder in Gallery. Images and video clips can also be sent to you in a multimedia message, as an e-mail attachment, through Bluetooth connectivity, or by using infrared. To be able to view a received image or video clip in Gallery or in the media player, you must save it in the device memory or on a memory card (if inserted).

Open the Images & video folder in Gallery. The images and video clip files are in a loop, and ordered by date. The number of files is displayed. To browse the files one by one, scroll left or right. To browse files in groups, scroll up or down.

When the image is opened, to zoom in an image, press the zoom key on the side of your device. The zooming ratio is shown on the lower left part of the display. The zooming ratio is not stored permanently.

To rotate the selected image left or right, select

Options > Rotate.

To edit a video clip or a photo, select Options > Edit. An image editor or a video editor opens. See "Edit video clips," p. 29. See "Edit images," p. 29.

To create custom video clips, select a video clip or several clips in the gallery, and select Options > Edit. See "Edit video clips," p. 29.

To print your images on a compatible printer, or to store them on your memory card (if inserted) for printing, select

Options > Print. See "Image print," p. 31. You can also tag

images for later printing to the Print Basket in Gallery. See "Print Basket," p. 28.

To add an image or a video clip to an album in the gallery, select Options > Albums > Add to album. See "Albums," p. 28.

To use the picture as a background image, select the picture and Options >Use image > Set as wallpaper.

To delete an image or video clip, press .

Active toolbar

In the Images & video folder, you can use active toolbar as a shortcut to select different tasks. The active toolbar is available only when you have selected an image or a video clip.

In the active toolbar, scroll up or down to different items, and select them by pressing the scroll key. The available options vary depending on the state you are in and on whether you have selected an image or a video clip. You can also define whether the active toolbar is always visible on the display or activated by a key press.

If you want the active toolbar to be visible on the display, select Options > Show icons.

If you want the active toolbar to be visible only a while when you need it, select Options > Hide icons. To activate the active toolbar, press the scroll key.

Select from the following:

to play the selected video clip to send the selected image or video clip

/ to add or remove an image from the Print Basket.

See "Print Basket," p. 28. to view the images in the Print basket to start a slide show of the images in the selected

album

Gallery

to delete the selected image or video clip to print the viewed image

Gallery

to reduce the resolution of the selected image to free memory for new images. See "Free memory," p. 28.

The available options may vary depending on the view you are in.

Free memory

To reduce the resolution and file size of images saved in

Gallery and free memory for new pictures, select Options > Shrink. To back up the images first, copy them to a compatible

PC or other location. Selecting Shrink reduces the resolution of an image to 640x480.

To increase free memory space after you have copied items to other locations or devices, select Options > Free memory. You can browse a list of files you have copied. To remove a copied file from Gallery, select Options > Delete.

Print Basket

You can tag images to the Print Basket, and print them later with a compatible printer or in a compatible printing kiosk, if available. See "Image print," p. 31. The tagged images are indicated with in the Images & video folder and albums.

To tag an image for later printing, select an image, and

Add to Print Basket from the active toolbar.

To view the images in the Print Basket, select View Print

Basket from the active toolbar, or select the Print Basket

icon from the Images & video folder (available only when you have added pictures to the Print Basket).

To remove an image from the Print Basket, select an image in the Images & video folder or in an album, and Remove

from print from the active toolbar.

Albums

With albums you can conveniently manage your images and video clips. To view the albums list, in the Images

&video folder, select Options > Albums > View albums.

To add a picture or a video clip to an album in the gallery, scroll to a picture or video clip, and select Options >

Albums > Add to album. A list of albums opens. Select the

album to which you want to add the picture or video clip, and press .

To remove a file from an album, press . The file is not deleted from the Images & video folder in Gallery.

To create a new album, in the albums list view, select

Options > New album.

Edit images

To edit the pictures after taking them, or the ones already saved in Gallery, select Options > Edit.

Select Options > Apply effect to open a grid where you can select different edit options indicated by small icons. You can crop and rotate the image; adjust the brightness, color, contrast, and resolution; and add effects, text, clip art, or a frame to the picture.

Crop image

To crop an image, select Options > Apply effect > Crop. To crop the image size manually, select Manual or select a predefined aspect ratio from the list. If you select Manual, a cross appears in the upper left corner of the image. Move the scroll key to select the area to crop, and select Set. Another cross appears in the lower right corner. Again select the area to be cropped. To adjust the first selected area, select Back. The selected areas form a rectangle, which forms the cropped image.

If you selected a predefined aspect ratio, select the upper left corner of the area to be cropped. To resize the highlighted area, use the scroll key. To freeze the selected area, press

. To move the area within the picture, use the scroll key.

To select the area to be cropped, press .

Reduce redness

To reduce redness of the eyes in an image, select Options >

Apply effect > Red eye reduction. Move the cross onto

the eye, and press . A loop appears on the display. To resize the loop to fit the size of the eye, move the scroll key. To reduce the redness, press .

Useful shortcuts

Shortcuts in the image editor:

• To view an image in the full screen, press . To return to the normal view, press again.

• To rotate an image clockwise or counterclockwise, press or .

• To zoom in or out, press or .

• To move on a zoomed image, scroll up, down, left, or right.

Edit video clips

To edit video clips in Gallery and create custom video clips, scroll to a video clip, and select Options > Edit > Merge,

Add sound, Add text, or Cut. See "Gallery," p. 26.

Tip! You can use Movie director to create custom

video clips. Select the video clips and images you want to create a muvee with and select Options >

Edit > Create muvee. See "Movie director," p. 42.

Gallery

The video editor supports video file formats 3gp and .mp4, and sound file formats .aac, .amr, .mp3 and .wav.

The custom video clips are automatically saved in the

Gallery

Images & video in Gallery. The clips are saved on the

memory card. If the memory card is not available, the device memory is used.

Add images, video, sound, and text

You can add images, video clips, and text to a video clip selected in Gallery to create custom video clips.

To combine an image or a video clip with the selected video clip, in the Images & video folder, select Options >

Edit > Merge > Image or Video clip. Select the desired file,

and press Select. To add a new sound clip and replace the original sound clip

in the video clip, select Options > Edit > Add sound and asound clip.

To add text to the beginning or the end of the video clip, select Options > Edit > Add text to:, enter the text you want to add, and press OK. Then select where you want to add the text: Beginning or End.

Cut video clip

You can trim the video clip, and add start and end marks to exclude parts from the video clip. In the Images & video folder, select Options > Edit > Cut.

To play the selected video clip from the start, select

Options > Play.

Tip! To take a snapshot of a video clip, press the

edit key.

To select which parts of the video clip are included in the custom video clip, and define the start and end points for them, scroll to the desired point on the video, and select

Options > Start mark or End mark. To edit the start or end

point of the selected part, scroll to the desired mark, and press the scroll key. You can then move the selected mark forwards or backwards on the timeline.

To remove all the marks, select Options > Remove >

All marks.

To preview the video clip, select Options > Play marked

section. To move on the timeline, scroll left or right.

To stop playing the video clip, press Pause. To continue playing the clip, select Options > Play. To return back to the cut video view, press Back.

To save the changes, and return to Gallery, press Done.

Send videos

To send the video, select Options > Send > Via multimedia,

Via e-mail, Via Bluetooth, Via infrared, or Upload.

Contact your network operator or service provider for details of the maximum multimedia message size that you can send. If your video is too large to send in a multimedia message, appears.

Tip! If you want to send a video clip that is over the

maximum multimedia message size allowed by your service provider, you can send the clip using Bluetooth wireless technology. See "Send data using Bluetooth connectivity," p. 75. You can also transfer your videos to a compatible PC using Bluetooth connectivity, a USB data cable, or by using a compatible memory card reader enhancement (sold separately).

Slide show

In the active toolbar, select Slide show to view a slide show of images in full screen. The slide show starts from the selected file. Select from the following:

• Pause—to pause the slide show

• Continue—to resume the slide show, if paused

• End—to close the slide show To browse the images, press (previous) or (next)

(available only when Zoom and pan is off). To adjust the tempo of the slide show, before starting the

slide show, select Options > Slide show > Settings >

Delay between slides.

To make the slide show move smoothly from one slide to another, and let the gallery randomly zoom in and out in the images, select Zoom and pan.

To add sound to the slide show, select Options >

Slide show > Settings and from the following:

• Music—Select On or Off.

• Track—Select a music file from the list.

To decrease or increase the volume, use the volume key on the side of your device.

Presentations

With presentations, you can view SVG (scalable vector graphics) files, such as cartoons and maps. SVG images maintain their appearance when printed or viewed with different screen sizes and resolutions. To view SVG files, select the Presentations folder, scroll to an image, and select Options > Play.

To zoom in, press . To zoom out, press . To switch between full screen and normal screen, press .

Image print

To print images with Image print, select the image you want to print, and the print option in the gallery, camera, image editor, or image viewer.

Use Image print to print your images using the USB data cable supplied with your device, Bluetooth connectivity, or a compatible memory card (if available).

Gallery

You can only print images that are in .jpeg format. The pictures taken with the camera are automatically saved in .jpeg format.

Gallery

To print to a printer compatible with PictBridge, connect the data cable before you select the print option.

Printer selection

When you use Image print for the first time, a list of available compatible printers is displayed after you select the image. Select a printer. The printer is set as the default printer.

If you have connected a printer compatible with PictBridge using Nokia Connectivity Cable CA-53, the printer is automatically displayed.

If the default printer is not available, a list of available printing devices is displayed.

To change the default printer, select Options > Settings >

Default printer.

Print preview

The print preview view opens only when you start printing an image in the gallery.

The selected images are displayed using predefined layouts. To change the layout, scroll left and right through the available layouts for the selected printer. If the images do not fit on a single page, scroll up or down to display the additional pages.

Print settings

The available options vary, depending on the capabilities of the printing device you selected.

To set a default printer, select Options > Default printer. To select the paper size, select Paper size, the size of paper

from the list, and OK. Select Cancel to return to the previous view.

PrintOnline

Note: The availability of this service may vary

according to your country or sales area, and the service may only be available in a limited number of languages.

With the PrintOnline application you can order prints of your images online directly to your home, or to a store where you can pick them up. You can also order different products with the selected image, such as mugs or mouse pads. The available products depend on the service provider.

In order to use PrintOnline, you must have at least one printing service configuration file installed. The files can be obtained from printing service providers that support

PrintOnline.

You will be charged data costs for sending your images to the service. The costs may increase when you are sending images for uploading while you are roaming outside your home operator network. See "Network," p. 96 for roaming.

Order prints

You can only print images that are in .jpeg format. Press , and select Gallery > Images & video.

1 Select an image or images in Gallery, and Options >

Print > Order prints.

2 Select a service provider from the list. 3 Select Options and from the following:

Open to start the connection to the service provider.

Info to view information about the service provider, for

example, the address of a store, contact details, and

Web links to more information on the service provider.

Remove to remove the service provider from the list.

Log to view the details of the previous orders.

4 If the service provided is a single shop service, you

are connected to the service provider, and the images

preview view displays the images you selected in Gallery.

Select Options and from the following:

Preview to view the image before ordering a print.

Scroll up or down to view the images.

Order now to submit your order.

Change product order to adjust the product details

and number of copies for the selected image. In the

product order view, you can select which product and

of what type you want to order. The available options

and products vary depending on the service provider.

Scroll left or right to view and change the image details of the other images.

Change customer info to change the customer and

order information.

Add image to add more images to the order. Remove image to remove images from the order.

5 If the service offered is a retailer group service, you are

connected to the service provider, and need to select a store from where you want to collect your prints. The images preview view displays the images you selected in Gallery. Depending on the service provider, you may have options for browsing and searching stores with different search criteria. You can check details, such as opening hours of the selected store, by selecting Options > Info (if provided by the service provider). Scroll to the desired retail pick up point, and press the scroll key. You can preview the images before ordering, change image details or customer information, or add or remove images from the order. To order the prints, select Options > Order now.

Online sharing

Note: The availability of this service may vary

according to your country or sales area, and the service may only be available in a limited number of languages.

Gallery

With the Online sharing application, you can share your images and videos in online albums, weblogs, or in other online sharing services on the Web. You can upload content,

Gallery

save unfinished posts as drafts and continue later, and view the content of the albums. The supported content types may vary depending on the service provider.

Get started

To use Online sharing, you must subscribe to the service with an online image sharing service provider. You can usually subscribe to the service on the Web page of the service provider. Contact your service provider for details on subscribing to the service. For more information on compatible service providers, see

www.nokiausa.com/support

When you open the service for the first time in the Online

sharing application, you are prompted to create a new

account and define the user name and password for it. You can access the account settings later through Options >

Settings in the Online sharing application. See "Online

sharing settings," p. 35.

Upload files

Press , and select Gallery > Images & video, the files you want to upload, and Options > Send > Web upload. You can access the Online sharing application also from the camera.

The Select service view opens. To create a new account for a service, select Options > Add new account or the service icon with the text Create account in the services list. If you have created a new account offline, or modified an account or service settings through a Web browser on a compatible PC, to update the services list in your device, select Options > Retrieve services. To select a service, press the scroll key.

When you select the service, the selected images and videos are shown in the edit state. You can open and view the files, reorganize them, add text to them, or add new files.

To cancel the Web upload process, and save the created post as a draft, select Back > Save as draft. If the uploading has already started, select Cancel > Save as draft.

To connect to the service and upload the files to the Web, select Options > Upload, or press .

Open online service

To view uploaded images and videos in the online service, and draft and sent entries in your device, in the Images &

video folder, select Options > Open online service. If you

have created a new account offline, or modified an account or service settings through a Web browser on a compatible PC, to update the services list in your device, select

Options > Retrieve services. Select a service from the list.

After you open a service, select from the following:

• Open in Web browser—to connect to the selected

service and view the uploaded and draft albums in the

Web browser. The view may vary depending on the

service provider.

• Drafts—to view and edit the draft entries, and upload

them to the Web

• Sent—to view the 20 latest entries created through

your device

• New post—to create a new entry The available options may vary depending on the service

provider.

Online sharing settings

To edit the Online sharing settings, in the Online sharing application, select Options > Settings.

My accounts

In My accounts, you can create new accounts or edit existing accounts. To create a new account, select Options >

Add new account. To edit an existing account, select an

account and Options > Edit. Select from the following:

Account name—to enter the desired name for the account Service provider—to select the service provider you want to

use. You cannot change the service provider for an existing account, you must create a new account for the new service

provider. If you delete an account in My accounts, the services related to the account are also deleted from you device, including the sent items for the service.

User name and Password—to enter the user name and

password you created for your account when you registered to the online service

Upload image size—to select the size in which the images

are uploaded to the service

Application settings

Display image size—to select the size in which the image

is shown on the display of your device. This setting does not affect the upload image size.

Display text size—to select the font size used to display

text in draft and sent entries, or when you add or edit text to a new entry

Advanced

Service providers—to view or edit service provider settings,

add a new service provider, or view details of a service provider. If you change the service provider, all the My

accounts information for the previous service provider

is lost. You cannot change the settings of predefined service providers.

Default access point—to change the access point used

to connect to the online service, select the access point you want.

Gallery

Media applications

Music player

Press , and select Music player. With the music player, you can play music files and create and listen to playlists.

Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Add music

When you open the music player for the first time, the player searches the device memory for music files to create a music library.

After you add or remove music files in the device, update your music library. Select Options > Music library >

Options > Update Music library.

Tip! You can transfer music files from your device

to a compatible memory card (if inserted) with Nokia Audio Manager available in Nokia PC Suite.

Play music

When you open the music player, the previously played track or playlist is displayed. To view the music library, select or Options >

Music library and the desired

song list. To start playing the songs in the view, select

Options > Play.

When a song is playing, to change between play and pause, press or .

To stop a song, press . To fast forward or rewind, press and hold or . To start playing the next or previous song, press or .

To view the currently played song list, select or Options >

Open 'Now playing'. To save the song list as a playlist,

select Options > Add to track list, and create a new playlist, or select a saved playlist.

To adjust the volume, use the volume key on the side of your device.

To select between random play and normal play mode, select Options > Random play. To select whether playing stops at the end of the playlist or restarts from its beginning, select Options > Loop.

Tip! To leave the application open and music playing in the background, press twice to return to the standby mode. To return to the application, press , and select Music player.

To open your Web bookmarks for downloading music, select Options > Track downloads.

To return to the standby mode and leave the music playing in the background, select Options > Play in background.

Music library

To view the music library, select Options > Music library.

All tracks lists all music. To view sorted songs, select Albums, Artists, Genres, or Composers. The album, artist,

genre, and composer information is collected from the ID3 or M4A tags of the song files, if available.

To add songs, albums, artists, genres or composers to a playlist, select the items and Options > Add to track list. You can create a new playlist or add to an existing one.

To view playlists, select Track lists. To create a new playlist, select Options > New track list. When viewing a playlist you have created yourself, to add more songs, select

Options > Add tracks.

To delete a playlist, press . Deleting a playlist only deletes the playlist, not the music files.

Flash Player

With Flash Player, you can view, play, and interact with compatible flash files made for mobile devices.

Organize flash files

Press , and select Applications > Flash Player. Scroll right.

To open a folder or play a flash file, scroll to it, and press the scroll key.

To send a flash file to a compatible device, scroll to it, and press the call key.

To copy a flash file to another folder, select Options >

Organize > Copy to folder.

To move a flash file to another folder, select Options >

Organize > Move to folder.

To create a folder to organize your flash files, select

Options >Organize > New folder.

The available options may vary. To delete a flash file, scroll to it, and press .

Media applications

Play flash files

Press , and select Applications > Flash Player. Scroll to a flash file, and press the scroll key.

To increase or decrease the volume, use the volume key on the side of your device.

If available, select Options and from the following:

Pause—to pause the playback

Media applications

Stop—to stop the playback Quality—to select the playback quality. If the playback

appears uneven and slow, select Normal or Low.

Full screen—to play the file using the entire display.

To return to the normal screen, select Normal screen. Even though they are not visible in full screen, the key

functions may still be available when you press either selection key.

Fit to screen—to play the file in its original size after

zooming it

Pan mode on—to be able to move around the display

with the scroll key when you have zoomed in

Visual Radio

Press , and select Applications > Radio. You can use the application as a traditional FM radio with automatic tuning and saved stations, or with parallel visual information related to the radio program on the display, if you tune to stations that offer Visual Radio service. The Visual Radio service uses packet data (network service). You can listen to the FM radio while using other applications.

If you do not have access to the Visual Radio service, the operators and radio stations in your area may not support Visual Radio. The Visual Radio service may not be available in all areas and countries.

You can normally make a call or answer an incoming call while listening to the radio. The radio is muted when there is an active call.

The radio selects the used frequency band based on the country information received from the network. If this information is not available, you may be asked to select the region you are located in, or you can select the region in the Visual Radio settings. See "Settings," p. 40.

Listen to the radio

Note that the quality of the radio broadcast depends on the coverage of the radio station in that particular area.

The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly.

Press , and select Applications > Radio. To start a station search, select or . To change the frequency manually, select Options > Manual tuning.

If you have previously saved radio stations, select or

to go to the next or previous saved station, or press the corresponding number key to select the memory location of a station.

To adjust the volume, press the volume keys. To listen to the radio using the loudspeaker, select Options >

Activate loudspeaker.

Warning: Listen to music at a moderate level.

Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

To view available stations based on location, select

Options > Station directory (network service).

To save the current tuned station to your station list, select

Options > Save station. To open the list of your saved

stations, select Options > Stations. To return to the standby mode and leave the FM radio playing

in the background, select Options > Play in background.

View visual content

To check availability and costs, and to subscribe to the service, contact your network operator or service provider.

To view available visual content for a tuned station, select

or Options > Start visual service. If the visual service

ID has not been saved for the station, enter it, or select

Retrieve to search for it in the station directory (network

service). When the connection to the visual service is established,

the display shows the current visual content. To adjust display settings for the visual content view,

select Options > Display settings.

Saved stations

You can save up to 20 radio stations in the radio. To open your station list, select Options > Stations.

To listen to a saved station, select Options > Station >

Listen. To view available visual content for a station with

Visual Radio service, select Options > Station > Start

visual service.

To change station details, select Options > Station > Edit.

Media applications

Settings

Select Options > Settings and from the following:

Start-up tone—Select whether a tone is played when the

application is started.

Auto-start service—Select Yes to have the Visual Radio

service start automatically when you select a saved station that offers Visual Radio service.

Access point—Select the access point used for the data

Media applications

connection. You do not need an access point to use the application as an ordinary FM radio.

Current region—Select the region you are currently

located in. This setting is displayed only if there was no network coverage when the application was started.

RealPlayer

Press , and select Applications > RealPlayer. With

RealPlayer, you can play video clips, or stream media files

over the air. You can activate a streaming link when you browse Web pages, or store it in the device memory or a compatible memory card (if inserted).

RealPlayer supports files with extensions such as .3gp,

.mp4 or .rm. However, RealPlayer does not necessarily support all file formats or all the variations of file formats. For example, RealPlayer attempts to open all .mp4 files,

but some .mp4 files may include content that is not compliant with 3GPP standards and, therefore, is not supported by this device.

Play video clips

1 To play a media file stored in device memory, or on the

memory card (if inserted), select Options > Open and from the following:

Most recent clips—to play one of the last six files

played in RealPlayer

Saved clip—to play a file saved in Gallery.

See "Gallery," p. 26.

2 Scroll to a file, and press to play the file. Shortcuts during play:

• To fast forward, press and hold .

• To rewind through the media file, press and hold .

• To mute the sound, press and hold the volume key on the side of your device down until is displayed. To turn on the sound, press and hold the volume key up until you see .

Stream content over the air

Many service providers require you to use an Internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point.

The access points may be configured when you first start your device.

Contact your service provider for more information. In RealPlayer, you can only open an rtsp:// URL address.

However, RealPlayer recognizes an http link to a .ram file. To stream content over the air, select a streaming link saved

in Gallery, on a Web page, or received in a text message or multimedia message. Before live content begins streaming, your device connects to the site and starts loading the content. The content is not saved in your device.

Proxy settings

Use proxy—To use a proxy server, select Yes. Proxy serv. address—Enter the IP address of the proxy server. Proxy port number—Enter the port number of the

proxy server.

Glossary: Proxy servers are intermediate servers between media servers and their users. Some service providers use them to provide additional security or speed up access to browser pages that contain sound or video clips.

Media applications

Receive RealPlayer settings

You may receive RealPlayer settings in a special text message from the network operator or service provider. See "Data and settings," p. 52. For more information, contact your network operator or service provider.

Change the RealPlayer settings

Select Options > Settings and from the following:

Video—to adjust the contrast of the video, or to have RealPlayer automatically repeat video clips after they

finish playing.

Connection—to select whether to use a proxy server,

change the default access point, and set the port range used when connecting. Contact your service provider for the correct settings.

Network settings 1 Default access point—Scroll to the access point you

want to use to connect to the Internet, and press .

2 Online time—Set the time for RealPlayer to disconnect

from the network when you pause a media clip playing through a network link. Select User defined, and press

. Enter the time, and select OK.

Lowest UDP port—Enter the lowest port number of the

server’s port range. The minimum value is 1024.

Highest UDP port—Enter the highest port number of the

server’s port range. The maximum value is 65535. Select Options > Advanced settings to edit the bandwidth

values for different networks.

Movie director

To create muvees, press , and select Gallery, images and videos, and Options > Edit > Create muvee.

muvees are short, edited video clips that can contain video, images, music, and text. Quick muvee is created automatically by Movie director after you select the style for the muvee. Movie director uses the default music and

Media applications

text associated with the chosen style. In a custom muvee you can select your own video and music clips, images and style, and add an opening and closing message. You can send muvees with MMS.

The muvees can be saved in the Images & video folder in Gallery in .3gp file format.

Create a quick muvee

1 In Gallery, select images and videos for the muvee,

and Options > Edit > Create muvee. The style selection view opens.

2 Select a style for the muvee from the style list. 3 Select Options > Create muvee.

Create a custom muvee

1 In Gallery, select images and videos for the muvee,

and Options > Edit > Create muvee. The style selection view opens.

2 Scroll to the desired style, and select Options >

Customize.

3 Select the clips you want to include in your muvee

in Videos & images or Music. In Videos & images, you can define the order in which

the files are played in the muvee. To select the file you want to move, press . Then scroll to the file below which you want to place the marked file, and press . To add or remove images and videos from the muvee, select Options > Add/Remove.

To cut the video clips, In Videos & images, select

Options > Select contents. See "Select content," p. 43.

In Message you can add an opening and closing text to a muvee.

In Length, you can define the length of the muvee. Select from the following:

User defined—to define the length of the muvee Multimedia message—to optimize the length of the

muvee for MMS sending

Same as music—to set the muvee duration to be the

same as the chosen music clip

Auto-select—to include all the selected images and

video clips in the muvee

4 Select Options > Create muvee. The preview view opens.

5 To preview the custom muvee before saving it, select

Options > Play.

6 To save the muvee, select Options > Save.

To create a new custom muvee by using the same style settings, select Options > Recreate.

Select content

To edit the selected video clips, in the Videos & images folder, select Options > Select contents. You can select which parts of the video clip you want to include or exclude in the muvee. In the slide, green is for included, red is for excluded, and grey is for neutral parts.

To include a part of the video clip in the muvee, scroll to the part, and select Options > Include. To exclude a part, select Options > Exclude. To exclude a shot, select Options >

Exclude shot.

To let Movie director randomly include or exclude a part of the video clip, scroll to the part, and select Options >

Mark as neutral.

To let Movie director randomly include or exclude parts of video clip, select Options > Mark all as neutral.

Settings

In the style selection view, select Options > Customize >

Settings to edit the following options: Memory in use—Select where to store your muvees. Resolution—Select the resolution of your muvees. Select

Automatic to use the optimal resolution based on the

number and length of the video clips you have selected.

Default muvee name—Set a default name for the muvees.

Media applications

Time management

Clock

Press , and select Applications > Clock. To set a new alarm, select Options > Set alarm. When an alarm is active,

Time management

is shown.

To turn off the alarm, select Stop, or to stop the alarm for 5 minutes, select Snooze.

If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.

To cancel an alarm, select Applications > Clock > Options >

Remove alarm.

Clock settings

To change the clock settings, select Applications > Clock >

Options > Settings.

To change the time or date, select Time or Date.

To change the clock shown in the standby mode, select

Clock type > Analog or Digital.

To allow the mobile phone network to update the time, date, and time zone information to your device (network service), select Network operator time > Auto-update.

To change the alarm tone, select Clock alarm tone.

World clock

To open the world clock view, open Clock, and press

. In the world clock view, you can view the time

in different cities. To add cities to the list, select Options > Add city.

You can add a maximum of 15 cities to the list. To set your current city, scroll to a city, and select Options >

My current city. The city is displayed in the clock main

view, and the time in your device is changed according to the city selected. Check that the time is correct and matches your time zone.

Calendar

Use Calendar to remind you of meetings and anniversaries, and to keep track of your tasks and other notes.

Create calendar entries

Shortcut: In the day, week, or month calendar

view, press any key ( — ). An appointment entry opens, and the characters you enter are added to the Subject field. In the to-do view, a to-do note entry opens.

1 Press , and select

Calendar > Options > New entry and one of the following:

Meeting—to remind

you of an appointment that has a specific date and time

Meeting request—to

create and send a new meeting request. You need to have a mailbox set up for sending requests. See "Mailbox," p. 53.

Memo—to write a general entry for a day Anniversary—to remind you of birthdays or special

dates (entries are repeated every year)

To-do—to remind you of a task that needs doing

by a specific date

2 Fill in the fields. To set an alarm, select Alarm > On,

and enter the Alarm time and Alarm date. To add a description for an appointment, select

Options > Add description.

3 To save the entry, select Done.

When the calendar alarms for a note, select Silence to turn off the calendar alarm tone. The reminder text stays on the screen. To end the calendar alarm, select Stop. To set the alarm to snooze, select Snooze.

Tip! You can synchronize your calendar with a compatible PC using Nokia PC Suite. When creating a calendar entry, set the desired

Synchronization option.

Time management

Calendar views

Tip! Select Options > Settings to change the

starting day of the week or the view that is shown when you open the calendar.

In the month view, dates that have calendar entries are marked with a small triangle in the right bottom corner. In the week view, memos and anniversaries are placed before 8 a.m. To switch between the month view, week

Time management

view, day view, and to-do view, press . To go to a certain date, select Options > Go to date.

To jump to today, press . To send a calendar note to a compatible device, select

Options > Send.

To print calendar entries on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart

8150), select Options > Print.

Manage your calendar entries

Deleting past entries in Calendar saves space in your device memory.

To delete more than one event at a time, go to the month view, and select Options > Delete entry > Before date or All entries.

To mark a task as completed, scroll to it in the to-do view, and select Options > Mark as done.

Calendar settings

To modify the Calendar alarm tone, Default view, Week

starts on, and Week view title, select Options > Settings.

Messaging

Press , and select Messag. (network service). In Messag., you can create, send, receive, view, edit, and organize text messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive Web service messages, cell broadcast messages, and send service commands. Messages and data received using Bluetooth connectivity or infrared are received in the

Inbox folder in Messag..

To create a new message, select New message. Only devices that have compatible features can receive

and display multimedia messages. The appearance of a message may vary depending on the receiving device.

Messag. contains the following folders:

Inbox—Received messages, except e-mail and

cell broadcast messages, are stored here. E-mail messages are stored in the Mailbox.

My folders—Organize your messages into folders.

Tip! To avoid rewriting messages that you send

often, use texts in the templates folder.

Mailbox—Connect to your remote mailbox to

retrieve your new e-mail messages or view your previously retrieved e-mail messages offline. See "E-mail," p. 57.

Drafts—Draft messages that have not been sent

are stored here.

Sent—The last 20 messages that have been sent,

excluding messages sent using Bluetooth connectivity or infrared, are stored here. To change the number of messages to be saved, see "Other settings," p. 59.

Outbox—Messages waiting to be sent are

temporarily stored here. Example: Messages are placed in the outbox,

for example, when your device is outside network coverage. You can also schedule e-mail messages to be sent the next time you connect to your remote mailbox.

Reports—You can request the network to send you

a delivery report of the text messages and multimedia messages you have sent (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible.

Tip! When you have opened any of the default folders, to switch between the folders, press or .

Messaging

To enter and send service requests (also known as USSD commands), such as activation commands for network services, to your service provider, select Options > Service

command in the main view of Messag.. Cell broadcast (network service) allows you to receive

Messaging

messages on various topics, such as weather or traffic conditions, from your service provider. For available topics and relevant topic numbers, contact your service provider. In the main view of Messaging, select Options > Cell

broadcast. In the main view, you can see the status of

a topic, a topic number, name, and whether it has been flagged ( ) for follow-up.

Write text

ABC, abc, and Abc indicate the selected character mode. 123 indicates the number mode.

Traditional text input

is displayed when you write text using traditional

text input.

• Press a number key ( — ) repeatedly until the desired character appears. There are more characters available for a number key than are printed on the key.

• If the next letter is located on the same key as the present one, wait until the cursor appears (or press

to end the time-out period), and enter the letter.

• To insert a space, press . To move the cursor to the next line, press three times.

Predictive text input

You can enter any letter with a single keypress. Predictive text input is based on a built-in dictionary to which you can add new words. is displayed when you write text using predictive text input.

1 To activate predictive text input, press , and select

Predictive text on. This activates predictive text input

for all editors in the device.

2 To write the desired word,

press the keys — . Press each key only once for one letter. For example, to write "Nokia" when the English dictionary is selected, press for N,

for o, for k, for i,

and for a. The word suggestion

changes after each keypress.

3 When you finish writing the word correctly, press

to confirm it, or press to add a space. If the word is not correct, press repeatedly to view

the matching words the dictionary has found one by one, or press , and select Predictive text >

Matches.

If the ? character is shown after the word, the word is not in the dictionary. To add a word to the dictionary, select Spell, enter the word using traditional text input, and select OK. The word is added to the dictionary. When the dictionary is full, a new word replaces the oldest added word.

4 Start writing the next word.

Write compound words

Write the first half of a compound word; to confirm it, press . Write the last part of the compound word. To complete the compound word, press to add a space.

Turn predictive text input off

To turn predictive text input off for all editors in the device, press , and select Predictive text > Off.

Tip! To turn predictive text input on or off, quickly press twice.

Tips on text input

To insert a number in the letter mode, press and hold the desired number key.

To switch between the letter and number mode, press and hold .

To switch between the different character modes, press . To delete a character, press . To delete more than one

character, press and hold . The most common punctuation marks are available

under . To open a list of special characters, press and hold .

Tip! To insert several special characters at the same time, press when you select each character.

Write and send messages

Before you can create a multimedia message or write an e-mail, you must have the correct connection settings in place. See "Receive MMS and e-mail settings," p. 51 and "E-mail," p. 57.

The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS.

Messaging

1 Select New message and from the following:

Text msg.—to send a text message Multimedia message—to send a multimedia message

(MMS)

Messaging

E-mail—to send an e-mail

If you have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start.

2 In the To field, press to

select recipients or groups from contacts, or enter the recipient’s phone number or e-mail address. To add a semicolon (;) that separates the recipients, press . You can also copy and paste the number or address from the clipboard.

3 In the Subject field, enter

the subject of a multimedia message or e-mail. To change the fields that are visible, select

Options > Address fields.

4 In the message field, write the message. To insert

atemplate, select Options > Insert or Insert

object > Template.

5 To add a media object to a multimedia message, select

Options > Insert object > Image, Sound clip, or Video clip. When sound is added, is shown.

You cannot send video clips that are saved in the .mp4 format in a multimedia message. To change the format in which recorded videos are saved, see "Video settings," p. 25.

6 To take a new picture or record sound or video for

a multimedia message, select Insert new > Image,

Sound clip, or Video clip. To insert a new slide

to the message, select Slide. To see what the multimedia message looks like,

select Options > Preview.

7 To add an attachment to an e-mail, select Options >

Insert > Image, Sound clip, Video clip, or Note.

E-mail attachments are indicated by .

Tip! To send other file types as attachments, open the appropriate application, and select

Send > Via e-mail, if available.

8 To send the message, select Options > Send,

or press .

Note: Your device may indicate that your message was sent to the message center nu mber programmed into your device. Your device may not indicate whether the message is received at the intended destination. For more details about messaging services, contact your service provider.

Your device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message. In the navigation bar, you can see the message length indicator counting backwards. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two messages.

E-mail messages are automatically placed in Outbox before sending. If sending does not succeed, the e-mail is left in the Outbox first with the Queued status, and then if the sending has failed several times, with the Failed status.

Tip! You can combine images, video, sound, and text to a presentation and send it in a multimedia message. Start to create a multimedia message, and select Options > Create presentation. The option is shown only if MMS creation mode is set to Guided or Free. See "Multimedia messages," p. 56.

Receive MMS and e-mail settings

You may receive the settings in a message from your network operator or service provider. See "Data and settings," p. 52.

Enter the MMS settings manually 1 Press , and select Tools > Settings > Connection >

Access points, and define the settings for a multimedia

messaging access point. See "Connection," p. 90.

2 Press , and select Messaging > Options >

Settings > Multim. msg. > Access point in use and

the access point you created as the preferred connection. See also "Multimedia messages," p. 56.

Before you can send, receive, retrieve, reply to, and forward e-mail, you must do the following:

• Configure an Internet access point (IAP) correctly. See "Connection," p. 90.

• Define your e-mail settings correctly. If you select

Mailbox in the Messag. main view and have not set

up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also "E-mail," p. 57.

You must have a separate e-mail account. Follow the instructions given by your remote mailbox and Internet service provider (ISP).

Messaging

Inbox—receive messages

In the Inbox folder, indicates an unread text message,

Messaging

an unread multimedia message, data received through infrared, and data received through Bluetooth connectivity.

When you receive a message, and 1 new message are shown in the standby mode. To open the message, select Show. To open a message in Inbox, scroll to it, and press .

To reply to a received message, select Options > Reply To print a text or a multimedia message on a compatible

Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.

Multimedia messages

Important: Exercise caution when opening

messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC.

You may receive a notification that a multimedia message is waiting in the multimedia message center. To start a packet data connection to retrieve the message to your device, select Options > Retrieve.

When you open a multimedia message ( ), you may see an image and a message. is shown if sound is included, or if video is included. To play the sound or the video, select the indicator.

To see the media objects that have been included in the multimedia message, select Options > Objects.

If the message includes a multimedia presentation, is displayed. To play the presentation, select the indicator.

Data and settings

Your device can receive many kinds of messages that contain data ( ):

Configuration message—You may receive settings from

your network operator, service provider, or company information management department in a configuration message. To save the settings, select Options > Save all.

Business card—To save the information to Contacts, select Options > Save business card. Certificates or sound files

attached to the business card are not saved.

Ringing tone—To save the ringing tone, select Options > Save.

Operat. logo—To have the logo shown in the standby

mode instead of the network operator’s own identification, select Options > Save.

Calen. entry—To save the invitation, select Options > Save to Calendar.

Web message—To save the bookmark to the bookmarks list

in the Web browser, select Options > Add to bookmarks. If the message contains both access point settings and bookmarks, to save the data, select Options > Save all.

E-mail notif.—The note tells you how many new e-mails

you have in your remote mailbox. An extended notification may list more detailed information.

Web service messages

Web service messages ( ) are notifications (for example, news headlines) and may contain a text message or a link. For availability and subscription, contact your service provider.

Mailbox

If you select Mailbox and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also "E-mail," p. 57.

When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes.

Open the mailbox

When you open the mailbox, the device asks if you want to connect to the mailbox (Connect to mailbox?).

To connect to your mailbox and retrieve new e-mail headings or messages, select Yes. When you view messages online, you are continuously connected to a remote mailbox using a data connection. See also "Connection," p. 90.

To view previously retrieved e-mail messages offline, select

No. When you view e-mail messages offline, your device is

not connected to the remote mailbox.

Retrieve e-mail messages

If you are offline, select Options > Connect to start a connection to the remote mailbox.

Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC.

1 When you have an open connection to a remote

mailbox, select Options > Retrieve e-mail and one of the following:

New—to retrieve all new e-mail messages Selected—to retrieve only the e-mail messages that

have been marked

All—to retrieve all messages from the mailbox

To stop retrieving messages, select Cancel.

Messaging

2 After you retrieve the e-mail messages, you can

continue viewing them online, or select Options >

Disconnect to close the connection and view the

e-mail messages offline.

Messaging

E-mail status indicators:

The new e-mail (offline or online mode) has not been retrieved to your device.

The new e-mail has been retrieved to your device.

The e-mail message has been read, and it has not been retrieved to your device.

The e-mail message has been read.

The e-mail heading has been read and the message content has been deleted from the device.

3 To open an e-mail message, press . If the e-mail

message has not been retrieved and you are offline,

you are asked if you want to retrieve this message

from the mailbox. To view e-mail attachments, open a message that has the

attachment indicator , and select Options > Attachments. If the attachment has a dimmed indicator, it has not been retrieved to the device; select Options > Retrieve.

To print an e-mail message on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart

8150), select Options > Print.

Retrieve e-mail messages automatically

To retrieve messages automatically, select Options >

E-mail settings > Automatic retrieval > Header retrieval > Always enabled or Only in home net., and

define when and how often the messages are retrieved. Retrieving e-mail messages automatically may increase

your call costs due to the data traffic.

Delete e-mail messages

To delete the contents of an e-mail message from the device while still retaining it in the remote mailbox, select

Options > Delete. In Delete msg. from:, select Phone only.

The device mirrors the e-mail headings in the remote mailbox. Although you delete the message content, the e-mail heading stays in your device. If you want to remove the heading as well, you must first delete the e-mail message from your remote mailbox, and then make a connection from your device to the remote mailbox again to update the status.

To delete an e-mail from the device and the remote mailbox, select Options > Delete. In Delete msg. from:, select

Phone and server.

If you are offline, the e-mail is deleted first from your device. During the next connection to the remote mailbox, it is automatically deleted from the remote mailbox. If you are using the POP3 protocol, messages marked to be deleted are removed only after you have closed the connection to the remote mailbox.

To cancel deleting an e-mail from the device and server, scroll to an e-mail that has been marked to be deleted during the next connection ( ), and select Options >

Restore.

Messaging settings

Fill in all fields marked with Must be defined or with a red asterisk. Follow the instructions given by your service provider. You may also obtain settings from your service provider in a configuration message.

Some or all message centers or access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.

Messaging

Disconnect from the mailbox

When you are online, to end the data connection to the remote mailbox, select Options > Disconnect.

View messages on a SIM card

Before you can view SIM messages, you must copy them to a folder in your device.

1 In the Messag. main view, select Options > SIM

messages.

2 Select Options > Mark/Unmark > Mark or Mark all

to mark messages.

3 Select Options > Copy. A list of folders opens. 4 To start copying, select a folder and OK. To view the

messages, open the folder.

Text messages

Press , and select Messag. > Options > Settings >

Text msg. and from the following: Message centers—View a list of all text message centers

that have been defined.

Character encoding— To use character conversion

to another encoding system when available, select

Reduced support. Msg. center in use—Select which message center is used

to deliver text messages.

Receive report—Select whether the network sends

delivery reports on your messages (network service).

Message validity—Select how long the message center

resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.

Messaging

Message sent as—Change this option only if you are sure

that your message center is able to convert text messages into these other formats. Contact your network operator.

Preferred conn.—Select the connection used for sending

text messages: GSM network or packet data, if supported by the network. See "Connection," p. 90.

Reply via same ctr.—Select whether you want the reply

message to be sent using the same text message center number (network service).

Multimedia messages

Press , and select Messag. > Options > Settings >

Multimedia message and from the following: Image size—Define the size of the image in a multimedia

message: Original (shown only when the MMS creation

mode is set to Guided or Free), Small, or Large. MMS creation mode —If you select Guided, the device

informs you if you try to send a message that may not be supported by the recipient. Select Restricted; the device prevents you from sending messages that may not be supported.

Access point in use—Select which access point is used as the

preferred connection for the multimedia message center.

Multimedia retrieval—Select how you want to receive

multimedia messages. To receive multimedia messages automatically in your home network (the operator whose SIM card is in your device), select Auto. in home network. Outside your home network, you receive a notification that there is multimedia message that you can retrieve in the multimedia message center.

When you are outside your home network, sending and receiving multimedia messages may cost you more.

If you select Multimedia retrieval > Always automatic, your device automatically makes an active packet data connection to retrieve the message both in and outside your home network.

Allow anon. msgs.—Select whether you want to decline

messages from an anonymous sender.

Receive ads—Define whether you want to receive

multimedia message advertisements.

Receive report—Select whether you want the status of the

sent message to be shown in the log (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible.

Deny report sending—Select whether you want to deny

your device sending delivery reports of received multimedia messages.

Message validity—Select how long the message center

resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.

E-mail

Press , and select Messag. > Options > Settings >

E-mail and from the following: Mailboxes—Select a mailbox to change the following

settings: Connection settings, User settings, Retrieval

settings, and Automatic retrieval. Mailbox in use— Select which mailbox you want to use for

sending e-mail. To create a new mailbox, select Options > New mailbox

in the mailbox main view.

Connection settings

To edit the settings for the e-mail you receive, select

Incoming e-mail and from the following: User name—Enter your user name, given to you by your

service provider.

Password—Enter your password. If you leave this field blank,

you are prompted for the password when you try to connect to your remote mailbox.

Incoming mail serv.—Enter the IP address or host name

of the mail server that receives your e-mail.

Access point in use—Select an Internet access point (IAP).

See "Connection," p. 90.

Mailbox name—Enter a name for the mailbox. Mailbox type—Defines the e-mail protocol that your

remote mailbox service provider recommends. The options are POP3 and IMAP4. This setting can be selected only once and cannot be changed if you have saved or exited from the mailbox settings. If you use the POP3 protocol, e-mail messages are not updated automatically when you are online. To see the latest e-mail messages, you must disconnect and make a new connection to your mailbox.

Security (ports)—Select the security option used to secure

the connection to the remote mailbox.

Port—Define a port for the connection. APOP secure login (for POP3 only)—Use with the POP3

protocol to encrypt the sending of passwords to the remote e-mail server while connecting to the mailbox.

To edit the settings for the e-mail you send, select

Outgoing e-mail and from the following: My e-mail address—Enter the e-mail address given to you

by your service provider. Replies to your messages are sent to this address.

Messaging

Outgoing mail serv.—Enter the IP address or host name of

the mail server that sends your e-mail. You may only be able to use the outgoing server of your network operator. Contact your service provider for more information.

Access point in use—Select an Internet access point (IAP).

Messaging

See "Connection," p. 90. The settings for User name, Password, Security (ports),

and Port are similar to the ones in Incoming e-mail.

User settings

My name—Enter your own name. Your name replaces your

e-mail address in the recipient’s device when the recipient’s device supports this function.

Send message—Define how e-mail is sent from your device.

Select Immediately for the device to connect to the mailbox when you select Send message. If you select During next

conn., e-mail is sent when the connection to the remote

mailbox is available.

Send copy to self—Select whether you want to save a copy

of the e-mail to your remote mailbox and to the address defined in My e-mail address.

Include signature—Select whether you want to attach

a signature to your e-mail messages.

New e-mail alerts—Select whether you want to receive

the new e-mail indications, a tone and a note, when new mail is received to the mailbox.

Retrieval settings

E-mail to retrieve—Define which parts of the e-mail are

retrieved: Headers only, Partially (kB), Messages (for IMAP4 only), or Msgs. & attachs..

Retrieval amount—Define how many new e-mail messages

are retrieved to the mailbox.

IMAP4 folder path (for IMAP4 only)—Define the folder

path for folders to be subscribed.

Folder subscriptions (for IMAP4 only)—Subscribe to other

folders in the remote mailbox and retrieve content from those folders.

Automatic retrieval

Header retrieval—Select whether you want the device

to retrieve new e-mail automatically. You can define when, and how often, the messages are retrieved.

Retrieving e-mail messages automatically may increase your call costs due to the data traffic.

Web service messages

Press , and select Messaging > Options > Settings >

Service message. Select whether you want to receive

service messages. If you want to set the device to automatically activate the browser and start a network connection to retrieve content when you receive a service message, select Download messages > Automatically.

Cell broadcast

Check the available topics and related topic numbers with your service provider. Press , and select Messaging >

Options > Settings > Cell broadcast and from the

following:

Reception—Select whether you want to receive cell

broadcast messages.

Language—Select the languages in which you want to

receive messages: All, Selected, or Other.

Topic detection—Select whether the device automatically

searches for new topic numbers, and saves the new numbers without a name to the topic list.

Other settings

Press , and select Messaging > Options > Settings >

Other and from the following: Save sent messages—Select whether you want to save a

copy of the text messages, multimedia messages, or e-mail that you send to the Sent folder.

No. of saved msgs.—Define how many sent messages are

saved to the Sent folder at a time. The default limit is 20 messages. When the limit is reached, the oldest message is deleted.

Memory in use—If a compatible memory card is inserted

in the device, select the memory where you want to save your messages: Phone memory or Memory card.

Messaging

Contacts (Phonebook)

Press , and select Contacts. In Contacts you can save and update contact information, such as phone numbers, home addresses, or e-mail addresses, of your contacts. You can add a personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to contacts. See "Data and settings," p. 52. Contact information can only be sent to or received from compatible devices.

To view the amount of contacts, groups, and the available memory in Contacts, select Options > Contacts info.

Save and edit names and numbers

1 Select Options > New contact. 2 Fill in the fields that you want, and select Done.

To edit contact cards in Contacts, scroll to the contact card you want to edit, and select Options > Edit. You can also search for the desired contact by entering the first letters of the name to the search field. A list of the contacts starting with the letters appear on the display.

Tip! To add and edit contact cards, you can also use Nokia Contacts Editor available in Nokia PC Suite.

To attach a small thumbnail image to a contact card, open the contact card, and select Options > Edit > Options >

Add thumbnail. The thumbnail image is shown when the

contact calls. To listen to the voice tag assigned to the contact, scroll

to a contact card, and press the scroll key. Then select

Options > Play voice tag. See "Voice dialing," p. 64.

To send contact information, select the card you want to send. Select Options > Send > Via text message, Via

multimedia, Via Bluetooth, or Via infrared. See

"Messaging," p. 47 and "Send data using Bluetooth connectivity," p. 75.

Tip! To print contact cards on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.

To add a contact to a group, select Options > Add to group: (shown only if you have created a group). See "Create contact groups," p. 62.

Tip! To check to which groups a contact belongs, scroll to the contact, and select Options > Belongs

to groups.

To delete a contact card in Contacts, select a card, and press . To delete several contact cards at the same time, press and to mark the contacts, and press to delete.

Default numbers and addresses

You can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The default number is also used in voice dialing.

1 In the address book, select a contact, and press . 2 Select Options > Defaults. 3 Select a default to which you want to add a number

or an address, and select Assign.

4 Select a number or an address you want to set as

adefault.

The default number or address is underlined in the contact card.

Copy contacts

To copy names and numbers from a SIM card to your device, press , and select Contacts > Options >

SIM contacts > SIM directory. Select the names you

want to copy and Options > Copy to Contacts. To copy contacts to your SIM card, press , and select

Contacts. Select the names you want to copy and Options > Copy to SIM direct., or Options > Copy > To SIM directory. Only the contact card fields supported

by your SIM card are copied.

Tip! You can synchronize your contacts to a compatible PC with Nokia PC Suite.

SIM directory and other SIM services

For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.

Press , and select Contacts > Options > SIM contacts >

SIM directory to see the names and numbers stored on the

SIM card. In the SIM directory you can add, edit, or copy numbers to contacts, and you can make calls.

To view the list of fixed dialing numbers, select Options >

SIM contacts > Fixed dialing contacts. This setting is

only shown if supported by your SIM card.

Contacts (Phonebook)

To restrict calls from your device to selected phone numbers, select Options > Activ. fixed dialing. You need your PIN2 code to activate and deactivate fixed dialing or edit your fixed dialing contacts. Contact your service provider if you do not have the code. To add new numbers to the fixed dialing list, select Options > New SIM contact. You need the PIN2 code for these functions.

When you use Fixed dialing, packet data connections are not possible, except when sending text messages over a packet data connection. In this case, the message center

Contacts (Phonebook)

number and the recipient’s phone number must be included on the fixed dialing list.

When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.

Add ringing tones for contacts

When a contact or group member calls you, the device plays the chosen ringing tone (if the caller’s telephone number is sent with the call and your device recognizes it).

1 Press to open a contact card or go to the groups list,

and select a contact group. 2 Select Options > Ringing tone. A list of ringing

tones opens. 3 Select the ringing tone you want to use for the

individual contact or the selected group.

You can also use a video clip as a ringing tone. To remove the ringing tone, select Default tone from

the list of ringing tones.

Create contact groups

1 In Contacts, press to open the groups list. 2 Select Options > New group. 3 Write a name for the group or use the default name

Group N, and select OK.

4 Open the group, and select Options > Add members. 5 Scroll to a contact, and press to mark it. To add

multiple members at a time, repeat this action on all

the contacts you want to add. 6 Select OK to add the contacts to the group.

To rename a group, select Options > Rename, enter the new name, and select OK.

Remove members from a group

1 In the groups list, open the group you want to modify. 2 Scroll to the contact, and select Options > Remove

from group.

3 Select Yes to remove the contact from the group.

Make calls

Calls

Tip! To increase or decrease the volume during a

call, use the volume key on the side of your device. If you have set the volume to Mute, select Unmute first, and then press the volume key up or down.

1 In the standby mode, enter the phone number,

including the area code. To remove a number, press . For international calls, press twice for the + character

(replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.

2 Press to call the number. 3 Press to end the call (or to cancel the call attempt).

Pressing always ends a call, even if another application is active.

To make a call from Contacts, press , and select

Contacts. Scroll to the desired name, or enter the first

letters of the name to the search field. Matching contacts are listed. To call, press . Select the call type Voice call.

You must copy the contacts from your SIM card to

Contacts before you can make a call this way. See "Copy

contacts," p. 61.

To call your voice mailbox (network service), press and hold

in the standby mode. See also "Call forwarding," p. 95.

Tip! To change the phone number of your voice mailbox, press , and select Tools > Voice mail >

Options > Change number. Enter the number

(obtained from your service provider), and select OK.

To call a recently dialed number in the standby mode, press . Scroll to the number, and press .

Make a conference call

1 Make a call to the first participant. 2 To make a call to another participant, select Options >

New call. The first call is automatically put on hold.

3 When the new call is answered, to join the first

participant in the conference call, select Options >

Conference.

To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference. Your device supports conference calls between a maximum of six participants, including yourself.

To have a private conversation with one of the participants, select Options > Conference > Private.

Make calls

Select a participant, and select Private. The conference call is put on hold on your device. The other participants can still continue the conference call. After you finish the private conversation, select Options > Add to

Make calls

conference to return to the conference call.

To drop a participant, select Options > Conference >

Drop participant, scroll to the participant, and

select Drop.

4 To end the active conference call, press .

1-touch dial a phone number

To activate1-touch dialing, press , and select Tools >

Settings > Call > 1-touch dialing> On.

To assign a phone number to one of the 1-touch dialing keys ( — ), press , and select Tools > Spd. dial. Scroll to the key to which you want to assign the phone number, and select Options > Assign. is reserved for the voice mailbox.

To call in the standby mode, press the 1-touch dial key and .

Voice dialing

Your device supports enhanced voice commands. Enhanced voice commands are not dependent on the speaker’s voice, so the user does not record voice tags in advance. Instead, the device creates a voice tag for the entries in contacts, and compares the spoken voice tag to it. The voice recognition in the device adapts to the main user’s voice to recognize the voice commands better.

The voice tag for a contact is the name or nickname that is saved on the contact card. To listen to the synthesized voice tag, open a contact card, and select Options >

Play voice tag.

Make a call with a voice tag

Note: Using voice tags may be difficult in a noisy

environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.

When you use voice dialing, the loudspeaker is in use. Hold the device at a short distance away when you say the voice tag.

1 To start voice dialing, in the standby mode, press and

hold the right selection key. If you are using a compatible

headset with the headset key, press and hold the headset

key to start voice dialing.

2 A short tone is played, and Speak now is displayed.

Say clearly the name or nickname that is saved on the contact card.

3 The device plays a synthesized voice tag for the recognized

contact in the selected device language, and displays the name and number. After a timeout of 2.5 seconds, the device dials the number.

If the recognized contact was not correct, select Next to view a list of other matches, or Quit to cancel voice dialing.

If several numbers are saved under the name, the device selects the default number, if it has been set. Otherwise the device selects the first available number of the following: Mobile, Mobile (home), Mobile (work),

Telephone, Tel. (home), and Tel. (work).

Answer or decline a call

To answer the call, press . To mute the ringing tone when a call comes in, select

Silence.

Tip! To change the device tones for different

environments and events, for example, when you want your device to be silent, see "Profiles—set tones," p. 84.

If you do not want to answer a call, press . If you have activated the Call forward > If busy function to forward calls, declining an incoming call also forwards the call. See "Call forwarding," p. 95.

When you decline an incoming call, you can send a text message to the caller informing why you cannot answer the call. Select Options > Send text message. You can edit the text before sending it. To set up this option and write a standard text message, see "Call settings," p. 89.

Call waiting (network service)

You can answer a call while you have another call in progress if you have activated Call waiting in Tools >

Settings > Call > Call waiting.

To answer the waiting call, press . The first call is put on hold.

To switch between the two calls, select Swap. To connect an incoming call or a call on hold with an active call and to disconnect yourself from the calls, select Options >

Transfer. To end the active call, press . To end both

calls, select Options > End all calls.

Make calls

Options during a call

Many of the options that you can use during a voice call are network services. Select Options during a call for some of the following options: Mute or Unmute, Answer,

Make calls

Decline, Swap, Hold or Unhold, Activate handset, Activate loudsp., or Activate handsfree (if a compatible headset

with Bluetooth connectivity is attached), End active call or End all calls, New call, Conference, Transfer, and Open

active standby. Select from the following: Replace—to end an active call and replace it by answering

the waiting call.

Send touch tones—to send touch tone strings, for example,

a password. Enter the touch tone string or search for it in

Contacts. To enter a wait character (w) or a pause character

(p), press repeatedly. Select OK to send the tone.

Tip! You can add touch tones to the Phone

number or Touch tones fields in a contact card.

Log

To monitor the phone numbers of missed, received, and dialed voice calls, press , and select Applications > Log >

Recent calls. The device registers missed and received calls

only if the network supports these functions, the device is switched on, and within the network service area.

To clear all recent call lists, select Options > Clear recent

calls in the recent calls main view. To clear one of the call

registers, open the register you want to erase, and select

Options > Clear list. To clear an individual event, open

a register, scroll to the event, and press .

Call timers

To monitor the approximate duration of your incoming and outgoing calls, press , and select Applications >

Log> Call timers.

To set the display of the call timers while a call is active, select Tools > Log > Options > Settings > Show call

duration > Yes or No.

Note: The actual time invoiced for calls by your

service provider may vary, depending on network features, rounding off for billing, and so forth.

To clear call duration timers, select Options > Clear

timers. For this you need the lock code. See "Phone and

SIM," p. 92.

Packet data

To check the amount of data sent and received during packet data connections, press , and select Tools >

Log > Packet data. For example, you may be charged

for your packet data connections by the amount of data sent and received.

Monitor all communication events

Icons in Log:

Incoming Outgoing Missed communication events

To monitor all voice calls, text messages, or data connections registered by the device, press , select Tools > Log, and scroll right to open the general log. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event, and create new contact cards based on the log information.

Tip! To view a list of sent messages, press , and select Messaging > Sent.

Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging center, or Web pages are shown as packet data connections.

To add an unknown phone number from Log to your contacts, select Options > Add to contacts.

To filter the log, select Options > Filter and a filter. To erase the contents of the log, recent calls register, and

messaging delivery reports permanently, select Options >

Clear log. Select Yes to confirm. To remove a single event

from the log, press . To set the Log duration, select Options > Settings > Log

duration. The log events remain in the device memory for

a set number of days after which they are automatically erased to free memory. If you select No log, all the log contents, recent calls register, and messaging delivery reports are permanently deleted.

To view the details of a communication event, in the general log view scroll to an event, and press .

Tip! In the details view you can copy a phone number to the clipboard, and paste it to a text message, for example. Select Options >

Copy Number.

Packet data counter and connection timer: To view how

much data, measured in kilobytes, is transferred and how long a certain packet data connection lasts, scroll to an incoming or outgoing event indicated by Pack., and select

Options > View details.

Make calls

Web browsers

Press , and select Services (network service).

Web browsers

Various service providers maintain pages specifically designed for mobile devices that you can view with the

Services browser. These pages use the wireless markup

language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML).

Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services.

Access point

To access pages, you need service settings for the page that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the page. See "Data and settings," p. 52. For more information, contact your network operator or service provider.

Services

Shortcut: To start a connection, press and hold

in the standby mode.

Tip! Settings may be available on the Web site of a network operator or service provider.

Enter settings manually 1 Press , select Tools > Settings > Connection >

Access points, and define the settings for an access

point. Follow the instructions given to you by your

service provider. See "Connection," p. 90.

2 Press , and select Services > Options > Bookmark

manager > Add bookmark. Write a name for the

bookmark and the address of the page defined for

the current access point. 3 To set the created access point as the default access

point, select Options > Settings > Access point.

Bookmarks view

The bookmarks view opens when you open Services. Your device may have some bookmarks loaded for sites not

affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.

indicates the starting page defined for the default

access point.

Connection security

If the security indicator is displayed during a connection, the data transmission between the device and the Internet gateway or server is encrypted.

The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.

Select Options > Details > Security to view details about the connection, encryption status, and information about server and user authentication.

Security certificates may be required for some services, such as banking services. For more information, contact your service provider. See also "Certificate management," p. 93.

Browse

Important: Use only services that you trust and

that offer adequate security and protection against harmful software.

To download a page, select a bookmark, or enter the address in the field ( ).

On a browser page, new links appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them.

To open links and make selections, press .

Shortcut: Use to jump to the end of a page and to the beginning of a page.

To go to the previous page while browsing, select Back. If Back is not available, select Options > Navigation

options > History to view a chronological list of the pages

you visited during a browsing session. To retrieve the latest content from the server, select Options >

Navigation options > Reload.

To save a bookmark, select Options > Save as bookmark.

Tip! To access the bookmarks view while browsing, press and hold . To return to the browser view, select Options > Back to page.

To save a page while browsing, select Options > Advanced

options > Save page. You can save pages to the device

memory or compatible memory card (if inserted), and browse them when offline. To access the pages later, press

in the bookmarks view to open the Saved pages view.

To enter a new URL address, select Options > Navigation

options > Go to web address.

To open a sublist of commands or actions for the currently open page, select Options > Service options.

You can download files that cannot be shown on the browser page, such as ringing tones, images, operator logos, themes, and video clips. To download an item, scroll to the link, and press .

Web browsers

When you start a download, a list of ongoing, paused, and completed downloads from the current browsing session is displayed. You can also view the list by selecting Options >

Downloads. In the list, scroll to an item, and select Options

to pause, resume, or cancel ongoing downloads, or open, save, or delete completed downloads.

Web browsers

Download and purchase items

You can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free, or you can purchase them. Downloaded items are handled by the respective applications in your device, for example, a downloaded photo can be saved in Gallery.

Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.

1 To download the item, scroll to the link, and press . 2 Select the appropriate option to purchase the item,

for example, “Buy”.

3 Carefully read all the information provided.

To continue the download, select Accept. To cancel the download, select Cancel.

End a connection

To end the connection and view the browser page offline, select Options > Advanced options > Disconnect, or to end the connection and close the browser, select Options > Exit.

Empty the cache

The information or services you have accessed are stored in the cache memory of the device.

A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache. To empty the cache, select Options > Advanced options > Clear cache.

Settings

Select Options > Settings and from the following:

Access point—Change the default access point.

See "Connection," p. 90. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.

Homepage—Define the home page. Load imgs. & sounds—Select whether you want to load

images while browsing. If you select No, to load images later during browsing, select Options > Show images.

Font size—Select the text size. Auto. bookmarks—Enable or disable automatic bookmark

collecting. If you want to continue collecting automatic bookmarks but hide the folder from the bookmarks view, select Hide folder.

Screen size—Select what is shown when you are browsing: Select. keys only or Full screen.

Search page—Define a Web page that is downloaded

when you select Navigation options > Open search page in the bookmarks view, or when browsing.

Volume—If you want the browser to play sounds embedded

on Web pages, select a volume level.

Rendering—If you want the page layout shown as accurately

as possible when in Small screen mode, select By quality. If you do not want external cascading style sheets to be downloaded, select By speed.

Cookies—Enable or disable the receiving and sending

of cookies.

Confirm touch tones—Select whether you want to confirm

before the device sends touch tones during a voice call. See also "Options during a call," p. 66.

Java/ECMA script—Enable or disable the use of scripts. Security warnings—Hide or show security notifications. Default encoding—If text characters are not sho wn correctly,

you can select another encoding according to language.

Web

Press , and select Applications > Web (network service). With this browser, you are able to view normal Web pages

that use extensible hypertext markup language (XHTML) or hypertext markup language (HTML). You can zoom in and out on a page and read Web feeds and blogs.

Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services.

Web feeds and blogs

Important: Use only services that you trust and

that offer adequate security and protection against harmful software.

Web feeds are xml files in Web pages that are widely used by the weblog community to share the latest entries' headlines or their full text, for example, recent news. It is common to find Web feeds on Web, Blog and Wiki pages.

Web browsers

To subscribe to a Web feed on Web pages, select Options >

Subscribe. To view the Web feeds you have subscribed to,

in the Web bookmarks view, select Web feeds. Blogs or Weblogs are Web diaries. To download a Web feed

or blog on the Web, scroll to it, and press the scroll key.

Web browsers

Browse

Important: Use only services that you trust and

that offer adequate security and protection against harmful software.

To download a page, select a bookmark, and press the scroll key. You can also enter the address in the field ( ).

Keyboard shortcuts

• Press to close the current window if two or more windows are open.

• Press to open your bookmarks.

• Press to search for text in the current page.

• Press to return to the previous page.

• Press to list all open windows.

• Press to show the page overview. Press again to zoom in and view the desired information.

• Press to go to a different Web page.

• Press to go to the start page.

To zoom the page in or out, press or .

To allow or prevent the automatic opening of multiple windows, select Options > Settings > Block pop-ups > Yes.

To view the Web pages you have visited during the current browsing session, select Options > Navigation options >

History. To have the list of the previous pages automatically

shown when you return to the previous page, select

Options > Settings > History list > On.

Search information

You can use Mini Map to view and search for information on Web pages that contain large amount of information. When Mini Map is on, Web automatically zooms out and shows an overview of the Web page you browse. To move on the page, scroll right, left, up, or down. When you find the desired information, stop scrolling, and Mini Map takes you to the desired spot. To set Mini Map on, select

Options > Settings > Mini Map > On.

End connection

To end the connection to the Web, select Options >

Advanced options > Disconnect.

To delete the information the network server collects about your visits to various Web pages, select Options >

Advanced options > Delete cookies.

To empty the temporary memory that stores information about your visits to different Web sites, select Options >

Advanced options > Clear cache.

Connections

Bluetooth connectivity

You can connect wirelessly to other compatible devices with wireless Bluetooth technology. Compatible devices may include mobile phones, computers, and enhancements such as headsets and car kits. You can use Bluetooth connectivity to send images, video clips, music and sound clips, and notes; connect wirelessly to your compatible PC (for example, to transfer files); connect to a compatible printer to print images with Image print. See ‘Image print’, p. 31.

Since devices with Bluetooth wireless technology communicate using radio waves, your device and the other device do not need to be in direct line-of-sight. The two devices only need to be within 10 meters (33 feet) of each other, but the connection may be subject to interference from obstructions such as walls or from other electronic devices.

This device is compliant with Bluetooth Specification 2.0 supporting the following profiles: Basic Printing Profile, Dial-up Networking Profile, Headset Profile, Handsfree Profile, Object Push Profile, File Transfer Profile, Basic Imaging Profile, SIM Access profile, Synchronization Profile, and Human Interface Device Profile. To ensure interoperability between other devices supporting Bluetooth technology,

use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.

Glossary: A profile corresponds to a service or a function, and defines how different devices connect. For example, the Handsfree Profile is used between the handsfree device and the mobile device. For devices to be compatible, they must support the same profiles.

There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.

Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.

When the device is locked, you cannot use Bluetooth connectivity. See ‘Security’, p. 92 for more information on locking the device.

Connections

Settings

Press , and select Tools > Bluetooth. When you open the application for the first time, you are asked to define a name for your device. After you set Bluetooth connectivity on and change My phone's visibility to Shown to all, your

Connections

device and this name can be seen by other users with devices using Bluetooth wireless technology.

Select from the following:

Bluetooth—Select On or Off. To connect wirelessly to

another compatible device, first set Bluetooth connectivity

On, then establish a connection. My phone's visibility—To allow your device to be found by

other devices with Bluetooth wireless technology, select

Shown to all. To hide it from other devices, select Hidden. My phone's name—Edit the name of your device. Remote SIM mode—To enable another device, such as

a compatible car kit enhancement, to use the SIM card in your device to connect to the network, select On.

Remote SIM mode

To use the remote SIM mode with a compatible car kit enhancement, set Bluetooth connectivity on, and enable the use of the remote SIM mode with your device. Before the mode can be activated, the two devices must be paired and the pairing initiated from the other device.

When pairing, use a 16-digit passcode, and set the other device as authorized. See ‘Pair devices’, p. 75. Activate the remote SIM mode from the other device.

When remote SIM mode is on in your Nokia N73, Remote

SIM is displayed in the standby mode. The connection to

the wireless network is turned off, as indicated by in the signal strength indicator area, and you cannot use SIM card services or features requiring cellular network coverage.

When the wireless device is in the remote SIM mode, you can only use a compatible connected enhancement, such as a car kit, to make or receive calls. Your wireless device will not make any calls, except to the emergency numbers programmed into your device, while in this mode. To make calls from your device, you must first leave the remote SIM mode. If the device has been locked, enter the code to unlock it first.

To leave the remote SIM mode, press the power key, and select Exit rem. SIM mode.

Security tips

When you are not using Bluetooth connectivity, select

Bluetooth > Off or My phone's visibility > Hidden. In this

way, you can better control who can find your device with Bluetooth wireless technology, and connect to it.

Do not pair with an unknown device. In this way, you can better protect your device from harmful content.

Send data using Bluetooth connectivity

Several Bluetooth connections can be active at a time. For example, if you are connected to a compatible headset, you can also transfer files to another compatible device at the same time.

Bluetooth connectivity indicators

• When is shown in the standby mode, Bluetooth connectivity is on.

• When is blinking, your device is trying to connect with another device.

• When is shown continuously, data is being transmitted using Bluetooth connectivity.

Tip! To send text using Bluetooth connectivity, open Notes, write the text, and select Options >

Send > Via Bluetooth.

1 Open the application where the item you want to send

is stored. For example, to send an image to another compatible device, open Gallery.

2 Select the item and Options > Send > Via Bluetooth.

Devices with Bluetooth wireless technology within range start to appear on the display.

Device icons: computer, phone, audio or video device, and other device.

To interrupt the search, select Stop.

3 Select the device with which you want to connect. 4 If the other device requires pairing before data can be

transmitted, a tone sounds, and you are asked to enter a passcode. See ‘Pair devices’, p. 75.

5 When the connection has been established, Sending

data is shown.

The Sent folder in Messag. does not store messages sent using Bluetooth connectivity.

Tip! When searching for devices, some devices may show only the unique address (device address). To find the unique address of your device, enter the code *#2820# in the standby mode.

Pair devices

To open the paired devices view ( ), in the Bluetooth application main view, press .

Before pairing, create your own passcode (1—16 digits), and agree with the owner of the other device to use the same code. Devices that do not have a user interface have a factory-set passcode. The passcode is used only once.

To pair with a device, select Options > New paired device. Devices with Bluetooth wireless technology within range start to appear on the display. Select the device, and enter the passcode. The same passcode must be entered on the other device as well. After pairing, the device is saved to the paired devices view.

Connections

Paired devices are indicated by in the device search. To set a device as authorized or unauthorized, scroll

to a device, and select from the following options:

Set as authorized—Connections between your device

and this device can be made without your knowledge.

Connections

No separate acceptance or authorization is needed. Use this status for your own devices, such as your compatible headset or PC, or devices that belong to someone you trust.

indicates authorized devices in the paired devices view.

Set as unauthorized—Connection requests from this

device must be accepted separately every time. To cancel a pairing, scroll to the device, and select Options >

Delete. If you want to cancel all pairings, select Options > Delete all.

Tip! If you are currently connected to a device

and delete the pairing with that device, pairing is removed immediately, and the connection to the device is switched off.

Receive data using Bluetooth connectivity

When you receive data through Bluetooth connectivity, a tone sounds, and you are asked if you want to accept the message. If you accept, is shown, and the item is placed in the Inbox folder in Messag.. Messages received through Bluetooth connectivity are indicated by . See ‘Inbox—receive messages’, p. 52.

Switch off Bluetooth connectivity

To switch off Bluetooth connectivity, select Bluetooth > Off.

Infrared connection

With infrared, you can transfer data such as business cards, calendar notes, and media files with a compatible device.

Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.

Send and receive data using infrared 1 Make sure that the infrared ports of the sending

and receiving devices are pointing at each other, and that there are no obstructions between the devices. The preferable distance between the two devices is up to 1 meter (3 feet).

2 The user of the receiving device activates the infrared port.

To activate the infrared port of your device to receive data through infrared, press , and select Tools > Infrared.

3 The user of the sending device selects the desired

infrared function to start the data transfer. To send data through infrared, locate the desired file

in an application or the file manager, and select

Options > Send > Via infrared.

If data transfer is not started within 1 minute after the activation of the infrared port, the connection is cancelled and must be started again.

All items received through infrared are placed in the Inbox folder in Messaging. New infrared messages are indicated by .

When blinks, your device is trying to connect to the other device or a connection has been lost.

When is shown continuously, the infrared connection is active, and your device is ready to send and receive data using its infrared port.

Data cable

Press , and select Tools > Data cbl.. In Data cable mode, select what the USB data cable connection is used for:

PC Suite, Data transfer, or Image print. To have the device

ask the purpose of the connection each time the cable is connected, select Ask on connection.

PC connections

You can use your device with a variety of compatible PC connectivity and data communications applications. With Nokia PC Suite you can, for example, transfer images between your device and a compatible PC.

Always create the connection from the PC to synchronize with your device.

Your device as a modem

You can use your device as a modem to send and receive e-mail, or to connect to the Internet with a compatible PC by using Bluetooth connectivity, infrared, or a USB data cable (network service). Detailed installation instructions can be found in the user guide for Nokia PC Suite.

Tip! When using Nokia PC Suite for the first time, to connect your device to a compatible PC and to use Nokia PC Suite, use the Get Connected wizard available in Nokia PC Suite.

Connections

Connection manager

Press , and select Tools > Conn. mgr..

Connections

Data connections

In the active connections view, you can see the open data connections: data calls ( ), and packet data connections ( ).

Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth.

To end a connection, select Options > Disconnect. To close all open connections, select Options > Disconnect all.

To view the details of a connection, select Options >

Details. The details shown depend on the connection type.

Synchronization

Press , and select Tools > Sync. Sync enables you to synchronize your notes, calendar, or contacts with various compatible calendar and contacts applications on a compatible computer or on the Internet. You can also create or edit synchronization settings.

The synchronization application uses SyncML technology for synchronization. For information on SyncML compatibility, contact the supplier of the application with which you want to synchronize your device data.

You may receive synchronization settings in a special text message. See ‘Data and settings’, p. 52.

Synchronize data

In the Sync main view, you can see the different synchronization profiles. A synchronization profile contains the necessary settings, for example which applications are synchronized, to synchronize data in your device with a remote database on a server or compatible device.

1 Select a synchronization profile and Options >

Synchronize. The status of the synchronization

is shown on the display. To cancel synchronization before it finishes, select Cancel.

2 You are notified when the synchronization is complete.

Select Yes to view the log file showing the synchronization status and how many entries have been added, updated, deleted, or discarded (not synchronized) in your device or on the server.

Device manager

Press , and select Tools > Dev. mgr.. You may receive server profiles and different configuration settings from your network operator, service provider, or company information management department. These configuration settings may include access point settings for data connections and other settings used by different applications in your device.

To connect to a server and receive configuration settings for your device, scroll to a profile, and select Options >

Start configuration.

Server profile settings

Contact your service provider for the correct settings.

Server name—Enter a name for the configuration server. Server ID—Enter the unique ID to identify the

configuration server.

Server password—Enter a password to identify your device

to the server.

Access point—Select an access point to be used when

connecting to the server.

Host address—Enter the URL address of the server. Port—Enter the port number of the server. User name and Password—Enter your user name and

password.

Allow configuration—To receive configuration settings

from the server, select Yes.

Auto-accept all reqs.—If you want your device to ask

for confirmation before accepting a configuration from the server, select No.

Network authentic.—Select if network authentication

is used.

Connections

Office

Calculator

To add, substract, multiply, divide, and calculate square roots and percentages, press , and select

Office > Calculator.

Note: This calculator has limited accuracy and

is designed for simple calculations.

Set base currency and exchange rates

Select Type > Currency > Options > Currency rates. Before you can make currency conversions, you must select a base currency and add exchange rates. The rate of the base currency is always 1.

Note: When you change base currency, you must enter new exchange rates because all previously set exchange rates are cleared.

Converter

To convert measures from one unit to another, press , and select Office > Converter.

Converter has limited accuracy, and rounding errors

may occur.

1 In the Type field, select the measure you want to use. 2 In first Unit field, select the unit from which you want

to convert. In the next Unit field, select the unit to which you want to convert.

3 In the first Amount field, enter the value you want to

convert. The other Amount field changes automatically to show the converted value.

Notes

To write notes, press , and select Office > Notes. You can send notes to compatible devices, and save plain text files (.txt format) that you receive to Notes.

To print a note on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.

Recorder

To record voice memos, press , and select Office >

Recorder. To record a telephone conversation, open Recorder during a voice call. Both parties hear a tone

every 5 seconds during recording.

Quickoffice

To use the Quickoffice applications, press , and select

Office > Quickoffice. A list of files in the .doc, .xls,

and .ppt file formats saved on your device in the C:\Data\Documents and the E:\Documents folder and subfolders on the memory card opens.

To open a file in its respective application, press . To sort files, select Options > Sort files.

To open Quickword, Quicksheet, or Quickpoint, press to reach the desired view.

Quickword

With Quickword, you can view native Microsoft Word documents on the display of your device. Quickword supports colors, bold, italics, and underline.

Quickword supports the viewing of documents saved in .doc

format from Microsoft Word 97 or later. Not all variations or features of the mentioned file formats are supported.

Microsoft RM-132X User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual