Microsoft RM-1154 User Guide

Quick Guide
Lumia 650 Dual SIM

[ERROR: book part number not defined] Issue

1 EN RM-1154

Keys and parts

1Main camera
2 Audio connector
3Earpiece
4 Front camera
5 Volume keys
6 Power/Lock key
7Microphone
8 Charger connector
9Loudspeaker
10 Flash

Insert the SIM and memory cards

Note: Your SIM card has an effect on important

settings. Insert the SIM card before switching the
phone on.

1. Put your finger in the recess at the bottom edge
of the back cover.

2. Press the middle of the back cover, bend the cover
open, and remove it.

3. If the battery is in, put your fingernail in the recess
on its top edge, and lift it out.

4. Push the nano-SIM card into the SIM slot with the
metal contact area down, until you hear a click.

Tip: To remove the SIM, push the card in until it's

released, then pull it out.

Use only original nano-SIM cards. Use of
incompatible SIM cards may damage the card or the
device, and may corrupt data stored on the card.

5. For Lumia 650 Dual SIM: If you have a second SIM
card, push it into the SIM2 slot, until it locks into
place.

6. If you have a memory card, slide the card into the
memory card slot.

Replace the battery and back cover

1. Line up the battery contacts, and put the battery

in.

2. Press the top edge of the back cover against the
top edge of your phone, and snap the cover into
place, locking all the hooks around the edges of the
cover.