Microsoft RM-115 User Manual

Nokia 6131/6133 User Guide

RAFT

FCC Draft

Issue 1

DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION, declares that this product RM-115 is in compliance with the essential requireme nts and other relev ant provisions of Dir ective 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/.

0434

The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of thes e products as unsorted municipal waste.

Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of N okia is prohibited.

Nokia, Visual Radio, Nokia Connecting People, Xpress-on, XpressPrint, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mention ed herein may be trademarks or tradenames of their respective own ers.

Nokia tune is a sound mark of Nokia Corporation.

Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

RAFT

Java is a trademark of Sun Microsystems, Inc.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommer cial use in co nnection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connec tion with MPEG- 4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

This Nokia device complies with Directive 2002/95/EC on the restriction of the use of cer tain hazardous su bstances in electrical and electr onic equipment.

Under no circumstances shall Nokia be responsible for any loss of data or inco me or any special, incidental, consequential or indirect damages h owsoever caused.

The contents of th is document are pr ovided "as is". Ex cept as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability a nd fitness for a particu lar purpose, are made i n relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

This device may contain commodities, technology or software subject to export laws and regulations from the US and oth er countries. Dive rsion contrary to law is prohibited.

FCC/INDUSTRY CANADA NOTICE Your device may caus e TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telep hone if such interference cannot be elimin ated. If you require assistance , contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the u ser's authority to operate this equipmen t.

FCC Draft/Issue 1

RAFT

For your safety.......................... 7

General information.............. 10

Overview of functions........................ 10

Access codes......................................... 10

Configuration settings service ........ 11

Download content .............................. 12

Nokia support....................................... 12

1. Get started ......................... 13

Install SIM card and battery ............ 13

Insert a microSD card ........................ 14

Remove the microSD card ................ 14

Charge the battery.............................. 14

Open and close the phone................ 15

Switch the phone on and off........... 15

Antenna ................................................. 16

Phone strap........................................... 16

2. Your phone......................... 17

Keys and parts...................................... 17

Standby mode ...................................... 18

Keypad lock (keyguard) ..................... 21

Functions without a SIM card......... 21

3. Call functions..................... 22

Make a call ........................................... 22

Answer or reject a call....................... 23

Options during a call.......................... 24

4. Write text........................... 25

Predictive text input .......................... 25

Traditional text input......................... 26

5. Navigate the menus .......... 27

6. Messaging .......................... 28

Text messages (SMS).......................... 28

SIM messages....................................... 29

Multimedia messages (MMS) .......... 30

RAFT

Memory full .......................................... 32

Folders.................................................... 32

Postcards ............................................... 33

Flash messages .................................... 34

Nokia Xpress audio messaging........ 34

E-mail application .............................. 35

Instant messaging............................... 38

Voice messages.................................... 43

Info messages ...................................... 43

Service commands .............................. 43

Delete messages .................................. 44

Message settings................................. 44

7. Contacts.............................. 48

Search for a contact .......................... 48

Save names and phone numbers.... 48

Save details........................................... 48

Copy or move contacts...................... 49

Edit contact details ............................ 49

Synchronize all .................................... 49

Delete contacts.................................... 49

My presence ......................................... 50

Subscribed names ............................... 51

Business cards...................................... 52

Settings.................................................. 52

Groups.................................................... 53

Speed dials............................................ 53

Info, service, and my numbers ........ 53

8. Call log................................ 54

Positioning information .................... 54

9. Settings ............................. 55

Profiles ................................................... 55

Themes ................................................... 55

Tones....................................................... 55

Main display ......................................... 56

Mini display .......................................... 57

Time and date ...................................... 57

My shortcuts ......................................... 58

Connectivity .......................................... 59

Call........................................................... 65

Phone ...................................................... 66

Enhancements ...................................... 66

Configuration........................................ 67

Security .................................................. 68

Phone software updates .................... 69

Restore factory settings..................... 70

10. Operator menu ................ 70

11. Gallery.............................. 71

Print images .......................................... 71

Memory card......................................... 71

12. Media ............................... 73

Camera ................................................... 73

Media player ......................................... 74

Music player.......................................... 75

Radio ....................................................... 76

Voice recorder....................................... 78

Equalizer................................................. 78

Stereo widening ................................... 79

13. Organizer.......................... 80

Alarm clock............................................ 80

Calendar ................................................. 80

To-do list................................................ 81

Notes....................................................... 82

Calculator .............................................. 82

Countdown timer ................................ 83

Stopwatch ............................................. 83

14. Push to talk ..................... 84

Push to talk channels......................... 84

Switch PTT on and off ........................ 86

Make and receive a PTT call ............. 86

Callback requests................................. 88

Add a one-to-one contact ................ 89

PTT settings ........................................... 89

Configuration settings ....................... 90

Web ......................................................... 90

RAFT

15. Applications ..................... 91

Launch a game ..................................... 91

Launch an application........................ 91

Some application options ................. 91

Download an application .................. 92

Presenter ................................................ 92

16. SIM services ..................... 94

17. Web................................... 95

Set up browsing ................................... 95

Connect to a service........................... 95

Browse pages........................................ 96

Bookmarks ............................................. 97

Appearance settings ........................... 97

Security settings .................................. 98

Download settings .............................. 99

Service inbox ........................................ 99

Cache memory................................... 100

Browser security ............................... 100

18. PC connectivity............. 102

Nokia PC Suite................................... 102

EGPRS, HSCSD, and CSD................. 102

Data communication applications 102

19. Battery information...... 103

Charging and discharging .............. 103

Nokia battery authentication ....... 104

20. Technical Information .. 106

Care and maintenance ........ 107

Additional safety

information.......................... 108

APPENDIX ............................ 112

Index..................................... 121

Contents

RAFT

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELLING

Do not use the phone at a refuelling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

RAFT

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible products.

For your safety

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important information stored in your phone.

CONNECTING TO OTHER DE VICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.

■ About your device

The wireless device described in this guide is approved for use on the EGSM 850, 900, 1800 and 1900 networks. Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect the privacy and legitimate rights of others.

When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.

RAFT

■ Network services

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available o n all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.

Your service provider may have requ ested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your

For your safety

device may also have been specially configured for your network provider. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as multimedia messaging (MMS), browsing, e-mail application, instant messaging, presence enhanced contacts, remote synchronization, and content downloading using the browser or MMS, require network support for these technologies.

■ Shared memory

The following features in this device may share memory: gallery, contacts, text messages, multimedia messages, and instant messages, e-mail, calendar, to-do notes, Java these features may reduce the memory available for the remaining features sharing memory. For example, saving many Java applications may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as text messages, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

■ Enhancements

A few practical rules about accessories and enhancements

• Keep all accessories and enhancements out of the reach of small children.

• When you disconnect the power cord of any accessory or enhancement, grasp

• Check regularly that enhancements installed in a vehicle are mounted and

• Installation of any complex car enhancements must be made by qualified

games and applications, and note application. Use of one or more of

RAFT

and pull the plug, not the cord.

are operating properly.

personnel only.

General information

■ Overview of functions

Your phone provides many functions that are practical for daily use, such as a text and multimedia messaging, a calendar, a clock, an alarm clock, a radio, a music player, and a built-in camera. Your phone also supports the following functions:

• Plug and play online service to get the configuration settings. See “Plug and play service,”p. 16, and “Configuration settings service,” p. 11.

• Push to talk. See “Push to talk,” p. 84.

• A microSD memory card to extend the memory capacity of the phone. See “Insert a microSD card,” p. 14 and “Memory card,” p. 71.

• Active standby. See “Active standby,” p. 18.

• Audio messaging. See “Nokia Xpress audio messaging,” p. 34.

• Instant messaging. See “Instant messaging,” p. 38.

• E-mail application. See “E-mail application,” p. 35.

• Enhanced voice dialing. See “Enhanced voice dialing,” p. 22 and “Voice commands,” p. 59.

• Presence-enhanced contacts. See “My presence,” p. 50.

• Java 2 Platform, Micro Edition (J2ME

RAFT

). See “Applications,” p. 91.

■ Access codes

Security code

The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see “Security,” p. 68.

General information

PIN codes

The personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See “Security,” p. 68.

The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for some functions.

The module PIN is required to access the information in the security module. See “Security module,” p. 100.

The signing PIN is required for the digital signature. See “Digital signature,” p. 101.

PUK codes

The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (8 digits) is required to change a blocked PIN code and UPIN code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact your local service provider for the codes.

Barring password

The barring password (4 digits) is required when using the Call barring

service. See “Security,” p. 68.

■ Configuration settings service

To use some of the network services, such as mobile Internet services, MMS, Nokia Xpress audio messaging, or remote Internet server synchronization, your phone needs the correct configuration settings. You may be able to receive the settings directly as a configuration message. After receiving the settings you need to save them on your phone. The service provider may provide a PIN that is needed to save the settings. For more information on availability, contact your network operator, service provider, nearest authorized Nokia dealer, or visit the support area on the Nokia Web site, www.nokia.com/support.

When you have received the settings as a configuration message, and the settings are not automatically saved and activated, Configuration

settings received is displayed.

RAFT

General information

To save the settings, select Show > Save. If the phone requests Enter

settings' PIN:, enter the PIN code for the settings, and select OK. To

receive the PIN code, contact the service provider that supplies the settings. If no settings are saved yet, these settings are saved and set as default configuration settings. Otherwise, the phone asks Activa te saved

configuration settings?.

To discard the received settings, select Exit or Show > Discard.

■ Download content

You may be able to download new content (for example, themes) to the phone (network service). Select the download function (for example, in the Gallery menu). To access the download function, see the respective menu descriptions.

You may also be able to download updates of phone software (network service). See “Phone,” p. 66, Phone updates.

For the availability of different services, pricing, and tariffs, contact your service provider.

Important: Use only services that you trust and that offer adequate security and protection against harmful software.

■ Nokia support

Check www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.

On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia Care contact centers at www.nokia.com/customerservice.

For maintenance services, check your nearest Nokia service center at www.nokia.com/repair.

RAFT

Get started

1. Get started

■ Install SIM card and battery

Always switch the device off and disconnect the charger before removing the battery.

Keep all SIM cards out of the reach of small children.

For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.

This device is intended for use with BL-4C battery. Always use original Nokia batteries. See “Nokia battery authentication,” p. 104.

The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting, or removing the card.

To remove the back cover of the phone, press sightly (1) and slide the cover (2). Remove the battery as shown (3).

Open the SIM card holder (4). and insert the SIM card properly into the holder (5). Close the SIM card holder (6).

Replace the battery ( 7). Slide the back cover into its place (8, 9).

RAFT

Get started

■ Insert a microSD card

Keep all microSD memory cards out of the reach of small children.

1. Remove the back cover of the phone.

2. Insert the card into the microSD card slot with the golden contact surface facing down, and press it until it locks into place.

3. Close the back cover of the phone.

Use only compatible microSD cards with this device. Other memory cards, such as Reduced Size MultiMedia cards, do not fit in the microSD card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.

Use only microSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards but not all other brands may function correctly or be fully compatible with this device.

■ Remove the microSD card

Important: Do not remove the microSD card in the middle of an

operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.

You can remove or replace the microSD card during phone operation without switching the phone off.

1. Make sure that no application is currently accessing the micro SD memory card.

2. Remove the back cover of the phone.

3. Press the microSD card slightly in to release the locking.

4. Remove the microSD card from the slot.

RAFT

■ Charge the battery

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from an AC-3 or AC-4 charger.

Get started

Warning: Use only batteries, chargers, and enhancements approved by

Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

1. Connect the charger to a wall socket.

2. Connect the lead from the charger to the socket on the bottom of your phone.

If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

The charging time depends on the charger used. Charging a BL-4C battery with the AC-3 charger takes approximately 2 hours and 20 minutes while the phone is in the standby mode.

■ Open and close the phone

To open the phone press the fold release button (1). The fold opens automatically (2).

To close the phone turn the fold manually in its closed position.

To switch off a tone that sounds when you open and close the phone, see “Tones,” p. 55.

RAFT

■ Switch the phone on and off

Warning: Do not switch the phone on when wireless phone use is

prohibited or when it may cause interference or danger.

To switch the phone on or off, press and hold the power key. See “Keys and parts,” p. 17. If the phone asks for a PIN or a UPIN code, enter the code (displayed as ****), and select OK.

Get started

Set the time, time zone, and date

Enter the local time, select the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT), and enter the date. See “Time and date,” p. 57.

Plug and play service

When you switch on your phone for the first time, and the phone is in the standby mode, you are asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See "Connect to serv. support," p. 68, and “Configuration settings service,” p. 11.

■ Antenna

Your device has an internal antenna.

Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.

RAFT

■ Phone strap

Thread the strap through the eyelet of the phone as shown in the picture and tighten it.

2. Your phone

■ Keys and parts

1 Earpiece

2 Main display

3 Left and right selection keys

4 Middle selection key

5 Call key

6 Keypad

7 Infrared window

8 Fold release button

9 4-way navigation key

10 End key

11 Loudspeaker

12 Phone strap eyelet

13 Pop-PortTM connector flap

14 Charger connector

15 Camera lens

16 Volume keys (Volume up = PTT key)

17 Mini display

18 Camera key

19 Power key

RAFT

Your phone

Connector flap

To connect enhancements, open the Pop-PortTM connector flap.

Your phone

■ Standby mode

When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.

Main display

1 Signal strength of the cellular network

2 Battery charge status

3 Indicators

4 Name of the network or the operator logo

5 Clock

6 Main screen

7 Function of the left selection key is Go to

or a shortcut to another function. See “Left selection key,”p. 58.

8 Function of the middle selection key is Menu

9 Function of the right selection key is Names or

a shortcut to another function. See “Right selection key,” p. 58. Operator variants may have an operator-specific name to access an operator-specific Web site.

Active standby

In the active standby mode there is a list of selected phone features and information on the screen that you can directly access in the standby mode. To switch on the mode, select Menu > Settings > Main display >

Standby mode settings >Active standby > My active standby. In the

standby mode, scroll up or down to activate the navigation in the list. To start the feature, select Select; or to display the information, select

View. Left and right arrows at the beginning and end of a line indicate

that further information is available by scrolling left or right. To end the active standby navigation mode, select Exit.

RAFT

Your phone

To organize and change the active standby mode, activate the navigation mode, and select Options > Active standby > My active

standby > Options and the following options:

Personalise — Assign or change phone features in the standby mode.

Organise — Move the position of features in the standby mode.

Enabling active standby — Select keys to activate the standby

navigation mode. To change the settings, see “Standby mode settings,” p. 56.

To switch off the active standby mode select Options > Acti ve

standby > Off; or select Menu > Settings > Main display > Standby mode settings >Active standby > Off.

Shortcuts in the standby mode

• To access the list of dialed numbers, press the call key once. Scroll to the number or name that you want; and to call the number, press the call key.

• To open the web browser, press and hold 0.

• To call your voice mailbox, press and hold 1.

• Use the navigation key as a shortcut. See “My shortcuts,” p. 58.

• Press the camera key to start the camera (still photo).

• In camera mode press the volume keys to zoom in or out.

• Press a volume key to mute the ringing tone of an incoming call when the phone is closed.

• Press the power key to access the profiles menu on the main display.

RAFT

Indicators

You have unread messages in the Inbox folder.

You have unsent, canceled or failed messages in the Outbox folder.

The phone registered a missed call.

Your phone

, Your phone is connected to the instant messaging service, and

the availability status is online or offline.

You received one or several instant messages, and you are connected to the instant messaging service.

The keypad is locked.

The phone does not ring for an incoming call or text message.

The alarm clock is set to On.

The countdown timer is running.

The stopwatch is running in the background.

, The phone is registered to the GPRS or EGPRS network.

, A GPRS or EGPRS connection is established.

, The GPRS or EGPRS connection is suspended (on hold), for

example, if there is an incoming or outgoing call during an EGPRS dial-up connection.

A Bluetooth connection is active.

, Push to talk connection is active or suspended. See “Push to

talk,” p. 84.

If you have two phone lines, the second phone line is selected.

All incoming calls are diverted to another number.

The loudspeaker is activated, or the music stand is connected to

the phone.

Calls are limited to a closed user group.

The timed profile is selected.

, , , or

A headset, hands-free, loopset, or music stand enhancement is connected to the phone.

RAFT

Your phone

■ Keypad lock (keyguard)

To prevent the keys from being accidentally pressed, select Menu, and press * within 3.5 seconds to lock the keypad.

To unlock the keypad, select Unlock, and press * within 1.5 seconds. If the Security keyguard is set On, enter the security code if requested.

To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad automatically locks.

For Security keyguard, see “Phone,” p. 66.

When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.

■ Functions without a SIM card

Several functions of your phone may be used without installing a SIM card (for example the data transfer with a compatible PC or another compatible device). Note that when you use the phone without a SIM card, some functions appear dimmed in the menus and cannot be used. Synchronizing with a remote Internet server is not possible without a SIM card.

For an emergency call, some networks may require that a valid SIM card is properly inserted in the device.

RAFT

Call functions

3. Call functions

■ Make a call

1. Enter the phone number, including the area code.

For international calls, press + character replaces the international access code), enter the country code, the area code without the leading 0, if necessary, and the phone number.

2. To call the number, press the call key.

3. To end the call or to cancel the call attempt, press the end key, or close the phone.

To search for a name or phone number that you have saved in Contacts, see “Search for a contact,” p. 48. Press the call key to call the number.

To access the list of dialled numbers, press the call key once in the standby mode. To call the number, select a number or name, and press the call key.

Speed dialing

Assign a phone number to one of the speed-dialing keys, 2 to 9. See “Speed dials,” p. 53. Call the number in either of the following ways:

• Press a speed-dialing key, then the call key.

•If Speed dialling is set to On, press and hold a speed-dialing key until the call begins. See Speed dialli ng in “Call,” p. 65.

RAFT

twice for the international prefix (the

Enhanced voice dialing

You can make a phone call by saying the name that is saved in the contact list of the phone. A voice command is added automatically to all entries in the contact list of the phone.

If an application is sending or receiving data using a packet data connection, end the application before you use voice dialing.

Call functions

Voice commands are language-dependent. To set the language, see

Voice playback language in “Phone,” p. 66.

Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.

1. In the standby mode, press and hold the right selection key or press and hold the volume down key. A short tone is played, and Speak now is displayed.

If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing.

2. Say the voice command clearly. If the voice recognition was successful, a list with matches is shown. The phone plays the voice command of the match on the top of the list. After about

1.5 seconds, the phone dials the number; or if the result is not the correct one, scroll to another entry, and select to dial the entry.

Using voice commands to carry out a selected phone function is similar to voice dialing. See Voice commands in “My shortcuts,” p. 58.

■ Answer or reject a call

To answer an incoming call, press the call key, or open the phone. To end the call, press the end key or close the phone.

To reject an incoming call if the phone is open, press the end key. To reject an incoming call when the phone is closed, press and hold a volume key.

To mute the ringing tone, press a volume key when the phone is closed, or select Silence when the phone is open.

If a compatible headset supplied with the headset key is connected to the phone, to answer and end a call, press the headset key.

Tip: If the Divert if busy function is activated to divert the calls

(for example, to your voice mailbox), rejecting an incoming call also diverts the call. See “Call,” p. 65.

RAFT

Call functions

Call waiting

To answer the waiting call during an active call, press the call key. The first call is put on hold. To end the active call, press the end key.

To activate the Call waiting function, see “Call,” p. 65.

■ Options during a call

Many of the options that you can use during a call are network services. For availability, contact your service provider.

During a call, select Options and from the following options:

Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record,

Loudspeaker or Handset.

Network services options are Answer or Reject, Hold or Unhold, New

call, Add to conference, End call, End all calls, and the following:

Send DTMF — to send tone strings

Swap — to switch between the active call and the call on hold

Transfer — to connect a call on hold to an active call and disconnect

yourself

Conference — to make a conference call that allows up to five persons to

take part in a conference call

Private call —to discuss privately in a conference call

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

RAFT

Write text

4. Write text

You can enter text (for example, when writing messages) using traditional or predictive text input. When you write text, text input indicators appear at the top of the display. indicates traditional text input. indicates predictive text input. Predictive text input allows you to write text quickly using the phone keypad and a built-in dictionary. You can enter a letter with a single keypress. indicates predictive text input with Word suggestions. The phone predicts and completes the word before you enter all the characters.

, , or appears next to the text input indicator, indicating

the character case. To change the character case, press #.

indicates number mode. To change from the letter to number mode,

press and hold #, and select Number mode.

To set the writing language while writing text, select Options > Writing

language.

■ Predictive text input

To set predictive text input on, select Options > Prediction on.

Tip: To quickly set predictive text input on or off when writing text, press # twice, or select and hold Options.

1. Start writing a word using the 2 to 9 keys. Press each key only once for one letter. The entered letters are displayed underlined.

To insert a special character, press and hold *, or select Options >

Insert symbol. Scroll to a character, and select Use.

To write compounds words, enter the first part of the word; to confirm it, press the navigation key right. Write the next part of the word and confirm the word.

To enter a full stop, press 1.

2. When you finish writing the word and it is correct, to confirm it, press 0 to add space.

RAFT

Write text

If the word is not correct, press * repeatedly, or select Options >

Matches. When the word that you want appears, select the word and

press the navigation key.

If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell. Complete the word (traditional text input is used), and select Save.

■ Traditional text input

To set traditional text input on, select Options > Prediction off.

Press a number key, 1 to 9, repeatedly until the desired character appears. Not all characters available under a number key are printed on the key. The characters available depend on the selected writing language.

If the next letter you want is located on the same key as the present one, wait until the cursor appears, or briefly press any of the navigation keys and enter the letter.

The most common punctuation marks and special characters are available under the 1 key. For more characters, press *.

RAFT

Navigate the menus

5. Navigate the menus

The phone offers you an extensive range of functions, which are grouped into menus.

1. To access the menu, select Menu.

To change the menu view, select Options > Main menu view > List,

Grid, Grid with labels, or Tab.

To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done >

Yes.

2. Scroll through the menu, and select an option (for example,

Settings).

3. If the selected menu contains further submenus, select the one that you want (for example, Call).

4. If the selected menu contains further submenus, repeat step 3.

5. Select the setting of your choice.

6. To return to the previous menu level, select Back. To exit the menu, select Exit.

RAFT

Messaging

6. Messaging

You can read, write, send, and save text, multimedia, e-mail, audio, and flash messages and postcards. All messages are organized into folders.

■ Text messages (SMS)

With the short message service (SMS) you can send and receive text messages, and receive messages that can contain pictures (network service).

Before you can send any text or SMS e-mail message, you must save your message center number. See “Message settings,” p. 44.

To check SMS e-mail service availability and to subscribe to the service, contact your service provider. To save an e-mail address in Contacts, see “Save details,” p. 48.

Your device supports the sending of text messages beyond the character limit for a single message. Longer messages will be sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message.

The message length indicator at the top of the display shows the total number of characters left and the number of messages needed for sending. For example, 673/2 means that there are 673 characters left and that the message will be sent as a series of two messages.

RAFT

Write and send a SMS message

1. Select Menu > Messaging > Create message > Text message.

2. Enter the recipient’s phone number or e-mail address in the To: field. To retrieve a phone number or e-mail address from Contacts, select

Add > Contact. To send the message to multiple recipients, add the

desired contacts one by one. To send the message to persons in a group, select Contact group and the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently

Messaging

used. To retrieve contacts from previously incoming calls, select Add > Open Log.

3. For a SMS e-mail, enter a subject in the Subject: field.

4. Write your message in the Message: field. See “Write text,” p. 25. To insert a template into the message, select Options > Use template. To see how the message will look to the recipient, select Options >

Preview.

5. To send the message, select Send. See “Message sending,” p. 31.

Read and reply to an SMS message

When you have received a message, 1 message received or the number of new messages with messages received are shown.

1. To view a new message, select Show. To view it later, select Exit. To read the message later, select Menu > Messaging > Inbox. If more

than one message is received, select the message you want to read.

is shown if you have unread messages in Inbox.

2. To view the list of available options while reading a message, select

Options.

3. To reply to a message, select Reply > Text message, Multimedia,

Flash message, or Audio message.

To send a text message to an e-mail address, enter the e-mail address in the To: field.

Scroll down, and write your message in the Message: field. See “Write text,” p. 25. If you want to change the message type for your reply message,

select Options > Change message type.

4. To send the message, select Send. See “Message sending,” p. 31.

RAFT

■ SIM messages

SIM messages are text messages that are saved to your SIM card. You can copy or move those messages to the phone memory, but not vice versa. Received messages are saved to the phone memory.

To read SIM messages, select Menu > Messaging > Options > SIM

messages.

Messaging

■ Multimedia messages (MMS)

Note: Only devices that have compatible features can receive and

display multimedia messages. The appearance of a message may vary depending on the receiving device.

To check availability and to subscribe to the multimedia messaging network service, contact your service provider. See “Multimedia messages,” p. 45.

A multimedia message can contain text, sound, images, video clips, a business card, and a calendar note. If the message is too large, the phone may not be able to receive it. Some networks allow text messages that include an Internet address where you can view the multimedia message.

You cannot receive multimedia messages during a call or an active browsing session over GSM data. Because delivery of multimedia messages can fail for various reasons, do not rely solely upon them for essential communications.

Write and send a MMS message

The wireless network may limit the size of MMS messages. If the inserted image exceeds this limit, the device may make it smaller so that it can be sent by MMS.

1. Select Menu > Messaging > Create message > Multimedia.

2. Enter your message.

Your phone supports multimedia messages that contain several pages (slides). A message can contain a calendar note and a business card as attachments. A slide can contain text, one image, and one sound clip; or text and a video clip. To insert a slide in the message, select New; or select Options > Insert > Slide.

To insert a file in the message, select Insert; or select Options >

Insert.

3. To view the message before sending it, select Options > Preview.

4. To send the message, select Send. See “Message sending,” p. 31.

5. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add > Contact. To send the

RAFT

+ 95 hidden pages