Microsoft RM-1062 User Guide

Quick Guide
xxx

123123 Issue 1 EN RM-1062

Keys and parts

Important: For important info on the safe use of
your device and battery, read “For your safety” and
“Product and safety info” at www.microsoft.com/
mobile/support/ before you take your device into
use. The same info is available in the in-device user
guide. Select

1Earpiece
2 Audio connector AHJ 3.5 mm
3 Front camera
4 Light sensor
5 Volume keys
6 Power/Lock key
7Microphone
8Flash
9Loudspeaker
10 NFC area
11 Camera
12 Antenna area
13 Micro-USB connector

Some of the accessories mentioned in this user
guide, such as charger, headset, or data cable, may
be sold separately.

Avoid touching the antenna area while the antenna
is in use. Contact with antennas affects the
communication quality and may reduce battery life
due to higher power level during operation.

Lumia Help+Tips.

Get started

Before you start using your phone, remove the back
cover to insert the micro-SIM card.

Remove the back cover

Make sure the phone is switched off.

1. With the back of the phone facing you, put your
fingernail in the seam between the screen frame and
the top edge of the back cover. Do not use any tools,
as they may damage the phone.

2. Bend the cover open, and remove it.

3. If the battery is in, lift it out.

Insert the SIM and memory card

1. Slide the micro-SIM card into the SIM slot with the

metal contact area down.

2. If you have a memory card, slide the card into the
memory card slot.

It is recommended that you use a fast microSD card
from a well-known manufacturer.

Important: Your device uses a micro-SIM card,
also known as a mini-UICC SIM card. Use only
original micro-SIM cards. Use of incompatible SIM
cards, or use of SIM card adapters, may damage the
card or the device, and may corrupt data stored on
the card.

Replace the battery and back cover

1. Line up the battery contacts, and put the battery

in.

2. Press the bottom edge of the back cover against
the bottom edge of your phone.

3. Snap the cover into place.

4. To switch your phone on, press and hold the

power key.

Charge the battery

Plug a compatible charger into a wall outlet, and
connect the micro-USB end to your phone. You can
also charge your phone from a computer with a USB
cable, but it may take a longer time.

Tip: You can also charge your phone wirelessly.
You need a wireless charging cover, such as the
CC-3090, and a compatible wireless charger. For
more info on wireless charging, see the user guide
of your wireless charging accessory.

If the battery is completely discharged, it may take
up to 20 minutes before the charging indicator is
displayed.