Microsoft RM-1038 User Guide

Quick Guide

1108 Issue 1 EN RM-1038

Psst...

This guide isn't all there is...

There's a user guide in your phone – it's always with you,
available when needed. Check out videos, find answers to
your questions, and get helpful tips. Tap
you’re new to Windows Phone, check out the section for
new Windows Phone users.

For the online user guidance, even more info, and
troubleshooting help, go to www.nokia.com/support.

Check out the support videos at www.youtube.com/
NokiaSupportVideos.

For info on Microsoft Mobile Service terms and Privacy
policy, go to www.nokia.com/privacy.

First start-up

Your new phone comes with great features that are
installed when you start your phone for the first time.
Allow some minutes while your phone sets up.

Nokia Care. If

2

Quick Guide

Nokia Lumia 735

Contents

For your safety 4

Keys and parts 6

Get started 8

Try out the touch screen 11

Get the basics 12

Take your friends with you 13

Help and tips 14

Feature-specific information 16

Product and safety info 16

3

For your safety

We invite you to read the instructions on this guide before
using the device.

SWITCH OFF IN RESTRICTED AREAS

Switch the device off when mobile phone use is
not allowed or when it may cause interference

or danger, for example, in aircraft, in hospitals
or near medical equipment, fuel, chemicals, or blasting
areas. Obey all instructions in restricted areas.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free

to operate the vehicle while driving. Your first

consideration while driving should be road
safety.

INTERFERENCE

All wireless devices may be susceptible to

interference, which could affect performance.

QUALIFIED SERVICE

Only qualified personnel may install or repair

this product.

BATTERIES, CHARGERS, AND OTHER

ACCESSORIES

Use only batteries, chargers, and other

accessories approved by Microsoft Mobile for

use with this device. Third-party chargers that
comply with the IEC/EN 62684 standard, and that can
connect to your device micro USB connector, may be
compatible. Do not connect incompatible products.

KEEP YOUR DEVICE DRY

Your device is not water-resistant. Keep it dry.

GLASS PARTS

The device screen is made of glass. This glass

can break if the device is dropped on a hard

surface or receives a substantial impact. If the
glass breaks, do not touch the glass parts of th e device or

4

attempt to remove the broken glass from the device. Sto p
using the device until the glass is replaced by qualified
service personnel.

PROTECT YOUR HEARING

To prevent possible hearing damage, do not

listen at high volume levels for long periods.

Exercise caution when holding your device near
your ear while the loudspeaker is in use.

SAR

This device meets RF exposure guidelines when
used either in the normal use position against
the ear or when positioned at least 1.5

centimetres (5/8 inch) away from the body. The
specific maximum SAR values can be found in the
Certification Information (SAR) section of this user guide.
For more info, go to www.sar-tick.com.

When a carry case, belt clip or other form of device holder
is used for body-worn operation, it should not contain
metal and should provide at least the above-stated
separation distance from the body. Note that mobile
devices may be transmitting even if you are not making a
voice call.

5

Keys and parts

1Earpiece
2 Audio connector AHJ 3.5 mm
3 Light sensor
4 Front camera
5Volume keys
6 Power/Lock key
7Microphone
8 Antenna area
9Flash
10 Camera
11 NFC area
12 Wireless charging area (on the wireless
charging back cover)
13 Loudspeaker
14 Micro-USB connector
15 Microphone

Some of the accessories mentioned in this user
guide, such as charger, headset, or data cable,
may be sold separately.

Avoid touching the antenna area while the
antenna is in use. Contact with antennas affects
the communication quality and may reduce
battery life due to higher power level during
operation.

6

7

Get started

Before you start using your phone, remove the
back cover to insert the nano-SIM card.

Remove the back cover

Make sure the phone is switched off.

With the back of the phone facing you, place your
thumb on the back of the phone next to the
camera lens, and bend the cover open. Do not use
any sharp tools, as they may damage the phone.

8

Insert the SIM and memory card

1. If the battery is in, lift it out.

2. Slide the nano-SIM card into the SIM slot with

the metal contact area down.

3. If you have a memory card, slide the card into
the memory card slot.

It is recommended that you use a fast microSD
card from a well-known manufacturer.

Important: Your device uses a nano-SIM card,
also known as a nano-UICC card. Use of
incompatible SIM cards, or use of SIM card
adapters, may damage the card or the device, and
may corrupt data stored on the card.

9

Replace the battery and back cover

1. Line up the battery contacts, and put the

battery in.

2. Press the bottom edge of the back cover
against the bottom edge of your phone.

3. Snap the cover into place.

4. To switch your phone on, press and hold the

power key.

Charge the battery

Plug a compatible charger into a wall outlet, and
connect the micro-USB end to your phone. You
can also charge your phone from a computer with
a USB cable.

If the battery is completely discharged, it may
take up to 20 minutes before the charging
indicator is displayed.

10