Microsoft RH-58 User Manual

Nokia 6011i User Guide



931169X26

Part No. XXXXXXX, Issue No. 1 Copyright ©2004 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia 6011i, Xpress-on, Pop-Port, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners. Printed in Canada 7/2004

Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 6011i products. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.

THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

Export Controls

This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

FCC/Industry Canada Notice

Your phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Issue 1



Contents



For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Don’t use the phone at a refuelling point. Don’t use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Don’t use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Don't touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible products.



For your safety

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACKUP COPIES

Remember to make back-up copies or keep a written record of all important information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the End key as many times as needed to clear the display and return to the main screen. Enter the emergency number, then press the Talk key. Give your location. Do not end the call until given permission to do so.



Welcome

Congratulations on your purchase of the Nokia 6011i mobile phone. Your phone provides many functions which are practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator, calendar, and more. Your phone can also connect to a PC, laptop, or other device using a data cable. To personalize your phone, you can set your favorite ring tones or select an Xpress-on

■ About your device

The Nokia 6011i wireless phone described in this guide is approved for use on the CDMA 1900 network.

Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock, the phone must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.

■ Network services

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear in your device menu. Contact your service provider for more information.

color cover.



Welcome

■ Shared memory

The following features in this device may share memory: contacts, text messages, photos, images, and tones in gallery, calendar notes, games, and applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many calendar notes, may use all of the available memory. Your phone may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as photos, images, tones in gallery, text messages, and applications may have a certain memory specially allotted to them in addition to the memory shared with other features.

■ Register your phone

Make sure to register your phone at www.warranty.nokiausa.com or call 1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if you should need to call a customer center or to have your phone repaired.

■ Get help

Find your phone label

If you need help, Nokia Customer Care is available for assistance. Before calling, we recommend that you write down the following information and have it available:

• Electronic serial number (ESN)

• Your zip code

The ESN is found on the type label, which is located beneath the battery on the back of the phone. See Remove the back cover, 14 and Remove the battery, 14 for more information.

Contact Nokia

Please have your product with you when contacting either of the numbers below:

Nokia Customer Care Center, USA

Nokia Inc.



7725 Woodland Center Boulevard, Suite #150 Tampa, Florida 33614 Tel: 1-888-NOKIA-2U (1-888-665-4228) Fax: 1-813-249-9619 TTY/TDD users: 1-800-24-NOKIA (1-800-246-6542)

Customer Care Center, Canada

Nokia Products Ltd. 601 Westney Road South Ajax, Ontario L1S 4N7 Tel: 1-888-22-NOKIA (1-888-226-6542) Fax: 1-905-427-1070

Updates

From time to time, Nokia updates this guide to reflect changes. The latest version may be available at www.nokia.com. An interactive tutorial for this product may be available at the web site www.nokiahowto.com.

Accessibility solutions

Nokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information visit the web site at www.nokiaaccessibility.com.



Phone at a glance

1. Phone at a glance

■ The start screen

The start screen is home base and indicates that your phone is in idle mode.

Signal strength (1)—A higher bar indicates a stronger network signal.

Battery level (2)—A higher bar indicates more charge in the battery.

Menu (3)—Press the Left selection key to select this option.

Contacts (4)—Press the Right selection key to select this option.

■ Quick keys

At the start screen, the Four-way scroll key takes you to frequently accessed menus:

Scroll up key—Go to the contacts list.

Scroll right key—View the calendar.This key can be set to perform different functions

depending on your network service.

Scroll down key—Go to the contacts list.

Scroll left key—Quickly create a text message.

■ Indicators and icons

Depending on your wireless service provider and the model number of your phone, some or all of the following indicators and icons may appear on the start screen:



Icon Indicates...

You have new text or picture messages. See Text messages, 30.

You have new voice messages. See Voice messages,

33. Your phone keypad is locked. See Keyguard, 20.

Your phone is set to the silent profil e . See Profiles (Menu 3), 44.

Your phone is on vibrate mod e. See Customize a profile, 44.

The alarm clock is set to on. See Alarm clock, 73. The countdown timer is running. See Countdown

timer, 78. The stopwatch timer is running in the background.

See Stopwatch, 79. Integrated hands-free is active. See Using the loud-

speaker, 19. The timed profile is selected. See Profiles (Menu 3),

44.

or An enhancement is connected to the phone. See En-

hancement settings, 54.

Voice privacy encryption is acti ve (or is no t activ e ) in the network. See Voice privacy, 59

Location info sharing is set to Emergenc y or On. See Location info sharing, 46.



Phone at a glance

Icon Indicates...

You are in a digital network. See Network services,

6. You are in an analog ne tw ork. See Network ser vi c-

es, 6. You are in a 1XRTT network. See Network services,

6. You are roaming outside your home network. See

Roaming options, 60.

■ Get the most out of this guide

The following sections illustrate the various components of your phone. Familiarize yourself with these sections to help you understand the instructions that follow.

This guide uses certain terms for the steps that you are asked to perform.

• Press means to press and release a key quickly. For example, press 7 means press the key on the keypad that is labeled with the number 7 and the letters “pqrs”.

•Press and hold means to press and hold a key for 2–3 seconds; then release the key.

• Selection keys are used to select a menu option. To select an option, press the selection key below the menu item on the phone screen.

• Scroll keys are used to move up, down, left, or right in the menus.

•Talk and End keys: Press the Talk key to place a call or to answer an incoming call. Press the End key to end a call or press and hold to return to the idle screen.

■ Phone menus

Phone features are grouped according to function and are accessed through the main menus. Each main menu contains submenus and lists from which you can select or view items and customize your phone features. You can access these menus and submenus by using the scroll method or by using a shortcut.

Note: Some features may not be available, depending on your network. For more information, contact your wireless provider.



The scroll method

1. At the start screen, select Menu, and scroll up and down through the main menus using the Four-way scroll key.

As you scroll through the menus, the menu number appears in the upper right corner of the display. Below the number is a scroll bar with a tab that moves up or down on the right side of the display screen as you scroll through the menus, providing a visual representation of your current position in the menu structure.

2. When you arrive at a menu, press Select (the Left selection key) to enter submenus.

• Press Back (the Right selection key) to return to the previous menu.

• Press the End key to return to the start screen from any menu or submenu.

Shortcuts

You can go directly to almost any menu or submenu, as well as activate most features by using a shortcut.

At the start screen, select Menu; then within 3 seconds, press the key or keys associated with the menu function you would like to view or activate.

For example, to select the Meeting profile, select Menu 3-3-1 from the start screen (Menu > 3Profiles > 3Meeting > 1Select). After a brief pause, the Meeting profile is activated.

In-phone help

Many features have brief descriptions (help text) which can be viewed on the display. To view these descriptions, scroll to a feature, and wait for about 10 seconds. Press More to view all of the description, or press Back to exit.

In order to view the descriptions, you must first activate help text.

At the start screen, select Menu > Settings > Phone settings > Help text ac tivation > On or Off.



2. Set up your phone

■ Antenna

Your phone has two antennas:

• The retractable antenna is active when fully extended (1).

• The internal antenna is always active (2).

Your device has an internal antenna located towards the top of the phone. Hold the phone as you would any other telephone with the antenna area pointed up and over your shoulder.

Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the phone optimizes the antenna performance and the battery life.

Set up your phone

■ Battery

Always switch the device off, and disconnect the charger before removing the battery.



Remove the back cover

1. With the back of the phone facing you, push down on the back cover release button.

2. Slide the back cover toward the bottom of the phone and remove.

Remove the battery

After you have removed the back cover, insert your finger into the finger grip, and lift the battery from its compartment.

Replace the battery

1. Position the battery so the positive and negative indicators on the battery match up with the positive and negative indicators on the phone.

The battery label should be facing away from the phone.

2. Insert the battery, gold-colored contact end first, into the battery slot.

3. Push down on the other end of the battery to snap the battery into place.

Replace the back cover

Slide the back cover toward the top of the phone until the back cover is securely in place.

Charge the battery

1. Plug the charger into a standard ac outlet.



Set up your phone

2. Insert the charger output plug into the round jack at the bottom end of the phone.

After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

■ Turn your phone on or off

1. To turn your phone on or off, press and hold the Power key on top of the phone for at least 3 seconds.

2. Enter the security code, or PIN code, if necessary, and press OK.

■ Connect the headset

A compatible headset, such as HS-5, may be purchased with your phone or separately as an enhancement. (See Enhancements, 84 for information.)

1. Plug the headset connector into the Pop-Port™ connector at the bottom end of your phone. The icon appears on the start screen.

2. Position the headset on your ear.

With the headset connected, you can make, answer, and end calls as usual.

• Use the keypad to enter numbers.

• Press the Talk key to place a call.

• Press the End key to end a call.

You can also plug a compatible headset, such as the HS-9 Universal Headset, into the

2.5mm headset jack on the side of your phone to allow hands-free operation. (See

Enhancements, 84 for information.)



■ Change the Xpress-on™ covers

Note: Before removing the cover, always switch off the power, and disconnect

the charger and any other device. Avoid touching electronic components while changing the covers. Always store and use the device with the covers attached.

Remove the back cover

With the back of the phone facing you, push down on the back cover release button, and slide the back cover toward the bottom of the phone.

Remove the battery

After you have removed the back cover, insert your finger into the finger grip, and lift the battery from its compartment.

Remove the front cover

Gently pull the bottom of the front cover away from the rest of the phone.

Install the keymat and front cover

1. Remove the keymat from the old front cover.



Set up your phone

2. Place the keymat into the new front cover.

3. Press the front cover and keymat against the phone, and snap the front cover into place.

Warning: Always replace the front cover before replacing the battery and the back cover. Replacing the back cover first may cause damage to your phone.

Replace the battery

1. Position the battery so the positive and negative indicators on the battery match up with the positive and negative indicators on the phone.

The battery label should be facing away from the phone.

2. Insert the battery, gold-colored contact end first, into the battery slot.

3. Push down on the other end of the battery to snap the battery into place.

Replace the back cover

1. Verify that the front cover and battery have already been replaced.

2. Slide the back cover toward the top of the phone until the back cover is securely in place.



■ Make a call

Note: Before making or receiving a call, fully extend the retractable antenna.

Using the keypad

1. Enter the phone number (including the area code), and press the Talk key. (To delete a character to the left of the cursor, press Clear.)

2. Press the End key to end the call, or End call to cancel the call attempt.

Using the contacts list

1. At the start screen, scroll up or down to the entry you wish to view.

2. Press the Talk key to make the call, or press Details to view details of the entry.

Using the last dialed number

1. At the start screen, press the Talk key to display the last 20 numbers dialed.

2. Scroll to the number (or name) you wish to redial, and press the Talk key.

Conference calling

Conference calling is a network service that allows you to take part in a conference call with two other participants.

1. Make a call to the first participant.

2. With the first participant on the line, select Options > New call.

3. Enter the phone number of the second participant, or press Search to retrieve a number from the contacts list.

4. Press Flash.

The first participant is put on hold.

5. When the second participant picks up, press the Talk key to connect the calls.

6. To end the conference call, press Options > End all calls, or press the End key.



Set up your phone

■ Answer calls

Answer or silence an incoming call

1. Press the Talk key or Answer to answer the call.

2. Press the End key or Silence to mute the ringing tone; then press Answer to answer the call, or do nothing, and the call is eventually diverted to voicemail.

Answer a call with the keypad locked

To answer a call with the keypad locked, simply press the Talk key. During the call, all features function as normal. When you end or reject the call, the keypad automatically relocks. See Keyguard, 20 for details.

When the keypad is locked, calls still may be possible to the official emergency number programmed into your phone.

Adjust the earpiece volume

While in a call, scroll right or left to adjust the volume of the earpiece.

When adjusting the volume, a bar chart appears in the display indicating the volume level.

Using the loudspeaker

You can use your phone as a loudspeaker during a call. Do not hold the phone to your ear during the loudspeaker operation. While in a call:

• To activate the loudspeaker, press Loudsp.

• To deactivate the loudspeaker during a call, press Handset.

The loudspeaker is deactivated automatically when a call (or a call attempt) ends or when certain enhancements are connected.

Options during a call

Many of the options that you can use during a call, are network services. Check with your wireless service provider for more information.

1. Press Options during a call to display the following options:

Mute/Unmute—Silence your end of the call.



Loudspeaker/Handset—Activate or deactivate the loudspeaker while in a call.

New call—Initiate a conference call. See Conference calling, 18 for information.

Save—Save the number you dialed to your contacts list.

Add to name—Save the number you dialed to a contact already in the contacts list.

End all calls—Disconnect from all active calls.

Touch tones—Enter the numbers, and press Tone s to send the numbers as tones.

Contacts—View the contacts list.

Menu—View the phone menu.

2. Scroll to an option, and press Select to activate the option or enter its submenu.

■ Keyguard

With keyguard, you can lock the keypad to prevent keys from being pressed accidentally. Remember to lock your phone keypad to prevent accidental calls. If the keypad is locked, it unlocks when you receive a call. After the call, the lock automatically reactivates.

When the keyguard is on, calls still may be possible to the official emergency number programmed into your phone. Key in the emergency number, and press the Talk key.

Lock the keypad

Select Menu; then press * within 2 seconds.

Unlock the keypad

Select Unlock; then press * within two seconds.



Text entry

3. Text entry

You can use two methods for entering text and numbers:

• Standard mode is the only way to enter text into the contacts list and to rename caller groups.

• Predictive text input is a quick and easy method for writing messages or creating a calendar note.

■ Standard mode

Text (Abc)

•Press Clear to backspace the cursor and delete a character.

• Press and hold Clear to backspace continuously and delete characters.

• Press a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted, and your phone awaits the next entry.

•Press 0 to enter a space, thereby accepting a completed word.

•Press 1 as many times as necessary to scroll through a list of commonly used characters.

•Press * to display a complete list of special characters.

•Press # to switch predictive text on or off and to use predictive text in various modes. As you press #, the following icons (not the descriptions) appear in the upper left of the display screen:

Uppercase text: standard mode is on.

Lowercase text: standard mode is on.

Sentence case text: standard mode is on.



Numbers (123)

To switch to 123 mode from Abc mode, press and hold # at any message entry screen until the icon in the upper left corner of the display switches from Abc to 123 (or vice versa).

Punctuation and special characters

While at any text entry screen, press * to display special characters (press and hold * if predictive text is on). Press * again to cycle through all available characters. You can navigate through the list of special characters by using the Four-way scroll key. Once a character is highlighted, press Inse rt to insert the character into your message.

■ Predictive text input

Predictive text input allows you to write messages quickly using your keypad and the built-in dictionary. It is much faster than the standard mode method, because for each letter, you only press the corresponding key on your keypad once.

Activate/deactivate

At any text entry screen, press and hold Options. Predictive text is turned on and off, depending on its previous mode.

1. At any text entry screen, select Options > Predictive text.

2. Scroll to the language of your choice, and press Select.

Text entry

The illustration below simulates your display each time a key is pressed. For example, to write Nokia with predictive text on and with the English dictionary selected, press each of the following keys once:

6 6 5 4 2

•Press 0 to enter a space, and begin writing the next word.



Text entry

• If a displayed word is not correct, press * to see other matches. To return to the previous word in the list of matches, press Previous.

•If ? appears after a word, press Spell to add the word to the dictionary.

•Press 1 to insert a period into your message.

• Press and hold * to display special characters. Press * again to cycle through all available characters.

•Press # to switch predictive text on or off and to use predictive text in various modes. As you press # , the following icons (not the descriptions) appear in the upper left of the display screen:

Sentence cas e text: predi ct ive text is on.

Lowercase text: predictive text is on.

Uppercase text: predictive text is on.



4. Contacts list

The contacts list can hold up to 250 contacts with multiple numbers and text notes for each contact. The amount of numbers and text entries that you can save may vary, depending on length and the total number of entries in the contacts list.

■ Add new contacts

Save a name and number

1. At the start screen, use the keypad to enter the phone number you wish to save.

2. Select Options > Save.

3. Enter the name, and press OK.

Save (only) a number

1. At the start screen, use the keypad to enter the phone number you wish to save.

2. Press and hold Options.

Save an entry

1. At the start screen, select Contacts > Add new.

2. Enter the name, and press OK.

3. Enter the phone number, and press OK > Done.

Save multiple numbers and text items

You can save different types of phone numbers and short text items per name to the contacts list. The first number you save for any entry is automatically set as the default, or primary number, but the primary number can always be changed.

1. At the start screen, scroll up or down to the entry to which you wish to add a phone number or text item.

2. Select Details > Options > Add number or Add detail.

If you selected Add number , select General, Mobile, Home, Work, or Fax.



Contacts list

If you selected Add detail, select E-mail, Web address, Street addr., or Note.

3. Enter the number or text for the type you have selected, and press OK.

4. To change a number type (General, Mobile, Home, Work, or Fax), select Change type in the options list.

You can also change which phone number is the default (primary) number for the contact entry.

1. At the start screen, scroll down to select the number you wish to change, and press

Details.

2. Scroll to the number you wish to set as default, and select Options > As primary no.

Set up voice tags

For more information on setting up voice tags and other voice features, see Voice (Menu

7), 66.

Caller groups

You can add contacts list entries to any of five caller groups, and assign a unique ringing tone or graphic to that group. This enables you to identify callers from the group by their unique ringing tone or graphic.

Setup a group

1. At the start screen, scroll down to display a list of entries in your contacts list.

2. Scroll to a name you would like to add to a caller group, and press Details.

3. Select Options > Caller groups.

4. Scroll to the caller group to which you would like to add the name, and press Select.

Options

1. At the start screen, select Contacts > Caller groups.

Family, VIP, Friends, Business, and Other are the available caller groups.

2. Scroll to highlight a group, and press Select to display the following caller group options:

Rename group—Rename the group to your preference.

Group ringing tone—Set the ringing tone for the group.



Group logo—Turn the graphic for the caller group on or off or view the graphic.

Group members—Add or remove members from the caller group.

Set up 1-touch dialing

You can associate any entry in the contacts list with a key from 2–9; then dial those entries by pressing and holding the assigned key. See 1-touch dialing, 47 to activate or deactivate 1-touch dialing.

Assign a key to 1-touch dialing

1. At the start screen, select Contacts > 1-touch dialing .

2. Scroll to an (empty) 1-touch dialing slot, and press Assign.

3. Enter the number (including the area code), and press OK, or press Search to retrieve a number from the contacts list.

4. Enter a name for the number, and press OK.

If 1-touch dialing is off, the phone displays a prompt asking if you would like to turn 1-touch dialing on.

5. Press Yes to activate 1-touch dialing.

Change 1-touch dialing numbers

1. At the start screen, select Contacts > 1-touch dialing .

2. Scroll to the 1-touch dialing entry you wish to change, and select Options > Change.

3. Enter the new number; or press Search to retrieve a number from the contacts list, and press OK.

4. Enter a name for the entry, and press OK.

Delete 1-touch dialing numbers

1. At the start screen, select Contacts > 1-touch dialing .

2. Scroll to the 1-touch dialing location you wish to delete, and press Options.

3. Select Delete > OK.

■ Edit contacts list entries

1. Scroll to highlight the entry you would like to edit, and press Details.



2. Scroll to the phone number or detail you wish to edit, and press Options.

3. Select one of the following options:

Add voice tag—Add a voice tag to the contact.

Edit number—Edit an existing phone number of the contact.

Delete number—Delete a phone number from the contact.

Use number—Edit the number and associate a name with the number.

View—View the details of the contact.

Change type—Change the number type to General, Mobile, Home, Work, or Fax or

the detail type to E-mail, Web address, Street addr., or Note

As primary no.—Change the default number of the contact.

Add number—Add a number to the contact.

Add detail—Add an address or note to the contact.

Caller groups—Add the contact to an existing caller group.

Custom tone—Add a custom ring tone to the contact.

Send bus. card—Send the contact as a business card to another phone.

Send message—Create and send the contact a message.

1-touch dialing—Add the contact to your 1-touch dialing list.

Edit name—Edit the name of the contact.

View name—View the name of the contact.

Delete—Delete the entire contact entry from your contacts list.

4. Edit the option to your preference, and press OK.

Contacts list

■ Delete contacts list entries

1. At the start screen, select Contacts > Delete.

2. To delete individual entries, select One by one.

3. Scroll to the entry you wish to delete, and select Delete > OK to confirm.

4. To delete the entire contents of your contacts list, select Delete all > OK.

5. Enter the security code, and press OK. See Security code, 59 for more information.



■ View the contacts list

1. At the start screen, select Contacts. The following options are displayed:

Search—Find a name or select from a list.

Add new—Add a contact to your contacts list.

Edit name—Edit an existing name.

Delete—Delete a name and its associated numbers.

Add number—Add a number to an existing name.

Settings—Change the contacts list view or check the memory status of your phone.

1-touch dialing—View or modify the list of 1-touch dialing numbers.

Voice tags—Attach, listen to, or modify a voice tag to a contact in the

contacts list.

My number—View your own phone number.

Caller groups—View and edit the properties for any of the caller groups, including Family, VIP, Friends, Business, or Other.

2. Scroll to an item, and press Select to activate the feature or enter its submenu.

Search for a name

1. At the start screen, scroll down to display the contents of your contacts list.

2. Press the key which corresponds to the first letter of the name for which you are performing a search.

3. Scroll up and down to select a contact, and press Details to view the details.

Configure settings

You can select how the contacts appear in your contacts list and view the amount of memory used or available in your phone.

1. At the start screen, select Contacts > Settings.

2. Select one of the following options:

Scrolling view—Select Name list, or Name and no. view.



Contacts list

Memory status—View the amount of phone memory used as well as the amount of

phone memory available

Note: For more information on used and available memory, see Shared memory,

■ Send and receive contacts (business cards)

You can send and receive an entry in your contacts list using text messaging, if supported by your wireless provider.

Send a business card

You can send a business card as a text message to a compatible phone or other handheld device.

1. Highlight the entry from the contacts list that you wish to send, and select Details >

Options > Send bus. card > Via text msg. > Primary no. or All details.

Note: The Primary no. or All details options appear only if you have more than one number or detail saved to the contact entry.

2. Enter the number for your recipient, or press Search to retrieve a number from your contacts list.

3. Press OK and the business card is sent.



5. Messages (Menu 1)

If you have subscribed to a messaging service through your wireless provider, you can send and receive text messages to compatible phones that also subscribe to a compatible message service. You m ay also be able to attach and send predefined images from the Templates folder.

Composed messages can be up to 160 characters in length. Using special (Unicode) characters take up more space. If there are special characters in your message, the indicator may not show the message length correctly. Before the message is sent, the phone tells you if the message exceeds the maximum length allowed for one message. To cancel sending, press Cancel, or save the message in the inbox.

Note: When sending messages, your device may display Me ssage sent. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details, about messaging services, check with your service provider.

■ Text messages

Write and send

1. At the start screen, select Menu > Messages > Text messages > Create message >

Add number or Add e-mail.

To go quickly to the Create message display, scroll left from the start screen.

2. Enter the recipient’s phone number; or e-mail address, or press Search to retrieve a number from your contacts list, and press OK.

3. Repeat step 2 to add more recipients, and press OK.

4. Select Options > Edit message.

5. Compose a message using the keypad, and select Options > Send.

Options

When you create a text message, depending on the mode of text input you are using and the features supported by your wireless service provider, some or all of the following options are available:



+ 75 hidden pages