Includes RSA BSAFE cryptographic or security protocol software from
RSA Security.
The information contained in this user guide was written for the Nokia 6225
product. Nokia operates a policy of ongoing development. Nokia reserves the right
to make changes to any of the products described in this document without prior
notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF
DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR
INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED
BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE
ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES
THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT
PRIOR NOTICE.
EXPORT CONTROLS
This product contains commodities, technology or software exported from the
United States in accordance with the Export Administration regulations. Diversion
contrary to U.S. law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your phone may cause TV or radio interference (for examp le, when using a telephone
in close proximity to receiving equipment). The FCC or Industry Canada can require
you to stop using your telephone if such interference cannot be eliminated. If you
require assistance, contact your local service facility. This device complies with part
15 of the FCC rules. Operation is subject to the condition that this device does not
cause harmful interference.
Remember to make back-up copies or keep a written record of all
important information stored in your phone.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press the End key as
many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear
the display and return to the main screen. Key in the emergency number,
then press the Talk key. Give your location. Do not end the call until
given permission to do so.
Congratulations on your purchase of the Nokia 6225 mobile phone. Your phone
provides many functions which are practical for daily use, such as a radio,
hands-free loudspeaker, alarm clock, calculator , calendar, and more. Your phone
can also connect to a PC, laptop, or other device using a data cable or the built-in
IR port. To personalize your phone, you can set your favorite ring tones, create a
go-to-menu, and select an Xpress-on
• ABOUT YOUR DEVICE
The wireless phone described in this guide is approved for use on the AMPS 800,
CDMA 800 and 1900, and 1XRTT networks. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the phone must be switched on. Do not switch the device on when wireless
phone use may cause interference or danger.
• NETWORK SERVICES
To use the phone you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to function.
These Network Services may not be available on all networks or you may have to
make specific arrangements with your service provider before you can utilize
Network Services. Your service provider may need to give you additional
instructions for their use and explain what charges will apply. Some networks may
have limitations that affect how you can use Network Services. For instance, some
networks may not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear in your device menu. Contact
your service provider for more information.
• SHARED MEMORY
The following features in this device may share memory: contacts, text and
multimedia messages, photos, graphics, and ringing tones in gallery, calendar and
to-do notes, games and applications. Use of one or more of these features may
reduce the memory available for the remaining features sharing memory. For
example, saving many calendar notes, may use all of the available memory. Your
phone may display a message that the memory is full when you try to use a shared
memory feature. In this case, delete some of the information or entries stored in
the shared memory features before continuing. Some of the features, such as
multimedia messages, photos, graphics, or ring tones in gallery, images, and
applications may have a certain amount of memory specially allotted to them in
addition to the memory shared with other features.
• REGISTER YOUR PHONE
Make sure to register your phone at www.warranty.nokiausa.com or call
1-888-NOKIA-2U (1-888-665-4228) so tha t we can serve your needs better if you
should need to call a customer center or to have your phone repaired.
•GET HELP
Find your phone label
If you need help, Nokia Customer Care is
available for assistance. Before calling, we
recommend that you write down the
following information and have it
available:
•Electronic Serial Number (ESN)
•Your zip code
The ESN is found on the type label, which
is located beneath the battery on the back of the phone.
Contact Nokia
Please have your product with you when contacting either of the numbers below:
Nokia Customer Care Center, USACustomer Care Center, Canada
Nokia Inc.
7725 Woodland Center Boulevard Suite #150
Tampa, Florida 33614
From time to time, Nokia updates this guide to reflect changes. The latest version
may be available at www.nokia.com. An interactive tutorial for this product may
be available at the web site www.nokiahowto.com.
Accessibility solutions
Nokia is committed to making mobile phones easy to use for all individuals. For
more information about phone features, enhancements, alternate format user
guides, and other Nokia products designed with your needs in mind, visit the web
site www.nokiaaccessibility.com or call 1-888-665-4228 for more information.
The start screen is “home base” and indicates your phone is in idle mode.
Signal strength
Menu
Battery level
Contacts
Signal strength—A higher bar indicates a stronger network signal.
Battery level—A higher bar indicates more power in the battery.
Menu—Press the Left selection key to select this option.
Contacts—Press the Right selection key to select this option.
Quick keys
At the start screen, the four-way scroll key instantly takes you to frequentlyaccessed menus:
•Scroll up key—Go to the contacts list.
•Scroll right key—View the calendar.
•Scroll down key—Go to the contacts list.
•Scroll left key—Create a message.
Indicators and icons
IconIndicates...
You have one or more text or picture messages. See “Read and reply”
on page 21.
You have one or more multimedia messages. See “Read and reply” on
page 25.
You have attached a picture to a multimedia message. See “Write and
send” on page 24.
You have one or more voice messages. See “Voice messages” on
page 26.
Your phone’s keypad is locked, see “Lock the keypad” on page 13.
Your phone is set to the Silent profile. See “Profiles (Menu 3)” on
page 36.
The alarm clock is set to On. See “The alarm clock” on page 63.
The countdown timer is running. See “The countdown timer” on
The stopwatch timing is running in the background, see “The
stopwatch” on page 68.
When shown continuously, the IR connection is activated and your
phone is ready to send or receive data via its IR port; when blinking,
your phone is trying to connect to the other device or a connection
has been lost. See
All calls are forwarded to another number. See “Call forwarding” on
page 49.
Integrated handsfree is active, see “The loudspeaker” on page 13.
The timed profile is selected, see “Profiles (Menu 3)” on page 36.
or An enhancement is connected to the phone.
or Voice privacy encryption is active (or is not active) in the network.
or Location info sharing is set to Emergency or On. See “Set location info
sharing” on page 37.
You are in a 1XRTT network. See “Network services” on page 3.
You are in a digital network. See “Network services” on page 3.
You are in an analog network. See “Network services” on page 3.
“Send and receive data using IR” on page 42.
• GET THE MOST OUT OF THIS GUIDE
The following sections illustrate the various components of your phone. Familiarize
yourself with these sections to help you understand the instructions that follow.
This guide uses certain terms for the steps that you are asked to perform.
•Press means to press and release a key quickly. For example, Press 7 means
press the key on the keypad that is labeled with the number 7 and the letters
“p, q, r, s”.
•Press and hold means to press and hold a key for 2–3 seconds, then release the
key.
•Selection keys are used to select a menu option. To select an option, press the
selection key below the menu item on the phone’s screen.
•Scroll keys are used to move up, down, left, or right in the menus.
•Talk and End keys: Press the Talk key to place a call or to answer an incoming
call. Press the End key to end a call or press and hold to return to the idle
screen.
Phone features are grouped according to function and are accessed through the
main menus. Each main menu contains submenus and lists from which you can
select or view items and customize your phone features. You can access these
menus and submenus by using the scroll method or by using a shortcut.
Note: Some features may not be available, depending your network. For
more information, contact your wireless provider.
The scroll method
1At the start screen, select Menu and scroll
through the main menus using the up and
down four-way Scroll key.
A scroll bar with a tab moves up or down on the
display screen as you scroll through the menus,
providing a visual representation of your
current position in the menu structure.
2When you arrive at a menu, press Select
(the Left selection key) to enter submenus.
•Press Back (the Right selection key) to return to the previous menu.
•Press the End key to return to the start screen from any menu or
submenu.
Shortcuts
You can go directly to almost any menu or submenu, as well as activate most
features by using a shortcut.
At the start screen, select Menu, then within 3 seconds, press the key or keys
associated with the menu function you would like to view or activate.
For example, to select the Meeting profile, select Menu 3-3-1 from th e sta rt
screen (Menu >
profile is activated.
3
Profiles > 3Meeting > 1Select). After a brief pause, the Meeting
In-phone help
Many features have brief descriptions (help text) which can be viewed on the
display. To view these descriptions, scroll to a feature and wait for about 10
seconds. Press More to view all of the description, or press Back to exit.
In order to view the descriptions, you must first activate help text .
1At the start screen, select Menu > Settings > Phone settings > Help text
Your device has an internal antenna located towards the top of the phone. Hold the
phone as you would any other telephone with the antenna area pointed up and
over your shoulder.
Note: As with any other radio transmitting device,
do not touch the antenna unnecessarily when the
device is switched on. Contact with the antenna
affects call quality and may cause the phone to
operate at a higher power level than otherwise
needed. Avoiding contact with the antenna area
when operating the phone optimizes the antenna
performance and the battery life.
The battery
Always switch the device off and disconnect the charger before removing
the battery.
REMOVE THE BACK COVER
1With the back of the phone facing you, push
down on the back cover release button.
2Slide the back cover toward the bottom of
the phone and remove.
REMOVE THE BATTERY
3After you have removed the back cover, insert
your finger into the finger grip and lift the
battery from its compartment.
REPLACE THE BATTERY
1Position the battery so the gold-colored
contacts match up with those on the phone.
The battery label should be facing away from
the phone.
2Insert the battery, gold-colored contact end
first, into the battery slot.
3Push down on the other end of the battery to snap the battery into place.
phone until you hear a click and see the
back cover release button.
CHARGE THE BATTERY
1Plug the charger transformer in to a
standard ac outlet.
2Insert the charger output plug
into the round jack at the bottom
end of the phone.
After a few seconds, the battery
indicator in the display star ts to
scroll from bottom to top. If the
battery is completely flat, it may
take a few minutes before the
charging indicator appears on
the display or any calls can be made.
Turn your phone on or off
1To turn your phone on or off, press and hold the power
key on top of the phone for at least 3 seconds.
2Enter the security code if necessary and press OK. See
“Security code” on page 48 for more information.
Connect the headset
A compatible headset may be purchased with your phone or
separately as an enhancement. (See
page 72 for information.)
1Plug the headset connector into the Pop-Port™
connector at the bottom end of your phone.
2Position the headset on your ear.
With the headset connected, you can make,
answer, and end calls as usual.
Note: Before removing the cover, always switch off the power and
disconnect the charger and any other device. Avoid touching electronic
components while changing the covers. Always store and use the device
with the covers attached.
REMOVE THE BACK COVER AND THE BATTERY
See “Remove the back cover” and “Remove the battery” on page 9 for instructions
on removing the back cover and battery.
REMOVE THE FRONT COVER
1Gently pull the bottom of the front cover
away from the rest of the phone and remove.
INSTALL THE KEYMAT AND FRONT COVER
2Remove the key mat from the old front cover
and place it into the new front cover as
shown.
3Press the front cover and keymat against the
phone and snap the front cover into place.
REPLACE THE BATTERY AND BACK COVER
See “Replace the battery” on page 9 and “Replace the back cover” on page 10 for
instructions on replacing the battery and back cover.
1Enter the phone number (including the area code), and press the Talk key.
(To delete a character to the left of the cursor, press Clear.)
2Press the End key to end the call or to cancel the call attempt.
Using the contacts list
1At the start screen, scroll to the entry you wish to view.
2Press the Talk key to make the call, or press Details to view details of the entry.
Using the last dialed number
1At the start screen, press the Talk key to display the last 20 numbers dialed.
2Scroll to the number (or name) you wish to redial and press the Talk key.
Conference calling
Conference calling is a Network Service that allows you to take part in a
conference call with two other participants.
1Make a call to the first participant.
2With the first participant on the line, select Options > New call and
press Select.
3Enter the phone number of the second participant, or press Find to retrieve a
number from the contacts list.
4Press Flash.
The first participant is put on hold.
5When the second participant picks up, press the Talk key to connect the calls.
6To end the conference call, press Options > End all c alls or press the End key.
• ANSWER CALLS
Answer or silence an incoming call
1Press the Talk key to answer the call.
2Press the End key or Silence to mute the ringing tone; you can then press
Answer to answer the call or press Reject (or do nothing) and the call is
eventually diverted to voicemail.
Answer a call with the keypad locked
To answer a call with the keypad locked, simply press the Talk key. Du ring the call,
all features function as normal. When you end or reject the call, the keypad
automatically re-locks. See
When the phone is locked, calls still may be possible to the official emergency
number programmed into your phone.
•To increase the volume of a call, press the top of
the volume key on the left side of the phone.
•To decrease the volume of a call, press the
bottom of the volume key on the left side of the
phone.
•When adjusting the volume, a bar chart appears
in the display indicating the volume level.
Volume
key
The loudspeaker
You can use your phone as a loudspeaker during a call. Do not hold the phone to
your ear during the loudspeaker operation.
•To activate the loudspeaker, press Loudsp.
•To deactivate the loudspeaker during a call, press Handset.
The loudspeaker is deactivated automatically when a call (or a call attempt) ends
or when certain enhancements are connected.
Options during a call
Many of the options that you can use during a call, are Network Services. Check
with your wireless service provider for more information.
1Press Options during a call to display a list of options available during a call.
2Scroll to an option and press Select to activate the option or enter its
submenu.
• KEYGUARD
With keyguard, you can lock the keypad to prevent keys from being pressed
accidentally. Remember to lock your phone keypad to prevent accidental calls. If
the keypad is locked, it unlocks when you receive a call. After the call, the lock
automatically reactivates.
When the keyguard is on, calls still may be possible to the official emergency
number programmed into your phone. Key in the emergency number and press the
Talk key.
Lock the keypad
Select Menu with the Left selection key, then press the * key within two seconds.
Unlock the keypad
Select Unlock with the Left selection key, then press the * key within two seconds.
You can use two methods for entering text and numbers:
•Standard mode is the only way to enter text into such things as the contacts
list, calendar notes, and to rename caller groups.
•Predictive text input is a quick and easy method for writing messages, creating
a calendar note, or making a to-do list.
• STANDARD MODE
Text (Abc)
•Press a key once to insert the first letter on the key, twice for the second letter,
etc. If you pause briefly, the last letter in the display is accepted and your
phone awaits the next entry.
•Press the 0 key to enter a space thereby accepting a completed word
•Press the 1 key to enter a period (.)
•Press the * key to display special characters. See more about special characters
on the following pages
Numbers (123)
To switch to 123 mode from Abc mode, press and hold the # key at any message
entry screen until the icon in the upper left corner of the display switches from Abc
to 123 (or vice versa).
•Press Clear to backspace the cursor and delete a character
•Press and hold Clear to backspace continuously and delete characters
Punctuation and special characters
While at any text entry screen, press the * key to display special characters (press
and hold the * key if predictive text is on). The following special characters are
available:
,‘?!“-()
.
@/:_;+&
=<>£$
]{}\~^¡¿§
#l
%
¤[
¥
*
You can navigate through the list of special characters by using the four-way scroll
key. Once a character is highlighted, press Insert to insert the character into your
message.
Predictive text input allows you to write messages quickly using your keypad and
the phone’s built-in dictionary. It is much faster the standard mode method,
because for each letter, you only press the corresponding key on your keypad once.
Activate/deactivate
At any text entry screen, press and hold Options. Predictive text is turned on and
off, depending on its previous mode.
OR
1At any text entry screen, select Options > Predictive text and press Select.
2Scroll to the language of your choice and press Select.
Note: The language setting affects the time and date formats of the clock,
alarm clock, and calendar.
Text entry
The illustration below simulates your display each time a key is pressed. For
example, to write Nokia with predictive text on and with the English dictionary
selected, press each of the following keys once:
the 6 key the 6 key the 5 key the 4 key the 2 key
•Press the 0 key to enter a space and begin writing the next word.
•If a displayed word is not correct, press the * key to see other matches. To
return to the previous word in the list of matches, press Previous.
•If ? appears after a word, press Spell to add the word to th e dictionary.
•Press the 1 key to insert a period into your message.
•Press and hold the * key to display special characters. Press the * key again to
cycle through all available characters.
•Press the # key to switch predictive text on or off and to use predictive text in
various modes. As you press the # key, the following icons (not the
descriptions) appear in the upper left of the display screen:
Uppercase text; standard mode is On
Lowercase text; standard mode is On
Sentence case text; standard mode is On
Sentence case text; predictive text is On
Lowercase text; predictive text is On
The contacts list can hold up to 500 contacts, with multiple numbers and text
notes for each contact. The amount of numbers and text entries that you can save
may vary, depending on length and the total number of entries in the contacts list.
• ADD NEW CONTACTS
Save a name and number
1At the start screen, enter the phone number you wish to save.
2Select Options > Save and press Select.
3Enter the name and press OK.
Save (only) a number
1At the start screen, enter the phone number you wish to save.
2Press and hold Options.
Save an entry
1At the start screen, select Contacts > Addcontact and press Select.
2Enter the name and press OK.
3Enter the phone number , and press OK > Done.
Save addresses and notes
To save an address or note, you need to add it to an existing entry (contact).
1Scroll down to the entry to which you would like to add an address or note.
2With the entry highlighted, press Details.
3Select Options > Add detail and press Select.
You can add an E-mail address, Web address, Street address, or Note to
the entry.
4Scroll to the address or note of your choice and press Select.
5Enter the text for the note or address and press OK.
Save multiple numbers and text items
You can save different types of phone numbers and short text items per name to
the contacts list. The first number you save for any entry is automatically set as the
default, or primary number, but the primary number can always be changed.
1At the start screen, scroll down to the entry to which you wish to add a phone
number or text item.
2Press Details > Options > Add number or Add detail and press Select.
3Scroll to General, Mobile, Home, Work, Fax, E-mail address, Web address,
Street address, or Note and press Select.
4Enter the number or text for the type you have selected and press OK.
5To change the type, select Change type in the options list.
You can also change which phone number is the default (primary) number for the
contact entry.
1At the start screen, scroll down to the entry you wish to change, and press
Details.
2Scroll to the number you wish to set as default, elect Options > As primary
no. and press Select.
Set up voice tags
For more information on setting up voice tags and other voice features, see “Voice
(Menu 10)” on page 58.
Caller groups
You can add contacts list entries to any of five caller groups, and then assign a
unique ringing tone or graphic to that group. This enables you to identify callers
from the group by their unique ringing tone or graphic.
SETUP A GROUP
1At the start screen, press the Scroll down key to display a list of entries in your
contacts list.
2Scroll to a name you would like to add to a caller group and press Details.
3Select Options > Caller groups and press Select.
4Scroll to the caller group to which you would like to add the name and
press Select.
OPTIONS
1At the start screen, select Contacts > Caller groups and press Select.
Family, VIP, Friends, Business, and Other are the available caller groups.
2Use the four-way Scroll key to highlight a group and press Select to display
the following caller group options:
Rename group—Rename the group to your preference.
Group ringing tone—Set the ringing tone for the group.
Group logo—Turn the graphic for the caller group on or off.
Group members—Add or remove members from the caller group.
Set up 1-touch dialing
You can associate any entry in the contacts list with a key from 2–9; then dial
those entries by pressing and holding the assigned key.
ASSIGN A KEY TO 1-TOUCH DIALING
1At the start screen, select Contacts > 1-touch dialing and press Select.
2Scroll to any empty slot and press Assign.
3Enter the number (including the area code) and press OK, or press Find to
If 1-touch dialing is off, the phone displays a prompt asking if you would like
to turn 1-touch dialing on.
5Press Yes to activate 1-touch dialing.
CHANGE 1-TOUCH DIALING NUMBERS
1At the start screen, select Contacts > 1-touch dialing and press Select.
2Scroll to the 1-touch dialing entry you wish to change and select Options >
Change and press Select.
3Enter the new number, or press Find to retrieve a number from the contacts
list, and press OK.
4Enter a name for the entry and press OK.
DELETE 1-TOUCH DIALING NUMBERS
1At the start screen, select Contacts > 1-touch dialing and press Select.
2Scroll to the 1-touch dialing location you wish to delete and press Options.
3Scroll to Delete and press Select.
4Press OK to delete the key assignment.
• EDIT CONTACTS LIST ENTRIES
1Scroll to the entry you would like to edit and press Details.
2Scroll to the phone number you wish to edit and press Options.
3Scroll to one of the following options and press Select:
Add voice tag—Add a voice tag to the contact.
Edit number—Edit an existing phone number of the contact.
Delete number—Delete a phone number from the contact.
View—View the details of the contact.
Change type—Change the number type to General, Mobile, Home, Work, or
Fax or the detail type to E-mail, Web address, Street address, or Note.
As primary no.—Change the default number of the contact.
Add number—Add a number to the contact.
Add detail—Add an address or note to the contact.
Add image—Add an image or photo from the gallery to the contact.
Caller groups—Add the contact to an existing caller group.
Custom tone—Add a custom ring tone to the contact.
Send bus. card—Send the contact as a business card to another phone.
Send message—Create and send the contact a message.
1-touch dialing—Add the contact to your 1-touch dialing list.
Edit name—Edit the name of the contact.
View name—View the name of the contact.
Delete—Delete the entire contact entry from your contacts list.
1At the start screen, select Contacts > Delete and press Select.
2To delete individual entries, scroll to One by one and press Select.
3Scroll to the entry you wish to delete, press Delete> OK to confirm.
4To delete the entire contents of your contacts list, scroll to Delete all.
5Press Select, then press OK to confirm.
6Enter the security code and press OK. See “Security code” on page 48 for more
information.
• VIEW THE CONTACTS LIST
1At the start screen, select Contacts. The following menu items appear:
Search—Find a name or select from a list.
Add new—Add a contact to your contacts list.
Edit name—Edit an existing name.
Delete—Delete a name and its associated numbers.
Add number—Add a number to an existing name.
Settings—Change the contacts list view or check the memory status of your
phone.
1-touch dialing—View or modify the list of 1-touch dialing numbers.
Voice tags—Attach, listen to, or modify a voice tag to a contact in the
contacts list.
Own number—View your own phone number.
Caller groups—View and edit the properties for any of the caller groups,
including Family, VIP, Friends, Business, or Other.
2Scroll to an item and press Select to activate the feature or enter its submenu.
Search for a name
1At the start screen, press the Scroll down key to display the contents of your
contacts list.
2Press the key which corresponds to the first letter of the name for which you
are performing a search.
3Scroll up and down to select a contact and press Details to view the details.
Configure settings
You can select how the contacts appear in your contacts list and view the amount
of memory used or available in your phone.
1At the start screen, select Contacts > Settings and press Select.
2Scroll to one of the following options and press Select to enter the submenu:
Scrolling view—Select Name list, Name and number, or Name and
image view.
If you have subscribed to a mes sag ing ser vic e t hro ug h your
wireless provider, you can send and receive messages to
compatible phones that also subscribe to a compatible
message service.
enhanced messages, multimedia messages and e-mail messages.
• TEXT MESSAGES
Write and send
1At the start screen, select Menu > Messages > Text messages > Create
message > Text > Edit message and press Select.
2After a brief pause, the message entry screen appears in the display.
3Compose a message using the keypad and press Options.
4Scroll to Send and press Select.
5Scroll to Add number and press Select.
6Enter the recipient’s phone number, or press Find to retrieve a number from
your contacts list, and press OK.
TEMPLATES
Templates are short, pre-written messages which can be recalled and inserted into
new text messages when you’re short on time.
1At the start screen, select Menu > Messages > Text messages > Create
message > Text > Edit message and press Select.
2Press Options, scroll to Use template and press Select.
3Scroll to one of the available templates and press Select.
4Enter the te xt into your new message and press Options > Send > Add
number and press Select.
5Enter the recipient’s phone number, or press Find to retrieve a number from
your contacts list, and press OK.
Read and reply
When you receive a message, your phone beeps, and Message received and the
unopened letter icon (
You may also be able to send and receive picture messages,
When sending messages, your device may display the words “Message Sent.” This is an indication that the message has been sent by your device
to the message center number programmed into your device. This is not an
indication that the message has been received at the intended destination.
For more details, about messaging services, check with your service
provider.
Note: To go quickly to the Create message display, press the Scroll left key
from the start screen.
1Press Show to read the message, or Exit to move it to your inbox.
When you have unopened messages in your inbox, is shown in the upper
left corner of the start screen as a reminder.
Use the scroll keys (the Scroll up key or the Scroll down key) to view the whole
message if necessary.
2Select Options > Reply and press Select.
3Select a Start reply with option, then compose your reply using the keypad.
4Select Options > Send and press Select.
Options
When you create a text message, depending on the mode of text input you are
using and the features supported by your wireless service provider, some or all of
the following options are available:
Send—Send the message to one recipient.
List recipients—Send the message to more than one recipient.
Settings—Set the priority of the message.
Save message—Select Archive to save the message in your archive; select
Templates to save the me ssage as one of your predefined templates.
Clear text—Erase the text clipboard.
Exit editor—Save the message to your archive automatically and leave the
message editor.
Insert contact—Insert a name from your contacts list into your message.
Insert number—Insert a phone number or find a phone number in the
contacts list.
Use template—Insert a predefined template into your message.
Insert picture—Insert a picture from the Gallery folder.
Insert/Edit word—Enter or edit the text of a new word that might not appear
in the predictive text dictionary.
Insert symbol—Insert a special character into your message.
Predictive text—Choose a predictive text language and turn predictive text on
or off.
Matches—View matches found in the dictionary for the word you want to use.
When you read or reply to a text message, the following options are available:
Delete—Discard the message.
Reply—Reply to the message. Create the message and press Options, then
Send. The sender’s phone number or e-mail is used as the default
Use number—Choose Save, Add to contact, Send message, or Call.
Save—Save the message to a folder.
Forward—Forward the message to another phone number.
Rename—Edit the title of the message.
1At the start screen, select Menu > Messages > Text messages > Message
Settings > Sending options and press Select.
2Scroll to the setting you wish to change and press Select:
Priority—Set the priority of the note as Urgent or Normal and press Select.
Delivery note—A note is sent to you confirming delivery of the message. Scroll
to On or Off and press Select.
Send callback number—A callback number is sent to the recipient. Scroll to
Off or your phone number and press Select.
Settings
When the message memory is full, your phone cannot send or receive any new
messages. However, you can set your phone to automatically replace old messages
in the Inbox and Outbox folders when new ones arrive.
1At the start screen, select Menu > Messages > Text Messages > Message
settings > Other settings and press Select.
2Scroll to the setting you wish to change and press Select.
Message font size—Scroll to Small font or Large font and press Select.
Message overwriting—Scroll to Outbox only, Inbox only, Outbox and inbox,
or Off and press Select.
Save to outbox when sending—Scroll to Always save, Always prompt, or Off
and press Select.
Enhanced messages
Enhanced messaging is a Network Service. If your wireless service provider supports
this feature, enhanced messaging functions in the same manner as text messaging,
but it offers additional options for the style and content of the message.
While creating an enhanced message, the following options are available:
Add-ins—Select Sound, Animation, or Picture to add to the message.
Styles—Select Font type, Font size, or Text alignment of the message.
Note: If you try to send an enhanced message to a phone that does not
support enhanced messaging, the enhanced messaging content will be
stripped from the message, leaving only the text you have entered.
While viewing a received enhanced message, the following options are available:
Sound—Select Play sound or Save sound.
Picture—Select Save picture.
Animation—Select Save animation.
You can send messages that exceed 160 characters, which will be sent as a series
of two or more messages, also known as a linked message. In the navigation bar,
you can see the message length indicator counting backwards from 160. For
example, 10 (2) means that you can still add 10 characters for the text to be sent
as two messages.
Using special (Unicode) characters take up more space. If there are special
characters in your message, the indicator may not show the message length
correctly. Before the message is sent, the phone will tell you if the message exceeds
the maximum length allowed for one message. Cancel sending by pressing Cancel
or save the message in the inbox.
• MULTIMEDIA MESSAGES
A multimedia message (MMS) is a Network Service. If your wireless service provider
supports this feature, then the message can contain text, sound, and a picture. Your
phone supports multimedia messages that are up to 45 kB. If the maximum size is
exceeded, the phone may not be able to receive the message. Once you save the
multimedia message, you can use the image as a screen saver or the sound as a
ringing tone. In some networks, you may receive a message that includes an
internet address where you can view the multimedia message.
Note: Only devices that offer compatible multimedia message or e-mail
features can receive and display multimedia messages. Multimedia
message objects may contain viruses or otherwise be harmful to your
device or PC. Do not open any attachment if you are not sure of the
trustworthiness of the sender.
Note: When your phone is dedicated to a call in progress, an application
(such as a game), or an active web browser connection, the phone cannot
receive multimedia messages.
The default setting of the multimedia message service is generally on.
Multimedia messaging supports JPEG, GIF, PNG, OTA-BMP and WBMP picture
formats, and SP-MIDI and monophonic ringing tones.
The appearance of a multimedia message may vary depending on the receiving
device.
Copyright protections may prevent some images, ringing tones, and other content
from being copied, modified, transferred, or forwarded.
Write and send
1At the start screen, select Menu > Messages > Multimedia msgs. > Create
message and press Select.
2Enter the te xt of your message and press Options > Insert image or Insert