Microsoft NSD-1FW Users Guide

Download

Nokia 5170i

User Guide

(Phase 1 SW)

Keys

Earpiece

See p. 18.

Current function of Navi™ key

Navi™ key

See p. 8.

C key

See p. 9.

Voice mail key

See p. 47.

Power key

See p. 8.

Retractable antenna

See p. 17.

Screen

Scroll keys

See p. 9.

Number keys

See p. 13.

Emergency 9 key

See p. 31.

Case key

See p. 13.

Para obtener un manual del usuario en español favor de llamar o enviar un fax al teléfono 1-888-NOKIA2U (1-888-665-4228), fax 813-287-6612.

Table of Contents

1. Safety At A Glance . . . . . . . . . . . . . . . . . . . . . . .5

2. Getting Connected . . . . . . . . . . . . . . . . . . . . . . .7

Attaching your battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Charging your new battery. . . . . . . . . . . . . . . . . . . . . . . . . . .7

Removing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Important Battery Information. . . . . . . . . . . . . . . . . . . . . . .10

Cool Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

3. Using Your Phone . . . . . . . . . . . . . . . . . . . . . . .12

What is the ‘start screen’? . . . . . . . . . . . . . . . . . . . . . . . . . .12

Navigating tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Scrolling through the main menu . . . . . . . . . . . . . . . . . . . .13

Menu & submenu numbering. . . . . . . . . . . . . . . . . . . . . . . .14

Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Help Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Summary of Menu Items. . . . . . . . . . . . . . . . . . . . . . . . . . . .15

4. The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Switching the phone on and off. . . . . . . . . . . . . . . . . . . . . .18

Getting a strong signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Ending a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Keyguard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

5. Your Phone A to Z. . . . . . . . . . . . . . . . . . . . . . .22

ABC/abc mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Access codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

All calls timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Anykey answer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Automatic answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Automatic redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Call forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Call log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Call restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Call settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Call timers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Calling card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Change lock code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Change security code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Clear call lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Clear timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Conference call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Current call timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Customize profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Custom Tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Data and fax calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Dialed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Earpiece volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Emergency calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Entering text and numbers . . . . . . . . . . . . . . . . . . . . . . . . . 41

Erase all (text messages). . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Erase options for your phone book. . . . . . . . . . . . . . . . . . . 44

Fax calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Inbox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

In-call menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Keyguard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Keypad tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Last call timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Last number redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Letter case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Life timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Listen to voice messages. . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Manual touch tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Memory status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Message alert tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

NAM selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

NAM update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Network feature setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

One-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Paging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Phone book. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Phone lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Received calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Restore factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Renaming profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Restrict calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Ringing options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Ringing tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Ringing volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Saved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Scrolling view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Security settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Security code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Send own caller ID with next call . . . . . . . . . . . . . . . . . . . .68

Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Storing a name & number . . . . . . . . . . . . . . . . . . . . . . . . . .69

Synchronization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

System Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Text messages & paging . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Receiving text messages. . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Touch tone length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Touch tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Unlocked phone number. . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Vibrating alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Voice mailbox number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Warning and game tones . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Welcome note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

6. Data and Fax Calls . . . . . . . . . . . . . . . . . . . . . .83

Getting started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Configuring your data or fax software. . . . . . . . . . . . . . . . 84

To start a data or fax call . . . . . . . . . . . . . . . . . . . . . . . . . . 84

To receive a data or fax call . . . . . . . . . . . . . . . . . . . . . . . . 85

Manual selection of incoming data/fax calls. . . . . . . . . . . 85

7. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Chargers & Other Accessories. . . . . . . . . . . . . . . . . . . . . . . 89

8. Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . .92

9. Reference Information. . . . . . . . . . . . . . . . . . . .93

10. Technical Data . . . . . . . . . . . . . . . . . . . . . . . . .98

11. Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

12. Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

1. Safety At A Glance

Read these simple guidelines before using your phone. Failure to comply with these guidelines may be dangerous or illegal.

Note:For more detailed safety information, “Important Safety Information” on page93.

Road Safety Comes First

Don’t use a hand-held phone while driving; park the vehicle first.

Switch Off In Hospitals

Switch off your phone when near medical equipment. Follow any regulations or rules in force.

Switch Off On Aircraft

Mobile phones can cause interference. Using them on aircraft is illegal.

Switch Off When Refueling

Do not use the phone at a refueling point. Do not use near fuels or chemicals.

Switch Off Near Blasting

Do not use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules in force.

Interference

All mobile phones may get interference which could affect performance.

Use Sensibly

Use only in the normal position (to ear). Avoid unnecessary contact with the antenna when phone is on.

Qualified Service

Only qualified service personnel may install or repair cellular phone equipment.

Accessories and Batteries

Use only approved accessories and batteries. Do not connect incompatible products.

FCC/Industry Canada Notice

Your phone may cause TV or radio interference (e.g. when using a telephone in close proximity to receiving equipment). The FCC/ Industry Canada can require you to stop using your telephone if such interference can not be eliminated. If you require assistance, contact your local service facility.

This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Using this Guide

The wireless phone described in this guide is approved for use in CDMA/AMPS networks.

A number of features included in this guide are called Network Services. They are special services provided by wireless service providers. Before you can take advantage of any of these Network Services, you must subscribe to the service(s) from your home service provider and obtain instructions for their use.

Disclaimer

It’s possible that you may not be able to activate your phone on all wireless systems. Please see your service provider for details.

2. Getting Connected

This section will help you understand the ins and outs of charging and using your battery.

Attaching your battery

Simply place the battery in the grooves on the back of your phone. Then slide the battery upward until it clicks.

Note: Use only those batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer.

Note: See “Important Battery Information” on page10.

Charging your new battery

Your phone can be used with either a rechargeable Li-Ion or NiMH battery. Note that a new battery’s full performance is achieved only after two or three complete charge and discharge cycles.

With your phone powered on or off, connect the lead from the charger to the bottom of your phone. You can also place your phone on the charging stand (with the stand connected to a standard 120V AC outlet via either the ACP-7U or ACP-9U AC/DC adaptors).

When the battery begins charging, your phone will beep once and the battery strength indicator on the right side of the display will begin to scroll after a few seconds.

If your phone displays Not charging, charging is suspended. Check that the battery is connected only to an approved charging device. If the battery is very hot or cold, wait for a while; charging will automatically resume after the battery is restored to its normal operating temperature. If charging still fails, contact your dealer.

When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life.

Important: If left unused, a fully charged battery will discharge itself over time.

When is a good time to charge?

Actually, you can charge anytime. If you have a NiMH battery, you should allow it to completely discharge once in a while.

When your phone beeps once and displays Battery low, you only have a couple of minutes of talk time remaining. The repetition rate of these battery-low warnings depend on the remaining battery capacity and the battery condition. These warnings are more frequent when you’re in a call.

Note: The phone will not give you the warning tone under certain conditions. See “Warning and game tones” on page81.

Once all the power has drained from your battery, you’ll hear three beeps with the message Recharge battery on your display. At this point, your phone will switch itself off and you’ll need to recharge your battery.

When is charging complete?

When the charge indicators stop scrolling, your phone is considered fully charged. However, a slight increase in charge may occur if your phone is left connected to the charger for a couple more hours. This is called “trickle charge” or “maintenance charge.”

Charging times depend on the type of battery and charger used.

Note: For approximate charging and operating times, see “Batteries” on page87.

Can you make calls while charging?

Yes, you can. But your battery may not charge while a call is in progress (depending on which charger you are using). Charging should resume once you end the call.

See "Chargers & Other Accessories" on page 89 for more information.

Discharging NiMH batteries

A NiMH battery lasts longer and performs better if you fully discharge it from time to time. To discharge the battery, leave your phone switched on until the battery is drained. The phone will display several messages that the battery is low and that you need to recharge it; just ignore them.

You can also use the battery discharge feature of any approved accessory available for your phone. Do not attempt to discharge the battery by any means other than those just described.

Removing the battery

Note: Switch off the phone before removing the battery!

1. Press and hold the

button at the top of the battery.

2. Slide the battery

toward the bottom of the phone.

3. Lift the battery off

the phone.

Important Battery Information

• The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.

• Use only batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life. If left unused a fully charged battery will discharge itself over time.

• (NiMH batteries only) For optimal operation, discharge the battery from time to time by leaving your phone switched on until it turns itself off. You can also use the battery discharge feature of any approved accessory available for your phone. Do not attempt to discharge the battery by any other means.

• Temperature extremes will affect the ability of your battery to charge: allow it to cool down or warm up first.

• Use the battery only for its intended purpose.

• Never use any charger or battery which is damaged or worn out.

• Do not short circuit the battery. Accidental short circuiting can occur when a metallic object (coin, clip, or pen) causes direct connection of the + and - terminals of the battery (metal strips on the back of the battery), for example when you carry a spare battery in your pocket or purse. Short circuiting the terminals may damage the battery or the connecting object.

• Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 59º F and 77º F (15º C and 25º C). A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. NiMH batteries’ performance is particularly limited in temperatures below 14º F (-10º C). Li-Ion batteries’ performance is particularly limited in temperatures below 32º F (0º C).

• Do not dispose of batteries in a fire!

• Dispose of used batteries in accordance with any local regulations.

Cool Features

All the features in your phone are cool. It’s just that some are cooler than others!

For example, did you know that you can lock the keys on your phone to prevent accidental key presses and phone calls? Or that you can call someone with the touch of a single button? You can also stop your phone from ringing without even answering the call.

These are just some of the many Cool Features you’ll find in your phone. Look for the icon throughout this owner’s manual to find them.

3. Using Your Phone

The first few days you have your phone, play with it to learn how the menu and submenu system works. The more you learn how to access these menus and submenus, the more fun you’ll have with your phone.

This section describes the different methods of using your phone menus and submenus.

What is the ‘start screen’?

The start screen appears when you first turn your phone on, in its idle state.

Anytime you want to get to the start screen, press , except during a call (unless you want to hang up).

CAUTION: If you press when the phone is requesting input (for example, a setting, phone number, name, etc.), the phone displays the start screen, the input is not saved, and the option is not selected.

Navigating tools

Softkeys

Your phone has two softkeys that appear below the display. Their current function is indicated by the words appearing above them. Simply press the corresponding key under the choice you wish to select.

This illustration shows the phone at the start screen. The start screen always displays Menu on the left and Names on the right. Menu allows you to access your phone’s menus and submenus. Names allows you to access your phone book.

Note: See “Using Shortcuts” on page14 and “Phone book” on page56.

Scroll key

Your phone has a scroll key located just below your display. It has two arrows on it that look like s and t. Press the scroll key up or down to navigate through your phone’s menus and submenus. You can also use it to scroll through names and numbers in your phone book.

Also, when editing names and numbers (e.g. numbers in your phone book), you may notice a cursor flashing within the name or number. Pressing the scroll key up or down moves the cursor within the text, allowing you to insert letters, numbers, or special characters via the keypad.

Note: See “Entering text and numbers” on page41 for more details.

Scroll bar

When you access your phone’s menu and submenus, you will notice a scroll bar at the far right of the screen. This bar indicates where you are in the menu structure; each “tab” on the bar represents a different menu item.

For example, press Menu once. The scroll bar appears with the first (top) tab displayed. A different tab appears each time you press the t or s key to move up and down through the menu structure. The scroll bar works the same way with submenus.

Scrolling through the main menu

Press Menu at the start screen. Then press t or s to reach the desired menu item.

Press Select, Options or OK (whichever appears) to enter submenus and to choose options.

Press Exit or Quit to exit the present menu or Back to go back one level.

Tip: Pressing the key returns you to the Start screen.

Menu & submenu numbering

When you scroll to a menu or submenu, the menu number and/or submenu number appears on the display above the scroll bar. If you become familiar with these numbers, you can use them as shortcuts for accessing different menus.

For example, when you scroll to Menu 2 (Call log) the number 2 appears in the top right-hand corner of the display. If you scroll to menu 4 (Settings), submenu 3 (Security settings), your phone will display 4-3 in the top right-hand corner.

Note: See “Summary of Menu Items” on page15 for a list of your phone’s features along with their menu locations.

Note: Also, see “Using Shortcuts” on page14.

Using Shortcuts

Now that you know about shortcuts, use them as a quick and easy way to access a menu without having to scroll through other menus.

Press Menu, then menu number, then submenu number. For example, press Menu, then 2, then 2 again to access the dialed calls feature (Menu 2-2).

Press the menu and submenu numbers within a couple of seconds of each other when using this method.

Note: For a summary of your phone’s menu structure, see “Summary of Menu Items” on page15.

Help Text

If you’re not sure how a feature works, wait just a few seconds and help text will automatically appear for most of your phone’s features. Press More to see the next page of the text or Back to exit the help text. After a while, the help text will disappear by itself.

Summary of Menu Items

1 Messages

1-1 Text Messages

1-1-1 Inbox 1-1-2 Saved 1-1-3 Erase all

1-1-3-1 All read 1-1-3-2 All in inbox 1-1-3-3 All saved

1-2 Voice messages

1-2-1 Listen to voice messages 1-2-2 Voice mailbox number

1-3 Welcome note

2 Call log

2-1 Missed calls 2-2 Received calls 2-3 Dialed calls 2-4 Clear call lists

2-4-1 All 2-4-2 Missed 2-4-3 Dialed 2-4-4 Received

2-5 Call timers

2-5-1 Last call 2-5-2 All calls 2-5-3 Life timer 2-5-4 Clear timers

3 Profiles

3-1 Normal (the following options appear in all profiles)

3-1-1 Select 3-1-2 Customize

3-1-2-1 Ringing options 3-1-2-2 Ringing volume 3-1-2-3 Ringing tone 3-1-2-4 Vibrating alert 3-1-2-5 Keypad tones 3-1-2-6 Warning and game tones 3-1-2-7 Message alert tone 3-1-2-8 Lights (appears only in Car) 3-1-2-9 Automatic answer

3-1-3 Rename (not available in Normal, Car, or Headset)

3-2 Silent

(appears only in Car and Headset)

3-3 Meeting 3-4 Outdoor 3-5 Pager 3-6 Car (appears only after phone is connected to a car kit once) 3-7 Headset (appears only after connected to a headset once)

4 Settings

4-1 Call settings

4-1-1 Emergency key 9 4-1-2 Automatic redial 4-1-3 Calling card 4-1-4 Anykey answer

4-2 Phone settings

4-2-1 Clock 4-2-2 Alarm clock 4-2-3 Touch tones 4-2-4 Restore factory settings 4-2-5 Language

4-3 Security settings

4-3-1 Restrict calls 4-3-2 Access codes

4-4 Network services

4-4-1 Call forwarding * 4-4-2 Call waiting * 4-4-3 Send own caller ID with next call * 4-4-4 Network feature setting 4-4-5 NAM selection 4-4-6 NAM update (not available in some systems)

Note: * These items will not appear in your phone until they are activated with Network feature setting. See “Network feature setting” on page53 for details.

5 System

5-1 System search selection

5-1-1 Automatic 5-1-2 SemiAuto A (will not appear in some systems) 5-1-3 SemiAuto B (will not appear in some systems) 5-1-4 Home area

5-2 Digital/analog selection

5-2-1 Digit. & analog 5-2-2 Analog 5-2-3 Digital

The system menu may also appear as follows:

5-1 Automatic 5-2 Home 5-3 Analog (will not appear in some systems)

6 Games

6-1 Memory 6-2 Snake 6-3 Logic 6-4 Dice

7 Calculator 8 Calendar 9 Keyguard

4. The Basics

You have purchased a powerful phone, with lots of features. Read this section for some very basic information on how to use your phone.

A more comprehensive description of your phone is covered in “Your Phone A to Z” starting on page22.

Switching the phone on and off

Press and hold the key for two seconds to switch the phone on or off.

Switching off with the key

Quickly press the key (Switch off! will appear, highlighted) then press OK.

Note: TIPS ON EFFICIENT OPERATION: As with any other radio transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.

Note: WARNING! Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

Note: See “Safety At A Glance” on page5 for more information.

Getting a strong signal

Your phone operates on radio waves, and the quality of radio reception depends on the strength of the radio signal in your area. This radio coverage is maintained by a wireless network and the quality of calls on a wireless phone depends on the strength of the wireless radio signal.

If your phone does not detect service at power up, the message Searching for service will be displayed. The phone will continue to search for available service for 15 minutes, at which time it will display No service if none is found.

Note: The phone will not work in analog mode while searching for digital service.

Checking signal strength

When at the start screen (see page 14) or in a call, the strength of the radio signal is indicated by the signal indicators on the left side of your phone’s display. These indicators will move up as the strength of the signal increases and down as it decreases.

Increasing your phone’s signal may be easy. Try moving your phone slightly, or move towards a window if you’re calling from inside a building.

Making a call

Your cellular phone does not have a dial tone. Simply enter the phone number (including area code, as needed) and press

Note: NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder.

Editing a number on display

If you make a mistake while entering a number to dial, press s to move the cursor to the left and t to move it to the right. Press Clear to delete the character to the left of the cursor.

Dialing a phone number stored in the phone book

View stored names and numbers by pressing t or s from the start screen (see page12), then press

Calling card calls

Note: See “Calling card” on page32.

Emergency calls

Note: See “Emergency calls” on page40.

Ending a call

Press

Answering a call

Press any key except or

Note: If Keyguard is on (see next paragraph), only answers calls.

Tip: You can stop your phone from ringing without answering the call. Press when the phone rings to mute the ringing.

You can still answer the call if Call or the name of the person who is calling is still flashing on your display.

If you don't wish to answer the call, it will be forwarded to your voice mailbox (provided you have a voice mail subscription).

Keyguard

This feature helps to prevent accidental key presses (e.g. when

your phone is in your pocket, in your

purse) by disabling your keypad. If any keys are pressed while

Keyguard is activated, Press Unlock and then * will display.

Activating Keyguard

There are three different ways to activate Keyguard. Keys locked will appear on the display when activated.

• Press and hold until Keys locked appears

(not available during an active call)

• Press Menu

• Press Menu 9 at the start screen

Deactivating Keyguard

There are two different ways to deactivate Keyguard.

• Press Unlock, then

• Press and hold until Unlock keys? appears, then press OK

Answering a call with Keyguard active

Only the key will answer the call. After you end the call, Keyguard automatically becomes active again.

Some notes about Keyguard

• Calls may be possible to the emergency number pro-

grammed into your phone (e.g. 911 or other official emergency number). The number is displayed only after you have keyed in its last digit. Press ) to initiate the call.

• The Emergency key 9 will not work with Keyguard enabled.

• You must deactivate Keyguard prior to turning off your phone.

• Pressing the key quickly turns lights on for 15 seconds.

• Keyguard is automatically turned off when the phone is connected to a car kit. Keyguard is automatically reenabled when removed from a car kit.

Ending a Call

Press

Note: To clear any characters from the display, press again.

5. Your Phone A to Z

ABC/abc mode

This allows you to enter upper and lower case alphanumeric characters into your phone. This is necessary for entering names and numbers into your phone book, as well as editing any existing alphanumeric characters.

Note: See “Entering text and numbers” on page41 for more information.

Access codes

This is a security feature that allows you access to certain phone features.

Note: See “Lock code” on page49 and “Security code” on page67.

Alarm clock

The alarm clock uses your phone’s clock and can be set in advance to sound an alert at a designated time.

You can also turn your phone off after you’ve set the alarm. Your phone will automatically wake up and sound the alarm at the specified time.

The volume for the alarm clock is determined by the current ringing volume.

Note: If you have selected the Silent or Meeting profile, your alarm will only beep once. The best profile to use while using the alarm clock is Normal or Outdoor, unless these have been modified from their original settings or renamed.

Note: For more information on profiles, see page60. Also, see “Clock” on page35 for information on your phone’s clock.

Setting the alarm clock

1. Press Menu 4-2-2 (Settings - Phone settings -

Alarm clock)

2. Enter time you wish to set alarm (e.g. enter 07:00 to

set the alarm to 7:00; remember if your clock is 24-hour or am/pm). Existing digits will be replaced with the new alarm time.

3. Press OK

Note: Step 4 appears only if you have selected am/pm format; see “Selecting time format” on page36 for more information.

4. Select either am or pm and press OK

When the alarm goes off

Press Stop to shut off the alarm.

Snoozing

Press Snooze

The alarm will go off again in 10 minutes. If you let the phone alarm for 1 minute without pressing a key, it stops alarming for 10 minutes then starts again.

If you turn off the phone

If you turn off the phone and the alarm is set, the phone switches itself on at alarm time, then the alarm sounds.

To shut off the alarm, press any key except Snooze. The phone displays Keep the phone on? Press Yes to keep it on or No to switch it off.

Note: If you do not make a selection after 1 minute, the phone will automatically shut itself off.

If you press Snooze, the phone turns itself off for 10 minutes, then back on to sound the alarm.

REMEMBER! Do not switch on the phone when wireless phone use is prohibited, or when it may cause interference or danger.

Turning the alarm clock off

Press Menu 4-2-2 (Settings - Phone settings - Alarm clock), then scroll to Off and press OK.

All calls timer

This feature keeps track of the approximate time you

have spent on all calls with your phone.

Note: See “Call timers” on page30.

Anykey answer

This feature allows you to answer an incoming call by pressing any key except or , The default setting for this feature is On. Use the Call settings menu (Menu 4-1-4) to enable or disable Anykey answer.

Automatic answer

This is a setting found in your phone’s profile settings, under the Car and Headset profiles (see page60). When this feature is turned on, your phone answers incoming voice calls after one ring.

Note: Car and Headset profiles will not appear in your phone until you have connected an approved handsfree car kit or a headset to your phone at least once.

Activating automatic answer

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use t to highlight

either the Car or Headset profile and press Options.

Note: Car and Headset will not appear in the list unless the phone has already been connected to a car kit or headset.

3. Highlight Customize and press OK. Scroll to

Automatic answer, then press Select again.

4. Press t to On and press OK.

Note: This feature will not function with data calls.

Automatic redial

This feature attempts to redial numbers that are busy due to the wireless network. It will not redial numbers to a busy party.

Your phone will redial the number you’re trying to call up to 3 times after you hear a quick, busy signal. Press Quit

or to stop the call attempts.

Activating automatic redial

Press Menu 4-1-2 (Settings - Call settings - Automatic redial), then press t or s to On and press OK

Calculator

Your phone’s calculator adds, subtracts, multiplies, and divides.

Note: Remember! Your phone must be switched on to use this feature. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

Using the calculator

1. Press Menu 7 (Calculator)

2. With the screen that contains a “0”, enter the first

number in the calculation (press # for decimal point)

3. To add, press ∗ (+ appears)

To subtract, press ∗∗ (- appears) To multiply, press ∗∗∗ (* appears) To divide, press ∗∗∗∗ ( / appears) To insert a decimal, press the # key

4. Enter the second number

Repeat these steps as needed. If you need to erase any mistakes, press Clear to clear one number at a time.

5. Press Options. With Equals highlighted, press OK

Note: You can also choose Add, Subtract, Multiply, and

Divide from the list of options.

Calendar

The calendar helps you keep track of appointments, birthdays or meetings. It can even sound an alarm when it’s time for you to make a call or go to a meeting.

Note: Remember! Your phone must be switched on to use this feature. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

Note: Your phone must remain on to use the calendar’s alarm feature. If your phone is off, the alarm will not sound at its scheduled time.

Using the calendar

1. Press Menu 8 (Calendar)

2. If you are not in a digital network, you will be

prompted to set your phone’s time and date When your phone prompts you for the time with

hh:mm, enter the time in hours and minutes (using two-digit fields), then press OK

Note: Time format (24-hour or am/pm) is set using the Clock. See “Clock” on page35.

When your phone prompts you for the date with mm/dd/yyyy, enter the month and day (using twodigit fields) and year (using a four-digit field), then press OK.

Tip: Use t to move the cursor right and s to move it left. When you enter a digit, it writes over the number to the right of the cursor.

3. Your phone now displays the current day. You can

also scroll to different days by pressing t or s.

4. Once you’re at the date you want, press Options.

Then use t to highlight the option you want, and press Select. The options are:

Option 1: View day

With this option, you can view the notes of the day currently on display.

Use t to scroll through the notes. Each note allows you to choose the following Options:

Erase clears the note from your calendar.

Edit gives you the same prompts you got when you made the note.

Move gives you the date prompt so you can move the note to another date.

Option 2: Make note

With this option, you’ll need to choose Reminder, Call, Meeting, or Birthday. Your phone will prompt you for

more information depending on which one you choose. You can also set an alarm for any calendar note.

Note: See “Entering text and numbers” on page41 for help with entering information at the Subject: prompt.

Note: When the alarm goes off, you can press Postpone or OK. Press OK to shut off the alarm.

Option 3: Erase notes

With this option, you’ll need to choose which notes to erase. If you choose all the notes for the day currently on display (Of chosen day), or One by one (for all notes in the calendar), your phone presents each note to you with the option Erase or Back.

If you choose All at once, your phone will delete all calendar notes. When prompted to confirm the erase, press Yes or No.

Option 4: View all

This allows you to view the notes of the entire calendar. Use t or s to scroll through the notes. Calendar memory empty will appear if there are no notes in the calendar.

Option 5: Go to date

Enter the date you wish to go to.

Option 6: Set the date

Enter the day and month (using two-digit fields) and year (using a four-digit field), then press OK.

Note: This option is necessary only if network date and time is

not available. See"Clock" on page 35.

Call forwarding

This network service is used to forward incoming calls to another number so you won’t miss an important call. Check with your service provider for details.

Note: Before you can activate this feature, you should first store the feature code given to you by your service provider. Otherwise, this feature may not appear in the menu or function properly.

Note: However, you can use the feature code manually, if you choose, by including the feature code in front of the phone number to which you wish to forward your calls (e.g. *72 555 1212).

Note: See “Network feature setting” on page53 for more details. Note: If the code you store is not correct, the Call fowarding

feature will not work.

1. Press Menu 4-4-1 (Settings - Network services -

Call forwarding)

2. Scroll to desired call forwarding feature

(see options below)

3. Press Select

4. Highlight Activate and press OK

5. Enter phone number at Number: (or press Search to

locate number in phone book) and press OK

6. Your phone will attempt to call the network to

confirm the feature code you entered in Menu 4-4-4 (see “Network feature setting” on page53)

7. Once the feature code had been confirmed, the

feature is activated

Call forwarding options

Forward all calls forwards all incoming calls. Forward if busy forwards calls only when you’re on the

phone. Forward if not answered forwards calls if you don’t

answer.

Forward if out of reach forwards calls if you are out of the serving wireless network.

Cancel all call forwarding cancels all call forwarding options you have made active.

Call log

This feature automatically keeps track of numbers you’ve dialed, numbers that have called you, and the amount of time you’ve spent on calls.

Using call log

1. Press Menu 2 (Call log)

2. Press t to reach one of the following options, then press

Select or OK

2-1 Missed calls - See page51. 2-2 Received calls - See page62. 2-3 Dialed calls - See page39. 2-4 Clear call lists - See page34. 2-5 Call timers - See page30.

Tip: You can dial any of the phone numbers by pressing while the number is on the display.

Call log options

When you access Dialed calls, Received calls, or Missed calls and press Options, a list of options will appear.

Call time shows the date and time when the call was first connected (if clock has been set)

Use number allows you to view the number stored in the call log, save it in your phone book, or dial the number by pressing.

Save allows you to save the number into your phone book. Erase will erase the number from the call list.

Call restrictions

This feature allows you to restrict incoming and outgoing calls to and from certain numbers.

Note: See “Restrict calls” on page63 for details.

Call settings

This feature allows you to access and activate some of your phone’s features.

Using call settings

1. Press Menu 4-1 (Settings - Call settings)

2. Press t to reach one of the following options, then

press Select 4-1-1 Emergency key 9 - See page41. 4-1-2 Automatic redial - See page24. 4-1-3 Calling card - See page32.

Call timers

Your phone automatically keeps track of the approximate amount of time you’ve spent in calls.

1. Press Menu 2-5 (Call log -

Call timers)

2. Scroll repeatedly to access the following options

Last call displays call duration of last call.

Note: Current call timer can be accessed by pressing Details while using the Last call timer. See page38 for details.

All calls displays call duration of all calls made since timers have last been reset (see page35 for details on

how to clear call timers).

Life timer shows duration of all calls; this can not be reset (see page48).

Clear timers clears all call timers except the Life timer (see page35).

Call durations are for the currently-selected NAM (phone

number). Your phone has separate timers for each NAM your phone uses.

Note: The actual time invoiced for calls by your service provider may vary, depending upon items such as network features, rounding off for billing, and taxes.

Note: See “NAM selection” on page52 for details on NAM.

Call waiting

If you have subscribed to call waiting, your phone will beep during a call to let you know you have an incoming call. Your phone may also display the incoming caller’s identification

Note: See “Call forwarding” on page28 for details on caller ID.

Answering an incoming call with call waiting

Press

Swapping between two calls

Press

Ending the calls

Press to end both calls

Activating call waiting

You can also activate this feature with your phone; simply ask your service provider for the feature code, store it into your phone, then activate it.

Note: This feature may not appear in your phone’s menu or function properly until the feature code has been stored.

Note: See “Network feature setting” on page53 for more details.

1. Press Menu 4-4-2 (Settings - Network services -

Call waiting)

2. Press t to Activate (or select Cancel to cancel)

3. Press OK

4. Your phone will attempt to call the network to

confirm the feature code you entered in Menu 4-4-4

(see “Network feature setting” on page53)

5. Once the feature code has been confirmed, the feature is

activated.

Caller ID

This is a network service that helps identify incoming calls. Contact your service provider for details.

When Caller ID is active, your phone may display the caller’s phone number. The caller’s name may also display if their name and number has been stored in the phone book or if the wireless network supports it.

Call or Call-caller ID unavailable will display when the wireless network doesn’t recognize the calling number. Also, Call-caller ID blocked may display if the calling party has blocked caller ID.

Note: If you have stored a number more than once in your phone book, and that number is stored each time with a different name, then a name will not appear when someone calls from that number.

Note: See “Phone book” on page56 for details on your phone book.

Calling card

If you wish to use a calling card for long distance calls, you must first store your calling card information into your phone. Your phone can store up to four calling cards.

Storing a calling card

1. Press Menu 4-1-3 (Settings - Call settings - Calling

card)

2. Press t or s to desired calling card, press Options

3. Press t or s to Edit, press OK

4. Enter security code and press OK

Note: See “Security code” on page67 for details on your phone’s security code.

5. Press Select at the Dialing sequence prompt. Use the

following chart to determine the dialing sequence required by your long distance provider. Then press t or s to select the appropriate sequence for your card.

Press Select to confirm your choice.

If you use a

calling card from:*

MCI, AT&T True Choice, Sprint Canada, Unitel

networkMCI, WorldPhone MCI

GTE, PacBell, AT&T, Stentor

Note: *These calling cards are frequently used with these dialing sequences. However, they may vary and are subject to change at the phone company’s discretion.

Note: The order of the steps to follow may vary, depending on which dialing sequence your card uses.

6. Enter access number when prompted for the calling

You typically are required to:

Dial 1-800 access number, then phone number, then card number (+ PIN if required)

Dial 1-800 access number, then card number (+ PIN if required), then phone number

Dial the prefix (any numbers that must precede the phone number) and phone number you want to dial, then card number, (then PIN, if required)

Select this

dialing

sequence:

Access no. + phone no. + card no.

Access no. + card no. + phone no.

Prefix + phone no. + card no.

card’s access number (usually the 1-800 number listed on the back of the calling card), press OK

Note: You can also retrieve the access number from your phone book if it has already been stored. Simply press Search, then t or s to find the number.

7. Enter card number and/or PIN when prompted to

enter calling card number and personal identification number, then press OK. Press OK again at Save

changes?

8. Press t or s to display Card name and press Select.

Enter card name using your phone’s keypad, then press OK.

Note: See “Entering text and numbers” on page41 if you need help on entering the card name

Choosing a calling card to use

1. Press Menu 4-1-3 (Settings - Call settings - Calling

card)

2. Press t or s to desired card, press Options

3. Press t or s to highlight Select and press OK

4. Enter security code at Security code:, press OK

5. Your phone will display Card ready for use

Making calling card calls

Enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions.

Press and hold for a few seconds until your phone displays Card call.

When you see Wait for tone, then press OK, listen for the tone, then press OK. When you see Wait for tone, press OK again, listen for the tone, then press OK.

Note: This procedure may not apply to all calling card options programmed into your phone. Please look at the back of your calling card or contact your long distance company for more information.

Change lock code

This feature allows you to change your lock code.

Note: See “Changing your lock code” on page49.

Change security code

This feature allows you to change your security code.

Note: See “Changing your security code” on page68.

Clear call lists

This feature will clear all dialed numbers, as well as numbers of answered calls and missed calls. You can not undo this operation, so be careful.

Note: Also, see “Call log” on page29.

1. Press Menu 2-4 (Call log - Clear call lists)

2. Highlight either All, Missed, Dialed, or Received

and press OK (All will clear all call lists, while the others clear their respective call lists)

Note: When the Dialed calls list is cleared, it includes the shortcut to this list accessed when you press and use the s or

t keys.

Clear timers

This feature clears all call timers (except for the life timer) for the currently-selected NAM.

Note: See “Call timers” on page30 for more details.

1. Press Menu 2-5-4 (Call log - Call timers - Clear

timers)

2. Enter security code at Security code: and press OK

Note: Careful: Clearing call timers can not be undone. If you are using the call timers to log or track the amount of time you are using your phone, you may wish to record the call timers before you erase them.

Note: The life timer can not be reset. See “Life timer” on page48 for details.

Clock

Your phone contains a real-time clock that can be set two different ways: the clock can use the time and date information provided by the wireless system, or it can be set manually.

The clock will display the current time and date on the Start screen. You can also choose to hide the clock if you prefer. See "Displaying or hiding the clock" on page 37.”

Note: Your phone also features an alarm clock. See page22 for details.

By default, the clock gets it’s information from the

wireless network. If you wish to override the network clock, do the following:

Setting your own time

1. Press Menu 4-2-1 (Settings - Phone settings - Clock)

2. Scroll to Time settings, press Select

3. Scroll to Set clock, press Select again

4. Enter the current time, then press OK (time will

appear in hh:mm)

5. Enter the current date, then press OK (date will

appear in mm/dd/yyyy)

Selecting time format

If you choose am/pm format, you will notice a small indicator that appears to the right of the displayed time. If the indicator is at the top, it’s in am; if on the bottom, it’s in pm.

1. Press Menu 4-2-1 (Settings - Phone settings - Clock)

2. Press t to Time format and press Select

3. Press t to either 24-hour or am/pm

4. Press OK

If you wish to revert back to the wireless system’s time, do the following:

Setting the network clock

1. Press Menu 4-2-1 (Settings - Phone settings - Clock)

2. Scroll to Time settings, press Select

3. Observe the text: Set by network, press Select

again

If you choose Set by network, your phone will display Time is set.

Note: If you use the Set by network option while outside your digital network, you will be prompted to enter your own time (see above). Network time will replace the time and date you set

once you re-enter your digital network. Note: If your battery has been removed or has drained outside

the digital network, you will be prompted to enter your own time only if the battery is replaced or recharged while still outside of the digital network (see above).

Displaying or hiding the clock

1. Press Menu 4-2-1 (Settings - Phone settings - Clock)

2. Depending on the current settings, either Hide time/

day or Display time/day will be highlighted.

3. Press Select

Conference call

This feature allows you to add a third party to a call.

Note: This feature may not be available in all wireless systems. See your service provider for details and availability.

Making a conference call

1. While in a call, enter the second phone number and

press

Note: You can also make a third party call using the in-call menu. While in a call, press Options and scroll to New call. Enter the number you wish to call and then press OK.

2. Once the third party answers, press to connect

all three parties

3. Press again if you wish to disconnect the third

party. Press to drop both parties.

Recalling a number from the phone book during a conference call

1. During the call, press Options

2. Press t or s to Names and press OK

3. Press Select at Search

4. Enter name and press OK, or just press t or s to scroll

through the phone book

5. Press

Current call timer

This feature displays the running elapsed time on your screen while a call is active. Once the call has ended, simply press any key to clear the display (the display will also clear automatically after 10 seconds).

Note: Also, see “Call timers” on page30.

Activating the current call timer

Press Menu 2-5 (Call log - Call timers ) and press Details. With Current call timer displayed, press Select, scroll to On, and press OK

Note: As with all call timers, the actual time invoiced for calls by your service provider may vary, depending upon items such as network features, rounding off for billing, and taxes.

Customize profiles

This feature allows you to customize individual profiles.

Note: See “Profiles” on page60 for details.

Custom Tone

This feature allows you to assign special ringing tones to phone numbers already stored in your phone book. So when your phone rings, you’ll be able to quickly identify who’s calling.

Your phone will also display an icon to identify that this person is in the custom tones list. You can assign as many as 20 names & numbers to the list.

Keep in mind that caller ID must be available and active in your phone in order to use this feature.

Note: If you have selected the Silent profile, your phone will not ring when someone in your custom tone list calls.

Assigning a custom ringing tone to a name & number

1. In your phone book, locate the person you wish to

add to the custom tone list.

2. With that person’s name or number highlighted,

press Details and then Options

3. Scroll to Custom tones, then press Select

4. Scroll through the list of ringing tones that are dis-

played and press OK when you make your choice

Removing a name & number from the list

1. In your phone book, locate the person you wish to

remove from the custom tones list

2. With that person’s name or number highlighted,

press Details and then Options

3. Scroll to Custom tones, then press Select

4. Scroll to Default and press OK

Data and fax calls

Your phone can function as a fax/modem when connected to your PC or laptop computer via the optional data cable. You must also have the appropriate fax or data software installed and configured to send and receive data or faxes. (See "Data and Fax Calls" on page 83 for

more information).

Dialed calls

Your phone automatically stores the last 10 numbers you’ve dialed.

1. Press Menu 2-3 (Call log -

Dialed calls)

2. Press t or s

3. Press to dial the number you wish to call

You can also access the last 10 dialed numbers if you press

once, then press t or s to scroll through the list.

Note: Also, see “Call log” on page29 for details on other call lists.

Dialed calls options

Note: See “Call log options” on page29.

Earpiece volume

You can adjust the listening volume of your phone’s earpiece by pressing t or s to decrease or increase the volume.

Note: See “Volume” on page80 for details.

Emergency calls

1. If the phone is not on, switch it on

2. Key in the emergency number for your present loca-

tion (e.g. 911 or other official emergency number). Emergency numbers vary by location.

3. Press

IMPORTANT!

Note: This phone, like any cellular phone, operates using radio signals, cellular and landline networks, as well as userprogrammed functions which can not guarantee connection in all conditions. Therefore, you should never rely solely upon any cellular phone for essential communications (e.g., medical emergencies).

Note: Remember, to make or receive any calls, the phone must be switched on and in a service area with adequate cellular signal strength.

Note: Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use. Check with local cellular service providers.

Note: If certain features are in use (keyguard, restrict calls, etc.), you may first need to turn those features off before you can make an emergency call. Consult this document and your local cellular service provider.

Note: When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your cellular phone may be the only means of communication at the scene of an accident - do not cut off the call until given permission to do so.

Emergency key 9

With this feature on, the phone attempts to make an emergency call when you press 9, then . The phone dials the emergency number pre-programmed into your phone.

Note: You can also dial an emergency call by pressing and holding 9 until the phone indicates it is attempting to make an emergency call. However, this method does not work when Keyguard is active or when the phone is connected to a modem.

Note: This feature is disabled while playing games, using the calculator, or while editing (e.g. phone book entries, calendar, etc.).

Activating Emergency key 9

Press Menu 4-1-1 (Settings - Call settings - Emergency key 9), scroll to On to activate or Off to cancel, then press OK.

Entering text and numbers

You can enter text and/or numbers when storing information into your phone via your phone’s keypad. When you see the letter you wish to enter, simply press the key associated with that letter until it appears on the display (numbers also appear).

ABC mode

When you need to enter letters into your phone, it will automatically switch over to mode.

Your phone displays the icon to indicate that your phone is in ABC mode. It also displays when you are viewing names rather than numbers.

When is displayed, you can enter these characters:

Key Characters Key Characters

.,’?!-1 PQRS7

ABC2 TUV8 DEF3 WXYZ9 GHI4 Enters an empty space, 0 JKL5 (See below for details) MNO6 Changes letter case;

long press toggles between ABC/abc and 123 mode

While you’re editing a name, the s key will move the cursor to the left, and t will move it to the right. Press Clear to clear the character to the left of the cursor.

If you wish to enter an empty space between characters, press 0 for each space.

abc mode (Changing letter case)

Press the # key to switch between upper and lower case letters. The icon will switch to to indicate you are using lower case.

123 mode

When storing names to the phone book, you can enter a number within a name at any time. Simply press that particular number key a few times until it appears, or press and hold the key for the same result.

However, you can do this more quickly by accessing the

mode, without having to scroll through each letter

to access the number you wish to enter. Simply press the # key for about 2 seconds while in

mode and the icon will appear. While in this mode, only numbers can be entered. Letters can not be entered unless your phone is in mode.

Press the # key again for a couple of seconds if you wish

to deactivate the mode.

Special characters (for storing names)

When in mode (see page22), you can press the

key and a collection of special characters will appear. You can use these characters to help when storing names in your phone book. Simply press t or s to highlight the one you wish to use and press Insert.

. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ £ % / < > ¿ ¡ § = [ ] ¥ TIP: If you wish to access a special character that appears

toward the end of this list, press s for quicker access. Also, you can access the . , ‘ ? ! - characters quickly by

pressing the key while in mode.

Special Characters (for storing & calling numbers)

The following special characters are helpful when you store numbers to your phone book (see page56). Simply press the key once or repeatedly, and the following characters can be stored within the number sequence.

(p) creates a pause when a number is dialed; the digits located to the right of the “p” are automatically sent as touch tones after a 2.5 second pause (see page76).

(w) creates a “wait” when a number is dialed. The “w” makes your phone wait for you to press Send or

, then it sends the digits located to the right of

the “w” as touch tones (see page76).

You can add as many special characters as you need in a single number sequence.

Erase all (text messages)

You can erase all read text messages quickly and easily from the text messages menu (Menu 01-1).

Note: See “Erasing all text messages” on page74 for complete details.

Erase options for your phone book

Note: See “Erasing stored names & numbers” and “Erasing your entire phone book” on page59.

Fax calls

Note: Your phone can function as a fax/modem when

connected to your PC or laptop computer via the optional data cable. You must also have the appropriate fax software installed and configured to send and receive data or faxes. See

“Data and Fax Calls” on page83 for more information.

Games

You have four exciting games to choose from in your phone. Press Menu 6 to choose one of the following games:

Note: REMEMBER! Your phone must be switched on to use this function. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

Memory

Reveal pictures to find pairs in as few tries as possible. Move the cursor with the 2 (up), 4 (left), 6 (right), and 8 (down) keys.

Press the 5 key to reveal pictures. Press the # key to jump right over revealed pictures or move from bottom right to top left. Press the ∗ key to jump left over revealed pictures or move from top left to bottom right. Once found, pairs stay visible.

Snake

Feed the snake with as many goodies as possible and watch it grow. Use keys 2 (up), 4 (left), 6 (right), and 8 (down) to turn the snake toward food. The snake can only turn 90 degrees at a time.

The longer the snake’s tail grows, the higher the score. Using a higher level of difficulty increases the snake’s speed but also increases the point value for each goodie. If the snake hits its own tail or the surrounding wall, the game is over.

You can also try using keys 1 (up and left), 3 (up and right), 7 (down and left), and 9 (down and right) to control the snake’s direction.

Logic

Find a secret combination of figures. Available figures are shown at the top of the display before you accept the first guess row. Use the 2, 4 and 8 keys to move the cursor and the 5 key to select the figure.

To copy a figure from a previously accepted guess row, start scrolling with the 4 key, move the cursor to the desired figure in the normal way and accept the selection with the 5 key.

Once you think you have the right combination, press the * key. The result is presented as a set of marks over the row. A correct figure in the right place gives a full mark; a correct figure in the wrong place gives a half mark.

The game ends when all the figures are correct and in the right place.

Dice

Use this to play other games that require a set of dice if one isn’t available. Use the Level option to set the number of dice, up to six. You can roll, lock, and unlock each die as many times as you wish.

When you start a new game, the dice roll for a couple of seconds and then stop. Use the 4 (left) and 6 (right) keys to select a die. Press the 5 key to lock or unlock the selected die.

Press ∗ to roll the unlocked dice again.

Game options

When you select a game, you can choose from the following submenus:

Level allows you to choose the level of difficulty, except for Dice, which selects the number of dice you wish to play with.

New game starts a new game. Top score will display the selected game’s highest score

ever played with your phone (does not appear in Logic or Dice). Instructions will describe how the game is played.

Last view may appear when the game ends. Continue may appear in the options list if the game is

interrupted (e.g. an incoming call, or when you press

Inbox

When you receive a text message, it’s stored in the Inbox. Your phone will display Message received, along with the text message icon, and you will hear a tone (unless you are in a call). Press the Read softkey to read messages.

Note: Please see “Text messages & paging” on page73 for more details on this feature.

In-call menu

While you’re in a call, you may notice that Options appears on your display. Pressing this key will access you to the in-call menu, which allows you access to certain features while you have a call active.

When you access the in-call menu, you may notice the following choices:

Mute Allows you to mute the microphone; if your microphone is already muted, Mute will change to End

mute (see “Microphone” on page51) Touch tones Allows you to manually enter a touch tone

string or search for one in your phone book (see “Phone

book” on page56)

Menu Allows you access most all of your phone’s menu Names Allows you access to your phone book (see “Phone

book” on page56)

New call Allows you to place the call to the third party when making a conference call (see "Conference call" on

page 37)

Keyguard

This feature disables the keypad to protect against

accidental keypresses.

Note: See “Keyguard” on page20 for more details.

Keypad tones

This is one of the settings in your phone’s profiles (see

page60). It sets the volume of the tone you hear when you

press your phone’s keys. Note that if you choose the Silent profile, keypad tones

will be turned off.

Setting the keypad tones

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use t to highlight the

profile you want and press Options.

3. Highlight Customize and press OK. Press t to Keypad

tones and press Select

4. Press t to scroll through the options; your phone

plays a sample of each. Press OK for the one you want.

Language

Because many wireless phone customers speak English as a second language, your phone allows you to choose your phone’s displayed language.

Choosing a language for your phone

1. Press Menu 4-2-5 (Settings - Phone settings -

Language)

2. Use t or s to select the language you wish to use and

press OK

You can choose from English, French, Spanish, Portuguese, Hebrew, Chinese (simplified), or Chinese (traditional).

Last call timer

This feature displays the duration of your last call.

Note: See “Call timers” on page30.

Last number redial

When you want to call your last dialed number,

Press , then again

Note: You must be at the start screen before you press

Letter case

You can change from upper to lower case when entering letters into your phone.

Note: See “abc mode (Changing letter case)” on page42 for more details.

Life timer

The life timer displays the approximate total time of all calls dialed and received with your phone (in hours and minutes only). The life timer can not be reset and is used in conjunction with your phone’s warranty.

Press Menu 2-5-3 (Call log - Call timers - Life timer) to view your phone’s life timer.

Note: The actual time invoiced for calls by your service provider may vary, depending upon items such as network features, rounding off for billing, and taxes.

Note: Also, see “Call timers” on page30.

Lights

This is one of the settings in your phone’s Car profile (see

page60). This feature determines whether the lights are

on only when you use your phone, or if they are on at all times. This setting works only when your phone is connected to a car kit.

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use t to highlight the

profile you want and press Options.

Note: Car will not appear in the list until the phone has been connected to a car kit at least one time.

3. Highlight Customize and press OK. Press t to

highlight Lights and press Select.

4. Use t to scroll through your choices and press OK

If you select Automatic, your phone’s lights are turned off within fifteen seconds if no keys are pressed. If On is selected, then the lights will remain on the entire time your phone is connected to the car kit.

Listen to voice messages

This feature allows you to access your voice messages.

Note: See “Voice messages” on page79 for complete details.

Lock code

You’ll need the lock code to activate and deactivate Phone Lock (see page59), or to change your lock code. The default lock code is 1234. If you enter an incorrect lock code five times in a row, your phone will prompt you for the security code (see page67).

Changing your lock code

In a lock code, only numeric characters are accepted.

1. Enter Menu 4-3-2-3 (Settings - Security settings -

Access codes - Change lock code)

2. Enter lock code at Enter lock code: and press OK

3. Enter new lock code, press OK

4. Verify new lock code, press OK

Note: When you change your lock code, make sure you store it in a safe place, away from your phone. Avoid entering access codes similar to emergency numbers to prevent accidental emergency calls.

Manual touch tones

This setting determines how long touch tones are produced as you press the keys on the keypad. Note that touch tones are sometimes called DTMF tones.

Note: See “Touch tone length” on page76 for details.

Setting manual touch tones

Press Menu 4-2-3-1 (Settings - Phone settings - Touch tones - Manual touch tones) and highlight one of the following options, then press OK.

Continuous means the tone sounds for as long as you

press and hold the key. Fixed sets the tone length to .1 second, regardless of

how long you press the key. Off turns the tones off, and no tones will be sent when

you press the keys.

Memory status

This feature allows you to see how many free and in-use memory locations are in your directory.

Note: Also, see “Phone book” on page56.

Press Names, scroll to Options and press Select. Then scroll to Memory status and press Select again.

Messages

This feature allows you to access your voice and text messages, as well as composing your own welcome note.

Using messages

1. Press Menu 01 (Messages)

2. Press t to reach one of the following options, then press

Select

01-1 Text messages - See page73. 01-2 Voice messages - See page79.

01-3 Welcome note - See page81.

Message alert tone

This is one of the settings in your phone’s profiles (see

page60). It sets the tone that your phone makes when you

get a text message.

Note: Also, see “Text messages & paging” on page73.

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use t to highlight the

profile you want and press Options.

3. Highlight Customize and press OK. Press t to high-

light Message alert tone, then press Select.

4. Use t to scroll through your choices (your phone

plays samples) and press OK.

Microphone

You can mute and unmute your phone’s microphone while a call is in progress. During a call, your phone’s softkeys change from Names and Menu to Options and Mute.

Muting and unmuting your phone

You can mute the phone’s microphone during a call; simply press Mute. To unmute the microphone, press Unmute.

If these texts are not available, press Options, scroll to Mute or End mute and press Select.

Muting and unmuting also affect the microphones of any accessories connected to the phone.

Missed calls

If Caller ID is available, your phone will keep track of the last 10 calls you have missed if you weren’t around to answer the call. You can even find out what time they called.

Missed calls will appear in your phone only if it was turned on and in a service area when the call was missed.

If the display says ‘Missed call’

Press List. To call back the displayed number, press . Press Exit to go back to the start screen.

Note: Number will be displayed only if caller ID is available.

Missed call options

Note: See “Call log options” on page29.

Checking the missed calls list anytime

Press Menu 2-1 (Call log - Missed calls), then scroll through the list.

When the Forward if not answered option in the Call Forwarding feature (see page28) is selected, your phone will not treat the forwarded calls as missed calls.

Note: Also, see “Call log” on page29 for details on other call lists.

NAM selection

The Number Assignment Module (NAM) is the phone’s storage location containing the assigned phone number(s) and other system information. This information is entered by your service provider when programming your phone when your phone is first activated.

In most systems, your phone can be activated in up to 2 different service areas (e.g. one in Dallas and another in Chicago), each giving your phone a different phone number or account.

Only one number can be active at a time. When you select a phone number, you’re also selecting which system you’re using as your home system (see “System Selection” on

page70). The first phone number displayed with this menu

is the currently selected number.

Note: It may not be necessary to have two NAMs for your phone if your service provider has service or roaming agreements for each

area in which you wish to use your phone. Contact your service provider for details.

Selecting the NAM for your phone

1. Press Menu 4-4-5 (Settings - Network services - NAM

selection),

2. Use t or s to select the phone number you want to use

and press OK.

Note: You need at least one active number to make calls. You can not change from one NAM to another during a call.

NAM update

The Number Assignment Module (NAM) update feature may appear in your phone. It allows you to easily activate or reactivate your phone without having to go to your service provider.

In some cases, when you try to connect to your service provider, the following message may appear on the display before the call is initiated.

'Lock' prevents the service provider from changing the lock code. 'Unlock' allows the provider to change the code and restrict others from activating the phone.

If this happens, select the appropriate selection for your phone. If you don’t want your service provider to change your lock code, select Lock. If you want to allow your service provider to change your code to prevent other service providers from activating your phone, press Unlock.

If you wish to do neither and want to return to the start screen, press and hold .

Note: This feature may not be available in all systems. Please contact your service provider for details about the availability of this feature.

Network feature setting

Call forwarding (page28), Call waiting (page31) and Send own caller ID with next call (page68) are network services

available through your service provider or dealer. When you subscribe to any of these services, your service

provider or dealer gives you a separate feature code to activate each service. Deactivation codes are used to deactivate each service.

Once you store the appropriate code in your phone, the service appears as a menu item. You can then use the menu to activate and deactivate these services.

Note: These feature codes may already be stored in your phone by your service provider. Check with your service provider to confirm if these codes are already configured in your phone.

Note: If your phone has more than one phone number programmed, any feature codes stored will apply only to your primary phone number, or NAM 1.

Storing feature codes

1. Press Menu 4-4-4 (Settings - Network services -

Network feature setting)

2. At Feature code:, enter the feature code or deacti-

vation code received from your dealer (e.g. ∗74, ∗740, etc.), press OK

3. t to the service that the code applies to and press

Select

4. t to suboption, then Select (Repeat step as required,

based on number of suboptions)

(Use step four only for call forwarding options)

5. t to Activate or Cancel, then press OK

Network services

Some of the features in this menu are network services that require a subscription. See your service provider for details and availability.

4-4-1 Call forwarding * - See page28. 4-4-2 Call waiting * - See page31. 4-4-3 Send own caller ID with next call * -

See page68.

4-4-4 Network feature setting - See page53.

4-4-5 NAM selection - See page52. 4-4-6 NAM update - See page53.

Note: * These features will not appear in the menu unless they are activated using Network feature setting. See “Network feature setting” on page53 for details.

One-touch dialing

This feature allows you to make phone calls quickly and easily with the touch of a button.

You must store names and numbers in your phone book (see page57) before you can use this feature. Then you can assign a name from the phone book to a one-touch dial location using your phone’s keys 2 through 8.

Note: Keys 1 and 9 are used exclusively for dialing your voice mailbox (see page79) and for attempting emergency calls (see page95) to the emergency number programmed into your phone (e.g. 911 or other official emergency number). Press and hold either of these keys to initiate the appropriate call.

Note: Some service providers may also pre-program a third key for their use (e.g. Customer Serivce phone number).

Assigning one-touch dial locations

1. Press Names, scroll to 1-touch dialing and press

Select

2. Scroll to next available empty location, (empty) will

appear, then press Assign

3. Scroll to select desired name and press Select

4. Repeat as necessary

Calling a number using one-touch dialing

Press and hold the key (2 through 8) for a few seconds to call the number in the corresponding one-touch dial location. You can also press the key and then if you prefer.

Your phone recalls the phone number from the memory, displays it briefly, then dials it.

Changing numbers in one-touch dial list

With this feature, you can assign a different number to any one-touch dial location.

1. Press Names, scroll to 1-touch dialing and press

Select

2. Scroll to the location you wish to change and press

Options

3. Scroll to Change, then press Select

4. Scroll through phone book to select new number

and press Select

Erasing one-touch dial locations

1. Press Names, scroll to 1-touch dialing and press

Select

2. Scroll to the location you wish to erase and press

Options

3. Scroll to Erase, press Select, then press OK at

Erase?

Paging

You can receive pages with your phone.

Note: See “Text messages & paging” on page73.

Phone book

You can store up to 200 numbers and associated names in your phone’s memory. These numbers are right at your fingertips for easy dialing.

Things to know about the phone book:

Stored numbers may be up to 32 digits long. Stored names may be up to 16 characters long. You can not store identical names into your phone

(e.g., John, John); make sure you use unique names in your phone book (e.g., John H., John W.). If you

try to use a name that already exists, Replace? will be displayed, followed by the currently stored name. Press OK to replace the existing entry or Back to return to the previous screen.

Accessing the phone book

Press Names, scroll to desired submenu and press Select.

About the submenus

The phone book has several submenus from which you can choose.

Search allows you to search for a specific name. Add new allows you to enter new names and numbers. Options lets you choose your scrolling view, as well as to

show memory status. 1-touch dialing allows you to assign up to seven one-

touch dial locations (see page54 for details). Erase all lets you erase every name and number in your

phone book. You can erase one name and number at a time by pressing Details, then Options when viewing a name already in the phone book.

Own Number displays your own phone number.

Storing a name & number

1. Press Names

2. Scroll to Add new and press

Select

3. Enter name using the keypad

(use # to switch between upper and lower case) and press OK

You can also press the key to insert any special characters (see page43 for a list of special characters)

4. Enter phone number and press OK

Note: Also, see “Entering text and numbers” on page41 and “Quick save” on page69.

Changing a number stored with a name

1. Recall stored name, then press Details to view

number

2. Press Options, scroll to Edit and press Select

3. Press OK while name is displayed, unless you wish to

change it. If so, press and hold Clear, re-enter name and press OK

4. Press and hold Clear to erase number or use the t

and s keys to edit

5. Enter new number

6. Press OK to save new number

Recalling names & numbers

At the start screen, press t or s to view names in directory. Then scroll to the person you wish to call and press to dial the number (phone will display number dialed to confirm).

Recalling numbers by name

At the start screen, press t or s (or just press Names). Then press the number on the keypad with the corresponding first letter of the name you wish to call. Keep pressing to get to the next letter on that key.

You can also recall numbers by name by pressing Names, then press Select at Search. Enter the name of the person you wish to recall and press OK.

Note: If you only entered the first letter of the name and there are several names beginning with the same letter, press t or s until the desired name appears.

Erasing stored names & numbers

1. Recall stored name

2. Press Details, then press Options

3. Highlight Erase, then press Select, then OK

Note: You can not undo Erase functions, so be careful!

Erasing your entire phone book

1. Press Names

2. Scroll to Erase all and press Select

3. Press OK at Are you sure?

4. Enter security code at Security code:

5. Press OK

Note: Warning: This feature will erase your entire phone book, which can not be undone!

Phone lock

This feature protects your phone from unauthorized outgoing calls or unauthorized access to information stored in the phone.

With phone lock activated, Phone locked will be displayed each time you turn your phone on or off. You will be prompted for your lock code when you press either Names or Menu (Call not allowed will be displayed if you attempt to place a call while phone is locked). Once your lock code has been accepted, your phone will function normally.

Activating and deactivating phone lock

Press Menu 4-3-2-1 (Settings - Security settings Access codes - Phone lock). Enter the lock code then

press OK. Then scroll to On or Off, and press OK. Complete the phone lock activation or deactivation by turning your phone off and back on.

When your phone is locked, calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency number) including calls with Emergency key 9 (page41).

You can also store a number in the Unlocked phone number location, which allows you to call this number even though your phone is locked (See page78 for details).

Answering a call with phone lock on

Press any key except and

Phone settings

Phone settings allows you access to other phone features such as an alarm clock and your phone’s language.

Using phone settings

Press Menu 4-2 (Settings - Phone settings), then scroll to one of the following options, then press Select:

4-2-1 Clock - See page35. 4-2-2 Alarm clock - See page53. 4-2-3 Touch tones - See page76. 4-2-4 Restore factory settings - See page62. 4-2-5 Language - See page47.

Profiles

You can adjust and customize your phone to whatever environment you find yourself in (e.g. shopping, a movie, etc.). Each profile uses its predefined settings to determine your phone’s ringing volume, ringing tone, message alert tone, keypad tones, warning tones, etc., for a number of different environments.

These settings can be changed at any time, and each profile can be selected in a matter of seconds.

Note: Restore factory settings (see page62) will reset any changes made in profiles back to the factory defaults. The default setting is Normal.

Accessing profiles

Press Menu 3

Selecting a profile

Quickly press the key to view a list of the available profiles. Then press t or s to choose another profile and press OK.

When you select a profile other than Normal, it will appear on the start screen.

This only allows you to select a profile; you can not customize them here. Keep reading to learn how to customize a profile.

Customizing profiles and other options

Press Menu 3 (Profiles) and scroll to desired profile, then press Options.

Once Options is selected, Select, Customize and Rename may appear as your choices. Once you have selected and highlighted one of these items, press OK. If you wish to go back to the main menu, press Back.

Select activates the profile. Customize allows you to customize a profile by

changing its settings. When you reach one of the following settings within a profile, press Select. Once you make your choice within that setting, press OK.

• Ringing options

• Ringing volume

• Ringing tone

• Vibrating alert

• Keypad tones

• Warning and game tones

• Message alert tone

• Lights (appears only in Car)

• Automatic answer (appears only in Car and Headset)

Rename allows you to rename certain profiles.

Note: Car and Headset will not appear in the profiles list unless

your phone has been connected to a car kit or a headset. However, they will remain in the menu once connected for the first time.

Note: When you change a setting in any profile, it only affects that profile and will not change your phone’s normal settings.

Renaming profiles

1. Press Menu 3 (Profiles)

2. Scroll to desired profile, then press Options

3. Scroll to Rename and press OK

4. Enter new name and press OK again

Note: Normal, Car, and Headset profiles can not be renamed.

Received calls

If Caller ID is available, this feature shows you the phone numbers of the 10 most recent calls you’ve answered.

Press Menu 2-4 (Call log - Received calls), then t to scroll the numbers.

Note: Also, see “Call log” on page29 for details on other call lists.

Received calls options

See “Call log options” on page29.

Restore factory settings

You can reset the settings of many of your phone’s features to factory defaults (as in a new phone).

Restoring factory settings

Press Menu 4-2-4 (Settings - Phone settings - Restore factory settings), enter security code and press OK.

Note: Your phone book, timers, language selection, security code and lock codes are not reset. However, any profiles you have modified will reset when you restore your settings. Plus, if you are using your phone’s clock [versus using the network provided clock] it will reset as well.

Renaming profiles

See “Profiles” on page60.

Restrict calls

This feature allows you to restrict incoming and outgoing calls. Outgoing and incoming calls are restricted from a list of restrictions that you create yourself.

Restricting incoming & outgoing calls

Upon selecting Restrict outgoing calls or Restrict incoming calls from the menu, you are presented with 2

options: Select allows you to select call restrictions from the

outgoing calls list. Add restriction allows you to create your own list of

outgoing call restrictions. Once you have accessed Add restriction and have added

at least one restriction, the following options will be added to the menu for that option:

Edit allows you to edit an existing outgoing call restriction. Erase will erase any existing outgoing call restrictions.

Note: When calls are restricted, calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency numbers). However, Emergency key 9 may not operate depending on the type of restriction you choose.

Adding outgoing & incoming call restrictions

You can add up to 10 restrictions for outgoing calls, and 15 for incoming calls. The maximum number of characters you can enter for each restriction is 15.

1. Press Menu 4-3-1 (Settings - Security settings -

Restrict calls)

2. Scroll to Restrict outgoing calls or Restrict

incoming calls and press Select

3. Enter the security code and press OK

Note: The message “Caller ID must be available” will display prior to creating an incoming call restriction.

4. Press t or s to Add restriction to create an outgoing

or incoming call restriction and press OK

5. Enter the number string you wish to restrict and

press OK, for example: If you wish to restrict all calls that begin with 1,

enter 1 If you wish to restrict all calls that begin with 1972,

enter 1972 If you wish to restrict all calls that begin with 214,

enter 214

6. If you wish to enter a name for the call restriction,

enter the name using your phone’s keypad, then press OK. If a name is not entered, the number that is restricted will appear in place of the name.

Note: When creating a new restriction, that restriction is automatically selected (enabled) at the time it is saved.

Selecting call restrictions

1. Press Menu 4-3-1 (Settings - Security settings -

Restrict calls)

2. Scroll to Restrict outgoing calls or Restrict

incoming calls and press Select

3. Enter the security code and press OK

4. Scroll to Select and press OK

5. Scroll to each restriction you wish to use and press

Mark; press Unmark to deactivate existing restrictions

6. Press Back and then press Yes at Save changes?

Editing call restrictions

1. Press Menu 4-3-1 (Settings - Security settings -

Restrict calls)

2. Scroll to Restrict outgoing calls or Restrict

incoming calls and press Select

3. Enter the security code and press OK

4. Scroll to Edit and press OK

5. Scroll to the restriction you wish to edit, press OK

Note: If no name has been entered for a restriction, the restricted number will be displayed.

6. Press and hold Clear to erase entire number, then

enter the new characters. Or use t or s to move the cursor to the desired location and delete a character or insert additional characters. Press OK when finished.

7. Edit name if desired using same procedure as above

Erasing call restrictions

1. Press Menu 4-3-1 (Settings - Security settings -

Restrict calls)

2. Scroll to Restrict outgoing calls or Restrict

incoming calls and press Select

3. Enter the security code and press OK

4. Scroll to Erase and press OK

5. Scroll to the restriction you wish to erase, press OK

6. Press OK again to erase restriction

Note: The All calls option cannot be erased and therefore does not appear in the list of restrictions to be deleted.

Ringing options

This is one of the settings in your phone’s profiles (see

page60). It allows you to choose whether or not your

phone rings, beeps, or remains silent when someone calls you. This feature does not affect incoming text message alert tones or incoming data/fax calls (see page73).

Selecting ringing options

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use t to highlight the profile

you want and press Options.

3. Highlight Customize and press OK. Press t to Ringing

options, then press Select.

4. Highlight either Ring, Ascending, Ring once, Beep once

or Silent and press OK

Note: The Ascending ringing option plays the selected ringing tone at a low volume, then gradually increases in intensity with each ring.

Ringing tone

This is one of the settings in your phone’s profiles (see page60). It allows you to choose one of the many ringing tones your phone uses for incoming voice calls.

If you set Ringing Options (see page64) to Silent or Beep once, ringing tones are automatically disabled; however, incoming calls can still be received.

Selecting ringing tones

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use t to highlight the profile

you want and press Options.

3. Highlight Customize and press OK. Press t to Ringing

tone, then press Select.

4. Press t to scroll through the options. After you hear the

tone you wish to use, press OK.

Ringing volume

This feature, which is found within your phone’s profile settings, allows you to adjust your phone’s ringing volume.

Note: See “Volume” on page80 for details.

Saved

This is where saved text messages are stored.

Note: See “Text messages & paging” on page73 for details.

Scrolling view

You have three different options on how you can view the phone book. Your choices are:

Name list shows all stored names in a scrolling list. Three names will appear at any given time. To view other names in the directory, scroll back and forth through the list using t or s. Name list is the default setting.

Name+number displays individual names and numbers stored in your directory. Only one name will display on your screen at a time, with the corresponding phone number. Use t or s to view other names.

Name only shows individual names only on a full screen display. To view other names, use t or s. You can view the corresponding phone number by pressing Details, then t or s.

Selecting your scrolling view

1. Press Names

2. Scroll to Options, then press Select

3. Press Select at Scrolling view

4. Press t or s to select either Name list, Name+num-

ber, or Name only, then press OK

Security settings

This menu includes the following security features:

4-3-1 Restrict calls - See page63. 4-3-2 Access codes - See page22.

The Access codes submenu includes Phone lock (page59), Unlocked phone number (page78), Change lock code (page49), and Change security code (page68).

Security code

Your phone will prompt you for a five digit security code for certain features. These features can be used only after the correct security code has been successfully entered.

Note: When entering your security code, ***** will appear on the display to keep others from viewing your code.

If you make a mistake entering the code, erase the last entered digit by pressing Clear (or press and hold Clear to delete all the digits on your display). Then enter the correct code or press Back to exit the current feature.

If you enter an incorrect security code (Code error will appear) five times in a row, your phone won’t accept any entries for the next five minutes.

Your phone’s default security code is 12345. It’s highly recommended that you change this code at once, write it down, and store it in a safe place away from your phone.

Changing your security code

1. Press Menu 4-3-2-4 (Settings - Security settings -

Access codes - Change security code)

2. Enter security code and press OK

3. Enter new security code at Enter new security

code:, press OK (must be five digits)

4. Enter new security code again at Verify new

security code:, press OK

5. Phone will display Security code changed

Note: If you have changed your security code and don’t remember the new code, contact your service provider. Once you have changed your security code, the default setting is no longer valid.

Send own caller ID with next call

In most service areas, when you call someone your name will be presented to his/her caller ID (if they subscribe). This feature allows you to block their caller ID (your number will not be displayed) when you call them. This feature works on a per-call basis. Contact your service provider for more details.

Note: Please be aware of the following:

• This feature is only effective when calling to a number that is equipped with Caller ID.

• This feature is available only when supported by the wireless network, and may not function if you are roaming.

Note: Before you can activate this feature, you should first store the feature code given to you by your service provider. Otherwise, this feature may not appear in the menu or function properly. Check with your service provider to confirm if the feature code has been pre-programmed for you. See “Network feature setting” on page53 for more details.

1. Press Menu 4-4-3 (Settings - Network services -

Send own caller ID with next call)

2. Highlight Yes (to show your number) or No (to not

show it) and press OK

3. Enter the number you wish to call (or press Search

to retrieve the number from the phone book and press OK), then press OK

4. Your phone will attempt to call this number with the

feature code you stored in Menu 4-4-4 (see “Network

feature setting” on page53)

Settings

This main menu allows you access to other features. See these individual entries for more information.

4-1 Call settings - See page30. 4-2 Phone settings - See page60. 4-3 Security settings - See page67. 4-4 Network services - See page54.

Storing a name & number

You can save names and numbers in the Phone book. Either use the method described in “Storing a name & number” on page57 or the “quick save” method described below.

Quick save

Enter the phone number and press Save. Enter a name at Name: if you wish (optional), then press OK.

Note: To save the number without entering a name, press and hold Save for 2 seconds. The number will appear at the end of your phone book list.

Note: Also, see “Entering text and numbers” on page41.

Synchronization

Your phone supports synchronization of its phone book with many popular Personal Information Manager (PIM) programs (e.g. Lotus Organizer, Microsoft Outlook, Symantic ACT!) by using 3rd party software.

Synchronization of contacts and phone numbers between your phone and PC will also require the optional DAU-9P serial cable. Check with your local Nokia dealer for the availability of these products.

System Selection

Note: The options available in the System selection menu may vary between service providers.

The System menu (Menu-5) allows you to modify how your phone will work when you are outside of your primary or “home” system. How your phone will handle being out of your home area can significantly affect the types and amounts of additional charges you may incur.

Service Types

In each wireless service area there are usually two service providers, referred to as type A and type B.

When you first set up your wireless service account, your service provider will inform you of which system you will be using (e.g. type A). This is your home system. The other system (e.g. type B) is known as a non home-type system.

Roaming

Roaming is a term used to indicate that your phone is not in its home area. When you place or receive calls while roaming, you are actually using another service provider’s system to complete your call. Therefore, calls made or

received while roaming are usually more expensive than calls made in your home area.

Roaming indicators

When your phone begins roaming, it displays Roaming. If roaming in a non-preferred system, your phone will also display Roaming and a D will appear at the top of the display.

System choices

Your phone will automatically attempt calls using a preferred system. If your phone fails to find a preferred system, then it will use the selection you have chosen with this feature.

Note: Before making modifications to your system selection setup, contact your service provider to ascertain how these changes may affect your phone bill.

Automatic means your phone will attempt calls to a hometype system before trying to use a non home-type system.

SemiAuto A means your phone will attempt calls to system A unless a home or preferred system is available.

Note: This text may not appear in some systems.

SemiAuto B means your phone will attempt calls to system B unless a home or preferred system is available.

Note: This text may not appear in some systems.

Home area means your phone cannot roam at all. Your phone will display No Service when you travel outside of your home area.

Custom menu

Depending on your service provider, the options displayed for the System menu may include the following:

Automatic means your phone will attempt calls to a hometype system before trying to use a non home-type system.

[Service Provider’s Name] means your phone will attempt calls via your service provider’s system only. If your service provider’s system is unavailable, your phone will display No service.

Digital/analog allows you to tell your phone to select the available digital or analog network automatically, or you can manually choose a digital or analog network .

Which system should you choose?

By default, your phone is set to automatically search for the most cost-effective system when you are outside of your home area. For example, if your home system is type A and you are roaming, your phone will automatically try to use the local hometype system (the type A system in your current location). The type B system would be a non home-type system.

However, in an area where no home or preferred systems are available, use this menu to manually choose which system your phone uses.

By setting your phone to use a home-type or a preferred system, it’s possible for you to receive discounted roaming charges. Check with your service provider to maximize use of this feature.

In non-preferred systems, normal roaming charges are determined by the host system. Your phone is designed to select a system most favorable to you concerning the cost of the call and reception quality.

Note: When roaming in some systems, you may need to have a roaming agreement in order to place a call. If no roaming agreement has been arranged, a network operator may interrupt and request information on how you intend to pay for the call.

Note: Powering the phone off & back on again will reset any manual overrides for analog or non-preferred systems.

If you have more than one phone number

The currently-selected NAM in your phone determines which system is your current home system.

Note: See “NAM selection” on page52 for more details.

Text messages & paging

When you subscribe to the text messaging network service, you can receive text messages and pages with your phone. See your service provider for details and availability.

Text message options

Inbox is where incoming messages are received and stored. All new, unread messages are kept here.

Saved is where all saved, read messages are kept. Erase all allows you to erase All read, All in inbox, or All

saved messages. See “Erasing all text messages” on

page74.

Receiving text messages

The maximum length of a received text message is about 250 characters. Your phone has space to receive up to 30 text messages, depending on the length of each one.

Note: Also, the maximum length of a text message may depend on the network’s capabilities. See your service provider for additional text messaging information.

When you receive a text message

Text messages are shown in the order that they were received, in their order of priority.

New emergency message indicates that the message or page received was sent by someone via the service provider. Emergency messages are sent only in situations where life and/or property are in immediate danger. Emergency messages are listed first and will override all other messages.

Urgent messages are also high priority messages, although emergency messages have higher priority.

Message received indicates the existence of an unread

message or page. If more than one message exists, the number of received messages will be displayed, followed by the messages or pages in the order they were received.

Reading text messages

With Message received displayed,

1. Press Read and scroll to new message

2. Press Read again

Reading options

Press Options while a text message is displayed to access the following reading options.

Erase will erase the message. Save will save the message to the Saved folder. Use number captures the telephone number displayed in

the incoming text message, permitting you to either save the number in your phone book (see “Phone book” on

page56), or place a call to the number (see “Calling someone back” on page75).

Erasing a text message

1. With the message on the display, press Options

2. Scroll to Erase and press OK

3. Press OK again at Erase message?

Erasing all text messages

1. Press Menu 01-1-5 (Messages - Text messages -

Erase all)

2. Scroll to the desired option:

All read will erase all messages that have been read

from both the Inbox and Saved folder. All in inbox will erase only those messages in your

Inbox that have been read. All saved will erase messages in the Saved folder.

3. Enter your security code and press OK

Receiving a page

Your phone will display Message received. The message will display Call:, followed by the name or number of the person who paged you. Names will appear only if that person has been stored in the phone book.

Calling someone back

The message along with the phone number must be visible on your phone’s screen. While the text message is displayed,

1. Press Options

2. Select Use number, then press OK

To quickly call back a number in a message

Press while the message (including the phone number) is displayed. After the number has been displayed on the screen for 3 seconds, the call will be placed.

Note: If more than one number is on the display, the numbers are displayed in a list. Simply select the phone number you want to call and press . If no numbers are found, your phone will display No number found.

When your phone’s memory is full

When you have an incoming text message and your phone’s memory is full, one or more messages, of lowest priority, will automatically be deleted in order to receive the new text message.

If the message memory is still full, your phone will display No space: read messages. You can clear this notification by pressing OK.

Note: Messages are usually deleted from your Inbox. An incoming emergency message may delete messages from your Saved folder.

Touch tone length

This feature determines the length of each touch tone when they are sent automatically.

Short sets the tone length to .1 second. Long sets the tone length to .5 second.

You can set the touch tone length by pressing Menu 4 2 3 2 (Settings - Phone settings - Touch tones - Touch

tone length).

Touch tones

Your phone can generate various sounds, called touch tones, when the keys are pressed. These are also known as DTMF tones.

Touch tones can be used for many automated, over-thephone services such as checking bank balances, airline arrival and departure times, and using voice mailbox options. Touch tones can be sent only during an active voice call.

Storing touch tone strings

Store touch tone strings the same way you store phone numbers (see page57).

You can store a whole digit sequence in your phone book and send it as touch tones for frequently-used strings of numbers.

Sending a touch tone string

Make sure Menu 4-2-3-1 (Settings - Phone settings Touch tones - Manual touch tones) is not set to Off.

During a call,

1. Press Options

2. Scroll to Touch tones and press OK

3. Enter touch tone string or recall string from the

phone book and press OK

Note: Use caution when sending confidential information over

the air when using DTMF tones in analog mode.

Storing touch tone strings with phone numbers

1. Enter the phone number (e.g. your office voice mailbox)

2. Press ∗∗∗ (p) or ∗∗∗∗ (w)

3. Enter the touch tone string (e.g. voice mailbox password)

4. Store the number as you normally would

Note: See “Special Characters (for storing & calling numbers)” on page43 for details on “p” and “w” characters.

When you dial this number, your phone first dials the phone number, then waits (because of the “w” character) for you to press Send. Your phone then sends your password.

If you include a “p” character instead of a “w”, your phone pauses for 2.5 seconds, then automatically sends your password as touch tones.

Linking phone numbers with touch tone strings

This feature allows you to store a phone number in one phone book location and link it to another phone book location that contains a touch tone string.

First, you must store the touch tone string into a phone book location and then assign it a one-touch dialing location (see

“One-touch dialing” on page55).

1. Enter the phone number you wish to link with the touch

tone string.

2. Press * twice (you should have a + character next to the

phone number.

3. Enter the one-touch dialing location where the touch

tone string is stored (e.g. if the string is stored in location 2, then enter 2)

4. Press Save and then enter the name that corresponds

with the phone number (this is optional)

5. Press OK

When you wish to call this number, make the call as you normally would. Then, when you wish to send the touch tone

string, simply press OK.

Unlocked phone number

When the phone lock is on, no calls can be made. But if you store a number in the unlocked phone number location, you can make a call to that number while the phone is locked.

Note: See “Phone lock” on page59 for details on phone lock.

Storing the unlocked phone number

1. Press Menu 4-3-2-2 (Settings - Security settings -

Access codes - Unlocked phone number)

2. Enter lock code and press OK

3. Enter phone number at Number: (or press Search

and scroll through the phone book)

4. Press OK

Note: Saving a number to a location with an existing entry will overwrite that entry with the new information.

Calling the unlocked phone number

Note: Your phone must be locked via the phone lock to use this feature.

At the start screen, press t or s once, then or you can manually enter the phone number as it is stored and press .

Vibrating alert

This is one of the settings in your phone’s profiles (see

page60). Your phone has an internal vibrating feature, so

you can set your phone to vibrate when you receive a voice call.

Activating vibrating alert

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use t to highlight the

profile you want and press Options.

3. Highlight Customize and press OK. Press t to reach

Vibrating alert, then press Select.

4. Use t to highlight On or Off and press OK. If you choose

On, your phone will vibrate even if you have set Ringing options (see page64) to Silent.

Note: The vibrating alert does not work when your phone is connected to any charger or car kit. Also, if you have chosen the Ring once option for the profile you’re using, the vibrating alert will only vibrate once when your phone rings.

Voice mailbox number

This number dials your voice mailbox.

Note: See “Voice messages” in next section.

Voice messages

Voice mail is a network service that may require a subscription from your service provider.

Once everything is set up for your voice mailbox (see below), your phone will notify you when you receive a voice message.

New voice message will appear on the display along with the

icon, and you’ll hear a short beep. Your phone will display the number of voice messages if you’ve received more than one.

Setting up your voice mailbox

Before you can retrieve any voice messages, you need to store your voice mailbox number. Your service provider usually gives this number to you.

When you’re ready to store your voice mailbox number, press

Menu 01-2-2 (Messages - Voice messages - Voice mailbox number). Then enter your voice mailbox phone number and

press OK. This number can be up to 32 digits long and is used until it’s changed. So if your phone number changes, you may need to change your voice mailbox number along with it.

Note: Some service providers automatically pre-program this number into your phone. You will only be able to view (and not change) this number.

Greetings, passwords, and prompts

These may vary in different wireless systems. So if you need information about how to record your greeting or how to store your password, contact your service provider. You’ll also need to contact them on how to listen to voice messages once you’re connected to your voice mailbox.

Listening to your voice messages

If New voice message is displayed, just press Listen and follow the prompts. If you’d rather listen to your messages later, press Exit.

You can listen to messages anytime if you press and hold the 1 key (or press 1, then ). Calling voice mailbox will appear on the display. Or if you prefer, you can access your voice mailbox by pressing Menu 01-2-1 (Messages -

Voice messages - Listen to voice messages).

Volume

You can adjust the ringing volume and earpiece volume with your phone.

Earpiece volume

While in a phone call, you can adjust the listening volume for your phone’s earpiece. The top scroll key increases while the bottom one decreases the volume.

If an accessory like a headset or a car kit, or one with its own loudspeaker, is connected to your phone, the scroll keys will adjust the volume for that accessory.

Note: Using the scroll keys to adjust earpiece volume functions only during phone calls.

Ringing volume

This is one of the settings in your phone’s profiles (see page60). It sets the default ringing volume for incoming voice calls and message alert tones.

Setting the ringing volume

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use t to highlight the

profile you want and press Options.

3. Highlight Customize and press OK. Press t to

Ringing volume, then press Select.

4. Press t to scroll through the options. When you hear

the volume level you wish to use, press OK.

Warning and game tones

This is one of the settings in your phone’s profiles (see

page60). Warning and game tones include those sounds

your phone makes for conditions such as errors, confirmations, power on, battery low, and recharge battery, or sounds made during game play.

Turning warning tones on and off

1. Press Menu 3 (Profiles)

2. Your phone lists each profile. Use t to highlight the

profile you want and press Options.

3. Highlight Customize and press OK. Press t to

Warning and game tones, then press Select.

4. Use t to highlight On or Off and press OK

Welcome note

You can program a welcome note into your phone to display a message when you first turn it on (e.g. hello, your name, a reminder, etc.). The maximum length is 36 characters.

1. Press Menu 01-3 (Messages - Welcome note)

2. Enter new message or edit an existing one

3. Press Options

4. Press t to Save or Erase and press OK

The welcome note displays each time your phone is switched on. Characters you enter are added to the left of the cursor. Press Clear to delete characters to the left of the cursor. Press t or s to move the cursor right or left.

Note: See “Entering text and numbers” on page41 for details.

6. Data and Fax Calls

Your phone can function as a fax/modem when connected to your PC or laptop computer via the optional DLR-3 Data Cable (available through your local Nokia dealer). You must also have the appropriate fax or data software installed and configured to send and receive data or faxes through your phone.

Can I receive a data or fax call while a voice call is in progress?

Yes. Your phone will display either Data call or Fax call, depending on the type of incoming call. If no cable is connected, the phone will display Fax call, connect data cable or Data call, connect data cable. If you have Caller ID, the caller’s name or number will also be displayed.

You must first terminate the voice call, then launch the appropriate data or fax software and allow the software to accept the incoming call.

Can I receive other calls while a data or fax call is in progress?

No. The caller will receive a busy signal.

Can I place a voice call while a data or fax call is in progress?

No. If a voice call is attempted while a data or fax call is in progress, the phone will display End data call? Terminate the data or fax call from your computer’s software, or press Back to return to the data or fax call in progress.

Getting started

Make sure your phone is connected to your computer via the optional DLR-3 Data Cable and your computer recognizes the new hardware.

See the installation and configuration instructions supplied with the DLR-3 cable for more information.

Configuring your data or fax software

Once properly connected and configured, your PC will recognize your phone as an external fax/modem. However, your fax or data software may already be configured to use the existing PCMCIA or internal modem.

Before you can use your phone to send and receive data or faxes, you must reconfigure your fax or data software so that it uses your phone rather than your existing modem. You may consider creating a separate set of dialing properties to use when your phone is connected, rather than changing any existing settings.

Please refer to the documentation or online help files for your data or fax application when creating new dialing configurations, or modifying existing settings.

To start a data or fax call

Note: The restrict calls feature may affect any data/fax calls you attempt. If you experience problems, check your call restrictions. See page63 for details.

1. Initiate a data or fax call using your data or fax

software configured for your phone.

2. When trying to connect to the network, the phone

displays Connecting... Once connected, the text Data call (or Fax call) remains on the display for the

duration of the data or fax call.

3. Terminate the data call from your data software; fax

calls typically terminate automatically.

Note: Avoid terminating a call by pressing your phone’s key. This may cause your data or fax application to temporarily lock up and could cause loss of data.

Note: Data or fax calls cannot be initiated using your phone’s keypad. All data and fax calls must be initiated using the data or fax software.

Note: Any touch tones (DTMF tones) needed for calling cards, special long-distance access numbers, etc. must be programmed into the dialing string.

To receive a data or fax call

Your phone must be connected to your PC via the data cable.

1. The appropriate data or fax software must be run-

ning. Consider setting your data or fax software to automatically answer incoming calls so you can receive them while away from your PC.

2. Your phone will display either Data call or Fax call,

depending on the type of incoming call.

3. Terminate the data call from your data software; fax

calls typically terminate automatically.

Note: Avoid terminating a call by pressing your phone’s key. This may cause your data or fax application to temporarily lock up and could cause loss of data.

Manual selection of incoming data/fax calls

Certain service providers require that you preset your phone to receive the incoming data or fax call, rather than having the phone automatically detect the call type.

Note: Check with your service provider to see if “prearrangement” of data and/or fax calls is necessary.

Most popular data and fax programs allow you to send additional initialization commands to the modem when the program is launched, or when the modem is instructed to receive a call. You will need to modify your phone’s modem configuration in the data or fax software so that it sends the following special initialization string to the modem:

To preset your phone to receive a data call:

AT+CSP=1

To preset your phone to receive a fax call:

AT+CSP=2

You should only have to make this modification once; these settings typically are saved as a part of your data or fax program’s settings. Please refer to the documentation or online help files for your data or fax application when modifying your modem’s initialization string.

When the software has sent the proper command to your phone, the phone will display Ready for data reception or Ready for fax reception momentarily, along with either a d or f status indicator at the start screen.

Once your phone is preset for either data or fax reception, you cannot receive incoming voice calls. You must either remove the data cable or turn the phone’s power off and back on to restore normal voice call reception.

7. Accessories

If you want to enhance your phone’s functionality, an extensive range of accessories is available for you. You can select any of these items to help accommodate your specific communication needs. For availability of these and other accessories, contact your service provider.

A few practical rules for accessory operation:

Keep all accessories out of reach of small children. When you disconnect the power cord of any acces-

sory, grasp and pull the plug, not the cord. Check regularly that any vehicle-installed acces-

sories are mounted and are operating properly. Installation of any complex car accessories must be

made by qualified personnel only.

Note: Use only batteries, chargers and accessories approved by the phone manufacturer for use with this particular phone model. The use of any other types may invalidate any approval or warranty applying to the phone, and may be dangerous.

Note: See page10 for important battery usage information. Note: For availability of approved accessories, please check with

your authorized Nokia dealer.

Batteries

The following table shows battery options that are available for your phone, charging times with the Rapid Travel Charger (ACP-9U) and the Standard Travel Charger (ACP-7U), talk times, and standby times. Consult your service provider for more information.

Charging Times

Battery Option

BLS-2 Extended Battery Li-Ion 900 mAh 4 hrs 2 hrs

BMS-2S Extended Battery NiMH 900 mAh 4 hrs 1 hr 30 min

BLS-4 Ultra Extended Battery Li-Ion 1500 mAh

ACP-7U Charger

5 hrs 3 hrs 30 min

ACP-9U Charger

Note: The times displayed above are approximate and will allow your battery to obtain approximately 80% of its capacity. At this time, the battery scroll bars on your phone’s display will stop scrolling. If you wish to obtain 100% battery capacity, please allow another two hours to “trickle” or “maintenance” charge.

Standby and Talk Times

Battery Option

BLS-2 Extended

Battery Li-Ion

900 mAh

BMS-2S Extended

Battery NiMH

900 mAh

BLS-4 Ultra

Extended Battery

Li-Ion

1500 mAh

Digital

Talk Time

2 hrs to

2 hrs 55 min

2 hrs to

2 hrs 55 min

3 hrs 20 min to

4 hrs 50 min

Analog

Talk Time

40 min to

1 hr 25 min

40 min to

1 hr 25 min

1 hr 10 min to

2 hrs 25 min

Standby Time

70 to 110 hrs (dig)

10 to 15 hrs (ana)

70 to 110 hrs (dig)

10 to 15 hrs (ana)

115 to 180 hrs (dig)

15 to 23 hrs (ana)

Note: The times shown are approximate. Battery operation times vary according to signal conditions, network parameters set by the service provider, and how you use your phone.

Note: Dispose of used batteries in accordance with any local regulations.

Chargers & Other Accessories

The following chargers and other accessories are available for your phone; please see your dealer for details. Also, refer to the accessories brochure that was included in your sales package for the entire line of Nokia Original Accessories.

Standard Travel Charger (ACP-7U)

This lightweight (187g) and durable AC charger can be used with all battery options.

To use the Standard Travel Charger, plug it into a wall outlet and connect the lead from the charger to the base of your phone. The charger can also be used together with the Compact Desktop Charging Stand (DCH-8).

Rapid Travel Charger (ACP-9U)

This lightweight (100g) AC charger can be used with all battery options. Calls can be made during charging, even with a fully discharged battery.

To use the Rapid Travel Charger (ACP-9U), plug it into a standard 120V AC wall outlet, and connect the lead from the charger to the base of your phone.

The charger can also be used together with the optional Compact Desktop Charging Stand (DCH-8). Approximate charging times for discharged batteries are shown at the beginning of this section.

Rapid Cigarette Lighter Charger (LCH-9)

You can charge your phone’s battery from your vehicle battery by using the Rapid Cigarette Lighter Charger (LCH-9).

Calls are possible during charging. A green light indicates the charger is ready for charging (when not charging) or finished charging (if it has been charging). The battery charging times are the same as those for the Rapid Travel Charger (ACP-9U)

The input voltage range is from 11 to 32V DC, negative grounding. Avoid prolonged charging with the Rapid Cigarette Lighter Charger (LCH-9) when the car engine is not running; this may cause the battery of your car to drain. Note also that in some cars the cigarette lighter plug is not provided with electricity if the ignition is not switched on.

Compact Desktop Charging Stand (DCH-8)

Used together with the Standard Travel Charger (ACP-7U) or the Rapid Travel Charger (ACP-9U), the Compact Desktop Charging Stand (DCH-8) is an economical choice when you need your phone close at hand.

With the battery still attached, place your phone in the charging stand to begin charging your phone’s battery.

Charging is indicated by the scrolling battery bars on the right side of your phone’s display. When the scrolling stops, the battery is approximately 80% charged.

To get a fully charged battery, leave your phone in the charging stand for a couple of hours after the scrolling stops.

The following table contains information on battery charging times when using the DCH-9 charging stand:

DCH-9 Rear Slot Charging Times

Using ACP-7U Using ACP-9U

Back

Both

Battery option

slot

only

slots

full

Back

slot

only

BLS-2 Extended Li-Ion 900 mAh

BMS-2S Extended

6.5 hrs.

9.75 hrs.

4 hrs.

NiMH 900 mAh BLS-4 Ultra Extended

Li-Ion 1500 mAh

12 hrs. 18 hrs. 8 hrs. 12 hrs.

Both slots

full

6.25 hrs.

8. Troubleshooting

What if charging fails?

If your phone displays Not charging, charging is suspended. Make sure the battery is connected to an approved charging device and that the battery is at room temperature. Extreme temperatures, hot or cold, can affect your battery’s performance and prevent charging.

If charging still fails, disconnect the charger from your phone. Then reconnect the charger to your phone and retry. If you still experience charging problems, contact your dealer and, if necessary, bring your phone in to have it serviced. Don’t forget your battery and charger!

No service

If you’re outside the wireless service area, No service will display on your phone. No calls can be made or received, including emergency calls.

What if the call doesn’t go through?

Your phone can make and receive calls only when it’s switched on and in the wireless network’s service area. No service means that you’re probably outside the wireless service area. No calls can be made or received.

See “Checking signal strength” on page19.

Check call restrictions means calls to the phone number you tried to call are restricted (see “Restrict calls” on

page63), or your phone is locked (see “Phone lock” on page59).

Note: Check with your service provider for information about when you need to dial a ‘1’ and/or an area code in addition to the number.

If you make a mistake dialing

Press Clear to delete the last character entered, or press and hold Clear to delete all characters entered.

9. Reference Information

Important Safety Information

Traffic Safety

Do not use a hand-held telephone while driving a vehicle. If using a hand-held phone park the vehicle before conversing. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop.

The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.

Remember, road safety always comes first!

Operating Environment

Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.

When connecting the phone or any accessory to another device, read its user’s guide for detailed safety instructions. Do not connect incompatible products.

As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).

Electronic Devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 6 inches (20 cm.) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers:

• Should always keep the phone more than 6 inches (20 cm) from their pacemaker when the phone is switched on;

• Should not carry the phone in a breast pocket;

• Should use the ear opposite the pacemaker to mini-

mize the potential for interference.

• If you have any reason to suspect that interference is taking place, switch off your phone immediately.

Hearing Aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider.

Other Medical Devices

Operation of any radio transmitting equipment, including cellular phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (e.g. electronic fuel injection systems, electronic anti-skid (anti-lock) braking systems, electronic speed control systems, air bag systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

Posted Facilities

Switch your phone off in any facility where posted notices so require.

Potentially Explosive Atmospheres

Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Users are advised to switch off the phone while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats; chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.

Vehicles

Only qualified personnel should service the phone, or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit.

Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories.

For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network and may be illegal.

Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.

Emergency Calls

IMPORTANT!

This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user-programmed functions which can not guarantee connection in all conditions. Therefore, you should never rely solely upon any wireless phone for essential communications (e.g. medical emergencies).

Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.

Making an Emergency Call

1. If the phone is not on, switch it on

2. Key in the emergency number for your present location (e.g. 911 or other official emergency number). Emergency numbers vary by location.

3. Press

When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your wireless phone may be the only means of communication at the scene of an accident - do not cut off the call until given permission to do so.

Radio Frequency (RF) Signals

Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.

In August, 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with safety standards previously set by both U.S. and international standards bodies:

ANSI C95.1 (1992)*, NCRP Report 86 (1986)*, ICNIRP (1996)*. Those standards were based on comprehensive and periodic

evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies and industry reviewed the available body of research to develop the ANSI Standard (C95.1).

The design of your phone complies with the FCC guidelines (and those standards).

To maintain compliance with FCC RF exposure guidelines, use only Nokia approved accessories. When carrying the phone while it is on, place the phone in Nokia approved belt clip, carrying case or holster, or place the phone in a pocket so that the keypad faces your body.

*American National Standards Institute, National Council on Radiation Protection and Measurements; International Commission on Non-Ionizing Radiation Protection.

Microsoft NSD-1FW Users Guide

Specifications and Main Features

Frequently Asked Questions

User Manual