Microsoft NPL-2 Users Guide

User’s Guide

DRAF

9354993

Issue 1

The wireless phone described in this guide is approved for use in GSM 900, 1800 and 1900 netw orks .

LEGAL INFORMATION Part N o. 935 4993 I ssue No. 1 Copyright ©2002 Nokia. All rights reserved. Nokia is a registered trademark of Nokia Corporation. Nokia, Nokia Connecting People, Xpress-on, Pop-Port, the Original Accessories logos, Space Impact, Snake II, and Bumper are trademarks of Nokia Corporat ion and/or its affiliates.

rights re serv ed. Includes RSA BSAFE cryptog raphic or securit y protoc ol softw are from RSA Se curit y. The infor mat ion c onta ined in this user g uid e was writte n for Nok ia 6100 phone.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSI BLE FOR ANY L OSS OF DATA OR IN COME OR ANY S PECI AL, INCI DEN TAL, AN D CO NSEQ UE NTIA L OR INDIRECT DAMAGE S HOWSOEVER CA USED.

THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLI ED, INC LUDI NG, BU T NOT LI MITE D TO, THE I MPL IED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELAT ION TO T HE ACCURACY A ND RELIAB ILITY OR CONT ENTS OF THIS DOCUMENT. NOKI A RESERVES THE RIGH T TO REVISE THIS DOCUMENT O R WITHDRA W IT AT AN Y TI ME WITHO UT PR IOR NO TIC E.

EXPORT CONTROLS This product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited.

FCC/INDUSTRY CANADA NOTI CE Your phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Contents

FOR YOUR SAFETY................... 5

General information 7

Stickers in the sales package............. 7

Access codes........................................... 7

Overview of the functions in the

phone........................................ 9

Multimedia messaging

service (MMS)......................................... 9

Polyphonic sound (MIDI)..................... 9

General Packet Radi o Service (GPRS) 9

Loudspeaker .......................................... 10

MIDP JavaTM applications................ 10

Nokia OTA settings service ............... 10

Dynamic memory................................. 11

1. Your phone......................... 12

Keys and connectors........................... 12

Standby mode....................................... 13

Screen saver....................................... 13

Wallpaper........................................... 13

Essential indicators

in standby mode............................... 14

Putting on the wrist strap................. 15

2. Getting started................... 16

Installing the SIM card

and the battery .................................... 16

Charging the battery.......................... 18

Switching the phone on and off..... 18

Normal operating position................ 19

Keypad lock (Keyguard)..................... 19

Changing the front cover.................. 20

3. Call functions..................... 22

Making a call........................................ 22

Speed dialling a phone number... 22

Making a conference call .............. 23

Answering or rejecting

an incoming call.................................. 23

Call waiting ...................................... . 23

Options during a call.......................... 24

Loudspeaker....................................... 24

4. Writing text........................ 25

Setting predi cti ve

text input on or off............................. 25

Using predictive text input............... 25

Writing compound words.............. 26

Using traditional text input .............. 26

Tips for writing text............................ 27

5. Phone book (Names) .......... 28

Selecting the phone book settings. 28 Saving names and phone

numbers (Add name) .......................... 28

Saving multiple number s

and text items per name................ 29

Searching for a nam e

in the phone book............................... 30

Editing a name, number

or text item........................................... 30

Erasing names and numbers ............ 30

Copying phone books......................... 30

Sending and receiving

a business card..................................... 31

Speed dials ............................................ 32

Info numbers........................ ................. 32

Service numbers.................. ................. 32

My numbers......... ................................. 32

Caller groups......................................... 33

6. Using the menu .................. 34

Accessing a menu function .............. 34

List of menu functions....................... 35

7. Menu functions.................. 38

Messages (Menu 1)............................. 38

Text messages................................... 38

Multimedia messages ..................... 43

Multimedia message s

Contents

memory full....................................... 46

Erasing messages............................. 47

Chat...................................... ............... 47

Voice messages................................ 48

Info messages................................... 48

Message settings.............. ............... 48

Service commands .......................... 51

Call register (Menu 2) ........................ 51

Recent calls lists.............................. 51

Call counters and call timers ....... 52

Profiles (Menu 3).................. ............... 53

Settings (Menu 4).............................. 54

Time and date settings................... 54

Call settings ...................................... 54

Phone settings.................................. 56

Display settings................................ 58

Tone settings..................................... 60

Accessory settings........................... 60

Security settings.............................. 61

Restore factory settings................. 62

Alarm clock (Menu 5)........................ 62

Gallery (Menu 6)................................. 62

Organiser (Menu 7) ............................ 64

Calendar.............................. ............... 64

To-do list............................................ 66

Games (Menu 8).................................. 67

Launching a game............ ............... 67

Game services................................... 67

Memory status for games............. 68

Game settings.... ................ ............... 68

Applications (Menu 9)....................... 68

Launching an applicatio n.............. 68

Downloading an appli c ation ........ 69

Memory status for applications.. 71

Extras (Menu 10)................................. 71

Calculator .......................................... 71

Countdown timer ............. ............... 72

Stopwatch .......................... ............... 72

Wallet ................................................. 73

Connectivity (Menu 11) .................... 75

Infrared............................................... 75

GPRS....................... ............................. 76

Services (Menu 12) ............................. 77

Basic ste ps for accessi ng

and using WAP services................. 78

Setting up the phone

for a WAP service............................ 78

Making a connection

to a WAP service.............................. 80

Browsing the pages

of a WAP service................. ............. 81

Ending a WAP connection ............ 83

Appearan ce settings

of WAP browser............................... 83

Cookie settings................................. 83

Bookmarks......................................... 84

Service inbox .................................... 84

The cache memory.......................... 85

Authority certificates ..................... 85

Browser security.............................. 86

SIM services (Menu 13)..................... 88

8. PC Connectivity.................. 89

PC Suite ................................................. 89

GPRS and HSCSD............................. 90

Using data communication

applications.......................................... 90

9. Battery statements............. 91

Charging and Discharging... ............. 91

10.Technical information ...... 92

11.Patents .............................. 93

CARE AND MAINTENANCE ... 94

IMPORTANT SAFETY

INFORMATION........................ 95

APPENDIX ............................. 100

A message from the CTIA.... 100

A message from the U.S. Food

and Drug Administration..... 103

FOR YOUR SAFETY

Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual.

Do not switch the phone on when wireless phone use is prohibited or when it may ca use inte rfere nce o r dange r.

ROAD SAFETY COMES FIRST

Don't use a hand-held phone while driving.

INTERFERENCE

All wireless phones may get interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any regulations or rules. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRA FT

Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELLING

Don't use the phone at a refuelling point. Don't use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Don't use th e phone wher e bla stin g is in p rogres s. Obs erve restrictions, and follow any regulations or rules.

USE SENSIBLY

Use only in the normal position. Don't touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair phone equipment.

ACCESSORIES AND BATTERIES

Use only approved accessories and batteries. Do not connect incompatible products.

CONNECTING TO OTHE R DEVICES

When connecting to any other device, read its user's guide for detailed safety instructions. Do not connect incompatible products.

FOR YOUR SAFETY

BACKUP COPIES

Remember to make backup copies of all important data.

WATER- RESISTANCE

Your phone is not water-resistant. Keep it dry.

CALLING

Ensure the phone is switched on and in service. Enter the phone number, inclu ding t he area co de, t hen pres s . To end a ca ll, press . To ans wer a cal l, pres s .

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press as many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the display. Ent er the emerg ency nu mber, t hen pre ss . Give your location. Do not end the call until told to do so.

■

Network Services

The wireless phone described in this guide is approved for use on the EGSM 900, GSM 1800 a nd GS M 1900 networ k.

Triband is a network dependent feature. Check with your local service provider if you can subscribe to and use this feature.

A number of features included in this guide are called Network Services. These are special services that you arrange through your wireless service provider. Before you can take advantage of any of these Network Services, you must subscribe to them through your service provider and obtain instructions for their use from your service provider.

Some networks may not support all language-dependent

Note:

charac ters an d/o r servic es.

■

About accessories

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from ACP-12 and LCH-12.

Warning:

phone manufacturer for use with this particular phone model. The use of any other types may invalidate any approval or warranty applying to

the phone, and may be dangerous. For availability of approved accessories, please check with your dealer. When you disconnect the power cord of any accessory, grasp and pull the plug,

not the cord.

Use only batteries, chargers and accessories approved by the

General information

Stickers in the sales package

■

The stickers cont ain important in formation for services a nd customer support purposes.

Attach the sticker to your warranty card. Attach th e stick er to the Nok ia Clu b Inv it ati on Card supp lied in th e

sales package.

Access codes

■

Security code (5 to 10 digits):

• phone against unauthorised use, and is supplied with t he phone. The preset code is 12345. Change the code, and keep the new code secret and in a safe place separate from your phone. T o change the code, and to set the phone to requ est the code, see Se curity settings on page 61.

PIN code and PIN2 code (4 to 8 digits):

• Identification Number) code protects your SIM card against unauthorised use. The PIN code is us ually supplied with the SIM card.

Set the phone to request the PIN code each time the phone is switched on, see Security settings on page61.

The PIN2 code may be supplied with the SIM card a nd is required to access some functions, su ch as charging unit coun ters.

If you key in an incorrect PIN code several ti mes, the phone may

SIM blocked and ask you to key in the PUK code. Contact your

display service provider to get the PUK code.

• PUK and PUK2 codes (8 digits): The PUK (Personal Unblocking Key) code is required to change a blocked PIN code. The PUK2 code is required to change a blocked PIN2 code.

If the codes are not supplied with t he SIM card, contact your local service provider for the codes.

The security code protects your

The PIN (Personal

General information

• Barring password (4 digits): The barring password is ne eded when using the Call barring service, see Security settings on page 61. You can obtain the password from your s ervice provider.

• Signing PIN: The signing PI N is needed for the digital signature. See Digital signature on page 88. The signing PIN is supplied with the SIM card if the SIM card con tains a security m odule.

If you key in an incorre ct PIN code several tim es, the phone may display SIM blocked and ask you to key in the PUK code. Contact your service provider to get the PUK code.

• Wallet code (4-10 digits): The wallet code is needed to access the wallet services. If you key in a wrong wallet code several times, the wallet application is blocked for five minutes. For further information, see Wallet on page 73.

Overview of the functions in the phone

The Nok ia 6100 phone pro vides ma ny func tio ns whi ch are pra ctica l for daily use, such as Calendar, Clock, Alarm clock , Calculator, and many more. Also a range of Nokia Xpress-on your phone. To change the cover , see Changing the f ront cover on page 20.

Multimedia messaging service (MMS)

■

The phone is able to send multimedia messages made up of text and a picture, and to receive messa ges containing text, pictu res and sounds. You can save the pictures and sounds for per sonalising your phone. See Multimedia messages on page 43.

Polyphonic sound (MIDI)

■

Polyphonic sound consists of several soun d components played at th e same time like a real melody throu gh a speaker. Polyph onic sounds are used in ringing tones and mess age alert tones. Your phone has sound components from over 40 instruments t hat can be u sed for polyphonic sounds but the phone ca n play four ins trument s sim ult aneously . T he phone supports the Scalable Polyphonic MIDI (SP-MIDI) format.

You can receive polyphonic ringing tones via m ultimedia service, see Reading and replying to a multimedia message on page 45, or download them via the gallery menu, see Gallery (Menu 6) on page 62 or via the PC suite, see PC Suite on page 89.

colour covers is available for

General Packet Radio Service (GPRS)

■

GPRS technology allows mobile phones to be used for sending and receiving data over the mobile network. GPRS as s uch is a data bearer that ena bles wir el ess ac ces s to data netw orks like th e Inte rnet . Th e applications that use GPRS are WAP services, MMS and SMS messaging, MIDP Java example, In tern et a nd e-m ail) .

application downloading and the GPRS dial-up (for

Overview of the functions in the phone

Before you can use GPRS technology

• Contact your network operator or service provider for availability and subscription to the GPRS service.

• Save th e GPRS s et tings for each of t he app lica ti ons us ed ove r GP RS. See Setting up the phone for a WAP service on page 78, Message

settings on page 48 and GPRS on page 76.

Pricing for GPRS and applications

Both the active GPRS connection and the applications used over GPRS are priced. For more detailed information on pricing, contact your network operator or service provide r.

Loudspeaker

■

The loudspea ker all ows you to use your pho ne as a speakerph one, als o during a conference call. See Loudspea ker on page 24.

MIDP JavaTM applications

■

Your phone supports Java technology and includes some MIDP Java applications and games that have been specially designed for mobile phones. You can download new applications and games to your phone from a PC with a Java installe r software or fr om WAP servic es, e.g. f rom Club Nokia. See Applications (Menu 9) on page 68.

Nokia OTA settings service

■

In order to use WAP, MMS, GPRS and other wireless services you need to set proper settings in your phone . You may receive th e settings directly as an OTA (Over The Air) message and you only need to save the settings. For more information and availability of the settings, contact your nearest authorised Nokia dealer.

Overview of the functions in the phone

Dynamic memory

■

Your phon e uses dyna mic memo ry for some functions . Dynamic memory means that the phone’s memory is shar ed between diffe rent functions. In addi tion to the d ynami c memo ry , a min imum amo unt o f memo ry is reserv ed f or eac h o f the f unct ions . T he ph one disp lays a note if t he re is not enough memory for a fun ction. In the Gallery, Games and

Applications menu you can view the size of the downloaded graphic and

ringing tone files and the downloaded Java applications. The maximum size of the memory for a function is available if enough dynamic memory is free

The following fu nctions share the phone’s dynamic memory

• Phone book (Names), see page 28. You may sa ve up to 300 na mes a nd phon e nu mber s.

• Text messages, see page 38 . You may sa ve up to 150 t ext me ssa ges or 50 p ictur e or mult i-part messages.

• Multimedia messages, see page 43. You may sa ve up t o 15 mes sage s wi th t he ma ximu m siz e o f 30k B each.

• Gallery (Menu 6 ) for rin ging to nes and ima ges, see pa ge 62. You may sa ve up to 60 ring ing tones with an ave rag e size of 5k B o f which 20 are removable and up to 35 images with an average size of 10kB.

• Calenda r, see pag e 64. Y ou may save up t o 250 c alenda r notes.

• To-do l ist, se e pa ge 66 . You may sav e up to 30 notes.

• Java applications, see Games (Menu 8) on page 67 and Applications (Menu 9) on page 68. You may save up to six applications and/or games wit h a maximum size of 64kB each.

Your phone

1. Your phone

Keys and connectors

■

1. Power key Switches the phone on and

off. For example, when the keypad is locked, pressing the power key briefly turns the phone’s display lights on for approximately 15 seconds.

2. Volume keys Keys to adjust the earpiece,

headset and loudspeaker volume.

3. Selection keys

and

The function of the keys depends on the guiding text shown on the display above the keys , fo r exa mple,

Menu and Names in

standby mode.

4. 4-way scroll key with , , and Enables sc ro lling throug h na mes, phon e number s, m enus or se tti ngs

and in the calendar. In standby mode, pressing opens the Create

message menu and pressing opens the Calendar menu.

5. dials a phone number, and answers a call. In standby mode it shows the most recently called number.

6. ends an activ e call . Exits from any function.

7. - enter numbers a nd charact ers.

and are used for various pur poses in differen t functions.

Your phone

1. Charger connector

2. Pop-Port headset and data cable, for example

3. Infrared (IR) port

Standby mode

■

When the phone is ready for use, and you have not ke yed in any characters, the phone is in standby mode.

1. Indicates in which cellular network the phone is currently being used.

2. Shows the signal strength of the cellular network at your current location. The higher the b ar, t he s tro nger the si gn al.

3. Shows the battery charge level. The higher the bar, the more power in the battery.

4. The left selection key in standby mode is Menu.

5. The right selection key in standby mode is Names.

See also Essential indicators in st andby mode on page 14.

connector for

Screen saver

The phone automatically activates the screen saver, a digital clock view, for power saving in standby mode . It will be act ivated after a certain time when no function of t he phone is used. Se e Screen saver on page 59. Press any key to deactivate the screen saver .

Note that if you have not set the time, 00:00 is displayed. To set the time, see Clock on page 54.

Wallpaper

You can set your phone to display a backgrou nd picture, wallpaper, when the phone is in standby mode. See Wallpaper on page58.

Your phone

Essential indicators in standby mode

You have received one or several t ext or picture messages. See Reading and replying to a message or an e-mail on page40.

You have received one or several multimedia messages. See Reading and replying to a multimedia message on page 45.

You have received one or several voice messages. See Voice messages on page 47.

The phone’s keypad is locked. See Keypad lock ( Keyguard) on page 19.

The phone does not ring at an incomin g call or text me ssage when Incoming call alert is set to Off and Message alert tone is set to Off. See Tone settings on page 60.

The alarm clock is set to On. See Alarm clock (Menu 5) on page 62.

The count down time r is r unnin g. Se e Coun tdow n ti mer on page 72.

The stopw atch t imer is ru nnin g i n the backgr ound . See Stopwatch on page 72.

A GPRS dial-up connection is esta blished, refer t o GPRS modem settings on page 77. The indicator is shown on the top left of the disp lay .

There is an incoming or outgoing call or a text message during a GPRS dial-up conne ction. The GPRS connectio n is suspende d.

Infrared connection indicator, see Infrared on page75. All your calls are diverted to another number, Divert all voice

calls. If you have two phone lines, the divert indicator for the

first line is and for the second line . See Call divert on page 54.

or Indicates the selected phone line, if you have two phone line s.

See Line for outgoing calls on page 56.

Your phone

The loudspeaker has been activated, se e Loudspeaker on page 24.

Calls are limited to a closed user group. See Security settings on page 61.

The timed profile is selected. See Profile s (Menu 3) on page53.

Headset, handsfree or loopset accessory is connecte d to the phone.

To set the phone to show the time and date in standby mode, se e Clock on page 54 and Date on page 54.

Putting on the wrist strap

■

Thread the strap as shown in the pict ure and then tighten it.

Getting started

2. Getting started

Installing the SIM card and the battery

■

Keep all miniature SIM cards out of the reach of small children.

• The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting or re moving the card.

• Before removing the battery switch off the phone.

1. To remove the back cover from t he phone: With the back of the phone facing you, pu sh the back cover release

button (1) and slide the back cover off (2). Remove the battery by lifting it with the finger grip.

2. To release the SIM card holder, gently pull the locking of the card holder (4) and ope n it (5).

3. Insert the SIM card into the SIM card holder (6). Make sure that the SIM card is properly inserted and th at the golden contact area on the card is faced like shown.

4. Close the SIM card holder (7) and press it as it locks.

5. Insert the battery (8).

Getting started

6. Slide the back cover into its place (9).

Getting started

Charging the battery

■

1. Connect t he lea d fr om the charger to the sock et on the bottom of your phone.

2. Connect t he charg er to an AC wall socket.

The text Charging is displayed briefly if the phone is switched on. If the battery is completely empty, it may take a few minutes before the charging in dicator appears on t he display or any calls can be made.

You can use t he pho ne whi le th e ch arge r is conne cted . The charging time depends on the charge r and the battery us ed. For

example, charging a BL-4C battery with the ACP-12 charger takes up to one hour and 30 minutes in standby mode.

■ Switching the phone on and off

Press and hold the power key . Note that if the phone displays Insert SIM card

even though the SIM card is properly inserted, or

SIM card not supported, contact your network

operator or service provider. Y our phone does not support 5 Volt SIM cards and the card may need to be changed.

• If the phone asks for a PIN code, key in t he PIN code (displayed as ****), and pres s OK.

See also PIN code request in Security settings on page61 and Access codes on page 7.

• If the phone asks for a secu rity code, key in the security code (disp lay ed as *****) , and press OK.

See also Access codes on page 7.

Warning:

prohibited or when it may c ause i nterfer ence or dang er.

Do not switch the phone on when wireless phone use is

Getting started

Normal operating position

■

Use the phone only in its normal operating position. Your pho ne has a b uilt -i n ante nna. As wi th an y othe r

radio transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Not touching the antenna area during a phone call optimises the antenna performance and the talktime of your phone.

Keypad lock (Keyguard)

■

You can lock the ke ypad to pre vent the keys be ing accidentally pressed, for example, when your phone is in your handbag.

• Locking the keypad In standby mode, press Menu an d

then within 1.5 seconds.

• Unlocking the keypad Press Unlock and then wi thin

1.5 second s.

To ans wer a call w hen the k eyp ad i s locked, press . During a call, the phone can be operated normally. When you en d or r ejec t t he c all, th e ke ypad will automatically be locked again.

For automatic keypad lock, se e Automatic keyguard on page56. For locking the keypad during a call, see Opt ions during a call on

page 24.

When the keypad is locked, calls may be possible to the

Note:

emergency number programmed into your phone (e.g. 112, 911 or other official emergency number). Key in the emergency number and press

. The number is displayed only after you have keyed in its last

digit.

Getting started

Changing the front cover

■

Before changing the front cover, always switch off the power and disconnect the phone from the charger or any other de vice. Always store and use the phone with the covers attached.

1. Remove the back cover of the phone. See step 1 in Installing the SIM card and the battery on page16.

2. To remove the front cover, gently disperse the back part of the phone and the front cover beginning at the bottom of the phone.

3. Insert the key mat on the new front cover.

Getting started

4. To attach the front cover, fir st place the back pa rt of the phone and the front cover properly toge ther and then gently push on the bottom and the top of the phone until the catche s are locked properly.

5. Slide the back cover into its place. See step 6 in Installing the SIM card and the battery on page16.

Call functions

3. Call functions

Making a call

■

1. Key in the phone number, including the area code. If you key in a wrong character, press

For international calls, press twice for the international prefix (the + character replaces the international access code) and then key in the country code, area code without the leading 0, if necessary, and the phone number.

2. Press to ca ll t he numb er.

3. Press to e nd t he c all o r to c ancel the call at temp t.

See also Options during a call on page24.

Making a call using the phone book

• See Searching for a name in the phone book on pa ge 30. Press to call the number on the display.

Last number redialling

• In standby mode, press once to access the list of the 20 numbers you last called or attempted to call. Scroll t o the number or name you w ant, and p ress to call t he number.

Calling your voice mailbox

• In standby mode, press and hold , or press and . If the phone asks for the voice mailbox number, key it in and press

. See also Voice messages on page 47.

Clear

to delete it.

Speed dialling a phone number

Assign a phone number to one of the speed dialling keys, from to

, see Speed dials on page 32. Call the number in either of the

following ways:

• Press the speed dialling key you want and then press .

•If Speed dialling is set to on, press and hold a speed dialling key until the call is started. See Speed dialling on page 55.

Call functions

Making a conference call

Conference calling is a network service that allows up to six persons to take part in a conference call.

1. Make a call to the first participant.

2. To make a call to a new participant, press

call.

3. Key in, or retrieve from th e phone book, the phone number of the new participant and press Call. The first call is put on hold.

4. When the new call has been answered, join the first participant in the conference call. Press Options and select Conference.

5. To add a new participant to the call, repeat steps 2 to 4.

6. To have a private conversation wi th one of the participants: Press Options and select Private and select the desired pa rticipant.

Rejoin the conference call as described in step 4.

7. To end the c onfer ence cal l, pre ss .

Options

and select New

■ Answering or rejecting an incoming call

Press to a nswe r the inc oming call and press t o en d th e cal l. Press to reject the incoming call. Press

or reject the call. If the headset HDB-4 is connected to the phone, you can answer and

end a call by pressing the headset key.

, if available, to mute the ringing tone. Then either answer

Silence

If the Divert if busy function is activated to divert the calls,

Tip:

for example to your voice mailbox, rejecting an incoming call will also divert the call. See Call divert on page 54.

Call waiting

During a call, press to answer the waiting call. The first call is put on hold. Press to e nd the active call.

To activate the Call waiting function, see Call waiting on page55.

Call functions

Options during a call

■

Many of the opt ions th at you can use during a call , are net work servi ces.

Options

Press

Mute or Unmute, End call, End all calls, Phone book, Menu and Hold or Unhold, New call, Conference, Private, Answer, Reject and Loudspeaker

or Handset.

Lock keypad to activate the keypad lock. Send DTMF to send DTMF tone st rings, for e xample, passwords or ba nk

account numbers. Key in the DTMF string or search for it in the phone book and press OK. Note t hat you can key in the wait character w and the pause character p by repea tedly pressing .

Swap to switch between the active call and the call on hold, Transfer to

connect a call on hold to an active call, and disconnect yourself from the calls.

during a call for some of the following options:

Loudspeaker

You can use your phone as a louds peake r dur ing a call . Do not hold the phone to your ear during loudspeaker ope ration.

• To ac tiva te th e lo ud spea ker, pres s or press Loudsp., if available.

• To deactivate the loudspeaker duri ng a call, press Options and sel ect

Handset, or press Handset, if available.

If you have conne cted the hand sfree unit CARK126 or the hea dset to the phon e, Handset in the options list is replaced with Handsfree or

Headset and the selection key Handset with Handsfr. or Headset,

respectively. The loudspeaker is automatically deactivated when you end the call

or call a ttem pt or conne ct the hand sfr ee uni t or hea dset to the phone.

and select Loudspeaker,

Options

Writing text

4. Writing text

You can key in text, for example when writing messages, using the traditional or predictive text input.

When you are writing text, the predictive text input is indicated by and the traditional text input by at the top left of the display. Th e character case is indicated by , , or next to the text input indicator. You can change the character case by pressing . The number mode is indicated by , and you can change between the letter and number mode by pressing and holdin g .

Setting predictive text input on or off

■

When wri tin g text , pr ess Options and select Dictionary.

• To set the predictive text input on, select a language in the dictionary options list. Predictive text input is only available for the languages on the list.

• To change back to the traditional text input, select Dictionary off.

Tip: To quickly set the pre dictive text input on or off when writing text, press twice, or press and hold Options.

Using predictive text input

■

You can key in any letter with a single keypress. The pr edictive text input is based on a built-in dictionary to which you can also add new words.

1. Start writing a word by using the keys to . Press each key only once for one letter. T he word changes after e ach keystroke.

Example: To write Nokia when the English dictionary is selected, press once for N, once for o, once for k, once for i and once for a:

To insert a number while in letter mode, press and hold the desire d number key.

Writing text

More instructions for writing text, see Tips for writing text on page 27.

2. When you have finished writing the word and it is correct, confirm it by adding a space with or by pre ssing any of t he scroll keys. Pressing a scroll key also m oves the cursor .

If the word is not corr ect, press repeatedly or press Options and select Matches. When the word you w ant appears, confirm it.

If the ? cha racte r i s d ispl ayed afte r t he wo rd, th e wor d you i nte nded to writ e is not in t he d icti onary . T o add th e wor d to the dict io nary, press Spell, key in the word (traditional t ext input is used) and press

Save. When the dic tionary becomes full, the new word re places t he

oldest one that was added.

3. Start writing the next word.

Writing compound words

Key in the first part of the wor d and confirm it by pressing . Write the last part of the word and conf irm the word.

Using traditional text input

■

Press a number key, to , repeatedly until the desired character appears. Not all characters available under a number key are printed on the key. The characters available de pend on the language selected in the Language menu, see Language on page 56.

To insert a number while in letter mode, press and hold the desired number key.

• If the next letter you want is located on the same ke y as the prese nt one, wait until the cursor appears, or press any of the scroll keys and then key in the letter.

• The most common punctuation marks and special characters are availabl e un der the nu mber key .

More instructions for writing text, see Tips for writing text on page 27.

Writing text

Tips for writing text

■

The following functions may also be available for writing text:

• To insert a space, press .

• To move the cursor to the le ft, r ight, down or up, press t he scroll keys , , or , respectively.

• To delete a character to th e left of t he cursor, pre ss

Clear

hold To delete all the characters at once when writing a message, press

Options

• To insert a word when using the predict ive text input, press Options

and select Insert word. Write the word using the traditional text input and press Save. T he word is also added t o the dictionary.

• To insert a special character when using the traditional text input,

press , or when using the pre dictive text input, pr ess and hold

Press any of the scroll keys to scroll to a character and press Use to select the character.

You can also scrol l to a char acter by pre ssing , , or

The following options are available when writing text messages:

• To insert a number while in letter mode, press Options and sel ect

Insert number. Key in the phone number or search it in t he phone

book and press OK.

• To insert a name from the phone book, press Options an d sel ec t

Insert name. To insert a pho ne nu mber or a text it em at tache d to the

name, press Options and select View details.

to delete the characters more quickly.

and selectClear text.

, or press Options and select Insert symbol.

, and select the character by pressing .

Clear

. Press and

Phone book (Names)

5. Phone book (Names)

You can save names and phone numbers in the phone’s memory (internal phone book) and in the SIM card’s memory (SIM phone book).

• The internal phone book may save up to 300 names with numbers and textua l not es fo r each name. How many na mes ca n be saved depends on the length of the names, a nd the number and length of phone numbers and text items.

The internal phone book uses dynamic memory, see Dynamic memory on page 11.

• The phone supports SIM cards t hat can save up to 250 names and phone numbers. Names and numbers saved in the SIM card’s memory, are indicated by .

Selecting the phone book settings

■

Names

Press

• Memory in use to select the phone book you want to use. To rec all names and numbers from both phone books, select Phone and SIM. The names and numbers will be saved in the phone’s memory.

• Phone book view to select how the na mes ( and numbers) in th e phone book are displayed.

• Memory status to see how m any na mes and ph one nu mber s ar e currently saved and how many can still be saved in the selected phone book.

and select Settings. Select

■ Saving names and phone numbers (Add name)

Names and numbers will be saved in the used memory, see Selecting the phone book settings above.

1. Press

2. Key in the na me an d pres s OK. See Using traditional text input on page 26.

3. Key in the phone number, and press OK. To k ey in the number s, s ee Making a ca ll o n page22.

and sele ct Add name.

Names

Phone book (Names)

4. When the name and number are saved, pr ess Done.

Tip: Quick save In standby mode, key in the phone number. Press

Options, a nd select Save. Key in the name, pre ss OK and Done.

Saving multiple numbers and text items per name

You can save differen t types of phon e numbers and sh ort text items per name in the phone’s internal phone book.

The fir st numbe r sa ved is a ut omati cal ly se t as the def au lt n umber and i t is indicated with a frame around the number type indicator, for example

. When you select a name from the phone book, for example to make

a call, the default number is used unless you select another number.

1. Make s ure th at the memor y in u se i s ei ther Phone or Phone and SIM. See Selecting the phone book settings on page28.

2. To access the list of names and phone numbers, pres s or in standby mode.

3. Scroll to the name saved in the phone’s internal phone book to which you want to add a new number or text item, and press Details.

4. Press Options and select Add number or Add detail.

5. Select one of the following number types General, Mobile,

Home, Office and Fax,

or text type s E-mail address, Web address, Postal address and Note.

To change the type of a number or t ext, select Change type in the options list.

6. Key in the number or text item and pre ss OK to s ave i t.

7. Press Back and then Exit to return to standby mode.

Changing the default number

Press or in standby mode, scroll to the name you want and press

Details. Scroll to the nu mber y ou want to s et a s the defa ult nu mber.

Press Options an d sele ct Set as default.

Phone book (Names)

Searching for a name in the phone book

■

1. Press

2. You can key in the first cha racters of the name you are search ing for

3. Scroll to the name you want, and press Details. Scr o ll to vi ew the

■

Search for t he na me (a nd n umber) you w ant t o edit and p ress Details. Scroll to the name, number or text item you want to edit, and press

Options. Select Edit name, Edit number, or Edit detail, and edit the

name, number, or text an d press OK.

■

Press Names and select Delete.

• To delete names and numbers one by one, select One by one and

• To delete names and numbers in the phone book all at once, select

Names

and sele ct Search.

in the pop-up window. Press and to scroll through the names in the list, and and

to move the cursor in the pop-up window.

details of the selected name.

Tip: To quickly find a name and phone number, press or in standby mode. Key in the first letter(s) of the name, and/or scroll to the name you want.

Editing a name, number or text item

Erasing names and numbers

scroll to the name ( and number) you want to delete . Press Delete an d press OK to confirm.

Delete all and then scroll to t he phone book, Phone or SIM card and

press Delete. Press OK and confirm with the securi ty code.

Copying phone books

■

You can copy names and phone numbers f rom the phone’s memory to your SIM card’s memory and vice versa.

1. Press Names and sele ct Copy.

2. Select the copying direction, From phone to SIM card or From SIM

card to phone.

+ 80 hidden pages