Nokia Bluetooth Stereo Headset
BH-610
1111111/1
Cyan Magenta Yellow Black
Cyan Magenta Yellow Black
ENGLISH
Introduction
About your headset
With the Nokia Bluetooth Headset BH-610, you can handle calls hands-free and listen to music on the go. Active noise cancellation (ANC) helps you enjoy high audio quality also in noisy environments. The headset is easy to pair with compatible devices.
The surface of this product is nickelfree.
Warning: This product may contain small parts. Keep them out of the reach of small children.
Parts of the product are magnetic. Metallic materials may be attracted to the product. Do not place credit cards or other magnetic storage media near the product, because information stored on them may be erased.
Read this user guide carefully before using the product. Also, read the user guide for the device that you connect to the product.
For support, go to www.nokia.com/support.
About Bluetooth connectivity
You can use Bluetooth to make a wireless connection to other compatible devices, such as mobile devices.
Devices do not need to be in direct line-of-sight, but they must be within 10 metres (33 feet) of each other. The connection may be affected by obstructions such as walls or other electronic devices.
This device is compliant with Bluetooth Specification 2.1 + EDR supporting the following profiles:
Cyan Magenta Yellow Black
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ENGLISH |
|
||||
|
|
|||||
Headset Profile (HSP) 1.2, Hands-Free |
(AVRCP) 1.0. Check with the |
|
|
|||
Profile (HFP) 1.5, Advanced Audio |
manufacturers of other devices to |
|
||||
Distribution Profile (A2DP) 1.2, and |
determine their compatibility with |
|
||||
Audio Video Remote Control Profile |
this device. |
|
Get started
Keys and parts
1 Charger connector
2 Indicator light
3 Volume keys
4Clip
5Rewind key
6Play/Pause key
7Fast-forward key
8Treble key
9Bass key
10Multifunction key
11Active noise cancellation (ANC) switch
12Neck strap
13Microphone
14Earpiece
15Near Field Communication (NFC) area
Charge the battery
Before using the headset, you must charge the battery.
When you unplug a charger, hold and pull the plug, not the cord.
1.Connect the charger to a wall outlet.
2.Connect the charger cable to the charger connector on the headset. The red indicator light
Cyan Magenta Yellow Black
ENGLISH
turns green when the battery is fully charged.
3.Disconnect the charger from the headset, then from the wall outlet.
The fully charged battery has power for up to 8 hours of talk time or music playing time, or up to 35 hours of standby time with active noise cancellation (ANC) activated. To increase standby time, deactivate ANC if you are not using the headset. When ANC is not activated, the standby time is up to 240 hours.
After 15 minutes of charging, the battery has power for over 4 hours and 30 minutes of talk or music playing time.
When the battery charge is low, the headset beeps every 5 minutes and the red indicator light flashes.
If you activate ANC without switching the headset on, when the battery charge is low, the headset doesn't beep and the red indicator light stays on.
Check the battery charge —
With your headset connected to your mobile device, press . A green light indicates a sufficient charge level. If the light is yellow, you may need to recharge the battery soon. If the light is red, recharge the battery.
Switch the headset on or off
To switch the headset on, press and hold for 2 seconds. The headset beeps, and a green indicator light flashes once. The headset automatically connects to the last connected device. If you have never paired the headset with a device, or you have cleared
Cyan Magenta Yellow Black
ENGLISH
the paired devices list, pairing mode is automatically activated.
To switch the headset off, press and hold for 4 seconds. The headset beeps, and a red indicator light flashes once.
If the headset is not connected to a device within 30 minutes, it switches off.
Wear the headset
You can attach the headset to your clothing using the clip, or carry it on your neck using the neck strap.
To attach the neck strap, slide the earpiece cable into the neck strap clip, and twist the cable 90 degrees to lock it into place.
The headset is provided with different-sized rubber earpieces. Select the ones that fit you best.
Make sure you insert the earpiece marked with L into your left ear
and the one marked with R into your right ear.
Use active noise cancellation (ANC)
Active noise cancellation (ANC) reduces background noise, so you can enjoy high audio quality also in noisy environments. As you can listen at a lower volume, ANC helps protect your hearing.
Use the ANC switch to activate or deactivate ANC.
You can activate ANC even when your headset is switched off, and use your headset as ear plugs to reduce background noise, for example, when on a plane.
Tip: To save battery power, make sure ANC is not activated when you are not using the headset.
Cyan Magenta Yellow Black