Microsoft BH 222 User Manual

User Guide

Nokia Bluetooth Headset BH-222

Issue 1 EN

Keys and parts

1Earloop 2Earpiece 3Multifunction key 4Microphone 5 Charger connector 6 Indicator light

The surface of this product is nickel-free.

Warning: This product may contain small parts. Keep them out of the reach of small children.

Some of the accessories mentioned in this user guide, such as charger, headset, or data cable, may be sold separately.

Charge your headset

Before using the headset, you must charge the battery.

1. Plug the charger into a wall outlet.

2. Connect the charger cable to the charger connector on the headset. The red indicator light turns

green when the battery is fully charged.

3. Disconnect the charger from the headset, then from the wall outlet.

When you unplug a charger, hold and pull the plug, not the cord.

The fully charged battery has power for up to 6 hours of talk time or up to 120 hours of standby time. When the battery charge is low, the headset beeps every 5 minutes, and the red indicator light flashes.

Check the battery charge

Make sure the headset is switched on, then press . A green light indicates a sufficient charge level. If the light is yellow, you may need to recharge the battery soon. If the light is red, recharge the battery.

Switch on your headset

Press and hold for 2 seconds. The headset beeps, and a green indicator light flashes once.

The headset automatically connects to the last connected device. If you have never paired your headset with a device, or you have cleared the pairings, pairing mode is activated.

If the headset is not connected within 30 minutes, it switches off.

Switch the headset off

Press and hold for 5 seconds. The headset beeps, and a red indicator light flashes once. All connections are closed and the headset switches off.

+ 7 hidden pages