Microsoft BH-220 Users Manual

Nokia Luna User Guide

Issue 1

2

Introduction

About your headset

With the Nokia Luna Bluetooth Headset, you can handle calls hands-free, even when
you are using two phones at the same time. Remove the headset from the cradle, and
it's instantly ready for use.

The surface of this product is nickel-free.

Warning:

This product may contain small parts. Keep them out of the reach of small children.

Parts of the product are magnetic. Metallic materials may be attracted to the product.
Do not place credit cards or other magnetic storage media near the product, because
information stored on them may be erased.

Read this user guide carefully before using the product. Also, read the user guide for
the device that you connect to the product.

For more information, go to www.nokia.com/support.

About Bluetooth connectivity

You can use Bluetooth to make a wireless connection to other compatible devices, such
as mobile devices.

Devices do not need to be in direct line-of-sight, but they must be within 10 metres (33
feet) of each other. The connection may be affected by obstructions such as walls or
other electronic devices.

This device is compliant with Bluetooth Specification 2.1 + EDR supporting the following
profiles: Headset Profile 1.1 and Hands-Free Profile 1.5. Check with the manufacturers
of other devices to determine their compatibility with this device.

Get started

Keys and parts

8

1 Microphone
2 Earpiece
3 Charging indicator light
4 Cradle
5 Charger connector
6 NFC area
7 Bluetooth indicator light
8 Multifunction key

Charge the battery

Before using the headset, you must charge the battery.

Warning:

Use only chargers approved by Nokia for use with this particular model. The use of any
other types may invalidate any approval or warranty, and may be dangerous. Use of
unapproved chargers may present a risk of fire, explosion, or other hazard.

3

1 Connect the charger to a wall outlet.
2 Place the headset in the cradle.
3 Connect the charger cable to the charger connector in the cradle. The red charging

indicator light switches off when the battery is fully charged.

4 Disconnect the charger from the cradle, then from the wall outlet.

When you unplug a charger, hold and pull the plug, not the cord.

The fully charged battery has power for up to 2 hours of talk time and up to 35 hours
of standby time. If you keep the headset in the cradle, the standby time is up to 2
months.