Microsoft BH-217 User Manual

Nokia Bluetooth Headset BH-217

1

3

2

7

Issue 1

4

6

5

8

10

9

12

13

11

14

DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that
this BH-217 product is in compliance with

the essential requirements and other
relevant provisions of Directive 1999/5/EC. A
copy of the Declaration of Conformity can be
found at http://www.nokia.com/phones/
declaration_of_conformity/.

© 2010 Nokia. All rights reserved.
Nokia, Nokia Connecting People and the

Nokia Original Accessories logo are
trademarks or registered trademarks of
Nokia Corporation. Nokia tune is a sound
mark of Nokia Corporation. Other product
and company names mentioned herein may
be trademarks or tradenames of their
respective owners.
Reproduction, transfer, distribution, or
storage of part or all of the contents in this
document in any form without the prior
written permission of Nokia is prohibited.
Nokia operates a policy of continuous
development. Nokia reserves the right to
make changes and improvements to any of

ENGLISH

the products described in this document
without prior notice.

Bluetooth is a registered trademark of
Bluetooth SIG, Inc.

To the maximum extent permitted by
applicable law, under no circumstances shall
Nokia or any of its licensors be responsible
for any loss of data or income or any special,
incidental, consequential or indirect
damages howsoever caused.

The contents of this document are provided
"as is". Except as required by applicable law,
no warranties of any kind, either express or
implied, including, but not limited to, the
implied warranties of merchantability and
fitness for a particular purpose, are made in
relation to the accuracy, reliability or
contents of this document. Nokia reserves
the right to revise this document or
withdraw it at any time without prior notice.

The availability of products may vary by
region. For more information, contact your
Nokia dealer. This device may contain
commodities, technology or software
subject to export laws and regulations from
the US and other countries. Diversion
contrary to law is prohibited.

Introduction

With the Nokia Bluetooth Headset
BH-217, you can make and answer
calls hands-free with your compatible
mobile device.

Read this user guide carefully before
using the headset. Also, read the user
guide for the device that you connect
to the headset.

This product may contain small parts.
Keep them out of the reach of small
children.

Warning: The connector of
the clip and car cradle may

contain a small amount of
nickel. Persons who are sensitised to
nickel may have symptoms from
prolonged skin contact with the
connector.

Bluetooth wireless technology

Bluetooth wireless technology allows
you to connect compatible devices

ENGLISH

without cables. The headset and the
other device do not need to be in line
of sight, but they should be within 10
metres (33 feet) of each other.
Connections may be subject to
interference from obstructions, such
as walls, or other electronic devices.

The headset is compliant with the
Bluetooth Specification 2.1 + EDR
supporting the Headset Profile 1.1 and
Hands-Free Profile 1.5. Check with the
manufacturers of other devices to
determine their compatibility with
this device.

Get started

The headset contains the following
parts shown on the title page:
multifunction key (1), earloop (2),
indicator light (3), earpiece (4),
microphone (5), and charger
connector (6).

Before using the headset, you must
charge the battery and pair the
headset with a compatible device.

Parts of the device are magnetic. Metallic
materials may be attracted to the device.
Do not place credit cards or other
magnetic storage media near the device,
because information stored on them may
be erased.

Charge the battery

Before charging the battery, carefully
read “Battery and charger
information”.

1. Connect the charger to a wall

outlet.

ENGLISH

2. Connect the charger cable to the
charger connector.

To charge the headset when it is in

the clip or car cradle, insert the
lower end of the headset into the
clip or car cradle (12), and connect
the charger cable to the charger
connector on the clip or cradle
(13).

The red indicator light is displayed

during charging. Charging the
battery fully may take up to 2
hours.

3. When the battery is fully charged,
the green indicator light is
displayed. Disconnect the charger
from the headset (or from the clip
or car cradle), then from the wall
outlet.

When you unplug a charger, hold

and pull the plug, not the cord.