Microsoft BH 110U, BH 110 User Manual

Nokia Bluetooth Headset BH-110 User Guide

Issue 1

2

Introduction

About your headset

With the Nokia Bluetooth BH-110 headset, you can handle calls hands-free, even when
you are using two phones at the same time.

The surface of this product is nickel-free.

Warning:

This product may contain small parts. Keep them out of the reach of small children.

Parts of the product are magnetic. Metallic materials may be attracted to the product.
Do not place credit cards or other magnetic storage media near the product, because
information stored on them may be erased.

Read this user guide carefully before using the product. Also, read the user guide for
the device that you connect to the product.

About Bluetooth connectivity

You can use Bluetooth to make a wireless connection to other compatible devices, such
as mobile phones.

Devices do not need to be in direct line-of-sight, but they must be within 10 metres (33
feet) of each other. The connection may be affected by obstructions such as walls or
other electronic devices.

This device is compliant with Bluetooth Specification 2.1 +EDR supporting the following
profiles: Headset Profile (HSP) 1.1, Handsfree Profile (HFP) 1.5. Check with the
manufacturers of other devices to determine their compatibility with this device.

Get started

Keys and parts

1 Charger connector
2 Indicator light
3 Microphone
4 Multifunction key
5 Earpiece
6 Earloop

Charge the battery

Before using the headset, you must charge the battery.

3

Warning:

Use only chargers approved by Nokia for use with this particular model. The use of any
other types may invalidate any approval or warranty, and may be dangerous. Use of
unapproved chargers may present a risk of fire, explosion, or other hazard.

1 Connect the charger to a wall outlet.
2 Connect the charger cable to the charger connector on the headset. The red indicator

light turns green when the battery is fully charged.

3 Disconnect the charger from the headset, then from the wall outlet.

When you unplug a charger, hold and pull the plug, not the cord.

The fully charged battery has power for up to 6 hours of talk time or up to 120 hours of
standby time.