Microsoft 95ME, 98ME User Manual

Operating Instructions Client Reference

Introduction..........................................................................................................................................7

How to Read This Manual...................................................................................................................9

Confirming a Network Environment................................................................................................11

Windows Configuration...................................................................................................................................12

Macintosh Configuration.................................................................................................................................18

UNIX Configuration........................................................................................................................................18

1. Windows 95/98/Me Configuration

Printing with a Print Server..............................................................................................................19

Printing with a Windows 2000, Windows XP or Windows NT 4.0 Print Server............................................19

Printing without Using a Print Server ..............................................................................................25

Configuring the Protocols................................................................................................................................25

Installing Software...........................................................................................................................................28

Printing with Parallel Connection....................................................................................................39

Installing the PCL 5c or RPCS Printer Driver.................................................................................................39

Installing the PostScript Printer Driver............................................................................................................41

Installing the Printer Driver Using USB..........................................................................................43

Windows 98/Me-Installing the Printer Driver Using USB..............................................................................43

Installing the Printer Driver Using IEEE 1394 ...............................................................................45

Printing with IP over 1394...............................................................................................................................45

Setting Up Options .............................................................................................................................47

Using Adobe PageMaker Version 6.0, 6.5 or 7.0.............................................................................50

Operating Instructions Client Reference

2. Windows 2000 Configuration

Printing with a Print Server..............................................................................................................51

Printing with a Windows 2000, Windows XP or Windows NT 4.0 Print Server............................................51

Printing without Using a Print Server ..............................................................................................57

Configuring the Protocols................................................................................................................................57

Installing Software...........................................................................................................................................60

Printing with Parallel Connection....................................................................................................72

Installing the PCL 5c or RPCS Printer Driver.................................................................................................72

Installing the PostScript Printer Driver............................................................................................................74

Installing the Printer Driver Using USB..........................................................................................77

Windows 2000-Installing the Printer Driver Using USB................................................................................77

Installing the Printer Driver Using IEEE 1394 ...............................................................................78

Printing with SCSI Print..................................................................................................................................78

Setting Up Options .............................................................................................................................82

3. Windows XP Configuration

Printing with a Print Server..............................................................................................................85

Printing with a Windows 2000, Windows XP or Windows NT 4.0 Print Server............................................85

Printing without Using a Print Server ..............................................................................................91

Configuring the Protocols................................................................................................................................91

Installing Software...........................................................................................................................................93

Printing with Parallel Connection..................................................................................................104

Installing the PCL 5c or RPCS Printer Driver...............................................................................................104

Installing the PostScript Printer Driver..........................................................................................................106

Installing the Printer Driver Using USB........................................................................................109

Windows XP-Installing the Printer Driver Using USB.................................................................................109

Operating Instructions Client Reference

Installing the Printer Driver Using IEEE 1394 .............................................................................110

Printing with SCSI Print................................................................................................................................110

Printing with IP over 1394.............................................................................................................................113

Setting Up Options ...........................................................................................................................115

4. Windows NT 4.0 Configuration

Printing with a Print Server............................................................................................................118

Printing with a Windows 2000, Windows XP or Windows NT 4.0 Print Server..........................................118

Printing without Using a Print Server ............................................................................................124

Configuring the Protocols..............................................................................................................................124

Installing Software.........................................................................................................................................128

Printing with Parallel Connection..................................................................................................139

Installing the PCL 5c or RPCS Printer Driver...............................................................................................139

Installing the PostScript Printer Driver..........................................................................................................141

Setting Up Options ...........................................................................................................................143

5. Macintosh Configuration

Mac OS..............................................................................................................................................145

Installing the Printer Driver and Software.....................................................................................................146

Mac OS X ..........................................................................................................................................154

Installing the PPD File...................................................................................................................................154

Setting Up the PPD File.................................................................................................................................155

Setting Up Options ........................................................................................................................................155

Configuring Macintosh....................................................................................................................156

Changing to EtherTalk...................................................................................................................................156

Configuring the Printer..................................................................................................................................157

Changing the Printer Name ...........................................................................................................................157

Changing the Zone.........................................................................................................................................158

Operating Instructions Client Reference

6. NetWare Configuration

Windows 95/98/Me ........................................................ ......... ..........................................................159

Windows 2000...................................................................................................................................162

Windows XP...................... ................................................................................................................165

Windows NT 4.0................................................................................................................................168

7. Software and Utilities Included on the CD-ROM

Software and Utilities Included on the CD-ROM.........................................................................171

Printer Drivers for This Printer......................................................................................................173

SmartNetMonitor for Admin..........................................................................................................176

SmartNetMonitor for Client............................................................................................................178

8. Setting up the Printer Driver and Canceling a Print Job

PCL 5c - Accessing the Printer Properties .....................................................................................181

Windows 95/98/Me - Accessing the Printer Properties.................................................................................181

Windows 2000 - Accessing the Printer Properties ........................................................................................183

Windows XP - Accessing the Printer Properties...........................................................................................187

Windows NT 4.0 - Accessing the Printer Properties.....................................................................................190

RPCS - Accessing the Printer Properties.......................................................................................194

Windows 95/98/Me - Accessing the Printer Properties.................................................................................194

Windows 2000 - Accessing the Printer Properties ........................................................................................197

Windows XP - Accessing the Printer Properties...........................................................................................200

Windows NT 4.0 - Accessing the Printer Properties.....................................................................................203

Operating Instructions Client Reference

PostScript 3 - Setting up for Printing.............................................................................................206

Windows 95/98/Me - Accessing the Printer Properties.................................................................................206

Windows 2000 - Accessing the Printer Properties ........................................................................................209

Windows XP - Accessing the Printer Properties...........................................................................................212

Windows NT 4.0 - Accessing the Printer Properties.....................................................................................215

Macintosh - Setting up for Printing...............................................................................................................218

Canceling a Print Job .......................................................................................................................220

Windows 95/98/Me, Windows 2000, Windows XP, Windows NT 4.0 - Canceling a Print Job ..................220

Macintosh - Canceling a Print Job.................................................................................................................221

9. Sample Print/Locked Print

Sample Print......................................................................................................................................222

Printing the Remaining Sets ..........................................................................................................................224

Deleting a Sample Print File..........................................................................................................................226

Checking the Error Log.................................................................................................................................228

Locked Print......................................................................................................................................230

Entering the Password ............................................................................. ......................................................232

Deleting the Locked Print File.......................................................................................................................234

Checking the Error log...................................................................................................................................236

10.Troubleshooting

Checking the Printer Status .................................................................... ......... ...............................238

SmartNetMonitor for Client ..........................................................................................................................238

Web Browser.................................................................................................................................................239

Operating Instructions Client Reference

11.Appendix

Color Guide.......................................................................................................................................240

Color Printing Basics.....................................................................................................................................240

Collate................................................................................................................................................243

INDEX.................................................................................................................................244

Operating Instructions Client Reference

Introduction

To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information before using this machine. It contains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Trademarks

AppleTalk, EtherTalk, LaserWriter, Macintosh are registered trademarks of Apple Computer, Inc. Ethernet is a registered trademark of Xerox Corporation. Microsoft, Windows, Windows NT are registered trademarks of Microsoft Corporation in the United

States and/or other countries. Novell, Ne tWare are registered trademarks of No vell, Inc. PostScript is a registered trademark of Adobe Systems, Incorporated. PowerPC is a registered trademark of International Business Machines Corporation. PCL is a registered trademark of Hewlett-Packard Company. Other product names used here in are f or i dent if ic at ion purposes only and might be trad emarks of their

respective companies. We disclaim any and all rights in those marks. The proper names of the Windows operating systems are as follows:

• The product name of Windows

• The product names of Windows Microsoft Microsoft

• The product names of Windows Microsoft Microsoft Microsoft

Windows® XP Professional

Windows® XP Home Edition

Windows® 2000 Advanced Server

Windows® 2000 Server

Windows® 2000 Professional

95 is Microsoft® Windows 95.

98 is Microsoft® Windows 98.

Me is Microsoft® Windows Millennium Edition (Windows Me).

XP are as follows:

2000 are as follows:

Operating Instructions Client Reference

• The product names of Windows NT® 4.0 are as follows: Microsoft

• Microsoft

Windows NT® Server 4.0

Windows NT® Workstation 4.0

Operating Instructions Client Reference

How to Read This Manual

Symbols

In this manual, the following symbols are used:

WARNING:

This symbol indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury.

CAUTION:

This symbol indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property.

* The statements above are notes for your safety.

Important

If this instruction is not followed, paper might be misfed, or data might be lost. Be sure to read this.

Preparation

This symbol indicates the prior knowledge or preparations required before operating.

Note

This symbol indicates precautions for operation, or actions to take after misoperation.

Limitation

This symbol indicates numerical limits, functions that cannot be used together, or conditions in which a particular function cannot be used.

Reference

This symbol indicates a reference.

Operating Instructions Client Reference

[]

Keys that appear on the machine's panel display. Keys and buttons that appear on the computer's display.

{}

Keys built into the machine's control panel. Keys on the computer's keyboard.

Operating Instructions Client Reference

Confirming a Network Enviro nment

Windows 2000, Windows XP, Windows NT (Server)

NetWare (Server)

Windows 95/98/Me

Windows 2000

Windows XP

Windows NT

NetWare (Client)

Macintosh

UNIX

❖❖❖❖ Connecting Printer and Computer

• Network connection (Ethernet cable, IEEE 1394 cable (IP over 1394), IEEE 802.11b (Wireless LAN))

• Parallel connection (parallel cable)

• USB connection (USB cable)

• IEEE 1394 (SCSI print) connection (IEEE 1394 cable)

Windows Configuration

❖❖❖❖ Connecting a Print Server

Windows 2000, Windows XP and

Print Server

Windows NT 4.0 Print Server

Operating Instructions Client Reference

Windows 95/98/Me

Windows 2000

Windows XP

• See p.19 “Printing with a Print Server” in "Windows 95/98/Me Configuration".

• See p.51 “Printing with a Print Server” in "Windows 2000 Configuration".

• See p.85 “Printing with a Print Server” in "Windows XP Configuration".

• See p.118 “Printing with a Print Server” in "Windows NT 4.0 Configuration".

Windows NT 4.0

❖❖❖❖ Network Connection

• Ethernet, IEEE 1394 (IP over 1394)

Operating Instructions Client Reference

Windows 95/98/Me

Windows 2000

Windows XP

Windows NT 4.0

Macintosh

• IEEE 802.11b

Operating Instructions Client Reference

❖ad hoc mode

❖infrastructure mode

access point

Operating Instructions Client Reference

❖❖❖❖ Interface supported protocols

Interface

Ethernet IEEE 802.11b IEEE 1394

(IP over 1394)

Protocol TCP/IP ❍❍❍

NetBEUI ❍❍× NetWare ❍❍ AppleTalk ❍❍×

❍ means that the protocol is supported. × means that the protocol is not supported.

If the optional 802.11b Interface Unit Type A has been installed, you cannot use the ad hoc mode.

• See p.25 “Printing without Using a Print Server” in "Windows 95/98/Me Configuration".

• See p.57 “Printing without Using a Print Server” in "Windows 2000 Configuration".

• See p.91 “Printing without Using a Print Server” in "Windows XP Configuration".

• See p.124 “Printing without Using a Print Server” in "Windows NT 4.0 Configuration".

❖❖❖❖ Parallel Connection

• See p.39 “Printing with P arallel Connection” in "Windows 95/ 98/ Me Configuration".

• See p.72 “Printing with P arallel Connection” in "Windows 2000 Configuration".

• See p.104 “Printing with Parallel Connection” in "Windows XP Configuration".

• See p.139 “Printing with Parallel Connection” in "Windows NT 4.0 Configuration".

Operating Instructions Client Reference

❖❖❖❖ USB Connection

• See p.43 “Installing the Printer Driver Using USB” in "Windows 95/ 98/ Me Configuration".

• See p.77 “Installing the Printer Driver Using USB” in "Windows 2000 Configuration".

• See p.109 “Installing the Printer Driver Using USB” in "Windows XP Configuration".

Windows 95/98/Me Windows 2000 Windows XP Windows NT 4.0

Operating Instructions Client Reference

❖❖❖❖ IEEE 1394 Connection

• See p.45 “Installing the Printer Driver Using IEEE 1394” in "Windows 95/ 98/ Me Configura-

tion".

• See p.78 “Installing the Printer Driver Using IEEE 1394” in "Windows 2000 Configuration".

• See p.110 “Installing the Printer Driver Using IEEE 1394” in "Windows XP Configuration".

SCSI prin

❖❖❖❖ Connecting a NetWare Server

See p.159 “NetWare Configuration”.

Operating Instructions Client Reference

Macintosh Configuration

See p.145 “Macintosh Configuration”.

UNIX Configuration

Concerning UNIX printing information, please visit our Web site or consult your authorized reseller.

Operating Instructions Client Reference

1. Windows 95/98/Me Configuration

Printing with a Print Server

Printing with a Windows 2000, Windows XP or Windows NT 4.0 Print Server

This section describes the procedures for setting up a client on a net work that uses Windows 2000, Windows XP, Windows NT 4.0 as a print server.

To print from Windows 95/98/Me, you must i nstal l the print er dri ver and change t he prin ter po rt to the print server.

Windows 2000 Windows XP Windows NT 4.0 Print Server

Operating Instructions Client Reference

Installing the PCL 5c or RPCS Printer Driver

Preparation

To use the print server, install the printer driver by selecting "Network printer server", and then select the Windows 2000, Windows XP or Windows NT 4.0 shared printer. For more information about how to install and setting, see the Administrator Reference.

This section assume s tha t the c lient has already been configured to communi ca te wi th a Wi nd ows 2000, Windows XP or Windows NT 4.0 print se rver. Do not begin the followi ng proced ure until the client has been set up and configured correctly.

AAAA

Close all applications that are running.

BBBB

Insert the CD-ROM into the CD-ROM drive.

Auto Run will start the installer.

Important

❒ Never have two versions of the same printer driver installe d on your system at the same time.

When upgrading to a new version of the printer driver, delete the old version, and then install the new one.

Note

❒ Auto Run might not automatically work with certain OS settings. In this case, launch "Setup.exe"

located on the CD-ROM root directory.

CCCC

Select a language to change the interface language, and then click [OK].

The following languages are available: Cestina (Czech), Dansk (Danish), Deutsch (German), English (English), Espanol ( Spanish), Franc ais (Fr ench), It aliano (Itali an), Magyar (Hungari an), Nederlands (Dutch), Norsk (Norwegian), Polski (Polish), Portugues (Portuguese), Suomi (Finnish), Svenska (Swedish)

Operating Instructions Client Reference

DDDD

Select [PCL/RPCS Printer Drivers].

EEEE

The software license agreement appears in the [License Agreement] dialog box.

After reading through all of the contents, click [I accept the agreement] to agree with the license agreement, and then click [Next].

FFFF

Select a printer drivers you want to use when the "Printer Program" dialog box appears.

You can select more than one printer driver.

GGGG

Check [Printer Name] to select the model(s) of printer you want to use.

To change the printer name, change it in the [Change settings for 'Printer Name'] box.

HHHH

Double-click the printer name to display the printer settings.

Note

❒ The details shown for [Comment:], [Driver:], and [Port:] vary depending on the operating system

being used, the model of printer selected, and the port being used.

IIII

Select [Port:], and then click [Add].

JJJJ

Select [Network Printer], and then click [OK].

KKKK

Double-click the computer name you want to use as a print server i n the "Browse for Printe r" window.

LLLL

Select the printer you want to use, and then click [OK].

MMMM

Make sure the location for th e selected printer is shown after [Port:].

Operating Instructions Client Reference

NNNN

Configure the User Code and default printer as necessary.

❖❖❖❖ User Code

The procedure to specify the "User Code" may differ depending on the printer language.

• RPCS You can specify the "User Code" when installing the printer driver. You cannot register or edit the "User Code" from the Printer Driver dialog box. To change the "User Code", you must uninstall the printer driver, and then register the new "User Code" during the re-install process.

• PCL 5c You can specify the "User Code" with the Printer Driver Properties after installing the printer driver. See printer driver's Help.

❖❖❖❖ Default Printer

Check [Default Printer] to set the printer as the default printer.

OOOO

Click [Continue] to start printer driver installation.

PPPP

When the [Select Program] dialog box appears, click [Finish].

QQQQ

When the installation completion dialog box appears, click [Finish].

RRRR

Set up the o ptions.

Note

❒ You must set up the opt ion s when the bi dir e cti ona l t ra ns miss io n i s dis ab led . F or m or e i nfor m a-

tion about the status of the bidirectional transmission, see p.47 “Bidirectional transmission”.

Reference

For more information about option settings, see p.47 “Setting Up Options”.

Operating Instructions Client Reference

Installing the PostScript Printer Driver

AAAA

Close all applications that are running.

BBBB

Insert the CD-ROM into the CD-ROM drive.

Auto Run will start the installer.

Important

❒ Never have two versions of the same printer driver installe d on your system at the same time.

When upgrading to a new version of the printer driver, delete the old version, and then install the new one.

Note

❒ Auto Run might not automatically work with certain OS settings. In this case, launch "Setup.exe"

located on the CD-ROM root directory.

CCCC

Select a language to change the interface language, and then click [OK].

Note

❒ The printer driver with the selected language will be installed. The printe r drive r wil l be ins tal led

in English if you select the following languages: Cestina, Magyar, Polski, Portugues, Suomi

DDDD

Click [PostScript 3 Printer Driver].

"Add Printe r Wizard" starts.

Operating Instructions Client Reference

EEEE

Click [Next].

FFFF

Click [Network printer], and then click [Next].

GGGG

Click [Browse].

HHHH

Double-click the computer name you want to use as a print server i n the "Browse for Printe r" window.

IIII

Select the printer you want to use, and then click [OK].

JJJJ

After confirming that the lo cation for the selected printer shown, click [Next].

KKKK

Change the name of the printer if you want, and then click [Next].

Configure the default printer as necessary. Check [Yes] to set the printer as the default printer.

LLLL

Select whether or not you want to print a test page, and then click [Finish].

The installation is complete.

Note

❒ You can specify the "User Code" with the Printer Driver Properties after installing the printer driv-

er. See printer driver's Help.

Reference

For more information about option settings, see p.47 “Setting Up Options”.

MMMM

Restart the computer.

Operating Instructions Client Reference

Printing without Using a Print Server

Preparation

To use a printer connected to the Ethernet interface, IEEE 802.11b (Wireless LAN) interface or IEEE 1394 (IP over 1394) interface, select "SmartNetMonitor" when installing the printer driver.

Configuring the Protocols

Configuring TCP/IP and IPP for Printing

Follow these instructions to configure the printer and Windows 95/98/Me to use the TCP/IP protocol and IPP.

❖❖❖❖ Configuring the printer

Configure the printer to use the TCP/IP protocol.

• Confirm that the TCP/IP protocol is set to be active. (The factory default is active.)

• Assign an IP address and make other settings required for using the TCP/IP protocol.

Reference

For more information about how to make the above settings, see “Configuring the printer for the Network” in the Quick Installation Guide.

If DHCP is used to assign IP addresses, see Appendix, “When Using DHCP” in the Administrator Reference.

Under Windows Me, when you want to use the IP over 1394, see the Option Setup Guide.

Operating Instructions Client Reference

Note

❒ After setting the IP address, use the ping command to confirm that it has been set correctly.

Windows 95/98

Click [Start], point to [Programs], and then click [MS-DOS Prompt]. Windows Me

Click [Start], point to [Programs], point to [Accessories], and then click [MS-DOS Prompt]. Type the following: (Example IP address is 192.168.15.16)

C:> ping 192.168.15.16

If the address has been configured correctly, the following message appears.

Reply from 192.168 .1 5. 16 : by te s=3 2 ti me <1 0ms TTL =3 2

If the address has been configured incorrectly, the following message appears.

Request timed out.

❖❖❖❖ Configuring a Windows 95/98/Me computer

Follow these steps to configure a Windows 95/98/Me computer to use the TCP/IP protocol.

A Open [Control Panel] and double-c lick the [Network] icon. Confirm that “TCP/IP” is listed in the

[The following network components are installed:] box under the [Configuration] tab.

Note

❒ If the TCP/IP protocol is not installed, click [Add] under the [Configuration] tab and install it. For

more information about installing the TCP/IP protocol, see Windows 95/98/Me Help.

❒ Under Windows Me, if you want to use IEEE 1394 (IP over 1394) interface, make sure TCP/IP

is bound to the IEEE 1394 adaptor being used. The following message will be displayed:

TCP/IP -> (IEEE 1394 adap to r in use)

B Configure the TCP/IP protocol with the appropriate IP address, subnet mask and other settings.

Confirm th at the settings are cor rect with the network administrator.

Operating Instructions Client Reference

Configuring NetBEUI for Printing

Follow these instruc tions to co nfigure the printer a nd Windows 95/98/ Me to use the NetBEUI protoco l.

Limitation

❒ To use NetBEUI, use the SmartNetMonitor for Client port.

❖❖❖❖ Configuring the printer

Configure the printer to use the NetBEUI protocol.

• Confirm that the NetBEUI protocol is set to be active. (The factory default is active.)

Reference

For more information about how to make the above settings, see “Configuring the printer for the Network” in the Quick Installation Guide.

❖❖❖❖ Configuring a Windows 95/98/Me computer

Install the NetBEUI pr otocol on the Windows 9 5/9 8/Me comput er an d set it as the d efaul t p rotoco l.

A Open [Control Panel] and double-click the [Network] icon. Conf irm th at “NetBEUI” is listed in

the [The following network components are installed:] box under the [Configuration] tab.

Note

❒ If the NetBEUI protoco l is not installe d, cli ck [Add] und er the [Configuration] tab and install it.

For more information about installing the NetBEUI protocol, see Windows 95/98/Me Help.

❒ If “NetBEUI - >Dial-Up Adap tor” is listed in the [

box, select it, and then click [

B Set the NetBEUI protocol as the default protocol. Click the [Configuration] tab, select “Net-

Remove

] to remove the binding.

The following network components are installed:

BEUI” in the [The following network components are installed:] box, and then click [Properties].

C Click the [Advanced] tab, sele ct [Set this protocol to be the default protocol], and then click [OK]. D Click [OK] to close the [Network] dialog box. E Wh en the message to restart appears, click [Yes].

]

Operating Instructions Client Reference

Installing Software

Preparation

If you are not u sing the print se rver, in stall Sma rtNetMoni tor for Cl ient, and then in stall th e printer driver by selecting "SmartNetMonitor for Client". This enables peer-to-peer network printing with the TCP/IP, NetBEUI, or IPP protocol.

Note

❒ Under Windows Me, you can print using TCP/IP and the IEEE 1394 (IP over 1394) interface.

Installing SmartNetMonitor for Client

AAAA

Close all applications that are running.

BBBB

Insert the CD-ROM into the CD-ROM drive.

Auto Run will start the installer.

Important

❒ Never have two versions of the same printer driver installe d on your system at the same time.

When upgrading to a new version of the printer driver, delete the old version, and then install the new one.

Note

❒ Auto Run might not automatically work with certain OS settings. In this case, launch "Setup.exe"

located on the CD-ROM root directory.

Operating Instructions Client Reference

CCCC

Select a language to change the interface language, and then click [OK].

DDDD

Click [SmartNetMonitor for Client / Admin].

EEEE

Click to sel ect [SmartNetMonitor for Client], and then click [Next >].

FFFF

Follow the instructions on the screen.

Note

❒ If you are required t o restart the compute r after the installa tion of SmartNetMonito r for Admin,

restart the computer and continue with necessary configurations.

Installing the PCL 5c or RPCS Printer Driver

AAAA

Close all applications that are running.

BBBB

Insert the CD-ROM into the CD-ROM drive.

Auto Run will start the installer.

Important

❒ Never have two versions of the same printer driver installe d on your system at the same time.

When upgrading to a new version of the printer driver, delete the old version, and then install the new one.

Note

❒ Auto Run might not automatically work with certain OS settings. In this case, launch "Setup.exe"

located on the CD-ROM root directory.

Operating Instructions Client Reference

CCCC

Select a language to change the interface language, and then click [OK].

DDDD

Select [PCL/RPCS Printer Drivers].

EEEE

The software license agreement appears in the [License Agreement] dialog box.

After reading through all of the contents, click [I accept the agreement] to agree with the license agreement, and then click [Next].

FFFF

Select a printer drivers you want to use when the "Printer Program" dialog box appears.

You can select more than one printer driver.

GGGG

Check [Printer Name] to select the model(s) of printer you want to use.

To change the printer name, change it in the [Change settings for 'Printer Name'] box.

HHHH

Double-click the printer name to display the printer settings.

Note

❒ The details shown for [Comment:], [Driver:], and [Port:] vary depending on the operating system

being used, the model of printer selected, and the port being used.

+ 218 hidden pages