Microsoft 10.2, 9.18, 10.1, 9.19, 9.21 User Manual

P3PC-3942-01ENZ0

TWAIN Driver

Scanner Utility for Microsoft® Windows®

Version 9.18 / 9.19 / 9.21 / 10.10 /10.20

User's Guide

Introduction

Thank you for purchasing the "Scanner Utility for Microsoft® Windows® ".

This software contains a TWAIN-compliant image scanner driver (simply called "driver" in this guide) and utilities.

This guide provides a description summary of the driver, as well as a description of the installation method and procedures for appropriate use. Please read this guide before starting to use the software.

In addition, refer to the [Read Me] file located in [Start] Menu - [All Programs] - [Scanner Utility for Microsoft Windows] for the latest information not included in this manual.

In this guide, product names are abbreviated as follows:

Windows® 2000

Windows

Windows® XP Professional x64 Edition operating system

Windows Server

Windows Server® 2003, Standard Edition operating system

Windows Server

Windows Server® 2003 R2, Standard x64 Edition operating system

Windows Server

Windows Vista

Windows Vista® Business operating system (32/64 bit)

Windows Vista

Windows

2000 Professional operating system

XP Home Edition operating system

XP Professional operating system

2003

2003, Standard x64 Edition operating system

2003 R2, Standard Edition operating system

2008

2008 Standard operating system (32/64 bit)

2008 R2 Standard operating system

Home Basic operating system (32/64 bit)

Home Premium operating system (32/64 bit)

Enterprise operating system (32/64 bit)

Ultimate operating system (32/64 bit)

7 Home Premium operating system (32/64 bit)

7 Professional operating system (32/64 bit)

7 Enterprise operating system (32/64 bit)

7 Ultimate operating system (32/64 bit)

When "Windows® 2000," "Windows® XP," "Windows Server® 2003," "Windows Server® 2008," "Windows Vista referred to as "Windows 2000," "Windows

Vista

" and "Windows® 7" collectively.

Trademarks

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.

Intel, MMX, Pentium are registered trademarks of Intel Corporation.

Adaptec is a registered trademark of Adaptec Inc.

EZ-SCSI is a trademark of Adaptec Inc.

Other product names are the trademarks or registered trademarks of the respective companies.

" and "Windows® 7" are referred to collectively, they are simply

". Unless otherwise indicated, explanations refer to "Windows®

XP," "Windows Server® 2003," "Windows Server® 2008," "Windows

[High Risk Activity] The Customer acknowledges and agrees that the Product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, personal use, household use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, severe physical damage or other loss (hereinafter "High Safety Required Use"), including without limitation, nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system. The Customer, shall not use the Product without securing the sufficient safety required for the High Safety Required Use. In addition, PFU shall not be liable against the Customer and/or any third party for any claims or damages arising in connection with the High Safety Required Use of the Product.

Organization

This manual explains how to install and use this driver, and how to use the TWAIN scanning utility.

• Installation

This section explains the procedure for installing the environments in which this driver may operate.

• Using the Driver

This section explains how to use the driver.

• Using the Gamma Pattern Editor

This section explains how to use the Gamma Pattern Editor.

• Using the Scanners and Cameras This section explains about the property of “Scanners and Cameras”

• Troubleshooting

This section explains the possible causes of error messages and operation errors and the corresponding recommended actions.

• Appendix

The appendix contains the specifications of image scanners.

iii

Contents

1. Outline .................................................................................................... 1

1.1 Characteristics of this Driver .............................................................................. 1

1.2 Operating Environment ...................................................................................... 1

1.3 Explanatory Notes ............................................................................................. 2

1.4 Explanation of terms .......................................................................................... 3

2. TWAIN .................................................................................................... 4

2.1 TWAIN ............................................................................................................... 4

2.2 TWAIN Application ............................................................................................. 5

3. Installation .............................................................................................. 6

3.1 Preparation ........................................................................................................ 6

3.2 Installing the Scanner Driver .............................................................................. 7

3.3 Uninstall ........................................................................................................... 12

4. Using the Driver ................................................................................... 13

4.1 Selecting the Driver ......................................................................................... 13

4.2 Screen Configuration ....................................................................................... 13

4.2.1 Linkage to I

4.3 Displaying Driver Information ........................................................................... 15

4.4 Setting Information on Image Scanning ........................................................... 16

4.5 Specifying Driver Operation ............................................................................. 31

4.6 Setting "Scanning Area" .................................................................................. 33

4.7 Setting Options ................................................................................................ 34

mage Processing Software Option ........................................................ 14

4.7.1 Rotation ................................................................................................................... 35

4.7.2 Job/Cache

4.7.3 Generic .................................................................................................................... 50

4.7.4 Imprinter (Endorse)

4.7.5 Start Up

4.7.6 Filter

4.7.7 Compression ............................................................................................................ 67

................................................................................................................ 43

.................................................................................................. 51

.................................................................................................................... 56

......................................................................................................................... 63

4.8 Setting Advance Options ................................................................................. 68

4.8.1 Gray ......................................................................................................................... 69

4.8.2 Image Filter

4.8.3 DTC ......................................................................................................................... 75

4.8.4 When Color (/Grayscale) is spe

.............................................................................................................. 73

cified ...................................................................... 79

4.9 Setting the Setting Manager Options ............................................................... 86

4.10 Basic Scan Dialog ....................................................................................... 89

4.11 Download Pattern File ................................................................................. 91

5. Using the Gamma Pattern Editor ......................................................... 95

5.1 Start-up ............................................................................................................ 95

5.2 [File] menu ....................................................................................................... 96

5.3 [Help] menu ..................................................................................................... 96

5.4 Gamma Pattern Editing ................................................................................... 97

6. Setting Scanner and Camera Properties ............................................. 98

6.1 Displaying Scanner and Camera Properties .................................................... 98

6.2 General Tab ..................................................................................................... 98

6.3 Events Tab ...................................................................................................... 99

6.4 Diagnostic Tab ............................................................................................... 101

6.5 Device Information Tab .................................................................................. 102

6.6 Device Setup Tab .......................................................................................... 103

6.7 About Tab ...................................................................................................... 109

6.8 Color Management Tab ................................................................................. 109

6.9 Scanning by using “Scanner and Camera Wizard” ........................................ 110

7. Troubleshooting .................................................................................. 113

7.1 Error Messages ............................................................................................. 113

7.1.1 Messages fr

7.1.2 Error messages relating

om the TWAIN Driver ......................................................................... 113

to gamma correction pattern editing ............................... 124

7.2 Device Trouble Related to Operation ............................................................. 125

7.3 Device Trouble Related to Installation ........................................................... 126

8. Appendix ............................................................................................ 127

8.1 Relevant Image Scanner Specification .......................................................... 127

8.2 Maintenance Service ..................................................................................... 192

1. Outline

1.1 Characteristics of this Driver

• This driver complies with TWAIN regulations V2.1, which are global standards for

image scanners. The driver can be used in all TWAIN-compliant applications.

• This driver also supports an image scanner that has the "double-sided scan" function. If

the application supports continuous scan, a double-sided document can be scanned.

1.2 Operating Environment

This driver can be used in the following systems:

[SCSI connection]

• A personal computer on which one of the following operating systems are installed

− Windows

− Windows Vista

− Windows

*Some models are not supported in Windows

• Adaptec

2000

Server® 2003

Server® 2008

SCSI adapter or FUJITSU FMV SCSI adapter

2000.

− In some cases, the driver may not operate with the above systems. Please check in

advance with your place of purchase.

− Notes are provided on the accepted SCSI adapters in the following web page, which is

included in the installation media. Please read these notes before use.

http://www.fujitsu.com/global/support/computing/peripheral/scanners/scsi/index.html

• This driver has the following hardware requirements:

− CD/DVD drive (required for installation)

− Mouse (recommended)

[USB connection]

• A personal computer on which one of the following operating systems are installed

− Windows

− Windows Vista

− Windows

*Some models are not supported in Windows

2000

Server® 2003

Server® 2008

2000.

• USB port

• CD/DVD drive (required for installation)

• Mouse (recommended)

1.3 Explanatory Notes

The descriptions in this manual are prepared based on the following rules:

◊ Menus and buttons

The menus and buttons used in the program description are enclosed in [ ].

Example: [File] menu [OK] button

◊ Keyboard

The keytop indications comply with the standard keyboard of the Fujitsu FMV series.

Major differences between the Fujitsu FMV keyboard and other keyboards are shown below.

FMV keytops Other possible keytops

Alt Previous screen, GRPH

Ctrl CTRL

Esc ESC

Enter Return,

Shift SHIFT

Back space Backspace, BS

F1 PF1, f-1

◊ Terms related to mouse operation

Terms related to major mouse operations are explained below.

Click: To press and release the mouse left button

Double click: To quickly press the mouse left button twice

Drag: Move the mouse while keeping the mouse left button pressed

◊ Notes on operation procedures

If some menus need to be operated in a certain order, the procedural order is described as follows:

[A] - [B] - [C]

In accordance with this description, operation [A] is executed first, followed by [B] and [C] in that order.

◊ Figures

Figures and screen operations in this guide refer to Windows when using other operating systems.

Note that the expressions may vary with the type of scanner connected.

1.4 Explanation of terms

◊ IPC option board

IPC-2/2D in this guide refers to the IPC-2 and IPC-2D image processing circuit.

IPC-3/3D in this guide refers to the IPC-3 and IPC-3D option board.

IPC-4D in this guide refers to the IPC-4D option board.

XP. They are also followed

2. TWAIN

2.1 TWAIN

TWAIN is the specification that defines the standard software protocol and application programming interface (API) for data exchange between a software application program and an image input device such as the image scanner.

[TWAIN development background]

In the past, development of a new scanner inevitably required the development of a compatible driver and a sample (demonstration) program exclusively designed for the new scanner. As the scanner is upgraded, the driver may need to be upgraded as well to maintain its compatibility with the upgraded scanner. Therefore, the use is most likely to be restricted to one specific scanner model to avoid the complication of learning new operation methods and replacing the peripheral driver, etc., involved in scanner replacement.

In view of the incompatibility among different scanners and peripheral equipment and the accompanying inconvenience, there was a demand for standardization of the related hardware and software, and TWAIN was established as a result.

The user may now choose among all the input devices and software (driver or application programs) conforming to the TWAIN standard, and configure a most suitable system for himself, without being restricted to the products of a certain series or a certain manufacturer.

2.2 TWAIN Application

TWAIN mainly applies to the following three software components:

 Application software

 Source manager

 Source

The components are related to each other as shown below.

(TWAIN.DLL / TWAIN_32.DLL / TWAINDSM.DLL, etc)

Application software

(photo retouching software, etc)

Source manager

Source

(Image scanner control of the driver, etc)

Image scanner, etc.

Figure TWAIN Application

3. Installation

3.1 Preparation

1. Make sure that the operating system (OS) is installed correctly.

2. In case of the SCSI connection, confirm that the SCSI adapter is connected to your PC and

operating correctly.

In case of the USB connection, confirm that the USB port is installed in your PC.

3. Confirm that the hard disk that is the installation destination has enough free space.

If TWAIN Driver version 9.20 or earlier is installed in your computer, uninstall it before installing a different version of TWAIN Driver. When uninstalling old versions, select [Control Panel] – [Add or

Remove Programs] on the [Start] menu and uninstall “Scanner utility for Microsoft Windows”. See Section "3.3 Uninstall (page 15)" described later.

4. Turn off your PC.

5. Connect the scanner to your PC.

3.2 Installing the Scanner Driver

The Windows® XP screen samples are shown below. The screen and operations will differ

slightly depending on the OS that is being used.

1. Turn on the scanner.

2. Turn on your PC and Log on to Windows

Log on as an administrator.

The scanner may be detected automatically, and the "Found New Hardware Wizard" or

“Found New Hardware” window is displayed.

In this case, click [Cancel] button to close this Wizard window.

(* Depending on the OS, the window displayed differently.)

In case of Windows® 2000

In case of Windows® XP, Windows Server® 2003

In case of Windows Vista®, Windows Server® 2008 and Windows

3. Insert the Setup DVD-ROM or Setup CD-ROM into the disk drive.

<SETUP DISK START UP SCREEN> is displayed.

This Dialog is not displayed automatically when the "Auto play" setting of the disk drive on

your PC is off.

In this case, please run “AutoPlayer.exe” in this Setup DVD-ROM or Setup CD-ROM

directly using “Explore” or “My computer”.

The window “Windows needs your permission to continue” may appear for Windows Vista®,

Windows Server® 2008 and Windows® 7. Click [Continue] button.

4. Click [INSTALL (Custom)].

(* Depending on the scanner model, the different screen may appear.)

5. Click [TWAIN Driver]

(* Depending on the scanner model, the different screen may appear.)

Depending on the scanner model, the screen which confirms whether “Error Recovery

Guide” and "Image Processing Software Option" are installed or not is displayed.

In this case, click [OK] button, and install Error Recovery Guide.

6. Follow the instructions on the screen to complete the installation.

(* Restarting the PC is necessary for Windows Vista®, Windows Server® 2008 and Windows® 7.)

7. After the restart, the scanner is detected.

Depending on the OS, the following operations may be required.

In case of Windows

[Digital Signature not Found] is displayed, click [Yes] button.

2000

In case of Windows Windows Vista

1) [Found New Hardware Wizard] is displayed, click [Next >] button.

XP/ Windows Server® 2003/ Windows Server® 2008/

/ Windows® 7

Following operation is required for Windows Vista®, Windows Server® 2008 and Windows

- The window “Window needs to install driver software...” will be displayed. Then select “Locate and install driver software (recommended)” in the dialog box.

- If the window “Window needs your permission to continue” is displayed, click “Continue” button.

2) If [Hardware Installation] is displayed, click [Continue Anyway] button.

For Windows Vista®, Windows Server® 2008 and Windows® 7, “Windows can’t verify the publisher of this driver software” will appear. Then select “Install this driver software anyway”.

For other than Windows Vista®, Windows Server® 2008 and Windows

For Windows Vista®, Windows Server® 2008 and Windows® 7

Some scanner models do not support this option. See "Relevant Image Scanner Specification" in the Appendix.

3) Click [Finish] button when the installation is finished.

Now, the installation of scanner driver is completed.

3.3 Uninstall

The uninstall process removes the software and returns the hard disk to its pre-installation state.

When you want to remove this scanner driver program from your PC, uninstall by the following procedures.

1. Turn on your PC and Log on to Windows

2. Close all of the applications on Windows®

3. Select [Control Panel] from [Start] menu.

 The [Control Panel] is displayed.

4. Double-click [Add/Remove Programs] from the icon list of the [Control Panel].

 The properties of [Add/Remove Programs] is displayed.

5. Select "Scanner Utility for Microsoft Windows (V**L**)" (* indicates the version

number) from the "Install/Uninstall" list.

6. Click [Add/Remove] button.

Log on as an administrator.

7. When the confirmation dialog is displayed, click [OK] button if you are ready to uninstall.

8. When uninstallation is completed, click [Finish] button.

Image files that have been scanned and saved will not be deleted.

If other TWAIN-compliant applications and drivers have been installed and you are asked

whether or not to delete files shared with them such as the TWAIN Manager, select [NO] to

avoid deleting them.

The screen and operations may differ slightly depending on the OS that is being used.

- [Add/Remove Programs]  [Add or Remove Programs]

- [Add/Remove] button  [Change/Remove] button

4. Using the Driver

4.1 Selecting the Driver

To use this driver from the TWAIN application, select "FUJITSU <Product ID>" from the TWAIN data source (driver) selection screen. For general application, the data source selection screen is displayed by selecting the [Select Scanner] or [Acquire ...] menu. Refer to the instruction manual for the application used for details.

4.2 Screen Configuration

Scanning Area settings

Preview window

Image scanner name

Setting file name

Message line

Figure Main Dialog

Data size

Button control

Image scan related data

4.2.1 Linkage to Image Processing Software Option

When the “Enable Software IPC” checkbox is marked after installation of “Image Processing Software Option” (sold separately or included as a standard function)*, there appears setting items of Image Processing Software Option in a part of the Setting Window for TWAIN Driver.

(*: Depending on the scanner, the option is installed together with the scanner driver. See "Relevant

Image Scanner Specification" in the Appendix.)

Mark this checkbox.

Setting items of “Image Processing Software Option” are displayed here. You can change the settings of Image Processing Software Option here.

• The “Image Processing Software Option” is required for settings on the window of TWAIN Driver.

• For details about the Image Processing Software Option, refer to the “Image Processing Software Option User’s Guide”.

The following pages contain the explanation and operation description for each part.

4.3 Displaying Driver Information

♦ Image scanner name

The model name, option port name, and capacity of internal scanner memory (in units of megabytes) of the connected image scanner are displayed.

If no image scanner is connected, this field is blank.

The type of IPC option board is displayed if an image-processing option board is installed in the scanner.

IPC-3/3D may not be detected normally, as it is affected by the version number of the machine type and device. In this case, "IPC2" is displayed.

♦ Preview window

Ruler

The preview window is used to display the temporary image of read data and for setting the "Scanning Area."

For settings, see "Scanning Area" later in this manual. Also see the description of the [Preview] button later in this manual.

♦ Ruler

The large divisions are labeled as "Unit". The scale also varies with the selected scanner.

♦ Message line

The message line is the bottom line of the dialog in which a brief explanation of an input item or a setting item is displayed when the mouse cursor is moved over the item.

♦ Data size

The approximate amount of data per image when data is scanned in the present option.

Note.

This value is the amount of uncompressed data. The size of the stored file will differ from this value and is usually smaller if image compression is chosen and the image is compressed.

4.4 Setting Information on Image Scanning

♦ Current side

When a scanner that allows duplex scanning is used, specifies the page which sets the image scanning information.

To scan using the same settings as those for "Front side" and "Back side," clear the checks in the "Individual Setting" checkbox on the "Front" and "Back" tabs. A single "Duplex" tab will be displayed at the left so that the same image scanning information can be set for "Front side" and "Back side."

To scan using different settings for "Front side" and "Back side," check the "Individual Setting" checkbox on the "Front" and "Back" tabs. Two tabs, "Front" and "Back," will be displayed at the left. Select each tab and enter the desired settings.

This is only effective when ADF (Duplex) is selected for the method of paper feed. For scanner types which permit duplex scanning, see "Relevant Image Scanner Specification" in the Appendix.

♦ Enable Multi Image

Multi image can scan the document once and output both a Color/Grayscale and a Binary B/W image.

Not all the scanners support Multi image. For details, please refer to “Specification” in the Appendix.

* This function can be used if “Ram cache” or “Use Both Memory” is selected.

If an item other than “Ram cache” or “Use Both Memory” has been selected in the “Cache Mode:” and this check box is marked, it will change to “Ram cache”.

* This function cannot be used when the [Split Image] function is enabled and vice versa.

* Depending on the scanner model, "Long page (Front Side)" and "Long page (Duplex)"

cannot be selected in the [Scan Type] drop-down list.

* "1200dpi" under [Resolution] cannot be selected.

* This function cannot be used when [Double-page spread] is selected and vice versa

(V9.21).

* This function may not work properly in some applications.

If this checkbox is checked, the following screen appears.

When “Multi Image Output” is selected When “Auto color Detection” is selected

- Output mode

Multi Image Output

One scan outputs both a Color/Grayscale and a Binary B/W image.

Auto color Detection

Outputs either a Color/Grayscale or a Binary B/W image depending on whether the document is color or black and white.

*The following documents may be recognized as black and white.

· Documents containing light colors

· Partly colored documents

· Two-color documents with a lot of dark colors similar to black (e.g. gray)

- Order (for Multi Image Output)

Specify the output order of images when scanning in Multi Image Output mode

Primary: Color/Grayscale Secondary: Binary

Output images in the order of “Color/Grayscale image”  “Binary B/W image”.

Primary: Binary Secondary: Color/Grayscale

Output images in the order of “Binary B/W image”  “Color/Grayscale image”.

- Select Current Side

When “Multi Image Output” is selected When “Auto color Detection” is selected

Select a side and then set the scanning options for it on the main dialog box accordingly.

When scanning in Multi Image Output mode

, set the scanning options for primary and

secondary as specified in the “Order” section.

When scanning in Auto color Detection mode

, pre-set the scanning options for

color/grayscale or black and white if detected.

You can use different "Rotation" settings for Multi Image Output and Auto Color Detection ("Multi Image" setting).

When you use the "Multi Image" function (Multi Image Output and Auto Color Detection) together with the "Filter" function (Page Edge Filter and Digital Endorser), the "Filter" setting is common to both Multi Image Output and Auto Color Detection. You cannot configure different "Filter" settings for each.

When you use the "Multi Image" function (Multi Image Output and Auto Color Detection) together with the "Dropout Color" function, the primary and seconday setting is common to both Multi Image and Dropout Color

♦ Carrier Sheet / Standard

[Carrier Sheet] and [Standard] tabs are displayed when [Double-page spread], [Clipping (Front)] or [Clipping (Duplex) is selected for [Scan Type].

Carrier Sheet

Configures the scan settings when performing a scan with the Carrier Sheet.

Standard

Configures the scan settings when performing a scan without using the Carrier Sheet.

♦ Resolution

Specifies the number of pixels (dots) per inch. Select a predefined resolution or [Custom] from the list. [Customize] enables detailed settings by a pixel unit.

* When you scan documents at a resolution of less than 150 dpi with [Double-page spread],

[Clipping (Front)] or [Clipping (Duplex)] selected for [Scan Type], the double-page spread or the cropping function may not work properly. In that case, set the resolution to 150 dpi or higher.

By marking [Predefine] checkbox, you can select one from three predefined settings as [Normal], [Better], [Best] to scan documents instead of configuring settings by yourself.

Otherwise, you can change the details of the predefined settings on the [Resolution Setting] window, which appears when you click on the […] button.

Resolutions for Image modes (“Color”, “Grayscale”, and “Black &White”) of the each predefined settings are changed corresponding to the selection of the Image Type.

* Click [Default] button to return the resolutions to the default value.

High resolution produces finer images, meanwhile requires more memory that leads to longer scanning time.

The supported resolution depends on the type of scanner and the options installed. Refer to "Relevant Image Scanner Specification" in the Appendix.

* When scanning with [Enable Multi Image] enabled, images with a resolution different

than the one specified in predefine may be output.

♦ Paper Size

Specifies a document size for scanning.

Select a standard size or [Custom] size (can be registered up to three) from the list.

* When you perform a scan in [Carrier Sheet] size with [Clipping (Front)] or [Clipping

(Duplex)] selected for [Scan Type], the image is output in Carrier Sheet size without being cropped.

Window for customizing the paper size will appear when you click on […] button besides the list. On this window, you can change the order of the paper size in the list.

[Custom] button : Used for configuration of a custom size.

[Up] button : Used for shifting the order of the selected document size upward.

[Down] button : Used for shifting the order of the selected document size downward.

You can register up to three sizes as the customized document sizes.

[Custom Paper Size Setting] window will appear when you click the [Custom] button. Enter the size of the document to be scanned. (When entering the size, specify the paper size by width x length to the scanning direction.)

Some paper sizes may not be accepted by your device. Refer to "Relevant Image Scanner Specification" in Appendix.

Name :

Enter the name of the customized setting to be displayed in the list.

Width, Length :

To specify a custom paper size, use the scroll bar or enter the paper size directly. The unit specified in [Option]-[Generic]-[Unit/Scaling] will be applied to the unit in this window.

♦ Scanning Area

Specifies the start position, width and length for the image scan. The maximum allowable size is the paper size selected previously.

In addition, the minimum size is 1.000 inch, 26 millimeters, or pixels (number of dots per inch) according to the unit that has been set.

"Left": The left end of the scan area on the scanned document (X coordinate)

"Top": The top end of the scan area or the scanned document (Y coordinate)

"Width": The width of the scan area

"Length": The length of the scan area

These values are related to one another in the following way:

0 ≤ left end coordinate < (paper width - minimum scan area size)

0 ≤ top end coordinate < (paper length - minimum scan area size)

Minimum value ≤ width ≤ (paper width - left end coordinate)

Minimum value ≤ length ≤ (paper length - top end coordinate)

♦ Scan Type

Selects the feeding device. The image scanner uses a document bed called the flat bed as well as an automatic document feeder (ADF) for feeding scanned document. The ADF usually enables the documents to be scanned only once. The flat bed allows scanning the same documents repeatedly.

Flat bed

Scans a document placed on the flat bed of the device.

ADF (Front Side)

Scans the documents on the device's automatic document feeder (ADF). Here, only the front sides are scanned.

ADF (Duplex)

To scan both the front and the back of a page, select this option. If this option is selected, the documents are scanned in the "front to back to front to back ..." order.

This option can be used only for scanner models that support duplex scanning. The "Duplex Function" requires that the calling application supports "continuous scan." If the application does not support "continuous scan," only the data for the front side of the page is passed to the application. Some scanner models do not support this option. See "Relevant Image Scanner Specification" in the Appendix.

ADF (Virtual Duplex)

When you use a simplex scanner, this function automatically sorts the scanned pages in the correct order after scanning the front of the pages loaded in the ADF first, and then the back sides in succession.

Example: when you scan 2 double-sided sheets (4 pages)

Scanning order Output order Front side of the first sheet (1

Front side of the second sheet (3

Back side of the second sheet (4th page) Front side of the second sheet (3

Back side of the first sheet (2

* This function is available for fi-6750S.

page) Front side of the first sheet (1

page) Back side of the first sheet (2

page) Back side of the second sheet (4th page)

page)

Long page (Front Side)

Scans a document longer than the paper size which can be specified by [Paper Size]. In this case, only the front sides of documents are scanned. When this option is selected, the "Long Page Paper Size Setting" dialog box opens. Specify the size of the document to be scanned.

* While the "Long page" is specified, the preview window cannot be displayed and the

scanning area cannot be specified.

* In case of some scanner models, while the "Long page" is specified, color and

grayscale settings can not be selected in [Image mode]. (Refer to “Relevant Image Scanner Specification” in the Appendix.)

* In case of some scanner models, there may be a limit on the maximum [Resolution]

value that can be specified.

* The "Long page" is not displayed in the [Scan Type] dropdown list if not supported

by the device. See "Relevant Image Scanner Specification" in the Appendix.

* When the scan size is increased, more memory space is consumed. If a scan cannot be

performed due to insufficient memory, refer to “Insufficient memory. (DS41001)” in “Troubleshoo

ting.

Long page (Duplex)

Scans a document longer than the paper size which can be specified by [Paper Size]. If this option is selected, the documents are scanned in the "front to back to front to

back…" order.

* While the "Long page" is specified, the preview window cannot be displayed and the

scanning area cannot be specified.

* In case of some scanner models, while the "Long page" is specified, color and

grayscale settings cannot be selected in [Image mode]. (Refer to “Relevant Image Scanner Specification” in the Appendix.)

* In case of some scanner models, there may be a limit on the maximum [Resolution]

value that can be specified.

* The "Long page" is not displayed in the [Scan Type] dropdown list if not supported by

the device. See "Relevant Image Scanner Specification" in the Appendix.

* When the scan size is increased, more memory space is consumed. If a scan cannot be

performed due to insufficient memory, refer to “Insufficient memory. (DS41001)” in “Troubleshoo

ting.

ADF (Back Side)

Scans the documents on the device's automatic document feeder (ADF). Here, only back sides are scanned.

Double-page Spread

Select this scan type to scan a document larger than A4 size and have the front and back side images automatically merged, by folding the document in half and placing it in a Carrier Sheet.

*Some functions are not supported when you perform scanning using "Double-page Spread".

Clipping (Front)

Select [Clipping (Front)] to scan in simplex mode documents that can be damaged easily, or documents that are difficult to load such as newspaper clippings using the Carrier Sheet.

* Some functions are not supported when you perform scanning using [Clipping

(Front)].

Clipping (Duplex)

Select [Clipping (Duplex)] to scan in duplex mode documents that can be damaged easily, or documents that are difficult to load such as newspaper clippings using the Carrier Sheet.

* Some functions are not supported when you perform scanning using [Clipping

(Duplex)].

Some scanner models do not support this option. See "Relevant Image Scanner Specification" in the Appendix.

Note.

To specify duplex scanning, the number of copies designated should be based on the number of pages, not the number of paper sheets. In other words, one original with a front and back is regarded as two pages.

+ 170 hidden pages