Microsoft B4E-00025, 882224237789 User Manual
english
3
Thanks for choosing the Xbox 360
Wireless Headset. The headset’s
small size, wireless design, and
noise-cancelling microphone allows
you to conveniently chat with and
send voice messages to other
gamers—both in-game and out-ofgame—as well as use voice
commands in games that support
voice-command functionality.
To use this product, you need an
Xbox Live® membership. For more
information about Xbox Live, see
your Xbox 360 Set-up manual
(Volume 1). The Xbox 360 Wireless
Headset is for use exclusively with
the Xbox 360™ video game and
entertainment system.
Your new headset gives you:
• 2.4-GHz wireless technology with
up to 9-metre (30-feet) range.
• Up to 8 hours of play per full
battery charge.
• Audible low-power warnings.
• Earpiece volume and microphone
mute controls.
• Battery gauge accessible from
the Xbox Guide.
To enhance your experience with the
wireless headset, try the Xbox 360
Wireless Controller. If you’re looking
to expand your wireless experience,
consider purchasing the Xbox 360
Universal Media Remote and the Xbox
360 Wireless Networking Adapter.
Before using this product, read this
manual and the Xbox 360 console
manuals for important safety and
health information. Keep all
manuals for future reference.
For replacement manuals, go to
www.xbox.com/support or call
Xbox Customer Support (see “If
You Need More Help”).
!
wARNINg
ENGLISH
Xbox 360 Wireless Headset
4
english
The limited warranty covering this
product is contained in the Xbox 360
Warranty manual (Volume 2) and
is available online at
www.xbox.com/support.
!
Electrical Safety
As with many other electrical devices, failure to take the following
precautions can result in serious injury or death from re or damage to
the wireless headset.
•
Use only the headset charging cable that came with your wireless
headset or that you received from an authorised repair centre.
•
Do not allow the headset or the headset charging cable to get wet.
• To avoid damaging the headset or the headset charging cable, unplug
your headset charging cable during lightning storms or when unused
for long periods of time.
•
The headset should not be worn when connected to the headset
charging cable.
!
Battery Safety
The wireless headset contains a
built-in battery, improper use of
which may result in explosion. Do
not heat, open, puncture, mutilate,
or dispose of the headset in re.
Power/mute button
Volume-up button
Volume-down button
DC input
Connect button
Lights
Earloop
Microphone
Earpiece
1
2
3
4
english
5
SET UP YOUR WIRELESS HEADSET
Power/mute button
Volume-up button
Volume-down button
DC input
Connect button
Lights
Earloop
Microphone
Earpiece
1
2
3
4
Connect button
Lights
Earloop
Microphone
Earpiece
1
2
3
4
6
english
Before you can use your Xbox 360
Wireless Headset with your Xbox
360 console, you need to:
1 Charge its battery.
2 Introduce the headset to the
console by wirelessly connecting
the two.
3 Put it on.
Charge the Headset
Charge your Xbox 360 Wireless
Headset before rst use and
whenever its built-in battery is
d
epleted. To charge or recharge the
headset, connect one end of the
headset charging cable to a USB port
on your Xbox 360 console and the
other end to the headset’s power
input. Turn on your console while
charging your headset.
While the headset is charging, the
four lights on the headset will ash
green in sequence (1, 2, 3, 4, off).
When charging is complete, all four
lights will blink in unison to signify
that the headset is ready for use.
NOTES
• Fully charging the battery can
take up to six hours using the
headset charging cable.
•
If your headset is wirelessly
connected to a console,
connecting it to the headset
charging cable will disconnect it
from the console.
•
The headset is not functional
when it is connected to the
headset charging cable.
• If the headset is unused for a long
period of time, its battery may
l
ose its charge. If this occurs,
simply recharge the headset
normally.
• The headset may become warm
while charging.
english
7
Connect Your Headset
Connect the headset to your console
by rst pressing the connect button
on the console and then pressing and
holding the connect button on the
headset for two or more seconds. You
have a 20-second window in which to
establish the connection.
To connect your wireless headset to
your console:
1 If your console is not on, press
the power button to turn on
the console.
2 If your headset is not on, press the
headset’s power button to turn on
the headset.
3 Press and release the connect
button on the console.
4 Press and hold the connect button
on the headset for one or more
s
econds. The headset will
automatically be assigned to the
rst available quadrant in the
console’s Ring of Light.
If
a controller is connected to
quadrant 1, the system will
associate the headset with
q
uadrant 1. If another wireless
headset is already associated with
quadrant 1, your headset will be
associated with quadrant 2.
Loading...