Microsoft 6BA-00026 - Wireless Mobile Mouse 3000 Product Manual
1
M
0608 PartNo. X12-16911-06
Contents
Microsoft Product Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Microsoft 产品指南. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Microsoft 제품 가이드 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Microsoft 產品指南 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
. . . . . . . . . . . . . . . . . . . . . . . . . . .47
International Technical Support Numbers (Partial List Only) . . . . . . . . . 59
Microsoft Product Guide
Read this guide for important safety and health information and the terms of the Limited Warranty that
apply to the Microsoft® device that you have purchased.
Warning Failure to properly set up, use, and care for this product can increase the risk of serious injury
or death, or damage to the device or devices. Read this guide and keep all printed guides for future
reference. For replacement guides, go to www.microsoft.com/hardware or refer to the Microsoft Help
and Support section for contact information.
This document includes important information about many Microsoft products. Refer to sections that
apply to the features of your device:
X121691106mnl.indb 1 6/3/08 1:50:22 PM
2
Important Safety Information
AC-Powered Devices
Battery-Powered Devices
Headset Devices
Webcam Devices
Wireless Devices
Keyboard and Mouse Devices
Devices with Laser Pointers
All Devices
Laser and LED Specications
Regulatory Information
Radio Frequency Technical Specications
Radio and TV Interference Regulations
Disposal of Waste Batteries and Electrical and Electronic Equipment
Statement of Compliance with EU Directives
Patent Information
Customer Support Options
Limited Warranty
This symbol identies safety and health messages in this Product Guide and other
product manuals.
Important Safety Information
AC-Powered Devices
These precautions apply to all products that plug into a standard wall power outlet.
Failure to take the following precautions can result in serious injury or death from electric shock or re
or in damage to the device.
To select an appropriate power source for your device:
● Use only the power supply unit and AC power cord that came with your device or that you received
from an authorized repair center.
● Conrm that your electrical outlet provides the type of power indicated on the power supply unit
(in terms of voltage [V] and frequency [Hz]). If you are not sure of the type of power supplied to your
home, consult a qualied electrician.
● Do not use non-standard power sources, such as generators or inverters, even if the voltage and
frequency appear acceptable. Only use AC power provided by a standard wall outlet.
● Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle. Conrm
that they are rated to handle the total current (in amps [A]) drawn by the device (indicated on the
power supply unit) and any other devices that are on the same circuit.
X121691106mnl.indb 2 6/3/08 1:50:23 PM
3
To avoid damaging the power cords and power supply:
● Protect the power cords from being walked on.
● Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet,
the power supply unit, and the device.
● Do not jerk, knot, sharply bend, or otherwise abuse the power cords.
● Do not expose the power cords to sources of heat.
● Keep children and pets away from the power cords. Do not allow them to bite or chew on them.
● When disconnecting the power cords, pull on the plug—do not pull on the cord.
If a power cord or power supply becomes damaged in any way, stop using it immediately. Unplug your
device during lightning storms or when unused for long periods of time.
For devices with an AC power cord that connects to the power supply, always connect the power cord
according to the following instructions:
1 Plug the AC power cord into the power supply until it stops.
2 Plug the other end of the AC power cord into the wall outlet.
Battery-Powered Devices
These precautions apply to all products that use rechargeable or disposable batteries.
Improper use of batteries may result in battery uid leakage, overheating, or explosion. Released battery
uid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed.
To reduce the risk of injury:
● Keep batteries out of reach of children.
● Do not heat, open, puncture, mutilate, or dispose of batteries in re.
● Do not mix new and old batteries or batteries of different types (for example, carbon-zinc and
alkaline batteries).
● Do not allow metal objects to touch the battery terminals on the device; they can become hot
and cause burns.
● Remove the batteries if they are worn out or before storing your device for an extended period of time.
● Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance
with Local and National Disposal Regulations.
● If a battery leaks, remove all batteries, taking care to keep the leaked uid from touching your skin
or clothes. If uid from the battery comes into contact with skin or clothes, ush skin with water
immediately. Before inserting new batteries, thoroughly clean the battery compartment with a damp
paper towel, or follow the battery manufacturer’s recommendations for cleanup.
Disposable (non-rechargeable) batteries only:
● Caution Risk of explosion if battery is replaced by an incorrect type. Use and replace only with correct
size and type (alkaline, zinc-carbon, or zinc-chloride) of batteries.
X121691106mnl.indb 3 6/3/08 1:50:23 PM
4
Rechargeable batteries only:
● Caution Risk of explosion if battery is replaced by an incorrect type. Use and replace only with the same
type and rating as the batteries provided.
● Charge only with the recharger provided with the product.
Lithium button cell batteries only:
● Perchlorate Material — special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/perchlorate
Headset Devices
Extended exposure to high volumes when using a headset may result in temporary or permanent
hearing loss.
To prevent damage to your headset, avoid sitting or stepping on the headset, its cable, or the cable
connector.
Webcam Devices
Webcam with magnetic and adhesive mounting
After the adhesive attachment disc has been applied to the mounting surface, removing it may damage the
cosmetic coating and/or leave an adhesive residue.
Applying the attachment disc next to or directly to a CRT-based display screen may cause permanent visual
distortion of the displayed image near the area mounted.
Wireless Devices
Before boarding any aircraft or packing a wireless device in luggage that will be checked, remove the
batteries from the wireless device or turn the wireless device off (if it has an on/off switch). Wireless devices
can transmit radio frequency (RF) energy, much like a cellular telephone, whenever batteries are installed
and the wireless device is turned on (if it has an on/off switch).
Keyboard and Mouse Devices
Health Warning
Use of a keyboard or mouse may be linked to serious injuries or disorders.
When using a computer, as with many activities, you may experience occasional discomfort in your hands,
arms, shoulders, neck, or other parts of your body. However, if you experience symptoms such as persistent
or recurring discomfort, pain, throbbing, aching, tingling, numbness, burning sensation, or stiffness,
DO NOT IGNORE THESE WARNING SIGNS. PROMPTLY SEE A QUALIFIED HEALTH PROFESSIONAL,
even if symptoms occur when you are not working at your computer. Symptoms like these can be associated
with painful and sometimes permanently disabling injuries or disorders of the nerves, muscles, tendons, or
other parts of the body. These musculoskeletal disorders (MSDs) include carpal tunnel syndrome, tendonitis,
tenosynovitis, and other conditions.
X121691106mnl.indb 4 6/3/08 1:50:23 PM
5
While researchers are not yet able to answer many questions about MSDs, there is general agreement that
many factors may be linked to their occurrence, including: overall health, stress and how one copes with it,
medical and physical conditions, and how a person positions and uses his or her body during work and other
activities (including use of a keyboard or mouse). The amount of time a person performs an activity may also
be a factor.
Some guidelines that may help you work more comfortably with your computer and possibly reduce your
risk of experiencing an MSD can be found in the “Healthy Computing Guide” installed with this device’s
software. If this device did not come with software, you can access the “Healthy Computing Guide” at
www.microsoft.com/hardware or (in the United States only) by calling (800) 360-7561 to request a CD at
no charge.
If you have questions about how your own lifestyle, activities, or medical, or physical condition may be
related to MSDs, see a qualied health professional.
Devices with Laser Pointers
Caution Use of controls or adjustments, or performance of procedures other than those specied herein
may result in hazardous radiation exposure.
● Do not stare into beam.
● Do not shine a laser pointer at anyone. Laser pointers are designed to illuminate inanimate objects.
● Do not allow minors to use a pointer unsupervised. Laser pointers are not toys.
● Do not point a laser pointer at a mirror-like (reective) surface. A reected beam can act like a direct
beam on the eye.
● Do not disassemble the device.
● Do not use the device outside of its specied operating temperature range +41ºF (+5ºC) to +95ºF
(+35ºC). If the device is exposed to an environment outside of its prescribed operation, turn off
the device and allow the temperature to stabilize within the specied operating range before using
the device.
All Devices
Do Not Attempt Repairs
Do not attempt to take apart, open, service, or modify the hardware device or power supply. Doing so could
present the risk of electric shock or other hazard. Any evidence of any attempt to open and/or modify the
device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.
Choking Hazard
This device may contain small parts which may be a choking hazard to children under 3. Keep small parts
away from children.
X121691106mnl.indb 5 6/3/08 1:50:23 PM
6
Usage and Cleaning
Use in accordance with these instructions:
● Do not use near any heat sources.
● Only use attachments/accessories specied by Microsoft.
● Clean only with dry cloth.
Keeping Cables Out of the Way of People and Pets
Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as
they move around or walk through the area. When the product is not in use, you may need to disconnect all
cables and cords from the front and rear of the product to keep them out of the reach of children and pets.
Do not allow children to play with cables and cords.
Laser and LED Specications
Caution Use of controls or adjustments, or performance of procedures other than those specied herein
may result in hazardous radiation exposure.
Laser Devices
This device complies with International Standard IEC60825-1:1993+A1+A2 (IEC 60825-1:2001-08) for a Class
1 and Class 2 laser product. This device also complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007.
Class 1 Laser Devices
Beam description: Collimated (parallel) beam of infrared light (invisible to
the user)
Laser power output: < 716 microwatts (at 832 nanometers) to 834 microwatts
(at 865 nanometers)
Emitted laser wavelength: nominal: 850 nanometers, range: (832 – 865
nanometers)
A Class 1 laser product is safe under reasonably foreseeable conditions of operation as described by
IEC 60825-1 and 21 CFR 1040.10. However, it is recommended that you not direct the laser beam (which is
emitted from the bottom of the device) at anyone’s eyes.
Class 2 Laser Devices
Beam description: Collimated (parallel) beam of light
Laser power output: < 1 milliwatt
Emitted laser wavelength: 630 – 670 nanometers
This optical device has no serviceable parts. The Class 2 laser
beam is emitted from the front of the device.
CLASS 1
LASER PRODUCT
IEC 60825-1:2001-08
X121691106mnl.indb 6 6/3/08 1:50:24 PM
7
Optical (LED) Mouse
This product has been evaluated to comply with International Standard
IEC60825-1:1993+A1+A2 (IEC 60825-1:2001-08).
This product uses LEDs that are considered Class 1 (IEC60825-1:1993+A1+A2).
LED output power: < 67.8µW (photochemical limit), < 4.2mW (thermal limit)
LED nominal wavelength: 470nm (blue), 635nm (red)
A Class 1 product is safe under reasonably foreseeable conditions of operation as described by IEC 60825-1.
However, it is recommended that you not direct the light (which is emitted from the bottom of the device)
at anyone’s eyes.
This optical device has no serviceable parts.
Regulatory Information
Tested to comply with FCC (U.S. Federal Communications Commission) Standards. For home or ofce use.
Not intended for use in machinery, medical, or industrial applications. Any changes or modications not
expressly approved by Microsoft could void the user’s authority to operate this device. This product is for use
with NRTL-Listed (UL, CSA, ETL, etc.), and/or IEC/EN 60950 compliant (CE marked) Information Technology
equipment. No serviceable parts included.
This device is rated as a commercial product for operation at +41ºF (+5ºC) to +95ºF (+35ºC).
This Class B digital apparatus complies with Part 15 of the U.S. Federal Communications Commission
(FCC) rules, Canadian ICES-003, RSS-Gen, RSS-210, and RSS-310. Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The term “IC:” before the certication/registration number only signies that the Industry Canada technical
specications were met.
Complies with
IDA Standards
DB102868
Complies with
IDA Standards
DB100398
Radio Frequency Technical Specications
27 MHz Devices
Radio frequency (RF) output power: < 54 dBµV/m at 3 m
Keyboard with two channels – RF frequencies: 27.095 MHz (channel 1), 27.195 MHz (channel 2)
Keyboard with a single channel – RF frequency: 27.195 MHz or 27.095 MHz
Mouse with two channels – RF frequencies: 27.045 MHz (channel 1), 27.145 MHz (channel 2)
Mouse with a single channel – RF frequency: 27.145 MHz or 27.045 MHz
Class 1 LED product
X121691106mnl.indb 7 6/3/08 1:50:24 PM
8
Bluetooth Devices
RF output power: meets Bluetooth® requirements
Frequency: 2,400 MHz to 2483.5 MHz
2.4 GHz Devices
Non-specic short range device
RF output power: Meets all SRD requirements
Frequency: within the range of 2,400 MHz to 2,483.5 MHz
For Bluetooth and 2.4 GHz devices only:
To comply with FCC RF exposure requirements, the following
operating congurations must be satised: the antenna has been installed by the manufacturer and no
changes can be made. The wireless devices must not be co-located or operating in conjunction with any
other antenna or transmitter. Except for headset and handheld devices, wireless devices must be at least
20 cm between the antenna of wireless device and all persons.
For 802.11 devices only:
This product is restricted to indoor use only to reduce any potential for harmful
interference with licensed operation in the 5.15 to 5.25 GHz frequency range.
Microsoft Corporation; One Microsoft Way; Redmond, WA 98052-6399; U.S.A.
United States: (800) 426-9400; Canada: (800) 933-4750
Disposal of Waste Batteries and Electrical & Electronic Equipment
This symbol on the product or its batteries or its packaging means that this product and any
batteries it contains must not be disposed of with your household waste. Instead, it is your
responsibility to hand this over to an applicable collection point for the recycling of batteries and
electrical and electronic equipment. This separate collection and recycling will help to conserve natural
resources and prevent potential negative consequences for human health and the environment due to
the possible presence of hazardous substances in batteries and electrical and electronic equipment, which
could be caused by inappropriate disposal. For more information about where to drop off your batteries
and electrical and electronic waste, please contact your local city/municipality ofce, your household waste
disposal service, or the shop where you purchased this product. Contact weee@microsoft.com for additional
information on WEEE and waste batteries.
X121691106mnl.indb 8 6/3/08 1:50:24 PM
9
Statement of Compliance with EU Directives
Hereby, Microsoft Corporation declares that this product is in compliance with the essential requirements
and other relevant provisions of Directives, 2006/95/EC, 2004/108/EC and 1999/5/EC.
The technical documentation as required by the Conformity Assessment procedure is kept at the following
address:
Company: Microsoft Ireland Operations Ltd.
Address: Atrium Building Block B
Carmenhall Road, Sandyford Industrial Estate, DUBLIN 18
Country: Ireland
Telephone number: +353 1 295 3826
Fax number: +353 1 706 4110
Internet: http://www.microsoft.com/ireland/
Patent Information
United States and/or international patents pending.
Customer Support Options
If you have a question about your Microsoft hardware product, do the following:
● Check the system requirements for your product (located on the packaging) to ensure that your system
is compatible.
●
Read through all printed documentation.
●
For additional product information, go to the Microsoft Hardware Web site at
www.microsoft.com/hardware.
●
For up-to-date help about using or troubleshooting your device, go to the Microsoft Help and Support
Web site at http://support.microsoft.com.
If you still have a question, see the following Microsoft support options.
Product Name: Microsoft Hardware Devices
OEM Distributed: If this product came with a new computer or device, the hardware manufacturer provides
technical support. Please contact your manufacturer directly for support.
Self-Help Support: Search our Knowledge Base, watch videos for solving common problems, and download
available updates by visiting http://support.microsoft.com.
Chat and E-mail: Chat immediately, or send an e-mail message to a Microsoft Support Professional by
visiting http://support.microsoft.com.
Note that e-mail response may be delayed by several hours.
X121691106mnl.indb 9 6/3/08 1:50:25 PM
10
Phone Support: In the United States, call (866) 833-7088
In Canada, call (800) 876-8533
For all other regions, see the “International Technical Support Numbers”
later in this section.
TTY Users:
In the United States, call (800) 892-5234
In Canada, call (866) 857-9850
For all other regions, see the “International Technical Support Numbers”
later in this documentation.
Conditions: Microsoft support services are subject to then-current prices, terms, and conditions,
which are subject to change without notice. Toll charges may apply to all non-toll-free
numbers listed.
Note For regional support policy details and more, go to http://support.microsoft.com/international.aspx
and select your country or region from the list. If there is no Microsoft subsidiary ofce in your country or
region, please contact the establishment from which you obtained your Microsoft product.
Limited Warranty
IMPORTANT—PLEASE READ THIS LIMITED WARRANTY CAREFULLY TO UNDERSTAND YOUR RIGHTS AND OBLIGATIONS! The
term “Hardware Device” means the Microsoft hardware product. The term “You” means either an individual or a single legal
entity who will be referred to in this Limited Warranty as “You” and “Your”.
A. WARRANTIES.
1. Express Warranty. Subject to the terms and conditions of this Limited Warranty and in lieu of any other (if any) express
warranties, Microsoft warrants that under normal use and service, on the date of acquisition as shown on Your receipt or
similar proof of payment and for the next i) 90 days for the SOFTWARE and ii) period of time stated below for the applicable
Hardware Device (hereafter each dened as the “Warranty Period”), that the SOFTWARE and Hardware Device will
substantially conform with the accompanying Microsoft packaging and documentation. As to any defects discovered after
the Warranty Period, there is no warranty or condition of any kind.
Warranty Period:
Xbox 360 Accessories for Windows; Microsoft LifeChat ZX-6000: Ninety (90) day warranty.
Microsoft LifeChat LX-2000: One (1) year
LifeCam VX-500; LifeCam VX-700; Comfort Optical Mouse 3000; Compact Optical Mouse 500; Wheel Mouse Optical: Two
(2) years
IntelliMouse® Optical; Wireless IntelliMouse Explorer; IntelliMouse Explorer for Bluetooth; Wireless IntelliMouse Explorer
with Fingerprint Reader: Five (5) years
Microsoft Fingerprint Reader: Three (3) years
Microsoft Presenter 3000: Three (3) years
Microsoft LifeChat LX-3000: Three (3) years
For all other Microsoft webcams (excluding the Microsoft Xbox Live Vision Camera): Three (3) years
For all other Microsoft keyboard and mouse desktop sets: Three (3) years
For all other Microsoft keyboard devices: Three (3) years
X121691106mnl.indb 10 6/3/08 1:50:25 PM
11
For all other Microsoft mouse devices: Three (3) years
This Limited Warranty does not cover, and no warranty of any kind is provided with respect to any subjective or aesthetic
aspects of the Hardware Device or SOFTWARE. The express warranty stated above is the only express warranty made to You
and is provided in lieu of all other express or implied warranties and conditions (except for any non-disclaimable implied
warranties that exist), including any created by any other documentation or packaging. No information or suggestions (oral
or in a record) given by Microsoft, its agents, afliates or suppliers or its or their employees or agents, shall create a warranty
or condition or expand the scope of this Limited Warranty. The “Governing Law; Exclusive Forum” provision of Part 2 of the
Agreement applies to this Limited Warranty and is incorporated herein by this reference.
2. Limitation on Duration of Implied Warranties. If You are a consumer, You may also have an implied warranty and/or
condition under the laws of some jurisdictions, which is hereby limited to the duration of the Warranty Period. Some
jurisdictions do not allow limitations on how long an implied warranty or condition lasts, so the foregoing limitation may not
apply to You.
B. EXCLUSIVE REMEDY. Subject to applicable law and the following, and provided that You return the SOFTWARE and
Hardware Device to Your place of acquisition (or, if that place will not accept the return, to Microsoft) with a copy of Your
receipt or other bona de proof of payment during the Warranty Period, Microsoft will, at its option and as Your exclusive
remedy for breach of this Limited Warranty and any implied warranties:
repair or replace all or part of the defective SOFTWARE or the defective Hardware Device; or
make payment to You for the allowable damages that You incurred in reasonable reliance, but only up to the amount You
paid (if any) for the SOFTWARE and/or the Hardware Device less reasonable depreciation based on actual use.
The above remedy is subject to the following:
Any repaired or replaced SOFTWARE or Hardware Device will be new or refurbished or serviceably used, comparable in
function and performance to the original Hardware Device (or SOFTWARE), and may include third party items;
Any SOFTWARE or Hardware Device repaired or replaced under this Limited Warranty will be warranted for the remainder
of the original Warranty Period or 30 days from the date of shipment of the item back to You, whichever is longer. If an
upgrade to SOFTWARE is delivered with a new limited warranty, then the terms of that new limited warranty will apply only
to the SOFTWARE as upgraded, but will not apply to the original Hardware Device;
Except as otherwise required by legislation in Your jurisdiction, costs associated with transport (including packaging) for
warranty service shall be at Your expense; and
Microsoft does not provide any warranties regarding any other services provided under this Limited Warranty and disclaims
all duties (if any) of workmanlike effort or of lack of negligence regarding such services.
C. EXCLUSION OF OTHER DAMAGES. TO THE FULL EXTENT ALLOWED BY LAW, MICROSOFT AND ITS SUPPLIERS, AFFILIATES
AND AGENTS ARE NOT LIABLE FOR ANY:
(i) CONSEQUENTIAL OR INCIDENTAL DAMAGES;
(ii) DAMAGES OR LOSS OF ANY NATURE WHATSOEVER RELATING TO LOST PROFITS, BUSINESS INTERRUPTION, LOSS OF
DATA OR PRIVACY OR CONFIDENTIALITY, ANY INABILITY TO USE ALL OR PART OF THE HARDWARE DEVICE OR SOFTWARE,
PERSONAL INJURY, OR ANY FAILURE TO MEET ANY DUTY (INCLUDING BUT NOT LIMITED TO ANY DUTY OF NEGLIGENCE,
GOOD FAITH OR OF WORKMANLIKE EFFORT); OR
(iii) INDIRECT, SPECIAL, OR PUNITIVE DAMAGES ARISING OUT OF OR RELATING IN ANY WAY TO THE SOFTWARE OR
HARDWARE DEVICE. THE FOREGOING APPLIES EVEN IF MICROSOFT OR ANY SUPPLIER, AFFILIATE OR AGENT HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES; AND EVEN IN THE EVENT OF FAULT, TORT (INCLUDING
NEGLIGENCE), STRICT OR PRODUCT LIABILITY, MISREPRESENTATION OR OTHER REASON.
X121691106mnl.indb 11 6/3/08 1:50:25 PM
12
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation
or exclusions many not apply to You.
D. EXCLUSIONS FROM COVERAGE. This Limited Warranty shall not apply and Microsoft has no liability under this Limited
Warranty if the SOFTWARE or Hardware Device:
- is used for commercial purposes (including rental or lease) or purposes beyond the scope of the SOFTWARE license;
- is modied or tampered with;
- is damaged by Acts of God, power surge, misuse, abuse, negligence, accident, wear and tear, mishandling, misapplication,
or other causes unrelated to defects in the Hardware Device or the SOFTWARE;
- is damaged by programs, data, viruses, or les, or during shipments or transmissions;
- is not used in accordance with the accompanying documentation and use instructions; or
- is repaired, modied or altered by other than a Microsoft authorized repair center and the unauthorized center causes or
contributes to any defect or damage.
This Limited Warranty does not include any warranty regarding legal rights or abilities, such as any warranty regarding title,
quiet enjoyment or lack of infringement.
E. REGISTRATION. You need not register Your acquisition of the SOFTWARE and Hardware Device for the Limited Warranty
to be effective.
F. BENEFICIARY. To the extent allowed by applicable law, the Limited Warranty is only made to You, the rst licensed user
of the SOFTWARE or purchaser of the Hardware Device, and there are no third party beneciaries of the Limited Warranty.
Except as required by law, this Limited Warranty is not intended for and does not apply to anyone else, including anyone to
whom You make any transfer as authorized in the Agreement.
G. FURTHER INFORMATION. Microsoft is the warrantor under this Limited Warranty. To receive instructions for obtaining
performance of this Limited Warranty You must either contact the Microsoft subsidiary serving Your country, or write to:
Microsoft Sales Information Center, One Microsoft Way, Redmond, WA 98052-6399, USA, or visit Microsoft on the World
Wide Web at http://www.microsoft.com.
You must also:
1. Submit proof of payment in the form of a bona de, dated receipt, or invoice (or a copy) evidencing that You are the
beneciary of this Limited Warranty and that Your request for a remedy is made within the Warranty Period;
2. Follow Microsoft’s shipping and other instructions if it determines that all or part of Your Hardware Device or SOFTWARE
requires return. To obtain the Limited Warranty performance, You must take or deliver the item in either its original
packaging or packaging that provides an equal degree of protection to the location specied by Microsoft. Except as
otherwise required by legislation in Your jurisdiction, costs associated with transport (including packaging) for warranty
service shall be at Your expense.
3. Delete or remove any les or data You consider private or condential prior to sending the item to Microsoft.
Failure to follow the above instructions may result in delays, cause You to incur additional charges, or may void Your
warranty.
This Limited Warranty gives You specic legal rights and You may also have other rights which vary from jurisdiction to
jurisdiction. Where any term of this Limited Warranty is prohibited by such laws, it shall be null and void, but the remainder
of the Limited Warranty shall remain in full force and effect if its allocation of risks is not materially disturbed.
X121691106mnl.indb 12 6/3/08 1:50:26 PM
13
Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless
otherwise noted, the example companies, organizations, products, domain names, e-mail addresses, logos, people, places, and events
depicted herein are ctitious, and no association with any real company, organization, product, domain name, e-mail address, logo,
person, place, or event is intended or should be inferred. Complying with all applicable copyright laws is the responsibility of the user.
Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system,
or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without
the express written permission of Microsoft Corporation.
Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in
this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not
give you any license to these patents, trademarks, copyrights, or other intellectual property.
Microsoft Corporation grants the purchaser of this product the right to reproduce one (1) copy of this user manual for each Hardware
Device you purchased in the package.
© 2008 Microsoft Corporation. All rights reserved.
Microsoft, IntelliEye, IntelliMouse, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
All other trademarks are property of their respective owners.
X121691106mnl.indb 13 6/3/08 1:50:26 PM
14
M
Microsoft 产品指南
请阅读本指南，了解适用于您所购买的 Microsoft® 设备的重要安全和健康信息以及有限担保条款。
警告 如果该产品安装、使用和保管不当，可能会对身体造成严重伤害甚至死亡，还可能导致设备损坏。请阅
读本指南并妥善保管所有书面指南以供将来参考。有关替代指南，请访问
www.microsoft.com/hardware 或参阅“Microsoft 帮助和支持”部分以获得联系信息。
本文档提供了有关许多 Microsoft 产品的重要信息。请参阅适用于您的设备功能的部分：
重要安全信息
使用交流电源的设备
使用电池的设备
耳机设备
网络摄像机设备
无线设备
键盘和鼠标设备
带有激光指示器的设备
所有设备
激光和 LED 规格
规定信息
射频技术规格
废旧电池和电子电气设备的处理
专利信息
客户支持选项
有限担保
在本产品指南和其他产品手册中，该符号表示安全和健康信息。
重要安全信息
使用交流电源的设备
以下注意事项适用于所有需要插入标准墙体电源插座的产品。
如果不遵守以下注意事项，可能会导致由电击或火灾引起的严重伤害或死亡，或者导致设备损坏。
为您的设备选择适当的电源：
● 仅使用随设备一起提供的或从授权维修中心获得的电源器和交流电源线。
● 确认您的电气插座能够提供电源器上标明的电源类型（根据电压 [V] 和频率 [Hz]）。如果您不能确定您家中的
供电类型，请咨询合格的电气技术人员。
● 不要使用非标准电源（例如，发电机或变流器），即使它们的电压和频率看起来可以接受。请仅使用标准墙体
插座提供的交流电。
● 不要使您的墙体插座、延长线、配电盘或其他电气插座过载。确认它们的级别能够承载设备电源器上标明的消
耗电流和同一电路上所有其他设备消耗的电流的总和（单位为安培 [A]）。
X121691106mnl.indb 14 6/3/08 1:50:27 PM
15
避免损坏电源线和电源：
● 防止人员踩踏电源线。
● 防止挤压或严重折弯电源线，尤其是在电源线与电源插座、电源器和设备的连接处。
● 不要猛拉、打结、严重折弯或不当使用电源线。
● 不要将电源线暴露在热源中。
● 使儿童和宠物远离电源线。不要让他们啃咬或咀嚼电源线。
● 在断开电源线时，请握住插头拔出，不要通过拉扯电源线拔出。
如果电源线或电源由于任何原因受到损坏，请立即停止使用。如果出现雷雨天气或者长期不用设备，请拔出设备
电源线。
如果设备带有连接电源的交流电源线，请务必按照以下说明连接电源线：
1 将交流电源线插入电源，直到插不动为止。
2 将交流电源线的另一端插入墙体插座。
使用电池的设备
以下注意事项适用于所有使用可充电电池或一次性电池的产品。
如果电池使用不当，可能会导致电池发生液体泄漏、过热或爆炸。流出的电池液体具有腐蚀性，而且可能有毒，同
时还可能造成皮肤和眼睛烧伤，吞咽此类液体也会造成伤害。
降低受伤的风险：
● 将电池放在儿童触及不到的地方。
● 不要加热、打开、刺破、毁坏电池或将电池投入火中。
● 不要混用新旧电池或者不同类型的电池（例如，碳锌电池和碱性电池）。
● 不要让金属物体触碰设备上的电池端子，以免造成发热起火。
● 在电池电量用完时或在长时间储存设备之前，请取出电池。
● 及时取出旧的、电量不足的或已耗尽的电池，并根据国家/地区和当地废弃物处理法规对其进行回收或处理。
● 如果电池泄漏，请取出所有电池，同时注意避免泄漏的液体接触您的皮肤或衣服。如果电池流出的液体沾到了
皮肤或衣服上，请立即用清水冲洗。在装入新电池之前，请用湿纸巾彻底清洁电池盒，或按照电池制造商的建
议进行清洁。
对于一次性（不可充电）电池：
● 警告 如果更换的电池的类型不正确，可能会引起爆炸。请仅使用大小和类型（碱性、碳锌或锌氯）均符合要求
的电池进行更换。
对于可充电电池：
● 警告 如果更换的电池的类型不正确，可能会引起爆炸。请仅使用与所提供电池的类型和等级相同的电池，更
换电池也应如此。
● 仅使用与产品一起提供的充电器进行充电。
对于纽扣式锂电池：
● 高氯酸盐材料 — 需要进行特殊处理。请访问：www.dtsc.ca.gov/hazardouswaste/perchlorate
X121691106mnl.indb 15 6/3/08 1:50:27 PM
16
耳机设备
使用耳机时如果长期处于高音量状态下，可能会导致暂时或永久性听力受损。
为了防止损坏耳机，请避免误坐或踩踏耳机、耳机电缆或电缆连接器。
网络摄像机设备
利用磁性和粘贴方式安装的网络摄像机
将粘性附着圆盘用在安装表面后，再将其移除可能会损坏涂层和/或留下粘性残留物。
将附着圆盘直接用在 CRT 显示器上或旁边，可能导致安装区域附近的显示图像永久性失真。
无线设备
在登机之前或在需要接受安检的行李中携带无线设备之前，请取出无线设备的电池或关闭无线设备（如果有开
关）。如果安装了电池并且处于打开状态（如果有开关），无线设备就会发射射频 (RF) 能量，这与手机非常相似。
键盘和鼠标设备
健康警告
使用键盘或鼠标可能引起严重的损伤或失调。
与从事许多其他活动一样，在使用计算机时，您的手、臂、肩、颈或身体其他部位可能偶尔感到不适。但是，如果持
续或反复出现不适、疼痛、抽痛、刺痛、麻痹、灼热感或僵硬等症状，切勿忽视这些警告信号，应立即到合格的专
业医疗人员处就诊，即使这些症状不是在您使用计算机时出现的也应如此。此类症状可能与神经、肌肉、肌腱或
身体其他部位的疼痛性、永久性损伤或失调有关。这些肌肉骨骼失调症 (MSD) 包括腕骨隧道综合症、腱鞘炎、腱
鞘滑膜炎以及其他相关的病症。
虽然研究人员还不能回答很多有关肌肉骨骼失调症的问题，但是普遍认为很多因素可能导致此病症的发生，其中
包括：整体健康状况、压力与个人调节方式、医疗和生理状况以及在工作和从事其他活动（包括使用键盘或鼠标）
期间每个人调整和使用其身体的方式。从事某项活动的时间长短也可能是造成不适的因素之一。
有关可以帮助您更加舒适地使用计算机工作并减少患肌肉骨骼失调症几率的指导信息，请参阅随设备软件一起安
装的“计算机使用健康指南”。如果此设备没有配备软件，您可以访问 www.microsoft.com/hardware 以获得“计
算机使用健康指南”或拨打 (800) 360-7561 免费获取一张 CD（仅限美国）。
如果您对自己的生活方式、活动、医疗或生理状况与肌肉骨骼失调症之间的关系有任何疑问，请咨询合格的专业
医疗人员。
带有激光指示器的设备
警告 请遵循此处指示来控制、调整或执行操作，否则可能会受到有害辐射。
● 不要直视激光束。
● 不要用激光指示器照射人体。激光指示器在设计上只用于照射无生命物体。
● 不要让未成年人在无人监管的情况下使用激光指示器。激光指示器不是玩具。
● 不要用激光指示器指向类似于镜面的（反射）表面。反射的激光束照射眼睛造成的后果与直接用激光束照射眼
睛相同。
● 不要拆卸设备。
● 不要在指定的工作温度范围之外使用此设备：华氏 +41 度（摄氏 +5 度）至华氏 +95 度（摄氏 +35 度）。如果
此设备处在指定的工作环境之外，请关闭设备，待温度逐渐稳定到指定工作温度范围后再继续使用。
X121691106mnl.indb 16 6/3/08 1:50:28 PM
17
类 1
激光产品
IEC 60825-1:2001-08
所有设备
不要尝试对设备进行维修
不要尝试拆卸、打开、维修或修改硬件设备或电源，以免发生电击或其他危险。如果有证据证明您曾尝试打开和/或
修改设备（包括剥开、刺破或移除标签），您将不再享受有限担保。
窒息危险
本设备包含的小部件可能会导致 3 岁以下的儿童发生窒息危险，因此请让儿童远离这些小部件。
使用和清洁
请遵循以下使用说明：
● 使用时远离热源。
● 仅使用 Microsoft 指定的配件/附件。
● 仅用干布进行清洁。
将电缆放在人和宠物踩踏不到的地方
合理摆放所有电缆和电源线，以免人和宠物在该区域周围走动或穿越该区域时被绊倒或意外拉动电缆和电源线。
不使用产品时，可能需要断开产品前后两端的所有电缆和电源线，将其放在儿童和宠物触及不到的地方。不要让儿
童玩耍电缆和电源线。
激光和 LED 规格
警告 请遵循此处指示来控制、调整或执行操作，否则可能会受到有害辐射。
激光设备
此设备符合国际标准 IEC 60825-1:2001-08 对类 1 和类 2 激光设备产品的规定。此设备也符合 21 CFR
1040.10 和 1040.11，但不符合 2007 年 6 月 24 日第 50 号激光通告的规定。
类 1 激光设备
激光束说明：准直（平行）红外线光束（使用者无法看到）
激光输出功率：< 716 微瓦（832 纳米）至 834 微瓦（865 纳米）
发射的激光波长：标称：850 纳米，范围：（832 – 865 纳米）
在 IEC 60825-1 和 21 CFR 1040.10 中描述的合理可预见操作情况下，
类 1 激光产品是安全的。然而，我们建议不要使用激光束（从设备底部发射）直接
照射眼睛。
类 2 激光设备
激光束说明：准直（平行）光束
激光输出功率：< 1 毫瓦
发射的激光波长：630 – 670 纳米
此光学设备不含任何可维修零件。类 2 激光束从设备前端发
射。
X121691106mnl.indb 17 6/3/08 1:50:29 PM
18
类 1 LED 产品
光学 (LED) 鼠标
本产品经评估符合国际标准 IEC60825-1:1993+A1+A2
(IEC 60825-1:2001-08)。
本产品使用属于类 1 (IEC60825-1:1993+A1+A2) 的 LED。
LED 输出功率：< 67.8µW（光化学限制），< 4.2mW（热量限制）
LED 标称波长：470 纳米（蓝色），635 纳米（红色）
在 IEC 60825-1 中描述的合理可预见操作情况下，类 1 产品是安全的。然而，我们建议不要使用光束（从设备底
部发射）直接照射眼睛。
此光学设备不含任何可维修零件。
规定信息
经测试符合 FCC（美国联邦通讯委员会）标准。供家庭或办公室使用。不适用于机械、医疗或工业应用。任何未经
Microsoft 明确认可的更改和修改，都可能会导致用户无权使用本设备。本产品适用于 NRTL 列出的（UL、CSA
和 ETL 等）和/或 IEC/EN 60950 兼容的（具有 CE 标志）信息技术设备。不包括可维修零件。
本设备作为商业产品可在华氏 +41 度（摄氏 +5 度）至华氏 +95 度（摄氏 +35 度）的环境下使用。
根据《微功率(短距离)无线电设备管理暂行规定》第十三条
● 不得擅自更改发射频率、加大发射功率(包括额外加装射频功率放大器)，不得擅自外接天线或改用其它发射天
线；
● 使用时不得对各种合法的无线电通信业务产生有害干扰；一旦发现有干扰现象时，应立即停止使用，并采取措
施消除干扰后方可继续使用；
● 使用微功率无线电设备，必须忍受各种无线电业务的干扰或工业、科学及医疗应用设备的辐射干扰；
● 不得在飞机和机场附近使用
根据中华人民共和国无线电管理条例，经审查，下列无线电发射设备均符合中华人民共和国无线电
管理规定和技术标准，其核准代码分别为：
Wireless Optical Mouse Blue 为 CMII ID: 2002DJ1111
Wireless Optical Desktop - Wireless Optical Mouse and Wireless MultiMedia Keyboard 1.0A 为CMII ID:
2002DJ1108 和 CMII ID: 2002DJ1109
Wireless IntelliMouse Explorer 2.0为 CMII ID: 2003DJ1035
Wireless Optical Mouse 2.0为 CMII ID: 2003DJ1034
Basic Wireless Optical Desktop为 CMII ID: 2003DJ1157 和 CMII ID: 2002DJ1108
Wireless Optical Desktop Elite 为 CMII ID:2003DJ1190 和CMII ID: 2003DJ1035
Wireless Optical Desktop - Wireless Optical Mouse 2.0 and Wireless Multimedia Keyboard 1.0A 为 CMII
ID: 2003DJ1034 和 CMII ID: 2002DJ1109
Microsoft Wireless Notebook Optical Mouse 为 CMII ID: 2004DJ0872
X121691106mnl.indb 18 6/3/08 1:50:29 PM
Loading...