Microsoft 1558 User Manual
www.microsoft.com/hardware/support
1
2
i1
3
4
i2
www.microsoft.com/hardware/supportwww.microsoft.com/hardware/productguide
1
M
0608 Par tNo. X12-16912-06
Contents
Microsoft Product Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Guia do Producto da Microsoft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Guide produit Microsoft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Guía del producto de Microsoft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
International Technical Support Numbers (Partial List Only) . . . . . . . . . 51
X121691206mnl.indb 1 5/23/2008 1:17:18 PM
2
Microsoft Product Guide
Read this guide for import ant safety and health infor mation and the terms of the Limite d Warranty that
apply to the Micr osoft® device that you have purchase d.
Warning Failure to proper ly set up, use, and c are for this product can increase the risk of serious injur y
or death, or damage to the device or devices. Rea d this guide and keep all printed guides for future
reference. For replacement guides, go to www.microsoft.com/har dware or refe r to the Microsof t Help
and Suppor t section for contact information.
This docume nt includes important information about many Microsoft produc ts. Refer to sections that
apply to the features of your device:
Impor tant Safet y Information
AC-Powered Devices
Batter y-Powered Devices
Headset Devices
Webcam Devices
Wireles s Devices
Keyboard and Mouse Devices
Devices with Laser Pointers
All Device s
Laser and LED Specications
Regulator y Information
Radio Frequency Technical Specications
Radio and TV Interfer ence Regulations
Disposal of Waste Batter ies and Electrical and Ele ctronic Equipment
Statement of Compliance with EU Directive s
Patent Information
Customer Support Options
Limited Warranty
This symbol identies safe ty and hea lth messages in this Product Gu ide and other
product manuals.
Important Safety Information
AC-Powered Devices
These pre cautions apply to all produc ts that plug into a standard wall power outlet .
Failure to take the following precautions can result in serious injury or death from electric shock or re
or in damage to the de vice.
M
X121691206mnl.indb 2 5/23/2008 1:17:18 PM
3
To select an appropriate power source for your device:
● Use only the power supply unit and AC power cord that came with your device or that you received
from an autho rized repair center.
● Conrm that your electrical outlet provides the type of power indicated on the power supply unit
(in terms of vol tage [V ] and freque ncy [Hz]). If you are not sure of the type of power supplie d to your
home, consult a qualied electrician.
● Do not use non-standard power sources, such as generators or inverters, even if the voltage and
frequency appear acceptable. Only use AC power provided by a standard wall outlet.
● Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle. Conrm
that they are rated to handle the tot al current (in amps [A]) drawn by the dev ice (indicated on the
power suppl y unit) and any other de vices that are on the same circuit .
To avoid damaging the power cords and power supply:
● Protect the power cords from being walked on.
● Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet,
the power supply unit, and the device.
● Do not jerk, knot, sharply bend, or otherwise abuse the power cords.
● Do not expose the power cords to sources of heat.
● Keep children and pets away from the power cords. Do not allow them to bite or chew on them.
● When disconnecting the power cords, pull on the plug—do not pull on the cord.
If a power cord or power supply becomes damaged in any way, stop using it immediately. Unplug your
device during lightning storms or when unus ed for long periods of time.
For devices with an AC power cord that connects to the power suppl y, always connec t the power cord
according to the following instructions:
1 Plug the AC powe r cord into the power supply until it stops.
2 Plug the other end of the AC power cor d into the wall outlet.
Battery-Powered Devices
These pre cautions apply to all produc ts that use re chargeable or disposabl e batteries.
Improper use of batteries may result in battery uid leakage, overheating, or explosion. Released battery
uid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed.
To reduce the risk of injury:
● Keep batteries out of reach of children.
● Do not heat, open, puncture, mutilate, or dispose of batteries in re.
● Do not mix new and old batteries or batteries of different types (for example, carbon-zinc and
alkaline batteries).
● Do not allow metal objects to touch the battery terminals on the device; they can become hot
and cause burns.
X121691206mnl.indb 3 5/23/2008 1:17:18 PM
4
● Remove the bat teries if they are worn out or before storing your device for an extended period of time.
● Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance
with Local and National Disposal Regulations.
● If a battery leaks, remove all batteries, taking care to keep the leaked uid from touching your skin
or clothes. If uid from the battery comes into contact with skin or clothes, ush skin with water
immediate ly. Before inserting new batteries , thoroughl y clean the battery compartment with a damp
paper towel, or follow the bat tery manufacture r’s recommendations for cleanup.
Disposable (non-rechargeable) batteries only:
● Caution Risk of explosion if battery is replaced by an incorrect type. Use and replace only with correct
size and type (alkaline, zinc-carbon , or zinc-chlor ide) of batteries.
Rechargeable batteries only:
● Caution Risk of explosion if battery is replaced by an incorrect type. Use and replace only with the same
type and rating as the batteries prov ided.
● Charge only with the recharger provided with the product.
Lithium button cell batteries only:
● Perchlorate Material — special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/perchlorate
Headset Devices
Extended exposure to high volumes when using a headset may result in temporary or permanent
hearing loss.
To prevent damage to yo ur headset , avoid sitting or stepping on the headset, its cable, or the cable
connector.
Webcam Devices
Webcam with magnetic and adhesive mounting
After the adhesive att achment disc has been applied to the mounting surface, re moving it may damage the
cosmetic coating and/or leave an adhesive residue.
Applying the attachment disc next to or directly to a CRT-based display screen may cause permanent visual
distortion of the displayed image near the area mounted.
Wireless Devices
Before boarding any aircraft or packin g a wireless device in luggage that will be checked , remove the
batteries from the wireless device or turn the wireless device of f (if it has an on/of f switch). Wireless devices
can transmi t radio frequ ency (RF) energy, much like a cellular telephone, wheneve r batteries are install ed
and the wirel ess device is turned on (if it has an on/off switch).
X121691206mnl.indb 4 5/23/2008 1:17:18 PM
5
Keyboard and Mouse Devices
Health Warning
Use of a keyboar d or mouse may be linke d to serious injuries or disorders.
When using a computer, as with many activities, you may experience occasional discomfort in your hands,
arms, shoulders, neck, or other parts of your body. However, if you experience symptoms such as persistent
or recurring discomfor t, pain, thr obbing, aching, tingling, numbness, burning sens ation, or stiffness ,
DO NOT IGNORE THESE WARNING SIGNS. PROMPTLY SEE A QUALIFIED HEALTH PROFESSIONAL,
even if symptoms occur when yo u are not workin g at your computer. Symptoms like these can be associated
with painful and sometime s permanently disabling injuries or disorders of the nerves, muscles, tendons, or
other par ts of the body. Thes e musculoskeletal disor ders (MSDs) include carpal tunnel syndr ome, tendonitis,
tenosynovitis, and other conditions.
While rese archers are not yet able to answer many questions about MSDs , there is general agreement that
many factors may be linked to their occurrence, including: ove rall health, stress and how one copes with it ,
medical an d physical conditions, and how a person positions and uses his or her body dur ing work and other
activities (including use of a keyboard or mouse). The amount of time a person performs an activit y may also
be a factor.
Some guidelines that may help you work more comfortabl y with your computer and possibly reduce your
risk of experiencing an MSD can be found in the “Healthy Computing Guide” installed with this device’s
software. If this device did not come with software, you can access the “Healthy Computing Guide” at
www.microsoft .com/har dware or (in the United States onl y) by calling (80 0) 360-7561 to request a CD at
no charge.
If you have questions about how your own lifest yle, acti vities, or medical, or physical condition may be
related to MSDs, see a qualied health professional.
Devices with Laser Pointers
Caution Use of controls or adjustments, or performance of procedures other than those specied herein
may result in hazardous radiation exposure.
● Do not stare into beam.
● Do not shine a laser pointer at anyone. Laser pointers are designed to illuminate inanimate objects.
● Do not allow minors to use a pointer unsupervised. Laser pointers are not toys.
● Do not point a laser pointer at a mirror-like (reective) surface. A reected beam can act like a direct
beam on the eye.
● Do not disassemble the device.
● Do not use the device outside of its specied operating temperature range +41ºF (+5ºC) to +95ºF
(+35ºC). If the device is exposed to an environment outside of its prescribed operation, turn off
the device and allow the temperature to stabilize within the specied operating range before using
the device.
X121691206mnl.indb 5 5/23/2008 1:17:18 PM
6
All Devices
Do Not Attempt Repairs
Do not attempt to take apart, open, ser vice, or modify the hardware device or power supply. Doin g so could
present th e risk of electric shock or other hazard. Any evidence of any at tempt to open and/or modify the
device, including any peeling, puncturing, or removal of any of the labels, will void the Limi ted Warranty.
Choking Hazard
This device may contain small parts which may be a choking hazard to children under 3. Keep small par ts
away from children.
Usage and Cleaning
Use in accordance with these instructi ons:
● Do not use near any heat sources.
● Only use attachments/accessories specied by Microsoft.
● Clean only with dry cloth.
Keeping Cables Out of the Way of People and Pets
Arrange all cables and cords so that peopl e and pets are not likely to trip over or accidentally pull on them as
they move around or walk through the area. When th e product is not in use, you may need to disconnec t all
cables and cords from the fr ont and rear of the pr oduct to keep them out of the reach of children and pet s.
Do not allow children to play with cables and cords .
Laser and LED Specications
Caution Use of controls or adjustments, or performance of procedures other than those specied herein
may result in hazardous radiation exposure.
Laser Devices
This device complies with International Standard IEC60825-1:1993+A1+A2 (IEC 60825-1:2001-08) for a Class
1 and Class 2 laser product. This device also complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to L aser Notice No. 50, dated June 24, 20 07.
Class 1 Laser Devices
Beam descr iption: Collimated (parallel) beam of infra red light
(invisible to the user)
Laser power output: < 716 microwatts (at 832 nanometers) to
834 microwatts (at 865 nanome ters)
Emitted laser wavelen gth: nominal: 850 nanometers,
range: (832 – 865 nano meters)
A Class 1 laser pr oduct is safe under reasonably fores eeable conditions
of operatio n as describe d by IEC 60825-1 and 21 CFR 1040.10. However, it is recomme nded that you not
direct the laser beam (which is emitted fr om the bottom of the device) at anyone’s eyes.
CLASS 1
LASER PRODUCT
IEC 60825-1:2001-08
X121691206mnl.indb 6 5/23/2008 1:17:18 PM
7
Class 2 Laser Devices
Beam descr iption: Collimated (parallel) beam of light
Laser power output: < 1 milli watt
Emitted laser wavelen gth: 630 – 670 nanometers
This optical device has no serviceab le parts . The Class 2 laser
beam is emit ted from the fr ont of the device.
Optical (LED) Mouse
This product has been evaluated to comply with International Standard
IEC60825-1:1993+A1+A2 (IEC 60825-1:2001-08).
This product uses LEDs that are considered Class 1 (IEC60825-1:1993+A1+A2).
LED output power: < 67.8µW (photochemical limit), < 4. 2mW (thermal limit)
LED nominal wavelength: 470nm (blue), 635nm (red)
A Class 1 product is safe under reasonably foreseea ble conditions of operation as described by IEC 60825-1.
However, it is recommended that you not direct the light (which is emit ted from the bottom of the dev ice) at
anyone’s eyes.
This optical device has no serviceab le parts .
Regulatory Information
Tested to comply with FCC (U.S. Federal Communications Commission) Standards. For home or ofce use.
Not intended for use in machinery, medical, or industrial applications. Any changes or modications not
expressly approved by Microsoft could void the user’s authority to operate this device. This product is for use
with NRTL-Liste d (UL, CSA, ETL, etc.), and/or IEC/EN 60950 compliant (CE marked) Information Technology
equipment. No serviceable par ts included.
This device is rated as a commercial product for operation at +41ºF (+5ºC) to +95ºF (+35ºC).
This Class B digital apparatus complies with Part 15 of the U.S. Fe deral Communications Commission
(FCC) rules, Canadian ICES-003, RSS-Gen, RSS-210, and RSS-310. Operation is subject to the following two
condition s: (1) this device may not cause inter ference , and (2) this device must accept any inte rference
receive d, including interfere nce that may caus e undesired operation.
Complies with
IDA Standar ds
DB102868
Complies with
IDA Standar ds
DB100398
Class 1 LED product
X121691206mnl.indb 7 5/23/2008 1:17:18 PM
8
Radio Frequency Technical Specications
27 MHz Devices
Radio frequency (RF ) output power: < 54 dBµV/m at 3 m
Keyboard with two channe ls – RF frequen cies: 27.095 MHz (channel 1), 27.195 MHz (channel 2)
Keyboard with a single channe l – RF frequenc y: 27.195 MHz or 27.095 MHz
Mouse with t wo channels – RF fr equencie s: 27.045 MHz (channel 1), 27.145 MHz (channel 2)
Mouse with a sin gle channel – RF frequency : 27.145 MHz or 27.045 MHz
Bluetooth Devices
RF output power: meets Bluetooth® requirements
Frequenc y: 2,40 0 MHz to 2483.5 MHz
2.4 GHz Devices
Non-specic short range device
RF output power: Meets all SRD requirem ents
Frequenc y: within the range of 2,40 0 MHz to 2,483.5 MHz
Radio and TV Interference Regulations
The Microsoft hardware device(s) can radiate RF energy. If not installed an d used in stric t accordance with
the instructions given in the printed documentation and/or on-screen Help les, the device may cause
harmful interference with other radio-communications devices (for example AM/FM radios, televisions,
baby monitors, cordle ss phones, etc). There is, however, no guarantee that RF interfe rence will not occur in
a particular installation.
To determine if your hardware device is causing interference to other radio -communic ations devi ces,
disconne ct the device from your computer or remove the device’s batter ies (for a batte ry operated device).
If the interference stops, it was probably caused by the device. If the interfere nce continues after you
disconne ct the hardware device or remove the batteries, turn the computer of f and then on again. If the
interference stopped when the computer was off, check to see if one of the input/output (I/O) devices or one
of the computer’s internal accessory boards is causing the problem. Disconnect the I/O devices one at a time
and see if the interference stops.
If this hardware device does cause inter ference, try the following measure s to correct it:
● Relocate the antenna of the other radio-communications device (for example AM/FM radios, televisions,
baby monitors, cordle ss phones, etc.) until the inter ference stops.
● Move the hardware device farther away from the radio or TV, or move it to one side or the other of the
radio or TV.
● Plug the computer into a different power outlet so that the hardware device and radio or TV are on
different circuits controlled by dif ferent circuit breakers or fuses.
● If necessary, ask your computer dealer or an experienced radio-TV technician for more suggestions.
For more information about interfer ence issues, go to the FCC Web site at:
http://ww w.fcc.gov/cgb/consum erfac ts/inter ference.html.
You can also call the FCC at 888-CAL L FCC to request Interference and Telephone Interference
fact sheets.
X121691206mnl.indb 8 5/23/2008 1:17:18 PM
9
For Bluetooth and 2.4 GHz devices only: To comply with FCC RF exposure requirements, the following
operating congurations must be satised: the antenna has been installed by the manufacturer and no
changes can be made. The wireless devices must not be co-located or op erating in conjunction with any
other antenna or transmitter. Except for headset and handheld devices, wireless devices must be at least
20 cm between the antenna of wir eless device and all persons.
For 802.11 devices only:
This product is restricted to indoor use only to reduce any potential for harmful
interference with licensed operation in the 5.15 to 5.25 GHz frequenc y range.
Microsof t Corporation; One Microsoft Way; Redmond, WA 98052-6399; U.S.A.
United States: (800) 426-9400; Canada: (800) 933-4750
Disposal of Waste Batteries and Electrical & Electronic Equipment
This symbol on the produc t or its batteries or its pack aging means that this produc t and any
batteries it contains must not be disposed of with your household was te. Instead , it is your
respons ibility to han d this over to an applic able collec tion point for th e recycling of batterie s and
electr ical and elec tronic equipment. This separate collection and re cycling will help to conser ve natural
resources and prevent potential negative consequences for hum an health and the environment due to
the possible presence of hazardous substances in batterie s and electr ical and electronic equipment, which
could be caused by inappropriate disposal. For more information about where to drop of f your batteries
and electrical and electronic waste, please contact your local city/municipality ofce, your household waste
disposal service, or the shop where you purchased this product. Contact we ee@microsoft.com for additional
information on WEEE and waste batteries.
Statement of Compliance with EU Directives
Hereby, Micro soft Corporation declares that this pr oduct is in compliance with the es sential requirements
and other relevant provisions of Direc tives, 20 06/95/EC, 2004/108/ EC and 1999/5/EC.
The technic al document ation as required by the Conformity Ass essment procedure is kept at th e following
address :
Company: Microsof t Ireland Op erations Ltd.
Address: Atrium Buildin g Block B
Carmenhall Road, Sand yford Industrial Estate, DUBLIN 18
Country : Ireland
Telephone number: +353 1 295 3826
Fax number: +353 1 706 4110
Internet : http://ww w.microsoft.com/ ireland/
Patent Information
United States and/or international patent s pending.
X121691206mnl.indb 9 5/23/2008 1:17:19 PM
10
Customer Support Options
If you have a question about your Microsoft har dware product, do the following:
● Check the sys tem requirements for your product (located on the pa ckaging) to ensure that your sys tem
is compatible.
●
Read through all printed documentation.
●
For additional product information , go to the Microsof t Hardware Web site at
www.microsoft .com/har dware.
●
For up-to-date help about using or trouble shooting your device, go to the Micr osoft Help and Support
Web site at http://support.microsoft.com.
If you still have a que stion, see the following Microsoft sup port options.
Product Name: Microsoft Hardware Devices
OEM Distributed: If this product came with a new computer or device, the hardware manufacturer provides
technical support. Please conta ct your manufa cturer directly for support.
Self-Help Support: Search our Knowledge Base, watch videos for solv ing common problems, and download
available up dates by visiting http://suppor t.micros oft.com.
Chat and E-mail: Chat immediately, or send an e-mail message to a Microsoft Sup port Professional by
visiting ht tp://support .microsof t.com.
Note that e-mail response may be delayed by several hours.
Phone Support: In the United States, call (866) 833-7088
In Canada, call (800) 876-8533
For all other regions, see the “International Technical Support Numbers”
later in this section.
TTY Users:
In the United States, call (800) 892-5234
In Canada, call (866) 857-9850
For all other regions, see the “International Technical Support Numbers”
later in this documentation.
Conditions: Microsof t suppor t services are subjec t to then-curr ent prices, terms, and con ditions,
which are subject to change without notice. Toll charges may apply to all non-toll-fre e
numbers listed.
Note For regional suppor t policy details and more, go to http://support.microsoft.com/international.aspx
and select your country or region from the list. If there is no Microsoft subsidiary ofce in your country or
region, please contact the establishment from which you obtained your Microsoft product.
X121691206mnl.indb 10 5/23/2008 1:17:19 PM
11
Limited Warranty
IMPORTANT—PLEASE READ THIS LIMITED WARRANTY CAREFULLY TO UNDERSTAND YOUR RIGHTS AND OBLIGATIONS!
The term “Hardware Device” means the Microsoft hardware product. The term “You” means either an individual or a single
legal entit y who will be referred to in this Limited Warranty as “You” and “Your”.
A. WARRAN TIES.
1. Express Warranty. Subject to the terms and conditions of this Limited Warranty and in lieu of any other (if any) express
warrantie s, Microsof t warrants tha t under normal us e and service, on the date of acquis ition as shown on Your receipt or
similar proof of payment and for the next i) 90 days for the SOFTWARE and ii) period of time stated below for the applicable
Hardware Device (hereafter each dened as the “Warranty Period”), that the SOFTWARE and Hardware Device will
substant ially conform wi th the accompany ing Microsof t packaging an d documentation. As to any defec ts discover ed after
the Warrant y Period, ther e is no warranty or co ndition of any kind .
Warranty Period:
Xbox 360 Accessories for Windows; Microsoft LifeChat ZX-6000: Ninety (90) day warranty.
Microsof t LifeChat L X-2000: One (1) year
LifeCam VX-500; LifeCam VX-700; Comfort Optical Mouse 3000; Compact Optical Mouse 500; Wheel Mouse Optical: Two
(2) years
IntelliMou se® Optical; Wireless IntelliMouse Explorer; IntelliMouse Explorer for Bluetooth; Wireless IntelliMouse Explorer
with Finger print Reader : Five (5) years
Microsof t Fingerpri nt Reader: Thr ee (3) years
Microsof t Presenter 3 000: Thre e (3) years
Microsof t LifeChat L X-3000: Thre e (3) years
For all other Microsoft webcams (excluding the Microsoft Xbox Live Vision Camera): Three (3) years
For all other Micr osoft keyb oard and mouse de sktop set s: Three (3) years
For all other Micr osoft keyb oard devices : Three (3) years
For all other Micr osoft mous e devices: Thr ee (3) years
This Limite d Warranty does n ot cover, and no warrant y of any kind is prov ided with resp ect to any subjec tive or aesth etic
aspects of the Hardware Device or SOFT WARE. The express warranty stated above is the only express warranty made to You
and is provided in lieu of all other express or implied warranties and conditions (except for any non-disclaimable implied
warranties that exist), including any created by any other document ation or packaging. No information or suggestions (oral
or in a record) given by Microsof t, its agents, afliates or suppliers or its or their employees or agents , shall create a warranty
or condition or expand the scope of this Limited Warranty. The “Governing Law; Exclusive Forum” provision of Part 2 of the
Agreeme nt applies to this Limi ted Warranty and is incorpora ted herein by this r eference.
2. Limitatio n on Duration of Impli ed Warranties . If You are a consumer, You may also have an impl ied warrant y and/or
condition un der the laws of some ju risdictio ns, which is here by limited to the dura tion of the Warrant y Period. Some
jurisdic tions do not allow lim itations on how lo ng an implied warranty or condition lasts, s o the foregoing li mitation may not
apply to You.
B. EXCLUSIVE REM EDY. Subject to applicab le law and the follow ing, and provi ded that You return the S OFTWARE and
Hardware D evice to Your place of acqui sition (or, if that place will not accept the retu rn, to Microsof t) with a copy of Your
receipt or other bona de proof of payment during the Warranty Period, Microsof t will, at its option and as Your exclusive
remedy fo r breach of this Limit ed Warranty and any implied warra nties:
X121691206mnl.indb 11 5/23/2008 1:17:19 PM
12
repair or replace all or part of the defective SOFTWARE or the defective Hardware Device; or
make payment to You for th e allowable damages that You incurred in reasonable re liance, but onl y up to the amount You
paid (if any) for th e SOFTWARE and/or the Hardware De vice less rea sonable depr eciation bas ed on actual use .
The above rem edy is subjec t to the following:
Any repaire d or replaced SO FTWARE or Har dware Device w ill be new or refurbished or ser viceably us ed, comparab le in
function and performance to the original Hardware Device (or SOFTWARE), and may include third party items;
Any SOFT WARE or Hardware Device repair ed or replaced under this Limite d Warranty will be wa rranted for the remainder
of the original War ranty Perio d or 30 days from the dat e of shipment of the item b ack to You, whichever is lon ger. If an
upgrade to SOF TWARE is deli vered with a new limited warrant y, then the terms of that n ew limited warra nty will apply o nly
to the SOFTWARE as upgraded, but will not apply to the original Hardware Device;
Except as otherwise required by legislation in Your jurisdiction, costs associated with transpor t (including packaging) for
warranty service shall be at Your expense; and
Microsof t does not provide any warrantie s regarding any other servi ces provide d under this Limite d Warranty and dis claims
all duties (if any) of workmanlike ef fort or of lack of ne gligence re garding such ser vices.
C. EXCLUSION OF OTHER DAMAGES. TO THE FULL EXTENT ALLOWED BY LAW, MICROSOFT AND ITS SUPPLIERS, AFFILIATES
AND AGENTS ARE NOT LIABLE FOR ANY:
(i) CONSEQUENTIAL OR INCIDENTAL DAMAGES;
(ii) DAMAGES OR LOSS OF ANY NATURE WHATSOEVER RELATING TO LOST PROFITS, BUSINESS INTERRUPTION, LOSS OF
DATA OR PRIVACY OR CONFIDENTIALIT Y, ANY INABILIT Y TO USE ALL OR PART OF THE HARDWARE DE VICE OR SOFT WARE,
PERSONAL INJURY, OR ANY FAILURE TO MEET ANY DUT Y (INCLUDING BUT NOT LIMITED TO ANY DUTY OF NEGLIGENCE,
GOOD FAITH OR OF WORKMANLIKE EFFORT); OR
(iii) INDIRECT, SPECIAL, OR PUNITIVE DAMAGES ARISING OUT OF OR RELATING IN ANY WAY TO THE SOFTWARE OR
HARDWARE DEVICE. THE FOREGOING APPLIES EVEN IF MICROSOFT OR ANY SUPPLIER, AFFILIATE OR AGENT HA S BEEN
ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES; AND EVEN IN THE EVENT OF FAULT, TORT (INCLUDING
NEGLIGENCE), STRICT OR PRODUCT LIABILITY, MISREPRESENTATION OR OTHER RE ASON.
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusions many not apply to You.
D. EXCLUSIONS FROM COVER AGE. This Limited Warranty shall not apply and Microsoft has no liability under this Limited
Warranty if th e SOFTWARE or Ha rdware Devi ce:
- is used for commercial purposes (including rental or lease) or purposes beyond the scope of the SOFTWARE license;
- is modied or tampered with;
- is damaged by Acts of God, power surge, misuse, abuse, negligence, accident, wear and tear, mishandling, misapplication,
or other causes unrelated to defects in the Hardware Device or the SOFTWARE;
- is damaged by programs, data, viruses, or les, or during shipments or transmissions;
- is not used in accordance with the accompanying documentation and use instructions; or
- is repaired, modied or altered by other than a Microsoft authorized repair center and the unauthorized center causes or
contributes to any defect or dam age.
This Limite d Warranty does n ot include any warranty regarding legal right s or abilities, such as any warrant y regarding tit le,
quiet enjoym ent or lack of infrin gement.
X121691206mnl.indb 12 5/23/2008 1:17:19 PM
13
E. REGISTR ATION. You need not register Your acquisition of the SOFTWARE and Hardware Device for the Limited Warranty
to be effec tive.
F. BENEFICIARY. To the extent allowed by applicable law, the Limited Warrant y is only made to You, the r st licensed user
of the SOFTWARE or purchaser of the Hardware Device, and there are no third part y beneciaries of the Limited Warranty.
Except as required by law, this Limited Warranty is not intended for and does not apply to anyone else, including anyone to
whom You make any transf er as authoriz ed in the Agreeme nt.
G. FURTHER INFORMATION. Microsoft is the warrantor under this Limited Warranty. To receive instructions for obtaining
perfor mance of this Limit ed Warranty You must e ither contac t the Microsof t subsidiar y servin g Your country, or write to:
Microsof t Sales Inform ation Center, One Micr osoft Way, Redmon d, WA 98052-6399, USA , or visit Microsoft on the Wor ld
Wide Web at http: //www.microsoft.com .
You must also:
1. Submit proof of payment in the form of a bona de, dated receipt, or invoice (or a copy) evidencing that You are the
beneciary of this Limited Warranty and that Your request for a remedy is made within the Warranty Period;
2. Follow Micros oft’s shipp ing and other ins tructions if i t determines th at all or part of Your Hardw are Device or SOF TWARE
requires r eturn. To obtain the Lim ited Warrant y perform ance, You must take or del iver the item in eith er its original
packaging or packaging that provides an equal degree of protection to the location specied by Microsoft. Except as
otherw ise require d by legislation in Your jurisdiction , costs assoc iated with trans port (incl uding packagi ng) for warrant y
service shall be at Your expense.
3. Delete or remove any les or data You consider private or condential prior to sending the item to Microsoft.
Failure to follow th e above instru ctions may res ult in delays, ca use You to incur additional charges, or may vo id Your
warrant y.
This Limited Warranty gives You specic legal rights and You may also have other rights which var y from jurisdiction to
jurisdic tion. Where any te rm of this Limited War ranty is prohibited by such laws , it shall be null and void, but the remaind er
of the Limited Warranty shall re main in full force an d effect if it s allocation of r isks is not mater ially disturbed.
Informatio n in this document, in cluding URL and othe r Internet Web si te reference s, is subject to chan ge without notice. Unless
otherwi se noted, the example companies, organiz ations, products, domain names, e- mail addresses, logos , people, places, and eve nts
depicted h erein are ctitious, and n o associati on with any real company, organization, produc t, domain name, e-mail addre ss, logo,
person , place, or event is inte nded or should be inf erred. Compl ying with all applic able copyright laws is the resp onsibility of the user.
Without limi ting the rights und er copyright, no p art of this docume nt may be reproduced, stor ed in or introduced in to a retrieva l system,
or transmit ted in any form or by any means (electro nic, mechanical, photo copying, recording, or ot herwise), or fo r any purpose, with out
the express w ritten permission of Microsoft Corp oration.
Microsof t may have patent s, patent applications , trademark s, copyrights , or other intellectual pro perty rights cover ing subject matter in
this document . Except as expressly provided in any writ ten license agreement fr om Microsoft, the furnishing of this docume nt does not
give you any licens e to these pate nts, tradema rks, copyri ghts, or other intellect ual propert y.
Microsof t Corporati on grants the purchaser of this pr oduct the right to reproduc e one (1) copy of this use r manual for each Hard ware
Device you pur chased in the packa ge.
© 2008 Micros oft Corporation. All ri ghts reser ved.
Microsof t, IntelliEye, IntelliMous e, and Windows are either re gistered tra demarks or tra demarks of Micr osoft Corpo ration in the United
States and/or othe r countries.
Bluetooth is a re gistered trademark of Bluetooth SIG, Inc.
All other trade marks are propert y of their respective own ers.
X121691206mnl.indb 13 5/23/2008 1:17:19 PM
14
M
Guia do Produto da Microsoft
Leia este guia para obter infor mações importante s sobre segur ança e saúde e sobre os termos da
Garantia que se aplicam ao dispositivo da Microsoft® adquirido por você.
Aviso: se este produto não for instalado, utilizado e manuseado com cuidado, os riscos de lesões graves
ou morte, ou ainda de danos ao(s) dispositivo(s), serão maiores . Leia este guia e guarde todos os guias
impress os para refer ência futura. Para obter guias de substituiç ão, vá para
www.microsoft .com/har dware ou consulte a seção Ajuda e Suporte da Micr osoft par a obter
informações de contato.
Este documento contém informações imp ortantes sobre diver sos produtos da Microsof t. Consulte as
seções que se aplicam aos re cursos do seu dispositivo:
Informa ções impor tantes sobre segurança
Dispositivos de corrente alternada
Dispositivos que usam pilhas
Dispositivos de headset
Dispositivos de webcam
Dispositivos sem o
Dispositivos de teclado e mouse
Dispositivos com apont adores a laser
Todos os dispositivos
Especicações de laser e LED
Informações normati vas
Especicações técnicas de radiofreqüência
Regulamentações de interferência em rádio e TV
Descar te de resíduos de pilhas e equipamentos elétr icos e eletrônicos
Declaração de conformidade com as diretivas da UE
Informações sobre patentes
Opções de atendimento ao cliente
Garantia Limitada
Este símbolo identica mensagens de segurança e saúde neste Guia do Pro duto e em
outros manuais.
Informações importantes sobre segurança
Dispositivos de corrente alternada
Estas precauções aplicam-se a todos os produtos que são conec tados a uma toma da padrão.
Se as seguintes precauções não forem tomadas, poderão ocorr er lesões graves ou morte devido a
choque elétrico ou fogo, ou ainda danos ao dispositivo.
X121691206mnl.indb 14 5/23/2008 1:17:19 PM
15
Para selecionar uma fonte de alimentação apropria da para seu dispositivo:
● Use apenas a unidade de fonte de alimentação e o o de corrente alternada fornecidos com o dispositivo
ou recebidos de um centro autorizado de assistência té cnica.
● Verique se sua tomada está de acordo com o tipo de alimentação indicado na unidade de fonte de
alimentação (quanto à voltagem [V] e à freqüência [Hz]). Se você não tiver certeza quanto ao tipo de
alimentação presente em sua casa, consulte um eletricista de sua conança.
● Não utilize fontes de alimentação não padrão, como geradores ou inversores, mesmo que a voltagem
e a freqüência lhe pareçam aceitáveis. Utilize apenas a fonte de corrente alternada fornecida por uma
tomada padr ão.
● Não sobrecarregue a tomada, a extensão, o ltro de linha ou outro receptáculo elétrico. Verique a
capacidade de suportar a corrente total (em amperes [A]) exigida pelo dispositivo (indicada na unidade
de fonte de alime ntação) e por quaisquer outros dispositivos que estejam no mesmo circuito.
Para evitar danos aos os elétricos e à fonte de alime ntação:
● Não deixe que os os elétricos sejam pisados.
● Evite que os os sejam torcidos ou excessivamente dobrados, principalmente no ponto de conexão com
a tomada, a unidade de fonte de alime ntação e o dispositivo.
● Não puxe, dê nós, dobre em excesso nem faça algum outro uso não indicado dos os elétricos.
● Não exponha os os elétricos a fontes de calor.
● Mantenha crianças e animais longe dos os elétricos. Não os deixe morder nem mastigar os os.
● Ao desconectar os os elétricos, puxe-os pelo conector — e não pelo o.
Se um o elétrico ou uma fonte de alimentação for danicado de alguma forma, interrompa imediatamente
o uso. Descon ecte seu dispositivo durante tempestades com raios ou quando não for utilizá-lo po r
longos períodos.
Para dispositivos que possuem um o de corrente alternada conectado à fonte de alimentação, siga sempre
as seguintes instruções para conectar o o elétrico:
1 Conecte o o de corrente alternada à fonte de alimentação até o m.
2 Conecte a outra extremidade do o de corrente alternada na tomada.
Dispositivos que usam pilhas
Estas precauções aplicam-se a todos os produtos que usam pilhas recarregáveis ou descartáveis .
O uso não apropriado de pilhas pode resultar em vazamentos do uido das pilhas, superaquecimento ou
explosão. O uido liberado pelas pilhas é corrosivo e pode ser tóxico. Ele pode causar queimaduras na pele e
nos olhos e pode ser prejudicial se ingerido.
Para diminuir o risco de les ões:
● Mantenha as pilhas fora do alcance das crianças.
● Não aqueça, abra, perfure, danique nem descarte as pilhas no fogo.
● Não misture pilhas velhas com novas, nem pilhas de tipos diferentes (por exemplo, pilhas de zinco-
carbono e alcalinas).
X121691206mnl.indb 15 5/23/2008 1:17:19 PM
Loading...