Microseven Systems MSSH-DVS4CH Operation Manual

P

M

S

rod

u

H-DV

ct

O

S4CH

4

pe

CH N

e

Micr

W

a

rati

o

twork

oseven S

y

a

lnut, Californi

a

n

M

Digital

stems, L

L

91789, USA

an

u

Video

C

al

Server

Microseven® MSH-DVS4CH 4CH Network Digital Video Server

© 2002-2009 Microseven Systems, LLC. All Rights Reserved.

- 2 -

First Edition (July 2009)

Copyright Notice

Copyright © 2002-2009 Microseven Systems, LLC
All Rights Reserved.

Microseven Systems, LLC provides this operation manual “as is” without warranty of any kind, either
express or implied, including, but not limited to the implied warranties of merchantability and fitness
for a particular purchase. Microseven Systems, LLC may make improvements and/or changes in the
product(s) and/or the program(s) described in this manual at any time and without notice.

This publication could contain techni ca l inacc urac i es or ty pographical errors. Changes are mad e
periodically to the information herein; these changes will be incorporated in new editions of this
publication.

Microseven Systems, LLC

404 Lemon Ave, Suite 9
Walnut, California 91789, USA

TEL (909) 348 – 5577
FAX (909) 598 – 8553
Email [e-mail]
Website www.microseven.com

Trademarks

Any product names used herein are for identification purposes only and may be trademarks of their
respective companies. Microseven is a registered trademark of Microseven Systems, LLC.

Microseven® MSH-DVS4CH 4CH Network Digital Video Server

© 2002-2009 Microseven Systems, LLC. All Rights Reserved.

- 3 -

Notes:

Please read the following label before connecting or operating the equipment.

The lightning flash with arrowhead symbol,
within an equilateral triangle, is interned to
alert the user to the presence of un­insulated “dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to people.

The serial number of this product can be
found on the top of the unit. Please
note the serial number of this unit in the
space provide and retain this book
as a permanent record of your purchase to
aid identification in the event of
theft.

Model ____________________________

Product № ________________________

The exclamation point within an equilateral
triangle is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions in
the literature accompanying the
appliance.

Notes:
Please not move th e cover (or back) to reduce
the danger of electric shock. No part inside
can be repaired by users. Refer servici ng to
qualified personnel.

Microseven® MSH-DVS4CH 4CH Network Digital Video Server

© 2002-2009 Microseven Systems, LLC. All Rights Reserved.

- 4 -

Contents

1. Preface ……………………………………………………………………………………….. 5

2. Notes ……………………………………………………………………………………… 5

3. Instructions of Main Parts ……………………………………………………………… 6

4. Setup & Application ………………………………………………………………..……… 7

5. Basic System Diagram and Operating Circumstance ………………………………… 10

6. Specification ……………………...…………………………………………………… …… 13

Microseven® MSH-DVS4CH 4CH Network Digital Video Server

© 2002-2009 Microseven Systems, LLC. All Rights Reserved.

- 5 -

1. Preface

MSH-DVS4CH 4CH network digital video server is a digital product based on network
transmission, which adopts embedded real-time multi-tasking operating systems (RTOS) and
embedded CPU processor, and with the function of video signal and audio signal synchronization
compression.

The compressed data is transmitted by network to realize real-time video and audio preview. The
system can be scheduled efficiently. Code solidify in FLASH enables more stable and reliable
system operation.

The excellent H.264 algorithm ensures less data redundancy, which is more suitable for network
transmission, provide RS-485 interface and alarm input and output interfaces.

2. Notes

A. The video is designed for indoor application, and is not water-proof, damp-proof and

lightening-proof;

B. Keep away from the high-temperature objects and places
C. Do not share the same power supply wire or socket with the high-power electronic appliances.

D. Do not install or dismantle camera cables before the power is cut off.
E. Do not open the box without the presence of professional personnel, and please contact

qualified ones if any malfunction happens.

F. Make sure the camera works under the specified voltage to avoid the damage because of

non-matching voltage.

G. Please disconnect the power adapter if the camera is kept for non-using for a long time.

Microseven® MSH-DVS4CH 4CH Network Digital Video Server

© 2002-2009 Microseven Systems, LLC. All Rights Reserved.

- 6 -

3. Instructions for Main Parts

3.1 Appearance (Unit: in)

3.2 Front Parts

Microseven® MSH-DVS4CH 4CH Network Digital Video Server

© 2002-2009 Microseven Systems, LLC. All Rights Reserved.

- 7 -

① Power Indicator
② Alarm Indicator
③ Wireless module antenna
④ Analog Audio Output
⑤ Intercom Input
⑥ Network Indicator
⑦ SD Card Status Indicator
⑧ Reset Default Value
⑨ USB Port
⑩ SD Card Slot
⑪ Power In

Indicator Status

POWER（Red）

Normal-On Power on
Normal-Off Power off

EtherNet（Green）

Normal-On Network connected
Normal-Off Network disconnected

ALARM（Red）

Normal-On Alarm signal
Normal-Off No alarm signal

SD（Green）

Normal-On SD card working
Normal-Off SD card not working

RST Reset Keep pressing the button to reset

4. Setup & Application

4.1 SD Card Installation

SD card standard: A. dimension (32mm × 24mm × 21mm standard)

B. 512M, 1G, 2G, 4G;
C. No less than 6 MB/S for read-write speed

Recommended SD card: Sandisk UltraII 2G, Lenovo 133X 2G

The installation of the SD card is as follows:

Microseven® MSH-DVS4CH 4CH Network Digital Video Server

© 2002-2009 Microseven Systems, LLC. All Rights Reserved.

- 8 -

Do according to the card, first open the SD card cover (from the right side), and insert the
card.

4.2 Rear Parts

Microseven® MSH-DVS4CH 4CH Network Digital Video Server

© 2002-2009 Microseven Systems, LLC. All Rights Reserved.

- 9 -

① 4CH Video Input
② 4CH Video Input Indicator
③ 4CH Audio Input
④ Alarm Input/Output & RS485 Port
⑤ Network RJ45 Port

4.3 Alarm Port and RS485 Port

A. Alarm input/output and RS485 port definition

① RS485 Port
② 2CH Alarm Output
③ 4CH Alarm Input
④ Alarm Input Public Terminal
⑤ Alarm Input (A)
⑥ Alarm Input (B)

Microseven® MSH-DVS4CH 4CH Network Digital Video Server

© 2002-2009 Microseven Systems, LLC. All Rights Reserved.

- 10 -



5. Basic System Diagram and Operating Circumstance

5.1 Operating environment

After the equipment installed and connected to the network, it should be operated on Server
Software Platform of Microseven Digital Video Server.

Microseven® MSH-DVS4CH 4CH Network Digital Video Server

© 2002-2009 Microseven Systems, LLC. All Rights Reserved.

- 11 -

5.2 Camera Installation

" Please check whether the product and accessories are complete.

①

Network video server 1pc

②

Network video server 1pcs

③

Power cable 1pcs

④

Network cable 1pcs

⑤

Operation manual 1pcs

⑥

Software CD 1pc

Step 1 Checking product and accessories
Step 2

Install the devices accordingly

Step 3

Connect to network by RJ45 port

Step 4

Connect video source to video input port

Step 5

Connect audio source with audio input

Step 6

Connect dome camera or PTZ To RS-485 port

Step 7

Connect alarm device to alarm port

Step 8 Supply power, equipment running.

Video server A

Video server B

NetWork

Monitoring
center 1

Alarm input
de icev

OPEN

L

O

C

K

RS485 T x

（－）

RS485 Tx

（＋）

High speed
dome camera

Microphone

Monitor

Loudspeaker

Alarm output
de icev

Alarm input
de icev

Alarm output
de icev

Monitoring
center

2

Monitoring
center N

Microseven® MSH-DVS4CH 4CH Network Digital Video Server

© 2002-2009 Microseven Systems, LLC. All Rights Reserved.

- 12 -

5.3 Port Connection

A. Insert the crystal connector;
B. Connect analog video source with BNC port;
C. Connect audio receiver with BNC audio input port;
D. RS485 and 6 Pin alarm IO, RS485 can connect PTZ camera or dome camera.

Connect alarm sense organ with alarm port, alarm output cam control one assistant

device;
E. Connect the power of DC 12V / 2A;
F. Audio output can connect speaker;
G. Line-in port for microphone and transmitter;
H. Insert SD Card to the slot

⑴Network Port

⑵RS485 & Alarm Port

⑶ ⑸ ⑺ ⑼ 4CH Audio Input

⑷ ⑹ ⑻ ⑽ 4CH video input port

⑾ Audio Output Port

⑿ Audio Input Port

⒀ Power Port

Microseven® MSH-DVS4CH 4CH Network Digital Video Server

© 2002-2009 Microseven Systems, LLC. All Rights Reserved.

- 13 -

Connect alarm input in the above fig to alarm sense organ. Alarm output is independent, which can
control one output device. Audio input can connect to audio receiver, while audio output can connect
to louder-speaker. Video input port connects to analog video source, and connect to network.

6. Specifications

Model

MSH-DVS4CHD

Video In/Out 4 Channels
Video Source System PAL / NTSC
Audio Input 4 Channels
Video Compression Format H.264
Bit Stream 64 Kbps - 1 Mbps, CBR/VBR adjustable
Peripheral Port One 10/100Mbit Ethernet Interface (RJ45 Interface), One RS485 interface

Network Protocol

TCP/IP, UDP/IP, HTTP, ICMP, Telnet, IGMP, PPPOE, DDNS, DNS,
DHCP, WIFI

Resolution

CIF:352*288 (PAL), 352*240 (NTSC)
QCIF: 176*144 (PAL), 176*120 (NTSC)

Transmission Rate 25 fps (PAL), 30 fps (NTSC)
Alarm Input 4 channels
Alarm Output 2 channels (terminal output, NO/NC trigger DC24V. 1A/AC120V,1A)
Motion Detection 12x16 detection areas and 9 sensitivity levels
Wireless Support IEEE 802.11b/g wireless network

User Management

Multi-level user management, and also more than one user have the
access to the equipment at the same time

Temperature -10°C - +50°C
Humidity 5~90%
Power Supply DC12V, 600MA, ＜5W
Dimensions 6.69 in (L) X 4.41 in(W) X 1.85 in (H)
Weight 1.21 lb
Technical Support SDK, allows second development