©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
User Manual – Entry Line
Industrial Gigabit Ethernet Switch
8x 10/100/1000Base-T with PoE+
Gigabit Ethernet Switch with PoE+ for Industrial Use Page 2/11
©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
Table of Contents
General ................................................................................................................................ 3
Benefits................................................................................................................................ 3
Front View ........................................................................................................................... 4
LED Display ......................................................................................................................... 4
Dimensional Drawings....................................................................................................... 5
Mounting ............................................................................................................................. 6
Power Supply / Alarm Contact ........................................................................................ 8
Twisted Pair Connections .................................................................................................. 8
Technical Specifications .................................................................................................... 9
Standard Compliance .......................................................................................................10
Safety Notes ......................................................................................................................10
Order Information .............................................................................................................11
Accessories ........................................................................................................................11
Gigabit Ethernet Switch with PoE+ for Industrial Use Page 3/11
©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
General
The IP protocol has already left the in-house environment and is going to take all
remaining communication areas. Industrial Ethernet already is an established
idea, describing the reliable use of Ethernet components in harsh environments.
Because of the large number of these applications, the market requires simple
and also reliable and cost effective products. With the new Industrial Ethernet
Entry Line MICROSENS fulfils these requirements. The products are very compact
and include:
• 5 and 8 port Fast Ethernet switches
• 6 and 8 Port Gigabit Ethernet switches
• Switches with fiber-uplink
• Media converter for Fast Ethernet and Gigabit Ethernet
• Device Server for the conversion of serial interfaces
(RS-232/422/485) to IP.
All new devices distinguish themselves with easy handling (plug & play) and do
not need extensive configuration. New developments are focusing on increasing
the port numbers and further implementation of Gigabit Ethernet.
Benefits
System Interface/Performance
8x10/100/1000Base-T PoE+ (PSE) ports
Supports PSE based on IEEE 802.3af and IEEE 802.3at standards
up to 30 Watts per port
Supports auto-negotiation and auto-MDI/MDI-X
Supports store-and-forward architecture
Non-blocking data transmission
Supports 9 kB Jumbo Frames
Back-plane (Switching Fabric): 16 Gbps
1 MB Packet Buffer
8K MAC Address Table
Alarm output relay for power failures
Power Supply
12..56 VDC Redundant Dual Power Input
44..56 VDC for PoE operation
Overload current protection
Reverse polarity protection
Chassis/Installation
IP-30 Protection
DIN-rail and Wall Mount Design
Gigabit Ethernet Switch with PoE+ for Industrial Use Page 4/11
©2017_MICROSENS GmbH & Co. KG_Küferstr. 16_59067 Hamm/Germany_www.microsens.com
Front View
LED Display
There are diagnostic LED indicators located on the front panel of the industrial
switch. They provide real-time information of system and operational status. The
following table provides description of the LED status and their meanings for the
switch.
LED
Color
Status
Meaning
P1
Green
On
Power 1 is active
Off
Power 1 is inactive
P2
Green
On
Power 2 is active
Off
Power 2 is inactive
RLY
(Relay)
Amber
On
Power failure (Relay status) P1 or P2 off
Off
No failure
Port 1-8
(Lnk/Act)
Green
On
Valid link established
Off
No link established
Flashing
The port is transmitting or receiving data
packets
Port 1-8
(PoE)
Amber
On
POE End Device is detected
Off
No POE End Device detected
Loading...