Microsemi PD-IM-7508, PD69108, PD39100 User Manual

PD-IM-7508 Evaluation Board - User Guide

PD-IM-7508

Evaluation Board User Guide

Including:

PD69108 – PoE Manager

PD39100 – PoE Controller

Security Status: Restricted

PRODUCTION DATA: Information contained in this document is proprietary to Microsemi and is current as of

publication date. This document may not be modified in any way without the express written consent of Microsemi.
Product processing does not necessarily include testing of all parameters. Microsemi reserves the right to change
the configuration and performance of the product and to discontinue product at any time.

PD-IM-7508 Evaluation Board - User Guide

Reference Documents

 IEEE 802.3af-2003 Standard, DTE Power via MDI
 IEEE802.3at-2009 Standard, DTE Power via MDI
 PD69108 datasheet, catalog number DS_PD69108
 PD39100 datasheet, catalog number DS_PD39100
 PD70200 datasheet, catalog number DS_PD70100_PD70200
 Application note 206: Designing an 8-port with PD39100 & PD69108 (802.3af/802.3at

Compliant), catalog number PD39100_PD69108_AN206

 Application note 186: Layout Design Guidelines for PD69108/PD69104 PoE Systems,

catalog number 06-0081-080

 PD63000/G & PD69000 & PD69100 Serial Communication Protocol User Guide , catalog

number PD63000_UG

 Software GUI user guide catalog number 06-0027-056

The above documents can be obtained via Microsemi customer support. To access other documents, go to our
website at http://www.microsemi.com/, and under Tech Support\Documentation look up the relevant documents.

Copyright © 2013
Rev 0.1 / 04 Aug 2013 Analog Mixed Signal Group

1 Enterprise, Aliso Viejo, CA 92656, USA; Phone (USA): [phone], (ROW): [phone] Fax: [phone]

Microsemi

2

PD-IM-7508 Evaluation Board - User Guide

Table of Contents

1 About this Guide ................................................................................................................................... 4

1.1

Objectives .................................................................................................................................... 4

1.2

Audience ...................................................................................................................................... 4

1.3

Organization ................................................................................................................................. 4

2 Introduction ........................................................................................................................................... 5

2.1

Hardware Block Diagram Description .......................................................................................... 6

2.2

Evaluation Board/System Ordering Information .......................................................................... 6

2.3

Evaluation System Features ........................................................................................................ 6

2.4

Evaluation System Interfaces & Connections .............................................................................. 7

3 Physical Description ............................................................................................................................. 8

3.1

Switches ....................................................................................................................................... 8

3.1.1 Reset Button ........................................................................................................................... 8

3.1.2 Power Good Dip Switch .......................................................................................................... 8

3.2

Connectors ................................................................................................................................... 8

3.2.1 Connectors Table ................................................................................................................... 8

3.2.2 Connectors Detailed Explanation ........................................................................................... 9

3.3

Led Indications ........................................................................................................................... 12

4 Electrical Characteristics .................................................................................................................... 13

5 Installation ........................................................................................................................................... 14

Copyright © 2013
Rev 0.1 / 04 Aug 2013 Analog Mixed Signal Group

1 Enterprise, Aliso Viejo, CA 92656, USA; Phone (USA): [phone], (ROW): [phone] Fax: [phone]

Microsemi

3

PD-IM-7508 Evaluation Board - User Guide

1 About this Guide

1.1 Objectives

This user guide provides both a description and operation procedures for Microsemi's PD-IM-7508 evaluation
system. This system is used to evaluate the performance of 8 port PoE applications.

1.2 Audience

This user guide is intended for qualified personnel, meaning operators and technicians who have a background in
basic electronics.

1.3 Organization

This guide is divided into several sections:

Chapter 1
Chapter 2

Chapter 3

Chapter 4

Chapter 5

“About this Guide” which describes the objectives, audience and organization.
“Introduction” which gives an overview of the main functions, features, physical characteristics,

and ordering information.
“Physical Description” which provides a physical description of the components (switches,
jumpers, connectors).
“Electrical Characteristics” which lists the electrical characteristics of the PoE evaluation
system.
“Installation” which describes the installation process.

Copyright © 2013
Rev 0.1 / 04 Aug 2013 Analog Mixed Signal Group

1 Enterprise, Aliso Viejo, CA 92656, USA; Phone (USA): [phone], (ROW): [phone] Fax: [phone]

Microsemi

4

PD-IM-7508 Evaluation Board - User Guide

2 Introduction

Microsemi’s Evaluation Board PD-IM-7508 provides the designer with the environment to evaluate the performance
and the implementation of 8-port Power over Ethernet (PoE), based on Microsemi’s PoE Devices (PD39100 &
PD69108).
Evaluation Board assists Switch designers to evaluate an IEEE- 802.3af-2003 and IEEE802.3at-2009PoE based
solution, with maximum flexibility and ease in configuration.
Microsemi’s PD69108 is a 8-port, mix-signal, high-voltage Power over Ethernet (PoE) Manager designed to support
IEEE- 802.3af-2003 and IEEE802.3at-2009 PoE applications.

Power Bank

Selection

PD69108 circuit

Front-end circuit

44-57V

PoE input

Input

PD70200 circuit

ESPI

Isolation

PoE controller

UART

Figure 1: PD-IM-7508 Evaluation Board – General View

This document details the steps and connection instructions required to install and operate this board.

Evaluation Board enables PoE designers to evaluate Microsemi's PoE solution with maximum flexibility and ease in
configuration.

Copyright © 2013
Rev 0.1 / 04 Aug 2013 Analog Mixed Signal Group

1 Enterprise, Aliso Viejo, CA 92656, USA; Phone (USA): [phone], (ROW): [phone] Fax: [phone]

Microsemi

5