Microsemi PD-9501GR User Manual

PD-9501GR/SP Midspan

Single-port, 60W Gigabit Midspan, 4-Pairs, 802.3at Compliant with Surge Protection

Key Features

• IEEE 802.3at compliant with 2-event classication

• IEEE 802.3af backward compatible

• Output power of 60W over 4-pairs is guaranteed

• Supports 10/100/1000Base-T applications

• Plug-and-play installation

• Safe: low power devices receive only the power they need

• Automatic detection and protection of non–standard
Ethernet terminals

• Compact design ts easily in WLAN access point and IP
camera installations

Overview

Microsemi’s PD-9501GR/SP is a single port solution for remote
powering of current as well as emerging high power applications.
The PD-9501GR/SP provides Surge Protection functionality optimal
for the installation of outdoor PDs. The PD-9501GR/SP is designed
specically to power IEEE 802.11n and IEEE 802.3at access points,
pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients
and other high power Ethernet end terminals with 60W of power,
and is also backward compatible and safe to use with any IEEE

802.3af terminal such as VoIP phones, IP cameras and wireless LAN

access points. It can power both existing 10/100Base-T devices and
emerging wireless 1000Base-T devices such as Wi-MAX and wireless
IEEE 802.11n access points. The PD-9501GR/SP provides power on
all 4-pairs while being backwards compatible to 802.3af and 802.3at
powered devices.

Switch

UPS

Specications

Feature Description

No. of Ports 1

Data Rates 10/100/1000 Mbps

Pin Assignment and Polarity:

Power over Ethernet
Output

Input Power
Requirements

Dimensions

Weight Bare unit: 0.75 lbs (340 g)

Indicators

Connectors Shielded RJ-45, EIA 568A and 568B

Environmental
Conditions

Reliability MTBF: 240, 000 hrs. @ 25º C

Data Pairs 1/2 (-) and 3/6 (+)
Spare Pairs 7/8 (-) and 4/5 (+)
Output Power Voltage: 55 VDC
User Port Power:

60 W over 4-pairs (Guaranteed)

AC Input Voltage: 100 to 240 VAC
AC Input Current: 1.5 A @100-240 VAC
AC Frequency: 50 to 60 Hz

62 mm (W) x 38 mm (H) x 151 mm (L)

2.44 in. x 1.5 in. x 5.94 in

AC Power (Yellow)

Channel Power (Green)

Operating Ambient Temperature:
14º to 104º F (-10º C to 40º C) @ 60 W
14º to 131º F (-10º C to 50º C) @ 30 W

Operating Humidity:
Maximum 90%, Non-condensing

Storage Temperature:
–4º to 158ºF (–20º to 70º C)

Storage Humidity:
Maximum 95%, Non-condensing

Data

Power

Data & Power

PoE Midspan

or or

IP Video Phone WLAN Access Point

PTZ Dome Camera

Figure 1: PD-9501GR/SP

Thermal Rating 30 BTU/Hr (@ 100 VAC)

Warranty 1-year

Regulatory

Electromagnetic
Emission & Immunity

Surge Protection

Safety Approvals

IEEE 802.3at (PoE), RoHS Compliant,
WEEE Compliant, CE

FCC Part 15, Class B
EN 55022 Class B (Emissions)
EN 55024 (Immunity), VCCI

EN 61000-4-5 (10/700 µsec, 4 KV)
Meets Surge Protection as specied in:
IEC-61643-21
GR-1089-CORE lightning protection

demands
ITU-T K.45 International standard

UL/cUL Per EN 60950-1
GS Mark Per EN 60950-1

PD-9501GR/SP Midspan

Single-port, 60W Gigabit Midspan, 4-Pairs, 802.3at Compliant with Surge Protection

Performance Data

W

60

30

-10 40

Power Out (W) @ Temp (ºC)

50

Figure 2: Performance Data

Ordering Information

Part Number Name Description

ºC

PD-9501GR/SP Microsemi PD-9501GR/SP

1-port, IEEE 802.3at
4-Pairs, Gigabit Midspan with surge protection

Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability
whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction
with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products,
alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine
suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely
with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information.
Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.

Microsemi Corporation (MSCC) oers a comprehensive portfolio of semiconductor and system solutions for communications, defense

& security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal inte-

grated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions,

setting the world’s standard for time; voice processing devices; RF solutions; discrete components; security technologies and scalable

anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services.

Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,600 employees globally. Learn more at www.microsemi.com.

Microsemi Corporate Headquarters
One Enterprise, Aliso Viejo, CA 92656 USA
Within the USA: [phone]
Outside the USA: [phone]
Sales: [phone]
Fax: [phone]
email: [e-mail]
www.microsemi.com

©2015 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks and
service marks are the property of their respective owners.

PD-9501 GR/SP Rev. 1.0 08-15